| Seq | Timestamp | Type | Name | Duration |
|---|---|---|---|---|
| 0/0 | 2026/10/01 23:28 | flow | patch-triage |
2mArgs:null Results: {
"EnableConfigs": [
"SWAP",
"SHMEM"
],
"FocusSymbols": [
"shmem_unuse_inode",
"shmem_unuse",
"unuse_pmd_range",
"unuse_vma",
"unuse_mm",
"try_to_unuse"
],
"KMSANReasoning": "The patch adds signal responsiveness checks (`signal_pending(current)`) inside `shmem_unuse_inode()` and `unuse_pmd_range()` during swapoff (`try_to_unuse()`), returning `-EINTR` if a signal is pending. It does not introduce, touch, or alter any uninitialized variables, heap/stack allocations, structure padding, or data copied to user space. Potential issues arising from interrupting swapoff early would pertain to resource cleanup or state consistency, which are covered by standard kernel bug detectors and KASAN, not KMSAN.",
"NeedsKMSAN": false,
"Reasoning": "The patch introduces signal interruption checks (signal_pending(current) returning -EINTR) within shmem_unuse_inode() in mm/shmem.c and unuse_pmd_range() in mm/swapfile.c during swapoff/unuse operations. This modifies reachable core memory management logic and alters control flow on interrupted swapoff, making it valuable to fuzz for error recovery bugs, state inconsistency, or race conditions when signals are delivered during swapoff.",
"WorthFuzzing": true
} |
| 1/1 | 2026/10/01 23:28 | action | read-patch-diff |
0mArgs:null Results: {
"PatchDiff": "commit 92df061062eeb27d34fe72ff01aab50bf3725382\nAuthor: syz-cluster \u003ctriage@syzkaller.com\u003e\nDate: Thu Oct 1 23:28:58 2026 +0000\n\n syz-cluster: applied patch under review\n\ndiff --git a/mm/shmem.c b/mm/shmem.c\nindex 848316eaa7f4f..6b2bc22310de2 100644\n--- a/mm/shmem.c\n+++ b/mm/shmem.c\n@@ -1542,6 +1542,10 @@ static int shmem_unuse_inode(struct inode *inode, unsigned int type)\n \t\tif (ret \u003c 0)\n \t\t\tbreak;\n \n+\t\tif (signal_pending(current)) {\n+\t\t\tret = -EINTR;\n+\t\t\tbreak;\n+\t\t}\n \t\tstart = indices[folio_batch_count(\u0026fbatch) - 1];\n \t} while (true);\n \ndiff --git a/mm/swapfile.c b/mm/swapfile.c\nindex 601979b97f95b..1d939be434a53 100644\n--- a/mm/swapfile.c\n+++ b/mm/swapfile.c\n@@ -2609,6 +2609,8 @@ static inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,\n \tpmd = pmd_offset(pud, addr);\n \tdo {\n \t\tcond_resched();\n+\t\tif (signal_pending(current))\n+\t\t\treturn -EINTR;\n \t\tnext = pmd_addr_end(addr, end);\n \t\tret = unuse_pte_range(vma, pmd, addr, next, type);\n \t\tif (ret)\n"
} |
| 2/1 | 2026/10/01 23:29 | agent | patch-evaluator |
1mModel:core Args: null Results: {
"EnableConfigs": [
"SWAP",
"SHMEM"
],
"FocusSymbols": [
"shmem_unuse_inode",
"shmem_unuse",
"unuse_pmd_range",
"unuse_vma",
"unuse_mm",
"try_to_unuse"
],
"Reasoning": "The patch introduces signal interruption checks (signal_pending(current) returning -EINTR) within shmem_unuse_inode() in mm/shmem.c and unuse_pmd_range() in mm/swapfile.c during swapoff/unuse operations. This modifies reachable core memory management logic and alters control flow on interrupted swapoff, making it valuable to fuzz for error recovery bugs, state inconsistency, or race conditions when signals are delivered during swapoff.",
"WorthFuzzing": true
}Instruction: You are an expert Linux kernel maintainer and security engineer.
Your job is to review a provided patch series and evaluate whether it warrants fuzzing with syzkaller.
IMPORTANT: The changes have ALREADY been applied and committed as the HEAD commit in
your workspace. Do NOT rely on internal assumptions. You must actively use your code access
tools to inspect the actual source code, callers, and surrounding context.
================================================================================
1. CORE TRIAGE PHILOSOPHY
================================================================================
The goal of patch fuzzing is to discover crashes, regressions, exposed latent bugs,
and newly triggered assertions introduced by the patch series.
- REACHABILITY IS THE PRIMARY GATE:
Fuzzing can only discover bugs in code that can actually execute in standard virtualized
environments (GCE or QEMU, utilizing software-emulated devices like USB gadgets, netdev, tun/tap).
If the modified code is structurally unreachable (see Section 2), it MUST NOT be fuzzed,
regardless of whether it adds assertions or complex logic.
- DO NOT BLINDLY TRUST "NO FUNCTIONAL CHANGE" (NFCI) OR "REFACTORING" CLAIMS:
Patch authors routinely label changes as "cleanups", "refactorings", or state
"No functional change intended". Do NOT take these claims at face value.
Code refactorings that rearrange logic, introduce helper functions, or alter state management
in core subsystems frequently introduce subtle semantic shifts or uncover latent kernel bugs.
If reachable executable code is modified or refactored, it MUST be fuzzed.
- NEW OR MODIFIED ASSERTIONS IN REACHABLE CODE MUST BE FUZZED:
When a patch introduces or modifies runtime checks or assertions (e.g., WARN_ON*, VM_WARN_ON*,
BUG_ON*, lockdep_assert*) in reachable code paths, it enforces new or stricter invariants.
Even if the author believes the invariant always holds, fuzzing is essential to verify whether
an unusual sequence of operations can violate it.
================================================================================
2. WHEN TO RETURN WorthFuzzing=false (NEGATIVE CRITERIA)
================================================================================
Return WorthFuzzing=false ONLY IF all modified code falls strictly into one or more of these categories:
- Non-kernel and non-executable changes:
* Modifications to Documentation/, comments, or spelling fixes.
* User-space directories, self-tests, samples, or scripts (e.g., tools/, samples/, scripts/, usr/)
that do not affect the compiled kernel image (vmlinux) or kernel modules.
* Purely decorative logging (e.g., message strings in pr_err, printk, dev_info) or tracepoints
that do not alter control flow or data structures.
* Build system or Kconfig changes that do not alter compiled C logic.
- Structurally unreachable hardware:
* Vendor-specific PCIe switches, SmartNICs, or GPU drivers (e.g., mlxsw, pds_core, qed,
ionic, amdgpu) requiring physical ASIC/PCIe cards not emulated in standard QEMU.
- Unreachable execution paths:
* Driver teardown callbacks (.remove, .shutdown, pci_unregister_driver) executed only during
physical PCI hot-unplug or manual sysfs driver unbinding.
* Code paths exclusive to architectures other than the target architecture.
================================================================================
3. WHEN TO RETURN WorthFuzzing=true (POSITIVE CRITERIA)
================================================================================
Return WorthFuzzing=true whenever the patch touches reachable executable code, including:
- Core Subsystems:
* Any logic modifications in memory management (mm/), synchronization/locking (kernel/locking/),
BPF, scheduler, core networking, VFS, or syscall handling.
- Refactorings and Code Cleanups:
* Any restructuring of reachable data structures, helper abstractions, or algorithm flows.
- Runtime Assertions and Defensive Checks:
* Any introduction or alteration of assertions (WARN_ON*, VM_WARN_ON*, BUG_ON*, etc.) in reachable paths.
- Reachable Drivers and Protocols:
* Drivers accessible via virtual buses (virtio, USB gadget, loopback, netlink, binder, sockets, etc.).
================================================================================
4. EXTRACTING FocusSymbols (PREVENTING DILUTION)
================================================================================
When WorthFuzzing=true, you must extract specific kernel functions into FocusSymbols to guide the fuzzer:
- AVOID UBIQUITOUS LIFECYCLE HOT-PATHS:
Do NOT list generic, ubiquitous functions called by almost every program in the corpus
(including, but not limited to: general memory allocators and deallocators, page fault
and trap handlers, or core synchronization primitives; this is not an exhaustive list).
Listing ubiquitous functions causes the fuzzer to classify thousands of unrelated tests as "focused",
which severely dilutes fuzzing effort away from the actual changes.
- TARGET SPECIFIC FEATURE LOGIC AND ENTRYPOINTS:
List functions that specifically implement the logic being added or altered, or direct API entrypoints
for the subsystem feature under review.
- HANDLING STATIC INLINE FUNCTIONS IN HEADERS (.h):
Compiler-inlined static functions (such as static inlines in mm/*.h or include/linux/*.h) lack
distinct symbol addresses in vmlinux and cannot be targeted directly by symbol coverage filters.
If the changes are primarily in static inline helpers, identify non-static, feature-specific caller
functions in .c files that exercise them (avoiding ubiquitous lifecycle wrappers).
================================================================================
5. IDENTIFYING EnableConfigs
================================================================================
Identify any specific CONFIG_ options required to properly compile and reach the modified code:
- Inspect Kconfig files and #ifdef guards; do not make assumptions.
- Check "depends on" lines in Kconfig to include any non-standard parent subsystem configs needed.
- Strip any 'CONFIG_' prefix (e.g., return "NET_IPV4" instead of "CONFIG_NET_IPV4").
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Target architecture: amd64
For your convenience, here is the diff of the changes:
commit 92df061062eeb27d34fe72ff01aab50bf3725382
Author: syz-cluster <triage@syzkaller.com>
Date: Thu Oct 1 23:28:58 2026 +0000
syz-cluster: applied patch under review
diff --git a/mm/shmem.c b/mm/shmem.c
index 848316eaa7f4f..6b2bc22310de2 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1542,6 +1542,10 @@ static int shmem_unuse_inode(struct inode *inode, unsigned int type)
if (ret < 0)
break;
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ break;
+ }
start = indices[folio_batch_count(&fbatch) - 1];
} while (true);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 601979b97f95b..1d939be434a53 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2609,6 +2609,8 @@ static inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,
pmd = pmd_offset(pud, addr);
do {
cond_resched();
+ if (signal_pending(current))
+ return -EINTR;
next = pmd_addr_end(addr, end);
ret = unuse_pte_range(vma, pmd, addr, next, type);
if (ret)
|
| 3/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 3062 output: 70 thoughts: 442 Thoughts: **Analyzing a Patch: Interrupt Handling in `shmem.c` and `swapfile.c`**
Okay, let's dive into this patch. My initial impression is that it's introducing interrupt handling, specifically checking for pending signals, within a couple of key memory management functions: `shmem_unuse_inode` in `shmem.c` and `unuse_pmd_range` in `swapfile.c`. The core of these functions appears to be iterating through memory structures – probably folios and page table entries (PTEs) – to unmap or free resources associated with shared memory and swap file entries, respectively.
The insertion of `if (signal_pending(current)) { ret = -EINTR; break; }` suggests that these operations can now be interrupted by signals. The functions are being modified to check if a signal is pending on the current task, and if so, they return `-EINTR` (Interrupted system call). This is pretty standard practice for long-running operations that should be interruptible. This looks like a preemptive addition to these memory management functions. My concern would be if this introduces a new timing issue.
Given my understanding of these areas, it's likely this change is aimed at improving responsiveness and interruptibility in scenarios where shared memory or swap operations are blocking, and a signal might indicate the need for immediate action (like process termination or resource cleanup). I think this is good, and aligns with best practices for kernel code, but now let's use `read-file` and `grepper` to inspect the surrounding functions to understand the full context.
|
| 4/2 | 2026/10/01 23:29 | tool | read-file |
0mArgs:{
"File": "mm/shmem.c",
"FirstLine": 1530,
"LineCount": 40
}Results: {
"Contents": "1530:\t\tpgoff_t indices[FOLIO_BATCH_SIZE];\n1531:\t\tint ret = 0;\n1532:\t\n1533:\t\tdo {\n1534:\t\t\tfolio_batch_init(\u0026fbatch);\n1535:\t\t\tif (!shmem_find_swap_entries(mapping, start, \u0026fbatch,\n1536:\t\t\t\t\t\t indices, type)) {\n1537:\t\t\t\tret = 0;\n1538:\t\t\t\tbreak;\n1539:\t\t\t}\n1540:\t\n1541:\t\t\tret = shmem_unuse_swap_entries(inode, \u0026fbatch, indices);\n1542:\t\t\tif (ret \u003c 0)\n1543:\t\t\t\tbreak;\n1544:\t\n1545:\t\t\tif (signal_pending(current)) {\n1546:\t\t\t\tret = -EINTR;\n1547:\t\t\t\tbreak;\n1548:\t\t\t}\n1549:\t\t\tstart = indices[folio_batch_count(\u0026fbatch) - 1];\n1550:\t\t} while (true);\n1551:\t\n1552:\t\treturn ret;\n1553:\t}\n1554:\t\n1555:\t/*\n1556:\t * Read all the shared memory data that resides in the swap\n1557:\t * device 'type' back into memory, so the swap device can be\n1558:\t * unused.\n1559:\t */\n1560:\tint shmem_unuse(unsigned int type)\n1561:\t{\n1562:\t\tstruct shmem_inode_info *info, *next;\n1563:\t\tint error = 0;\n1564:\t\n1565:\t\tif (list_empty(\u0026shmem_swaplist))\n1566:\t\t\treturn 0;\n1567:\t\n1568:\t\tspin_lock(\u0026shmem_swaplist_lock);\n1569:\tstart_over:\n"
} |
| 5/2 | 2026/10/01 23:29 | tool | read-file |
0mArgs:{
"File": "mm/swapfile.c",
"FirstLine": 2595,
"LineCount": 50
}Results: {
"Contents": "2595:\t\n2596:\t\tif (pte)\n2597:\t\t\tpte_unmap(pte);\n2598:\t\treturn 0;\n2599:\t}\n2600:\t\n2601:\tstatic inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,\n2602:\t\t\t\t\tunsigned long addr, unsigned long end,\n2603:\t\t\t\t\tunsigned int type)\n2604:\t{\n2605:\t\tpmd_t *pmd;\n2606:\t\tunsigned long next;\n2607:\t\tint ret;\n2608:\t\n2609:\t\tpmd = pmd_offset(pud, addr);\n2610:\t\tdo {\n2611:\t\t\tcond_resched();\n2612:\t\t\tif (signal_pending(current))\n2613:\t\t\t\treturn -EINTR;\n2614:\t\t\tnext = pmd_addr_end(addr, end);\n2615:\t\t\tret = unuse_pte_range(vma, pmd, addr, next, type);\n2616:\t\t\tif (ret)\n2617:\t\t\t\treturn ret;\n2618:\t\t} while (pmd++, addr = next, addr != end);\n2619:\t\treturn 0;\n2620:\t}\n2621:\t\n2622:\tstatic inline int unuse_pud_range(struct vm_area_struct *vma, p4d_t *p4d,\n2623:\t\t\t\t\tunsigned long addr, unsigned long end,\n2624:\t\t\t\t\tunsigned int type)\n2625:\t{\n2626:\t\tpud_t *pud;\n2627:\t\tunsigned long next;\n2628:\t\tint ret;\n2629:\t\n2630:\t\tpud = pud_offset(p4d, addr);\n2631:\t\tdo {\n2632:\t\t\tnext = pud_addr_end(addr, end);\n2633:\t\t\tif (pud_none_or_clear_bad(pud))\n2634:\t\t\t\tcontinue;\n2635:\t\t\tret = unuse_pmd_range(vma, pud, addr, next, type);\n2636:\t\t\tif (ret)\n2637:\t\t\t\treturn ret;\n2638:\t\t} while (pud++, addr = next, addr != end);\n2639:\t\treturn 0;\n2640:\t}\n2641:\t\n2642:\tstatic inline int unuse_p4d_range(struct vm_area_struct *vma, pgd_t *pgd,\n2643:\t\t\t\t\tunsigned long addr, unsigned long end,\n2644:\t\t\t\t\tunsigned int type)\n"
} |
| 6/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 5157 output: 58 thoughts: 85 Thoughts: Here's my summary, as I delve into this code: **Analyzing Memory Management and Swapfile Interaction** Okay, so I'm looking at `mm/shmem.c` and `mm/swapfile.c`. Clearly, this is all about memory management, specifically within the swapoff functionality (triggered by the `swapoff` syscall). It appears that swapoff handles un-using swap entries for both shared memory (`shmem`) and general virtual memory areas (VMAs) in the page tables. My immediate next step is to trace the execution flow. I need to understand the relationship between shared memory and the more general mechanisms. I want to pinpoint exactly how `shmem_unuse_inode` is called. It will give me a clear picture of how swap entries for shared memory segments are cleaned up. Then, I'll need to confirm that `unuse_pmd_range` is being called correctly to handle the general VMA unmapping. I need to see how the two work together to completely remove swap entries. |
| 7/2 | 2026/10/01 23:29 | tool | grepper |
0mArgs:{
"Expression": "shmem_unuse_inode",
"PathPrefix": "mm/"
}Results: {
"Output": "mm/shmem.c=1497=static int shmem_unuse_swap_entries(struct inode *inode,\n--\nmm/shmem.c-1524- */\nmm/shmem.c:1525:static int shmem_unuse_inode(struct inode *inode, unsigned int type)\nmm/shmem.c-1526-{\n--\nmm/shmem.c=1560=int shmem_unuse(unsigned int type)\n--\nmm/shmem.c-1583-\nmm/shmem.c:1584:\t\terror = shmem_unuse_inode(\u0026info-\u003evfs_inode, type);\nmm/shmem.c-1585-\t\tcond_resched();\n--\nmm/shmem.c=2050=static struct folio *shmem_swap_alloc_folio(struct inode *inode,\n--\nmm/shmem.c-2081- * usual swapin of shmem_get_folio_gfp(), or by the less common swapoff of\nmm/shmem.c:2082: * shmem_unuse_inode()), it may have been read in earlier from swap, in\nmm/shmem.c-2083- * ignorance of the mapping it belongs to. If that mapping has special\n"
} |
| 8/2 | 2026/10/01 23:29 | tool | grepper |
0mArgs:{
"Expression": "unuse_pmd_range",
"PathPrefix": "mm/"
}Results: {
"Output": "mm/swapfile.c=2532=static int unuse_pte_range(struct vm_area_struct *vma, pmd_t *pmd,\n--\nmm/swapfile.c-2600-\nmm/swapfile.c:2601:static inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,\nmm/swapfile.c-2602-\t\t\t\tunsigned long addr, unsigned long end,\n--\nmm/swapfile.c=2622=static inline int unuse_pud_range(struct vm_area_struct *vma, p4d_t *p4d,\n--\nmm/swapfile.c-2634-\t\t\tcontinue;\nmm/swapfile.c:2635:\t\tret = unuse_pmd_range(vma, pud, addr, next, type);\nmm/swapfile.c-2636-\t\tif (ret)\n"
} |
| 9/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 6092 output: 27 thoughts: 43 Thoughts: Okay, let's dive into this. Here's how I'd approach understanding the call paths of `shmem_unuse` and `unuse_mm`, and how they're related, focusing on the `try_to_unuse` function as a key: **Investigating Memory Unuse Procedures** My immediate concern is understanding the sequence of events leading to memory unuse operations, specifically `shmem_unuse` and `unuse_mm`. I need to trace their calling contexts to grasp the overall memory management strategy. Therefore, I should start by examining how these functions are invoked within the kernel. I need to figure out the conditions which trigger them. The logical first step seems to be to analyze `try_to_unuse` within `mm/swapfile.c`. This suggests that `try_to_unuse` acts as a central control point or intermediary, potentially coordinating the unuse processes across different memory management components. It's likely that `shmem_unuse` and `unuse_mm` are called from within `try_to_unuse`, or are called based on the decisions made by this function. I need to determine the specific criteria and logic within `try_to_unuse` that decide the course of action. This is the entry point I'll start with. |
| 10/2 | 2026/10/01 23:29 | tool | grepper |
0mArgs:{
"Expression": "shmem_unuse",
"PathPrefix": "mm/"
}Results: {
"Output": "mm/filemap.c=4618=static void filemap_cachestat(struct address_space *mapping,\n--\nmm/filemap.c-4677-\t\t\t\t * inode means we beat\nmm/filemap.c:4678:\t\t\t\t * shmem_unuse(). rcu_read_lock()\nmm/filemap.c-4679-\t\t\t\t * ensures swapoff waits for us before\n--\nmm/shmem.c=706=static const char *shmem_format_huge(int huge)\n--\nmm/shmem.c-727-\nmm/shmem.c:728:static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo,\nmm/shmem.c-729-\t\tstruct shrink_control *sc, unsigned long nr_to_free)\n--\nmm/shmem.c-834-\nmm/shmem.c:835:static long shmem_unused_huge_scan(struct super_block *sb,\nmm/shmem.c-836-\t\tstruct shrink_control *sc)\n--\nmm/shmem.c-842-\nmm/shmem.c:843:\treturn shmem_unused_huge_shrink(sbinfo, sc, 0);\nmm/shmem.c-844-}\nmm/shmem.c-845-\nmm/shmem.c:846:static long shmem_unused_huge_count(struct super_block *sb,\nmm/shmem.c-847-\t\tstruct shrink_control *sc)\n--\nmm/shmem.c-865-\nmm/shmem.c:866:static unsigned long shmem_unused_huge_shrink(struct shmem_sb_info *sbinfo,\nmm/shmem.c-867-\t\tstruct shrink_control *sc, unsigned long nr_to_free)\n--\nmm/shmem.c=1410=static void shmem_evict_inode(struct inode *inode)\n--\nmm/shmem.c-1429-\t\twhile (!list_empty(\u0026info-\u003eswaplist)) {\nmm/shmem.c:1430:\t\t\t/* Wait while shmem_unuse() is scanning this inode... */\nmm/shmem.c-1431-\t\t\twait_var_event(\u0026info-\u003estop_eviction,\n--\nmm/shmem.c=1455=static unsigned int shmem_find_swap_entries(struct address_space *mapping,\n--\nmm/shmem.c-1496- */\nmm/shmem.c:1497:static int shmem_unuse_swap_entries(struct inode *inode,\nmm/shmem.c-1498-\t\tstruct folio_batch *fbatch, pgoff_t *indices)\n--\nmm/shmem.c-1524- */\nmm/shmem.c:1525:static int shmem_unuse_inode(struct inode *inode, unsigned int type)\nmm/shmem.c-1526-{\n--\nmm/shmem.c-1540-\nmm/shmem.c:1541:\t\tret = shmem_unuse_swap_entries(inode, \u0026fbatch, indices);\nmm/shmem.c-1542-\t\tif (ret \u003c 0)\n--\nmm/shmem.c-1559- */\nmm/shmem.c:1560:int shmem_unuse(unsigned int type)\nmm/shmem.c-1561-{\n--\nmm/shmem.c-1583-\nmm/shmem.c:1584:\t\terror = shmem_unuse_inode(\u0026info-\u003evfs_inode, type);\nmm/shmem.c-1585-\t\tcond_resched();\n--\nmm/shmem.c=1611=int shmem_writeout(struct swap_io_ctx *ctx, struct folio *folio,\n--\nmm/shmem.c-1704-\t\t/*\nmm/shmem.c:1705:\t\t * Add inode to shmem_unuse()'s list of swapped-out inodes,\nmm/shmem.c-1706-\t\t * if it's not already there. Do it now before the folio is\n--\nmm/shmem.c-1708-\t\t * protects the inode from eviction. And do it now, after\nmm/shmem.c:1709:\t\t * we've incremented swapped, because shmem_unuse() will\nmm/shmem.c-1710-\t\t * prune a !swapped inode from the swaplist.\n--\nmm/shmem.c=1946=static struct folio *shmem_alloc_and_add_folio(struct vm_fault *vmf,\n--\nmm/shmem.c-2019-\t\t */\nmm/shmem.c:2020:\t\tshmem_unused_huge_shrink(sbinfo, NULL, pages);\nmm/shmem.c-2021-\t\t/*\n--\nmm/shmem.c=2050=static struct folio *shmem_swap_alloc_folio(struct inode *inode,\n--\nmm/shmem.c-2081- * usual swapin of shmem_get_folio_gfp(), or by the less common swapoff of\nmm/shmem.c:2082: * shmem_unuse_inode()), it may have been read in earlier from swap, in\nmm/shmem.c-2083- * ignorance of the mapping it belongs to. If that mapping has special\n--\nmm/shmem.c=2435=static int shmem_get_folio_gfp(struct inode *inode, pgoff_t index,\n--\nmm/shmem.c-2557-\t\t * _careful to defend against unlocked access to\nmm/shmem.c:2558:\t\t * -\u003eshrink_list in shmem_unused_huge_shrink()\nmm/shmem.c-2559-\t\t */\n--\nmm/shmem.c=5244=static const struct super_operations shmem_ops = {\n--\nmm/shmem.c-5258-#ifdef CONFIG_TRANSPARENT_HUGEPAGE\nmm/shmem.c:5259:\t.nr_cached_objects\t= shmem_unused_huge_count,\nmm/shmem.c:5260:\t.free_cached_objects\t= shmem_unused_huge_scan,\nmm/shmem.c-5261-#endif\n--\nmm/shmem.c=5752=void __init shmem_init(void)\n--\nmm/shmem.c-5759-\nmm/shmem.c:5760:int shmem_unuse(unsigned int type)\nmm/shmem.c-5761-{\n--\nmm/swapfile.c=2738=static int try_to_unuse(unsigned int type)\n--\nmm/swapfile.c-2752-retry:\nmm/swapfile.c:2753:\tretval = shmem_unuse(type);\nmm/swapfile.c-2754-\tif (retval)\n"
} |
| 11/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 8230 output: 35 thoughts: 42 Thoughts: Okay, let's dive into this. Here's how I'd approach this, thinking through the process: **Diving into `try_to_unuse` in `mm/swapfile.c`** Alright, I need to understand how the un-use mechanism works, specifically within the context of swap files. I'm going to focus my attention on the `try_to_unuse` function in `mm/swapfile.c`. My goal here is to grasp the interplay between `shmem_unuse` and `unuse_pmd_range`. I know these are crucial functions in freeing up memory associated with swap entries, but I need to see *how* they're orchestrated. I suspect that `try_to_unuse` is the central orchestrator, the driver of the un-use process. It likely makes the critical decisions about when and how to call these lower-level routines. By understanding the calling sequence and the surrounding logic in `try_to_unuse`, I'll get a clearer picture of how the kernel manages memory associated with swapped-out shared memory regions. Specifically, I'm curious about the conditions that determine which function is called, and how they interact to achieve the goal of freeing up pages. I'm ready to dig in and trace the calls. |
| 12/2 | 2026/10/01 23:29 | tool | read-file |
0mArgs:{
"File": "mm/swapfile.c",
"FirstLine": 2735,
"LineCount": 80
}Results: {
"Contents": "2735:\t\treturn i;\n2736:\t}\n2737:\t\n2738:\tstatic int try_to_unuse(unsigned int type)\n2739:\t{\n2740:\t\tstruct mm_struct *prev_mm;\n2741:\t\tstruct mm_struct *mm;\n2742:\t\tstruct list_head *p;\n2743:\t\tint retval = 0;\n2744:\t\tstruct swap_info_struct *si = swap_info[type];\n2745:\t\tstruct folio *folio;\n2746:\t\tswp_entry_t entry;\n2747:\t\tunsigned int i;\n2748:\t\n2749:\t\tif (!swap_usage_in_pages(si))\n2750:\t\t\tgoto success;\n2751:\t\n2752:\tretry:\n2753:\t\tretval = shmem_unuse(type);\n2754:\t\tif (retval)\n2755:\t\t\treturn retval;\n2756:\t\n2757:\t\tprev_mm = \u0026init_mm;\n2758:\t\tmmget(prev_mm);\n2759:\t\n2760:\t\tspin_lock(\u0026mmlist_lock);\n2761:\t\tp = \u0026init_mm.mmlist;\n2762:\t\twhile (swap_usage_in_pages(si) \u0026\u0026\n2763:\t\t !signal_pending(current) \u0026\u0026\n2764:\t\t (p = p-\u003enext) != \u0026init_mm.mmlist) {\n2765:\t\n2766:\t\t\tmm = list_entry(p, struct mm_struct, mmlist);\n2767:\t\t\tif (!mmget_not_zero(mm))\n2768:\t\t\t\tcontinue;\n2769:\t\t\tspin_unlock(\u0026mmlist_lock);\n2770:\t\t\tmmput(prev_mm);\n2771:\t\t\tprev_mm = mm;\n2772:\t\t\tretval = unuse_mm(mm, type);\n2773:\t\t\tif (retval) {\n2774:\t\t\t\tmmput(prev_mm);\n2775:\t\t\t\treturn retval;\n2776:\t\t\t}\n2777:\t\n2778:\t\t\t/*\n2779:\t\t\t * Make sure that we aren't completely killing\n2780:\t\t\t * interactive performance.\n2781:\t\t\t */\n2782:\t\t\tcond_resched();\n2783:\t\t\tspin_lock(\u0026mmlist_lock);\n2784:\t\t}\n2785:\t\tspin_unlock(\u0026mmlist_lock);\n2786:\t\n2787:\t\tmmput(prev_mm);\n2788:\t\n2789:\t\ti = 0;\n2790:\t\twhile (swap_usage_in_pages(si) \u0026\u0026\n2791:\t\t !signal_pending(current) \u0026\u0026\n2792:\t\t (i = find_next_to_unuse(si, i)) != 0) {\n2793:\t\n2794:\t\t\tentry = swp_entry(type, i);\n2795:\t\t\tfolio = swap_cache_get_folio(entry);\n2796:\t\t\tif (!folio)\n2797:\t\t\t\tcontinue;\n2798:\t\n2799:\t\t\t/*\n2800:\t\t\t * It is conceivable that a racing task removed this folio from\n2801:\t\t\t * swap cache just before we acquired the page lock. The folio\n2802:\t\t\t * might even be back in swap cache on another swap area. But\n2803:\t\t\t * that is okay, folio_free_swap() only removes stale folios.\n2804:\t\t\t */\n2805:\t\t\tfolio_lock(folio);\n2806:\t\t\tfolio_wait_writeback(folio);\n2807:\t\t\tfolio_free_swap(folio);\n2808:\t\t\tfolio_unlock(folio);\n2809:\t\t\tfolio_put(folio);\n2810:\t\t}\n2811:\t\n2812:\t\t/*\n2813:\t\t * Lets check again to see if there are still swap entries in the map.\n2814:\t\t * If yes, we would need to do retry the unuse logic again.\n"
} |
| 13/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 9677 output: 28 thoughts: 16 Thoughts: Here's my take on that thought process: **Tracing the Usage of `try_to_unuse`** Okay, so I need to understand the implications of this `try_to_unuse` function. My first step is clear: I need to pinpoint every single location in the codebase where this function is called. Understanding its call sites is fundamental to grasping its role and the potential impact of changes or removals. I need to know the context of its usage before I can even begin to think about its purpose, potential issues, or any optimizations. Let's see where that takes us. |
| 14/2 | 2026/10/01 23:29 | tool | grepper |
0mArgs:{
"Expression": "try_to_unuse",
"PathPrefix": "mm/"
}Results: {
"Output": "mm/swapfile.c=1316=static void swap_range_free(struct swap_info_struct *si, unsigned long offset,\n--\nmm/swapfile.c-1338-\t/*\nmm/swapfile.c:1339:\t * Make sure that try_to_unuse() observes si-\u003einuse_pages reaching 0\nmm/swapfile.c-1340-\t * only after the above cleanups are done.\n--\nmm/swapfile.c=2419=static int unuse_pte(struct vm_area_struct *vma, pmd_t *pmd,\n--\nmm/swapfile.c-2430-\t * If the folio is removed from swap cache by others, continue to\nmm/swapfile.c:2431:\t * unuse other PTEs. try_to_unuse may try again if we missed this one.\nmm/swapfile.c-2432-\t */\n--\nmm/swapfile.c=2711=static unsigned int find_next_to_unuse(struct swap_info_struct *si,\n--\nmm/swapfile.c-2737-\nmm/swapfile.c:2738:static int try_to_unuse(unsigned int type)\nmm/swapfile.c-2739-{\n--\nmm/swapfile.c-2832-\t/*\nmm/swapfile.c:2833:\t * Make sure that further cleanups after try_to_unuse() returns happen\nmm/swapfile.c-2834-\t * after swap_range_free() reduces si-\u003einuse_pages to 0.\n--\nmm/swapfile.c-2840-/*\nmm/swapfile.c:2841: * After a successful try_to_unuse, if no swap is now in use, we know\nmm/swapfile.c-2842- * we can empty the mmlist. swap_lock must be held on entry and exit.\n--\nmm/swapfile.c=3084=SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)\n--\nmm/swapfile.c-3144-\tset_current_oom_origin();\nmm/swapfile.c:3145:\terr = try_to_unuse(p-\u003etype);\nmm/swapfile.c-3146-\tclear_current_oom_origin();\n--\nmm/zswap.c=1681=void zswap_swapoff(int type)\n--\nmm/zswap.c-1688-\nmm/zswap.c:1689:\t/* try_to_unuse() invalidated all the entries already */\nmm/zswap.c-1690-\tfor (i = 0; i \u003c nr_zswap_trees[type]; i++)\n"
} |
| 15/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 10552 output: 35 thoughts: 836 Thoughts: **Analyzing the `sys_swapoff` Implementation**
Okay, so `try_to_unuse` is part of `sys_swapoff`. My immediate instinct is to check the git log of commit `92df061062eeb27d34fe72ff01aab50bf3725382` to get the context – the commit message, the original commit info, that kind of thing. But wait, I don't have direct access to a `git log` tool here. Hmm, I have read-file, grepper, codesearch-dir-index, and set-results. So, I need to work with what's available.
Let's dive into the code changes. I'm focusing on what's been added within `mm/shmem.c` and `mm/swapfile.c`. In `mm/shmem.c`, specifically `shmem_unuse_inode`, the key addition is `if (signal_pending(current)) { ret = -EINTR; break; }`. Similarly, in `mm/swapfile.c`, within `unuse_pmd_range`, there's `if (signal_pending(current)) return -EINTR;`.
Ah, I see it! The fundamental change is that during the swap-off process (triggered by `sys_swapoff`), the code now checks for pending signals. Previously, `shmem_unuse_inode` and `unuse_pmd_range` were not interrupted when a signal was received, meaning that a SIGINT, SIGKILL, or syzkaller signal wouldn't interrupt the swap off process. Now, if a signal is pending, they immediately return `-EINTR`. That's the crux of the modification.
Now, let's trace what happens when `-EINTR` gets returned. In `shmem_unuse`, we see that the return value of `shmem_unuse_inode` is checked, and any error will break out of this call. Similarly, `try_to_unuse` calls `shmem_unuse` and returns any errors from it. In the `unuse_pmd_range` path, `-EINTR` is bubbled up: `unuse_pmd_range` -> `unuse_pud_range` -> `unuse_p4d_range` -> `unuse_pgd_range` -> `unuse_vma` -> `unuse_mm` -> `try_to_unuse`. In `try_to_unuse`, the return from `unuse_mm` is checked.
My next step is to examine what happens in `SYSCALL_DEFINE1(swapoff, ...)` when `try_to_unuse` returns `-EINTR`. Let me quickly check `mm/swapfile.c` around line 3145...
|
| 16/2 | 2026/10/01 23:29 | tool | read-file |
0mArgs:{
"File": "mm/swapfile.c",
"FirstLine": 3140,
"LineCount": 60
}Results: {
"Contents": "3140:\t\tspin_unlock(\u0026swap_lock);\n3141:\t\n3142:\t\twait_for_allocation(p);\n3143:\t\n3144:\t\tset_current_oom_origin();\n3145:\t\terr = try_to_unuse(p-\u003etype);\n3146:\t\tclear_current_oom_origin();\n3147:\t\n3148:\t\tif (err) {\n3149:\t\t\t/* re-insert swap space back into swap_list */\n3150:\t\t\treinsert_swap_info(p);\n3151:\t\t\tgoto out_dput;\n3152:\t\t}\n3153:\t\n3154:\t\t/*\n3155:\t\t * Wait for swap operations protected by get/put_swap_device()\n3156:\t\t * to complete. Because of synchronize_rcu() here, all swap\n3157:\t\t * operations protected by RCU reader side lock (including any\n3158:\t\t * spinlock) will be waited too. This makes it easy to\n3159:\t\t * prevent folio_test_swapcache() and the following swap cache\n3160:\t\t * operations from racing with swapoff.\n3161:\t\t */\n3162:\t\tpercpu_ref_kill(\u0026p-\u003eusers);\n3163:\t\tsynchronize_rcu();\n3164:\t\twait_for_completion(\u0026p-\u003ecomp);\n3165:\t\n3166:\t\tflush_work(\u0026p-\u003ediscard_work);\n3167:\t\tflush_work(\u0026p-\u003ereclaim_work);\n3168:\t\tflush_percpu_swap_cluster(p);\n3169:\t\n3170:\t\tdestroy_swap_extents(p, p-\u003eswap_file);\n3171:\t\n3172:\t\tif (!(p-\u003eflags \u0026 SWP_SOLIDSTATE))\n3173:\t\t\tatomic_dec(\u0026nr_rotate_swap);\n3174:\t\n3175:\t\tmutex_lock(\u0026swapon_mutex);\n3176:\t\tspin_lock(\u0026swap_lock);\n3177:\t\tspin_lock(\u0026p-\u003elock);\n3178:\t\tdrain_mmlist();\n3179:\t\n3180:\t\tswap_file = p-\u003eswap_file;\n3181:\t\tp-\u003eswap_file = NULL;\n3182:\t\tmaxpages = p-\u003emax;\n3183:\t\tcluster_info = p-\u003ecluster_info;\n3184:\t\tp-\u003emax = 0;\n3185:\t\tp-\u003ecluster_info = NULL;\n3186:\t\tspin_unlock(\u0026p-\u003elock);\n3187:\t\tspin_unlock(\u0026swap_lock);\n3188:\t\tarch_swap_invalidate_area(p-\u003etype);\n3189:\t\tzswap_swapoff(p-\u003etype);\n3190:\t\tmutex_unlock(\u0026swapon_mutex);\n3191:\t\tkfree(p-\u003eglobal_cluster);\n3192:\t\tp-\u003eglobal_cluster = NULL;\n3193:\t\tfree_swap_cluster_info(cluster_info, maxpages);\n3194:\t\n3195:\t\tinode = mapping-\u003ehost;\n3196:\t\n3197:\t\tinode_lock(inode);\n3198:\t\tinode-\u003ei_flags \u0026= ~S_SWAPFILE;\n3199:\t\tinode_unlock(inode);\n"
} |
| 17/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 12930 output: 34 thoughts: 50 Thoughts: Here's my analysis of the provided snippet, framed as my own thought process: **Diving Deep into Error Handling with `try_to_unuse` and `reinsert_swap_info`** Okay, so I'm focusing on how `try_to_unuse` handles errors, specifically when it returns an `err` value (like `-EINTR`). This means something interrupted the process of un-using the resource. The key point here is that when that happens, the code calls `reinsert_swap_info(p)`. That's the critical connection I need to understand. Clearly, `reinsert_swap_info` must be designed to handle the situation where the un-use attempt failed. Now, my next step is clear – I need to dig into the definition and behavior of `reinsert_swap_info`. I need to figure out what it's *doing* in this context. Is it re-queuing something? Restoring some state? Correcting a race condition? Understanding the interaction between these two functions is paramount to grasping the complete error handling strategy here. It is critical to ensure data integrity and prevent system instability during an interrupted un-use operation. |
| 18/2 | 2026/10/01 23:29 | tool | read-file |
0mArgs:{
"File": "mm/swapfile.c",
"FirstLine": 870,
"LineCount": 40
}Results: {
"Contents": " 870:\t\n 871:\t\t/*\n 872:\t\t * Recheck the range no matter reclaim succeeded or not, the slot\n 873:\t\t * could have been be freed while we are not holding the lock.\n 874:\t\t */\n 875:\t\tfor (offset = start; offset \u003c end; offset++) {\n 876:\t\t\tswp_tb = __swap_table_get(ci, offset % SWAPFILE_CLUSTER);\n 877:\t\t\tif (!swp_tb_is_null(swp_tb))\n 878:\t\t\t\treturn false;\n 879:\t\t}\n 880:\t\n 881:\t\treturn true;\n 882:\t}\n 883:\t\n 884:\tstatic bool cluster_scan_range(struct swap_info_struct *si,\n 885:\t\t\t\t struct swap_cluster_info *ci,\n 886:\t\t\t\t unsigned long offset, unsigned int nr_pages,\n 887:\t\t\t\t bool *need_reclaim)\n 888:\t{\n 889:\t\tunsigned int ci_off = offset % SWAPFILE_CLUSTER;\n 890:\t\tunsigned int ci_end = ci_off + nr_pages;\n 891:\t\tunsigned long swp_tb;\n 892:\t\n 893:\t\tdo {\n 894:\t\t\tswp_tb = __swap_table_get(ci, ci_off);\n 895:\t\t\tif (swp_tb_is_null(swp_tb))\n 896:\t\t\t\tcontinue;\n 897:\t\t\tif (swp_tb_is_folio(swp_tb) \u0026\u0026 !__swp_tb_get_count(swp_tb)) {\n 898:\t\t\t\tif (!vm_swap_full())\n 899:\t\t\t\t\treturn false;\n 900:\t\t\t\t*need_reclaim = true;\n 901:\t\t\t\tcontinue;\n 902:\t\t\t}\n 903:\t\t\t/* Slot with zero count can only be NULL or folio */\n 904:\t\t\tVM_WARN_ON(!swp_tb_get_count(swp_tb));\n 905:\t\t\treturn false;\n 906:\t\t} while (++ci_off \u003c ci_end);\n 907:\t\n 908:\t\treturn true;\n 909:\t}\n"
} |
| 19/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 13874 output: 28 thoughts: 12 Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience: **Hunting Down `reinsert_swap_info`** Okay, so I need to track down where this function, `reinsert_swap_info`, is being used. It’s likely a critical piece of the puzzle, probably involved in some kind of memory management, swap operations, or possibly even a more specialized caching strategy. Given the name, I'd guess it's dealing with re-inserting information related to swapped-out data, but the exact context is, of course, critical. My initial approach will be to perform a targeted search within the relevant codebase. I’ll start with grep, assuming it's a C/C++ codebase, as it's the most straightforward method to start with. If it's a larger project, I'll need to use my usual tools to pinpoint where it is most likely to be. I'll need to define what the relevant project is, which will impact how i approach the search. Then, I will focus on more advanced techniques like cross-referencing and symbol lookups (like ctags, or whatever the project uses) to understand its definition and usage patterns. If it's a kernel function, then I'll use ksyms to find out the file where the function is defined. It's also possible that it is imported, and then I'll need to figure out where the import is handled. Understanding how it interacts with other system components will be key to understanding its overall impact and purpose. The goal is to build a complete picture of its role within the system. After i have the definition, I will then analyze its calling locations and understand its relationships to other functions and modules to fully understand its utility. |
| 20/2 | 2026/10/01 23:29 | tool | grepper |
0mArgs:{
"Expression": "reinsert_swap_info",
"PathPrefix": "mm/"
}Results: {
"Output": "mm/swapfile.c=3004=static void enable_swap_info(struct swap_info_struct *si)\n--\nmm/swapfile.c-3013-\nmm/swapfile.c:3014:static void reinsert_swap_info(struct swap_info_struct *si)\nmm/swapfile.c-3015-{\n--\nmm/swapfile.c=3084=SYSCALL_DEFINE1(swapoff, const char __user *, specialfile)\n--\nmm/swapfile.c-3149-\t\t/* re-insert swap space back into swap_list */\nmm/swapfile.c:3150:\t\treinsert_swap_info(p);\nmm/swapfile.c-3151-\t\tgoto out_dput;\n"
} |
| 21/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 14487 output: 35 thoughts: 12 Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience, and delivered as a first-person summary: **Diving into `reinsert_swap_info`** Alright, let's get down to brass tacks. I'm focusing on the `reinsert_swap_info` function now. My immediate concern is understanding its core purpose and how it fits into the broader picture. I'm already anticipating potential complexities in its implementation, likely related to data structures, memory management, and edge-case handling, especially if we're dealing with concurrent access or intricate swap logic. My initial scan will be for its inputs and outputs, paying close attention to any pointers or references it uses, and quickly grasping how data is moved, modified, or preserved. I'll need to rapidly ascertain whether it's a stand-alone function or tightly coupled with other modules, because dependencies are always important. I'll be looking for any signs of optimization or clever tricks – hopefully, well-commented ones! – but also for potential pitfalls like race conditions, memory leaks, or unhandled exceptions that could be hiding in there. The goal is to fully understand its function and its role in a complex software system. |
| 22/2 | 2026/10/01 23:29 | tool | read-file |
0mArgs:{
"File": "mm/swapfile.c",
"FirstLine": 3010,
"LineCount": 40
}Results: {
"Contents": "3010:\t\tspin_unlock(\u0026si-\u003elock);\n3011:\t\tspin_unlock(\u0026swap_lock);\n3012:\t}\n3013:\t\n3014:\tstatic void reinsert_swap_info(struct swap_info_struct *si)\n3015:\t{\n3016:\t\tspin_lock(\u0026swap_lock);\n3017:\t\tspin_lock(\u0026si-\u003elock);\n3018:\t\t_enable_swap_info(si);\n3019:\t\tspin_unlock(\u0026si-\u003elock);\n3020:\t\tspin_unlock(\u0026swap_lock);\n3021:\t}\n3022:\t\n3023:\t/*\n3024:\t * Called after clearing SWP_WRITEOK, ensures cluster_alloc_range\n3025:\t * see the updated flags, so there will be no more allocations.\n3026:\t */\n3027:\tstatic void wait_for_allocation(struct swap_info_struct *si)\n3028:\t{\n3029:\t\tunsigned long offset;\n3030:\t\tunsigned long end = ALIGN(si-\u003emax, SWAPFILE_CLUSTER);\n3031:\t\tstruct swap_cluster_info *ci;\n3032:\t\n3033:\t\tBUG_ON(si-\u003eflags \u0026 SWP_WRITEOK);\n3034:\t\n3035:\t\tfor (offset = 0; offset \u003c end; offset += SWAPFILE_CLUSTER) {\n3036:\t\t\tci = swap_cluster_lock(si, offset);\n3037:\t\t\tswap_cluster_unlock(ci);\n3038:\t\t}\n3039:\t}\n3040:\t\n3041:\tstatic void free_swap_cluster_info(struct swap_cluster_info *cluster_info,\n3042:\t\t\t\t\t unsigned long maxpages)\n3043:\t{\n3044:\t\tstruct swap_cluster_info *ci;\n3045:\t\tint i, nr_clusters = DIV_ROUND_UP(maxpages, SWAPFILE_CLUSTER);\n3046:\t\n3047:\t\tif (!cluster_info)\n3048:\t\t\treturn;\n3049:\t\tfor (i = 0; i \u003c nr_clusters; i++) {\n"
} |
| 23/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 15383 output: 35 thoughts: 1045 Thoughts: **WorthFuzzing Analysis: Signal Handling During Memory Unuse/Swapoff** Okay, let's break this down. We've got a situation where `shmem_unuse_inode` and `unuse_pmd_range` now check for pending signals (`signal_pending(current)`) and abort with `-EINTR`. This is a change because previously, signal checks were only in the `try_to_unuse` loop, not within the core functions that `try_to_unuse` calls. The concern is that these functions, especially with large shared memory or extensive page tables, could block for a significant time without interruption, leading to potential issues if a signal arrives. My evaluation starts by checking if this is even relevant in a typical environment. Standard virtualized environments like QEMU and GCE are definitely in scope. We're dealing with `swapoff`, which is a standard syscall, and both `shmem` and swap are core Linux memory management features. Syzkaller, a common fuzzer, already exercises these features with `swapon`, `swapoff`, `memfd_create`, shared memory, and signal injection. So, reachability is not a problem. Now, let's see if this should be flagged as "WorthFuzzing". It's not a non-kernel change, structurally unreachable hardware, or an unreachable path. This definitively falls under the "Core Subsystems" category: these changes are within `mm/shmem.c` and `mm/swapfile.c`, precisely memory management code! The key question then becomes: does aborting mid-way through `shmem_unuse_inode` or `unuse_pmd_range` with an `-EINTR` introduce subtle race conditions, inconsistent states, refcount leaks, or locking issues? The answer is YES! Handling `-EINTR` during memory unuse and swapoff is notoriously tricky. If the unuse process is interrupted halfway, we could have partially read folios, dirty lock states, swap slot references in a transitional state, and so on. Syzkaller is perfect for this, since it's constantly sending signals and testing cancellation paths. So, definitely WorthFuzzing = TRUE. Finally, regarding "FocusSymbols", we need to avoid the generic, ubiquitous functions and target the specific logic added or altered. I was originally thinking `shmem_unuse_inode` and `unuse_pmd_range`, but `unuse_pmd_range` is marked `static inline`! That means it won't have a distinct symbol address. Checking the callers, the chain goes through `unuse_pud_range`, `unuse_p4d_range`, `unuse_pgd_range`, `unuse_vma`, `unuse_mm`, and `try_to_unuse`. I should check callers of `unuse_pmd_range` in `mm/swapfile.c` to see if there are good functions to fuzz here. In short, there is high value in targeting `swapoff` with `shmem` and signal generation for fuzzing. |
| 24/2 | 2026/10/01 23:29 | tool | read-file |
0mArgs:{
"File": "mm/swapfile.c",
"FirstLine": 2655,
"LineCount": 60
}Results: {
"Contents": "2655:\t\t\tret = unuse_pud_range(vma, p4d, addr, next, type);\n2656:\t\t\tif (ret)\n2657:\t\t\t\treturn ret;\n2658:\t\t} while (p4d++, addr = next, addr != end);\n2659:\t\treturn 0;\n2660:\t}\n2661:\t\n2662:\tstatic int unuse_vma(struct vm_area_struct *vma, unsigned int type)\n2663:\t{\n2664:\t\tpgd_t *pgd;\n2665:\t\tunsigned long addr, end, next;\n2666:\t\tint ret;\n2667:\t\n2668:\t\taddr = vma-\u003evm_start;\n2669:\t\tend = vma-\u003evm_end;\n2670:\t\n2671:\t\tpgd = pgd_offset(vma-\u003evm_mm, addr);\n2672:\t\tdo {\n2673:\t\t\tnext = pgd_addr_end(addr, end);\n2674:\t\t\tif (pgd_none_or_clear_bad(pgd))\n2675:\t\t\t\tcontinue;\n2676:\t\t\tret = unuse_p4d_range(vma, pgd, addr, next, type);\n2677:\t\t\tif (ret)\n2678:\t\t\t\treturn ret;\n2679:\t\t} while (pgd++, addr = next, addr != end);\n2680:\t\treturn 0;\n2681:\t}\n2682:\t\n2683:\tstatic int unuse_mm(struct mm_struct *mm, unsigned int type)\n2684:\t{\n2685:\t\tstruct vm_area_struct *vma;\n2686:\t\tint ret = 0;\n2687:\t\tVMA_ITERATOR(vmi, mm, 0);\n2688:\t\n2689:\t\tmmap_read_lock(mm);\n2690:\t\tif (check_stable_address_space(mm))\n2691:\t\t\tgoto unlock;\n2692:\t\tfor_each_vma(vmi, vma) {\n2693:\t\t\tif (vma-\u003eanon_vma \u0026\u0026 !is_vm_hugetlb_page(vma)) {\n2694:\t\t\t\tret = unuse_vma(vma, type);\n2695:\t\t\t\tif (ret)\n2696:\t\t\t\t\tbreak;\n2697:\t\t\t}\n2698:\t\n2699:\t\t\tcond_resched();\n2700:\t\t}\n2701:\tunlock:\n2702:\t\tmmap_read_unlock(mm);\n2703:\t\treturn ret;\n2704:\t}\n2705:\t\n2706:\t/*\n2707:\t * Scan swap table from current position to next entry still in use.\n2708:\t * Return 0 if there are no inuse entries after prev till end of\n2709:\t * the map.\n2710:\t */\n2711:\tstatic unsigned int find_next_to_unuse(struct swap_info_struct *si,\n2712:\t\t\t\t\t\tunsigned int prev)\n2713:\t{\n2714:\t\tunsigned int i;\n"
} |
| 25/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 17990 output: 25 thoughts: 457 Thoughts: **Analyzing Memory Management and Swap Operations** Okay, so I'm diving into this memory management code, and my initial observations are about the scope of these functions. `unuse_mm` is not inline, it is a static int. Then `try_to_unuse` is also static, which is good to know. But, then `shmem_unuse` is global, it is declared as `int shmem_unuse(unsigned int type)`! And then `shmem_unuse_inode` is static. Now, I need to check what about swapoff functions? Let's verify `shmem_unuse` itself. Alright, it's a non-static, global function. Let's see what `shmem_unuse_inode` is doing, it's static in mm/shmem.c. Okay, let's keep an inventory: `unuse_mm`, `try_to_unuse`, `shmem_unuse`, and `shmem_unuse_inode`. I need to figure out the scope of these functions in relation to each other. Hmm, there is only one other function, `unuse_pud_range`. That implies these functions directly work on the ranges, or alter the ranges. So it looks like these are the primary symbols in this area: `shmem_unuse_inode`, `shmem_unuse`, `unuse_mm`, and `try_to_unuse`. Wait, what about system calls? I need to consider `__x64_sys_swapoff`, `__se_sys_swapoff`, and `sys_swapoff`. They might be relevant. Also, the function `try_to_unuse`. I should probably focus on how syzkaller targets these symbols. It targets symbol names in vmlinux. That means I should focus on `try_to_unuse`, `shmem_unuse`, `shmem_unuse_inode`, and `unuse_mm`. They are specific functions in mm, and not part of the standard library. Finally, let me double-check the EnableConfigs. I need to figure out what config options are required for `shmem.c` and `swapfile.c`. So let's look at the Kconfig files for both `SWAP` and `SHMEM`. That should give me the configuration context I need. |
| 26/2 | 2026/10/01 23:29 | tool | grepper |
0mError:no matches Args: {
"Expression": "config SHMEM",
"PathPrefix": "mm/"
}Results: {
"error": "no matches"
} |
| 27/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 19001 output: 25 thoughts: 13 Thoughts: Okay, here's my summarized thought process, assuming I'm an expert and this is a deep dive into kernel configuration: **Diving into the Configuration Labyrinth** Alright, I'm thinking I need to find the configuration option for SHMEM. My gut feeling tells me it's probably somewhere in the initialization phase, or at least a section closely tied to system setup. So, my initial thought is to navigate to the `init/Kconfig` file. That's the first logical place to start looking for a global configuration item like this. It's a common convention, and a good starting point for kernel configuration exploration. Time to open that file and get to work. |
| 28/2 | 2026/10/01 23:29 | tool | grepper |
0mArgs:{
"Expression": "config SHMEM",
"PathPrefix": "init/"
}Results: {
"Output": "init/Kconfig=1932=config EVENTFD\n--\ninit/Kconfig-1940-\ninit/Kconfig:1941:config SHMEM\ninit/Kconfig-1942-\tbool \"Use full shmem filesystem\" if EXPERT\n"
} |
| 29/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 19259 output: 25 thoughts: 18 Thoughts: Here's my thought process, as it stands: **Locating the SWAP Configuration Options** Okay, so I need to find where the kernel's swap configuration options are defined. The most likely places to start looking are the `mm/Kconfig` and `init/Kconfig` files. That makes the most sense given my prior experience with kernel configuration - Memory Management (`mm`) and Initialization (`init`) are the usual suspects for anything related to swap space. These Kconfig files are the heart of the kernel's configuration system, so it's the natural place to start my search for the options related to SWAP. Let's start with those. |
| 30/2 | 2026/10/01 23:29 | tool | grepper |
0mArgs:{
"Expression": "config SWAP",
"PathPrefix": "mm/"
}Results: {
"Output": "mm/Kconfig=9=config ARCH_NO_SWAP\n--\nmm/Kconfig-11-\nmm/Kconfig:12:menuconfig SWAP\nmm/Kconfig-13-\tbool \"Support for paging of anonymous memory (swap)\"\n"
} |
| 31/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 19514 output: 32 thoughts: 27 Thoughts: Okay, let's dive in. Here's my thought process laid out: **Checking the Build Process for Shared Memory and Swap Files** Alright, before I go any further down this rabbit hole, I need a clearer picture of how these shmem and swapfile object files are built. I know they're critical components, so understanding the build process is essential to tackling this issue. My immediate thought is to check the `Makefile` located in the `mm/` directory. That's the logical place to find the build rules, dependencies, and compilation flags associated with these specific modules: `shmem.o` and `swapfile.o`. The Makefile will undoubtedly shed light on the intricacies of their compilation. I need to be sure I understand the fundamentals before I start digging deeper into possible bug fixes. |
| 32/2 | 2026/10/01 23:29 | tool | grepper |
0mArgs:{
"Expression": "(shmem|swapfile)\\.o",
"PathPrefix": "mm/Makefile"
}Results: {
"Output": "mm/Makefile=51=obj-y\t\t\t:= filemap.o mempool.o oom_kill.o fadvise.o \\\n--\nmm/Makefile-53-\t\t\t readahead.o folio.o truncate.o vmscan.o shrinker.o \\\nmm/Makefile:54:\t\t\t shmem.o util.o mmzone.o vmstat.o backing-dev.o \\\nmm/Makefile-55-\t\t\t mm_init.o percpu.o slab_common.o \\\n--\nmm/Makefile=76=endif\nmm/Makefile-77-\nmm/Makefile:78:obj-$(CONFIG_SWAP)\t+= page_io.o swap_state.o swapfile.o\nmm/Makefile-79-obj-$(CONFIG_ZSWAP)\t+= zswap.o\n"
} |
| 33/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 19948 output: 30 thoughts: 64 Thoughts: Okay, here's my summary, considering my expertise: **Checking Swap and Shared Memory Dependencies** Right, `swapfile.o` unequivocally needs `CONFIG_SWAP`. That's straightforward and expected. Now, I'm thinking about the implications for shared memory, specifically `shmem.c`. The potential for interactions between swap and shared memory always warrants a deeper look. I need to confirm if the `shmem_unuse_inode` function (or parts of it) are conditionalized based on either `CONFIG_SWAP` or `CONFIG_SHMEM`. My intuition leans toward it being primarily tied to `CONFIG_SHMEM`, given its core shared memory functions, but I can't be sure without a quick check. This conditional compilation is key, because the interplay of swap space with shared memory can create tricky situations relating to memory reclaim, swapping, and potential race conditions, if not handled carefully in the kernel code. |
| 34/2 | 2026/10/01 23:29 | tool | grepper |
0mError:no matches Args: {
"Expression": "CONFIG_SWAP",
"PathPrefix": "mm/shmem.c"
}Results: {
"error": "no matches"
} |
| 35/2 | 2026/10/01 23:29 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 20253 output: 35 thoughts: 90 Thoughts: Okay, let me think this through. **Investigating Shared Memory Unuse Protection** Wait a minute, I need to understand how the `shmem_unuse_inode` function is protected in `mm/shmem.c`. That's a critical area, and I want to be certain about the locking and synchronization. Right, let me pull up the source code. Let's start with a look around lines 5755-5765 of `mm/shmem.c`. I also see a `shmem_unuse` function around line 5760, and sometimes related code is nearby, so let's widen our search slightly and examine lines 5750-5770. This should give me a good initial context. I'll need to scrutinize the surrounding code for any mutexes, spinlocks, or other mechanisms that are used to ensure data integrity during the unuse operation. I'm looking for the guarding mechanism. |
| 36/2 | 2026/10/01 23:30 | tool | read-file |
0mArgs:{
"File": "mm/shmem.c",
"FirstLine": 5745,
"LineCount": 35
}Results: {
"Contents": "5745:\t\t.name\t\t= \"tmpfs\",\n5746:\t\t.init_fs_context = ramfs_init_fs_context,\n5747:\t\t.parameters\t= ramfs_fs_parameters,\n5748:\t\t.kill_sb\t= ramfs_kill_sb,\n5749:\t\t.fs_flags\t= FS_USERNS_MOUNT,\n5750:\t};\n5751:\t\n5752:\tvoid __init shmem_init(void)\n5753:\t{\n5754:\t\tBUG_ON(register_filesystem(\u0026shmem_fs_type) != 0);\n5755:\t\n5756:\t\tshm_mnt = kern_mount(\u0026shmem_fs_type);\n5757:\t\tBUG_ON(IS_ERR(shm_mnt));\n5758:\t}\n5759:\t\n5760:\tint shmem_unuse(unsigned int type)\n5761:\t{\n5762:\t\treturn 0;\n5763:\t}\n5764:\t\n5765:\tint shmem_lock(struct file *file, int lock, struct ucounts *ucounts)\n5766:\t{\n5767:\t\treturn 0;\n5768:\t}\n5769:\t\n5770:\tvoid shmem_unlock_mapping(struct address_space *mapping)\n5771:\t{\n5772:\t}\n5773:\t\n5774:\t#ifdef CONFIG_MMU\n5775:\tunsigned long shmem_get_unmapped_area(struct file *file,\n5776:\t\t\t\t\t unsigned long addr, unsigned long len,\n5777:\t\t\t\t\t unsigned long pgoff, unsigned long flags)\n5778:\t{\n5779:\t\treturn mm_get_unmapped_area(file, addr, len, pgoff, flags);\n"
} |
| 37/2 | 2026/10/01 23:30 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 21097 output: 32 thoughts: 28 Thoughts: Okay, here's my attempt at summarizing those thoughts from an expert's perspective, using the first person and aiming for that "fulsome summary" feel: **Hunting Down That Shmem Configuration** Alright, let's dive in. I need to figure out where this `#ifdef CONFIG_SHMEM` macro is being used. Based on my experience with this code base, it's likely lurking somewhere significant, probably in a core module. I'm going to start by eyeballing around line 1500, but I have a feeling it might also be somewhere around line 5700, too. Based on my current mental map of the system, I can't immediately recall exactly which files define it, so I'll need to locate the definition first. Then I can figure out the scope of it. This isn't usually a trivial find, so I'll need to be methodical. It's probably related to shared memory allocation or management, so I'll keep that functionality in mind while I'm looking. The 1500 and 5700 line numbers are simply educated guesses based on the general code organization and module sizes I'm used to. With shared memory, its importance in the code base often dictates its position near the high level functions that use it. Let's start the search... |
| 38/2 | 2026/10/01 23:30 | tool | grepper |
0mArgs:{
"Expression": "#.*CONFIG_SHMEM",
"PathPrefix": "mm/shmem.c"
}Results: {
"Output": "mm/shmem.c=47=static struct vfsmount *shm_mnt __ro_after_init;\nmm/shmem.c-48-\nmm/shmem.c:49:#ifdef CONFIG_SHMEM\nmm/shmem.c-50-/*\n--\nmm/shmem.c=5729=__setup(\"thp_shmem=\", setup_thp_shmem);\n--\nmm/shmem.c-5732-\nmm/shmem.c:5733:#else /* !CONFIG_SHMEM */\nmm/shmem.c-5734-\n--\nmm/shmem.c=5802=static inline struct inode *shmem_get_inode(struct mnt_idmap *idmap,\n--\nmm/shmem.c-5809-\nmm/shmem.c:5810:#endif /* CONFIG_SHMEM */\nmm/shmem.c-5811-\n--\nmm/shmem.c=5964=struct folio *shmem_read_folio_gfp(struct address_space *mapping,\n--\nmm/shmem.c-5966-{\nmm/shmem.c:5967:#ifdef CONFIG_SHMEM\nmm/shmem.c-5968-\tstruct inode *inode = mapping-\u003ehost;\n"
} |
| 39/2 | 2026/10/01 23:30 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 21775 output: 33 thoughts: 80 Thoughts: Okay, here's my thought process on this, distilled into a first-person expert summary: **Investigating the Interplay of SHMEM and SWAP** Alright, so I'm looking at this `shmem_unuse_inode` function and immediately noticing it's tucked away under a `#ifdef CONFIG_SHMEM` preprocessor directive. That's a key observation. Then I see this `swapfile.o` object file is built *with* `CONFIG_SWAP` enabled. This naturally raises a question in my mind: Are these features, `SHMEM` and `SWAP`, somehow related? Does `CONFIG_SHMEM` depend on `CONFIG_SWAP`, or vice-versa, or on any other configuration options for that matter? I need to understand the dependencies here. The best place to start that investigation is undoubtedly `init/Kconfig`. That file should tell the tale of these relationships. I'll head there next. |
| 40/2 | 2026/10/01 23:30 | tool | read-file |
0mArgs:{
"File": "init/Kconfig",
"FirstLine": 1940,
"LineCount": 20
}Results: {
"Contents": "1940:\t\n1941:\tconfig SHMEM\n1942:\t\tbool \"Use full shmem filesystem\" if EXPERT\n1943:\t\tdefault y\n1944:\t\tdepends on MMU\n1945:\t\thelp\n1946:\t\t The shmem is an internal filesystem used to manage shared memory.\n1947:\t\t It is backed by swap and manages resource limits. It is also exported\n1948:\t\t to userspace as tmpfs if TMPFS is enabled. Disabling this\n1949:\t\t option replaces shmem and tmpfs with the much simpler ramfs code,\n1950:\t\t which may be appropriate on small systems without swap.\n1951:\t\n1952:\tconfig AIO\n1953:\t\tbool \"Enable AIO support\" if EXPERT\n1954:\t\tdefault y\n1955:\t\thelp\n1956:\t\t This option enables POSIX asynchronous I/O which may by used\n1957:\t\t by some high performance threaded applications. Disabling\n1958:\t\t this option saves about 7k.\n1959:\t\n"
} |
| 41/2 | 2026/10/01 23:30 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 22386 output: 31 thoughts: 14 Thoughts: Okay, here's my interpretation of that prompt, delivered as requested: **My Immediate Assessment** Alright, "CONFIG_SWAP" in "mm/Kconfig"... my mind immediately jumps to the kernel configuration options and the memory management (mm) subsystem. I know *exactly* what this refers to. It's the flag that controls whether swap space and swapping are enabled within the Linux kernel. This is fundamental, right? We're talking about extending available memory by writing less-frequently-used pages out to disk, generally a swap partition or swap file. It's a trade-off. It provides more virtual memory at the cost of performance, because disk I/O is *way* slower than RAM access. We have to consider the implications on system performance and responsiveness. I automatically start thinking about scenarios where this might be critical or detrimental: embedded systems with limited RAM, servers needing high-performance with lots of memory, etc. The impact is huge. |
| 42/2 | 2026/10/01 23:30 | tool | read-file |
0mArgs:{
"File": "mm/Kconfig",
"FirstLine": 10,
"LineCount": 25
}Results: {
"Contents": " 10:\t\tbool\n 11:\t\n 12:\tmenuconfig SWAP\n 13:\t\tbool \"Support for paging of anonymous memory (swap)\"\n 14:\t\tdepends on MMU \u0026\u0026 BLOCK \u0026\u0026 !ARCH_NO_SWAP\n 15:\t\tdefault y\n 16:\t\thelp\n 17:\t\t This option allows you to choose whether you want to have support\n 18:\t\t for so called swap devices or swap files in your kernel that are\n 19:\t\t used to provide more virtual memory than the actual RAM present\n 20:\t\t in your computer. If unsure say Y.\n 21:\t\n 22:\tconfig ZSWAP\n 23:\t\tbool \"Compressed cache for swap pages\"\n 24:\t\tdepends on SWAP\n 25:\t\tselect CRYPTO\n 26:\t\tselect ZSMALLOC\n 27:\t\thelp\n 28:\t\t A lightweight compressed cache for swap pages. It takes\n 29:\t\t pages that are in the process of being swapped out and attempts to\n 30:\t\t compress them into a dynamically allocated RAM-based memory pool.\n 31:\t\t This can result in a significant I/O reduction on swap device and,\n 32:\t\t in the case where decompressing from RAM is faster than swap device\n 33:\t\t reads, can also improve workload performance.\n 34:\t\n"
} |
| 43/2 | 2026/10/01 23:30 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 22983 output: 31 thoughts: 94 Thoughts: Okay, here's my summary, taking the role of the expert: **Investigating Swap and Shared Memory Dependencies** Right, so I'm working with this modified code, and I'm pretty sure I need both `CONFIG_SWAP` and `CONFIG_SHMEM` enabled for it to compile cleanly. But now I'm thinking, specifically about `mm/shmem.c`, I need to double-check that the code using `shmem_unuse_inode` also correctly handles the `CONFIG_SWAP` dependency. It just struck me as a potential point of integration that could be missed. I need to confirm whether `shmem_unuse_inode` implicitly relies on swap being enabled or if there are any conditional compilation directives that take care of that. So, I need to open `mm/shmem.c` and have a good look around the definition of `shmem_unuse_inode` to see if there are any `#ifdef CONFIG_SWAP` or similar conditional checks right there, or around any functions it calls that might use swap. I'm going to scan the code there to make sure there's no subtle assumption leading to potential issues down the line. |
| 44/2 | 2026/10/01 23:30 | tool | grepper |
0mError:no matches Args: {
"Expression": "#ifdef.*SWAP",
"PathPrefix": "mm/shmem.c"
}Results: {
"error": "no matches"
} |
| 45/2 | 2026/10/01 23:30 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 23377 output: 189 thoughts: 1249 Thoughts: **Analysis of Swapoff Unuse Path for Fuzzing**
Alright, let's break this down. My goal is to figure out the best approach for fuzzing this specific swapoff unuse path. First, I need to identify the relevant configurations and functions. It looks like `shmem_unuse` is the key. Let me confirm: yes, `shmem_unuse` is indeed called by `try_to_unuse` in `mm/swapfile.c`, which, in turn, is only compiled if `CONFIG_SWAP=y`. And the complete `shmem` feature is enabled by `CONFIG_SHMEM`. So, `SWAP` and `SHMEM` are the two main configuration options to enable for this target. `TMPFS` is optional, but `SHMEM` is default, so it's likely already enabled in most cases. So, `EnableConfigs` will be `["SWAP", "SHMEM"]`.
Now for the *critical* part: identifying the right `FocusSymbols`. Let's see... looking at the code, I find these functions: In `mm/shmem.c`: `shmem_unuse_inode` and `shmem_unuse`. In `mm/swapfile.c`: `unuse_pmd_range` – which is `static inline`. Ah, the static inline issue... `unuse_pmd_range` might be inlined into other functions – `unuse_pud_range`, `unuse_p4d_range`, `unuse_pgd_range`, and ultimately, `unuse_vma`. Which in turn, is called by `unuse_mm`, and that's called by `try_to_unuse`. Good! But, are they ubiquitous? No, let's make sure. The key here is not picking ubiquitous memory management functions, so `try_to_unuse`, `shmem_unuse`, and `shmem_unuse_inode`, `unuse_mm`, and `unuse_vma`, and `unuse_pmd_range`, are specific. They're all called as part of `sys_swapoff`.
So, the coverage here should be excellent: Including `shmem_unuse_inode`, `shmem_unuse`, `unuse_pmd_range`, `unuse_vma`, `unuse_mm`, and `try_to_unuse` will comprehensively cover the swapoff unuse path.
Now, a closer look at the actual code changes. `shmem_unuse_inode` and `unuse_pmd_range` both introduce an early exit on `signal_pending(current)` returning `-EINTR`. Okay, so this is about signal interruption handling during swapoff. *Definitely* worth fuzzing. Interrupting a swapoff operation mid-flight could uncover race conditions, locking issues, or memory leaks during abort/rollback operations (`reinsert_swap_info`). This is easily testable in a standard QEMU amd64 environment via the `swapoff` syscall. This makes `WorthFuzzing` definitely true.
Alright, the fuzzing parameters are coming together now. Time to prepare the `set-results` parameters:
- `WorthFuzzing: true`
- `Reasoning:` The patch adds signal interruption handling (`signal_pending(current)` returning `-EINTR`) into `shmem_unuse_inode` and `unuse_pmd_range` during swapoff operations. These changes affect reachable core memory management code in `mm/shmem.c` and `mm/swapfile.c`. Fuzzing `swapoff` concurrently with signals can expose latent issues or race conditions in abort/rollback handling when unuse operations are interrupted.
- `FocusSymbols:`
- `shmem_unuse_inode`
- `shmem_unuse`
- `unuse_pmd_range`
- `unuse_vma`
- `unuse_mm`
- `try_to_unuse`
- `EnableConfigs:`
- `SWAP`
- `SHMEM`
And now, let's invoke `set-results`.
|
| 46/2 | 2026/10/01 23:30 | tool | set-results |
0mArgs:{
"EnableConfigs": [
"SWAP",
"SHMEM"
],
"FocusSymbols": [
"shmem_unuse_inode",
"shmem_unuse",
"unuse_pmd_range",
"unuse_vma",
"unuse_mm",
"try_to_unuse"
],
"Reasoning": "The patch introduces signal interruption checks (signal_pending(current) returning -EINTR) within shmem_unuse_inode() in mm/shmem.c and unuse_pmd_range() in mm/swapfile.c during swapoff/unuse operations. This modifies reachable core memory management logic and alters control flow on interrupted swapoff, making it valuable to fuzz for error recovery bugs, state inconsistency, or race conditions when signals are delivered during swapoff.",
"WorthFuzzing": true
}Results: {
"EnableConfigs": [
"SWAP",
"SHMEM"
],
"FocusSymbols": [
"shmem_unuse_inode",
"shmem_unuse",
"unuse_pmd_range",
"unuse_vma",
"unuse_mm",
"try_to_unuse"
],
"Reasoning": "The patch introduces signal interruption checks (signal_pending(current) returning -EINTR) within shmem_unuse_inode() in mm/shmem.c and unuse_pmd_range() in mm/swapfile.c during swapoff/unuse operations. This modifies reachable core memory management logic and alters control flow on interrupted swapoff, making it valuable to fuzz for error recovery bugs, state inconsistency, or race conditions when signals are delivered during swapoff.",
"WorthFuzzing": true
} |
| 47/1 | 2026/10/01 23:30 | action | If |
0mArgs:{
"WorthFuzzing": true
}Results: null |
| 48/2 | 2026/10/01 23:30 | agent | kmsan-evaluator |
0mModel:core Args: null Results: {
"KMSANReasoning": "The patch adds signal responsiveness checks (`signal_pending(current)`) inside `shmem_unuse_inode()` and `unuse_pmd_range()` during swapoff (`try_to_unuse()`), returning `-EINTR` if a signal is pending. It does not introduce, touch, or alter any uninitialized variables, heap/stack allocations, structure padding, or data copied to user space. Potential issues arising from interrupting swapoff early would pertain to resource cleanup or state consistency, which are covered by standard kernel bug detectors and KASAN, not KMSAN.",
"NeedsKMSAN": false
}Instruction: You are an expert Linux kernel security engineer specializing in kernel memory
error detectors (KASAN and KMSAN). Your job is to review the provided patch series and
determine if the code changes justify spawning a dedicated KMSAN (KernelMemorySanitizer)
fuzzing session in addition to standard KASAN fuzzing.
CRITICAL DISTINCTION BETWEEN KASAN AND KMSAN:
- Standard KASAN kernel builds (upstream-apparmor-kasan.config) already enable
a comprehensive suite of debugging tools and sanitizers, including KASAN
(out-of-bounds accesses, use-after-free, double free, invalid free), LOCKDEP
(locking bugs and deadlocks), UB-sanitizers, and memory corruption checks.
- KMSAN (KernelMemorySanitizer) detects reads of UNINITIALIZED memory (stack, heap,
or page allocations) and kernel-to-user memory info-leaks.
Rule: THERE IS NO SENSE IN RUNNING A KMSAN SESSION IF A BUG CAN BE CAUGHT BY KASAN,
LOCKDEP, OR OTHER STANDARD BUG DETECTORS.
A dedicated KMSAN fuzzing session incurs significant resource costs. You must ONLY
set NeedsKMSAN=true if the code changes introduce or expose UNINITIALIZED MEMORY risks
that are detected ONLY by KMSAN.
Look holistically at the patch series and surrounding code. Even if no direct
uninitialized field accesses or new buffer allocations are added in the diff itself,
a patch may alter control flow, bounds checking, or data length calculations in ways
that change how the rest of the code operates on existing buffers (e.g. allowing
uninitialized stack/heap memory to be read, copied to user space, or used in control
flow). Do not hesitate to use your code access tools to inspect the surrounding code,
called functions, and callers.
Set NeedsKMSAN=true ONLY IF the patch introduces or modifies:
1. Kernel structures sent to user space (via copy_to_user, put_user, netlink skb
attributes, ioctl output arguments, socket options, or BPF buffers) where fields
or structure padding might not be fully initialized/zeroed.
2. Conditional logic or branching that depends on potentially uninitialized variables
or struct fields.
3. Allocation or initialization of complex data structures where uninitialized fields
could be read later in reachable code paths.
4. Bounds checks, lengths, or logic in a way that allows surrounding code to access
uninitialized bytes of existing buffers.
Set NeedsKMSAN=false IF:
- The code changes primarily risk out-of-bounds access, array overflows, NULL pointer
dereferences, locking deadlocks, or use-after-free bugs (these are already caught
by KASAN, LOCKDEP, or standard bug detectors).
- All stack/heap structures touched or introduced by the patch are fully zeroed
or initialized (e.g. using = {0}, memset, kzalloc) before being read or copied.
- The patch does not introduce any risk of uninitialized memory usage or info-leaks.
Use your code access tools to inspect the surrounding code if necessary, then provide
detailed KMSANReasoning contrasting KASAN vs KMSAN applicability for this patch.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Target architecture: amd64
For your convenience, here is the diff of the changes:
commit 92df061062eeb27d34fe72ff01aab50bf3725382
Author: syz-cluster <triage@syzkaller.com>
Date: Thu Oct 1 23:28:58 2026 +0000
syz-cluster: applied patch under review
diff --git a/mm/shmem.c b/mm/shmem.c
index 848316eaa7f4f..6b2bc22310de2 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1542,6 +1542,10 @@ static int shmem_unuse_inode(struct inode *inode, unsigned int type)
if (ret < 0)
break;
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ break;
+ }
start = indices[folio_batch_count(&fbatch) - 1];
} while (true);
diff --git a/mm/swapfile.c b/mm/swapfile.c
index 601979b97f95b..1d939be434a53 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -2609,6 +2609,8 @@ static inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,
pmd = pmd_offset(pud, addr);
do {
cond_resched();
+ if (signal_pending(current))
+ return -EINTR;
next = pmd_addr_end(addr, end);
ret = unuse_pte_range(vma, pmd, addr, next, type);
if (ret)
|
| 49/3 | 2026/10/01 23:30 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 2274 output: 70 thoughts: 465 Thoughts: **Analyzing the Recent Kernel Memory Management Patch** Okay, so I'm looking at this patch and it's modifying `mm/shmem.c` and `mm/swapfile.c`. My initial thought is that these are crucial components, and any changes here warrant careful scrutiny. The diff shows the addition of a `signal_pending(current)` check within a loop in both files. Specifically, in `shmem.c` it's within the `shmem_unuse_inode` function, likely related to releasing shared memory pages. And in `swapfile.c`, it's within `unuse_pmd_range`, which has to do with freeing page table entries associated with swap. Essentially, these additions are interruptible points in long-running memory unmapping operations. It appears to be an effort to make these unmapping functions responsive to signals, allowing for preemption or termination if, for example, a process is killed or receives an interrupt. The loops they are within suggests they could be long operations. I'll need to confirm what the loops do. My immediate questions are: * **Why now?** What's the driving force behind this change? Is there a known issue of unresponsiveness or lock contention during these operations? * **What are the performance implications?** Introducing these checks adds a small overhead. Are we talking about a negligible performance impact, or something more significant, especially on heavily loaded systems? I need to look at benchmarks or discussion around it. * **Are there any race conditions introduced or alleviated?** By introducing an interruptible point, is there a risk of creating new race conditions, or is this actually helping prevent them? I need to analyze the surrounding code carefully. * **Is `-EINTR` the right error code?** This might be okay for the context, but I should verify the code's behavior for that signal. I'm now going to use `read-file` or `grepper` to get a more comprehensive view of these functions and the surrounding code. I need to understand the control flow, the data structures involved, and any relevant locking mechanisms to make a definitive assessment. I should look for places in `shmem.c` and `swapfile.c` where these unuse operations are called and what the caller does with the return value. This will help determine how significant these changes are and if the error handling is adequate. |
| 50/3 | 2026/10/01 23:30 | tool | read-file |
0mArgs:{
"File": "mm/shmem.c",
"FirstLine": 1520,
"LineCount": 40
}Results: {
"Contents": "1520:\t}\n1521:\t\n1522:\t/*\n1523:\t * If swap found in inode, free it and move page from swapcache to filecache.\n1524:\t */\n1525:\tstatic int shmem_unuse_inode(struct inode *inode, unsigned int type)\n1526:\t{\n1527:\t\tstruct address_space *mapping = inode-\u003ei_mapping;\n1528:\t\tpgoff_t start = 0;\n1529:\t\tstruct folio_batch fbatch;\n1530:\t\tpgoff_t indices[FOLIO_BATCH_SIZE];\n1531:\t\tint ret = 0;\n1532:\t\n1533:\t\tdo {\n1534:\t\t\tfolio_batch_init(\u0026fbatch);\n1535:\t\t\tif (!shmem_find_swap_entries(mapping, start, \u0026fbatch,\n1536:\t\t\t\t\t\t indices, type)) {\n1537:\t\t\t\tret = 0;\n1538:\t\t\t\tbreak;\n1539:\t\t\t}\n1540:\t\n1541:\t\t\tret = shmem_unuse_swap_entries(inode, \u0026fbatch, indices);\n1542:\t\t\tif (ret \u003c 0)\n1543:\t\t\t\tbreak;\n1544:\t\n1545:\t\t\tif (signal_pending(current)) {\n1546:\t\t\t\tret = -EINTR;\n1547:\t\t\t\tbreak;\n1548:\t\t\t}\n1549:\t\t\tstart = indices[folio_batch_count(\u0026fbatch) - 1];\n1550:\t\t} while (true);\n1551:\t\n1552:\t\treturn ret;\n1553:\t}\n1554:\t\n1555:\t/*\n1556:\t * Read all the shared memory data that resides in the swap\n1557:\t * device 'type' back into memory, so the swap device can be\n1558:\t * unused.\n1559:\t */\n"
} |
| 51/3 | 2026/10/01 23:30 | tool | read-file |
0mArgs:{
"File": "mm/swapfile.c",
"FirstLine": 2600,
"LineCount": 40
}Results: {
"Contents": "2600:\t\n2601:\tstatic inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,\n2602:\t\t\t\t\tunsigned long addr, unsigned long end,\n2603:\t\t\t\t\tunsigned int type)\n2604:\t{\n2605:\t\tpmd_t *pmd;\n2606:\t\tunsigned long next;\n2607:\t\tint ret;\n2608:\t\n2609:\t\tpmd = pmd_offset(pud, addr);\n2610:\t\tdo {\n2611:\t\t\tcond_resched();\n2612:\t\t\tif (signal_pending(current))\n2613:\t\t\t\treturn -EINTR;\n2614:\t\t\tnext = pmd_addr_end(addr, end);\n2615:\t\t\tret = unuse_pte_range(vma, pmd, addr, next, type);\n2616:\t\t\tif (ret)\n2617:\t\t\t\treturn ret;\n2618:\t\t} while (pmd++, addr = next, addr != end);\n2619:\t\treturn 0;\n2620:\t}\n2621:\t\n2622:\tstatic inline int unuse_pud_range(struct vm_area_struct *vma, p4d_t *p4d,\n2623:\t\t\t\t\tunsigned long addr, unsigned long end,\n2624:\t\t\t\t\tunsigned int type)\n2625:\t{\n2626:\t\tpud_t *pud;\n2627:\t\tunsigned long next;\n2628:\t\tint ret;\n2629:\t\n2630:\t\tpud = pud_offset(p4d, addr);\n2631:\t\tdo {\n2632:\t\t\tnext = pud_addr_end(addr, end);\n2633:\t\t\tif (pud_none_or_clear_bad(pud))\n2634:\t\t\t\tcontinue;\n2635:\t\t\tret = unuse_pmd_range(vma, pud, addr, next, type);\n2636:\t\t\tif (ret)\n2637:\t\t\t\treturn ret;\n2638:\t\t} while (pud++, addr = next, addr != end);\n2639:\t\treturn 0;\n"
} |
| 52/3 | 2026/10/01 23:30 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 4443 output: 33 thoughts: 196 Thoughts: Okay, let's break this down. **Analyzing the Swapoff Signal Handling Patch** Alright, I see what's happening here. The code modifications are targeting responsiveness to signals, specifically during the `swapoff` process. It appears we're looking at optimizations for how the kernel handles interrupts or termination signals, such as SIGINT or SIGKILL, during memory unswapping. The primary area of interest is within `shmem.c`, where `shmem_unuse_inode()` iterates through swap entries associated with shmem inodes to bring swapped-out memory back into RAM, likely triggered by a `swapoff` operation. The patch introduces a critical early exit condition, checking for pending signals using `signal_pending(current)` within the loop. If a signal is detected, the function immediately returns with an `EINTR` error code, effectively interrupting the potentially lengthy unswapping process. Similarly, in `mm/swapfile.c`, `unuse_pmd_range()` which also iterates through pmds, now also includes a signal check, returning `EINTR` if a signal is pending. This again targets a loop, indicating it too can be a long running process that should exit on signal. The goal seems to be to make `swapoff` more responsive to external signals. Instead of being stuck indefinitely when a process has initiated swapoff, but is subsequently terminated, the signal will break the process and clean up as expected. My next step is to examine the calling functions, particularly within `swapoff` itself or related functions like `unuse_mm`, to understand how this `EINTR` error is handled. I need to see how the system reacts to these interruptions and if the error handling is robust enough to prevent any data corruption or resource leaks during a premature swapoff termination. I'm also curious to see if there are any race conditions to look out for. |
| 53/3 | 2026/10/01 23:30 | tool | grepper |
0mArgs:{
"Expression": "unuse_pmd_range",
"PathPrefix": "mm/swapfile.c"
}Results: {
"Output": "mm/swapfile.c=2532=static int unuse_pte_range(struct vm_area_struct *vma, pmd_t *pmd,\n--\nmm/swapfile.c-2600-\nmm/swapfile.c:2601:static inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,\nmm/swapfile.c-2602-\t\t\t\tunsigned long addr, unsigned long end,\n--\nmm/swapfile.c=2622=static inline int unuse_pud_range(struct vm_area_struct *vma, p4d_t *p4d,\n--\nmm/swapfile.c-2634-\t\t\tcontinue;\nmm/swapfile.c:2635:\t\tret = unuse_pmd_range(vma, pud, addr, next, type);\nmm/swapfile.c-2636-\t\tif (ret)\n"
} |
| 54/3 | 2026/10/01 23:30 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 5315 output: 33 thoughts: 22 Thoughts: Here's my analysis of the provided thought process, tailored for an expert audience: **Analyzing the Call Chain Around `try_to_unuse` in `swapfile.c`** Okay, so the prompt is to dive into the call chain surrounding `try_to_unuse` within `swapfile.c`. This immediately suggests a few avenues of inquiry I'll need to pursue, starting with a review of the function itself. I need to understand *why* we're focusing on this particular function. Presumably, it deals with releasing or deactivating swapped memory pages. The context implies that we're dealing with the interaction between memory management and the swap file itself, specifically focusing on scenarios where pages are considered "unused" and are candidates for being removed from active memory. I'll need to identify the direct callers to `try_to_unuse` first. Are we looking at calls from the core memory management routines, from the page fault handler, or perhaps from the swapper thread itself? The *what* is just as important as the *how*...what are the conditions that trigger the call to `try_to_unuse`? Are we talking about a simple page reclaim, or are we investigating more complex scenarios like an out-of-memory situation? From there, I'll need to trace the call graph further *upwards*. What functions call those callers? This will build a more complete picture of the process. I want to understand the higher-level logic that *leads* to the decision to attempt to unuse a page. Is it due to pressure from the memory manager, or perhaps a proactive optimization? The structure of the `swapfile.c` file itself will also be crucial. How is it organized? What are the key data structures involved (e.g., the swap entry table, page structures, etc.)? Understanding these structures is going to be vital for decoding the function's internal behavior and its relationships within the overall system. I'll need to watch for any potential race conditions or synchronization issues within the call chain, given the critical nature of memory management. Finally, I'll want to consider the potential failure paths of `try_to_unuse`. What are the error codes it returns? How are these errors handled? Are there any potential vulnerabilities or opportunities for optimization within the error handling itself? Essentially, I want to gain a very strong understanding of the system's "success" and "failure" modes with regard to this function. |
| 55/3 | 2026/10/01 23:31 | tool | grepper |
0mArgs:{
"Expression": "unuse_pud_range",
"PathPrefix": "mm/swapfile.c"
}Results: {
"Output": "mm/swapfile.c=2601=static inline int unuse_pmd_range(struct vm_area_struct *vma, pud_t *pud,\n--\nmm/swapfile.c-2621-\nmm/swapfile.c:2622:static inline int unuse_pud_range(struct vm_area_struct *vma, p4d_t *p4d,\nmm/swapfile.c-2623-\t\t\t\tunsigned long addr, unsigned long end,\n--\nmm/swapfile.c=2642=static inline int unuse_p4d_range(struct vm_area_struct *vma, pgd_t *pgd,\n--\nmm/swapfile.c-2654-\t\t\tcontinue;\nmm/swapfile.c:2655:\t\tret = unuse_pud_range(vma, p4d, addr, next, type);\nmm/swapfile.c-2656-\t\tif (ret)\n"
} |
| 56/3 | 2026/10/01 23:31 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 6143 output: 34 thoughts: 18 Thoughts: Here's my take on those thoughts: **Tracing the Callers of `unuse_p4d_range`** Okay, so I need to understand the impact of `unuse_p4d_range`. My first step is obvious: I need to find all the points in the codebase where this function is actually *used*. Knowing where it's called is absolutely crucial to grasping its role and the potential consequences of changes or removals. This is the foundation; I can't even begin to analyze its purpose without identifying its callers first. Time to fire up the tools and get those cross-references! |
| 57/3 | 2026/10/01 23:31 | tool | grepper |
0mArgs:{
"Expression": "unuse_p4d_range",
"PathPrefix": "mm/swapfile.c"
}Results: {
"Output": "mm/swapfile.c=2622=static inline int unuse_pud_range(struct vm_area_struct *vma, p4d_t *p4d,\n--\nmm/swapfile.c-2641-\nmm/swapfile.c:2642:static inline int unuse_p4d_range(struct vm_area_struct *vma, pgd_t *pgd,\nmm/swapfile.c-2643-\t\t\t\tunsigned long addr, unsigned long end,\n--\nmm/swapfile.c=2662=static int unuse_vma(struct vm_area_struct *vma, unsigned int type)\n--\nmm/swapfile.c-2675-\t\t\tcontinue;\nmm/swapfile.c:2676:\t\tret = unuse_p4d_range(vma, pgd, addr, next, type);\nmm/swapfile.c-2677-\t\tif (ret)\n"
} |
| 58/3 | 2026/10/01 23:31 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 6570 output: 35 thoughts: 20 Thoughts: Here's my take on those thoughts: **Investigating Potential `swapfile.c` Issues** Okay, so I need to dig into `swapfile.c` again. I think the best starting point, given the nature of the suspected issues, is to examine the callers of `try_to_unuse`. Understanding how and when this function is invoked will provide insight into the context in which it's operating and hopefully reveal the root cause of the behavior I'm seeing. This is a crucial step in tracing any potential problems back to their origin within that module. Let's see what's going on. |
| 59/3 | 2026/10/01 23:31 | tool | read-file |
0mArgs:{
"File": "mm/swapfile.c",
"FirstLine": 2750,
"LineCount": 80
}Results: {
"Contents": "2750:\t\t\tgoto success;\n2751:\t\n2752:\tretry:\n2753:\t\tretval = shmem_unuse(type);\n2754:\t\tif (retval)\n2755:\t\t\treturn retval;\n2756:\t\n2757:\t\tprev_mm = \u0026init_mm;\n2758:\t\tmmget(prev_mm);\n2759:\t\n2760:\t\tspin_lock(\u0026mmlist_lock);\n2761:\t\tp = \u0026init_mm.mmlist;\n2762:\t\twhile (swap_usage_in_pages(si) \u0026\u0026\n2763:\t\t !signal_pending(current) \u0026\u0026\n2764:\t\t (p = p-\u003enext) != \u0026init_mm.mmlist) {\n2765:\t\n2766:\t\t\tmm = list_entry(p, struct mm_struct, mmlist);\n2767:\t\t\tif (!mmget_not_zero(mm))\n2768:\t\t\t\tcontinue;\n2769:\t\t\tspin_unlock(\u0026mmlist_lock);\n2770:\t\t\tmmput(prev_mm);\n2771:\t\t\tprev_mm = mm;\n2772:\t\t\tretval = unuse_mm(mm, type);\n2773:\t\t\tif (retval) {\n2774:\t\t\t\tmmput(prev_mm);\n2775:\t\t\t\treturn retval;\n2776:\t\t\t}\n2777:\t\n2778:\t\t\t/*\n2779:\t\t\t * Make sure that we aren't completely killing\n2780:\t\t\t * interactive performance.\n2781:\t\t\t */\n2782:\t\t\tcond_resched();\n2783:\t\t\tspin_lock(\u0026mmlist_lock);\n2784:\t\t}\n2785:\t\tspin_unlock(\u0026mmlist_lock);\n2786:\t\n2787:\t\tmmput(prev_mm);\n2788:\t\n2789:\t\ti = 0;\n2790:\t\twhile (swap_usage_in_pages(si) \u0026\u0026\n2791:\t\t !signal_pending(current) \u0026\u0026\n2792:\t\t (i = find_next_to_unuse(si, i)) != 0) {\n2793:\t\n2794:\t\t\tentry = swp_entry(type, i);\n2795:\t\t\tfolio = swap_cache_get_folio(entry);\n2796:\t\t\tif (!folio)\n2797:\t\t\t\tcontinue;\n2798:\t\n2799:\t\t\t/*\n2800:\t\t\t * It is conceivable that a racing task removed this folio from\n2801:\t\t\t * swap cache just before we acquired the page lock. The folio\n2802:\t\t\t * might even be back in swap cache on another swap area. But\n2803:\t\t\t * that is okay, folio_free_swap() only removes stale folios.\n2804:\t\t\t */\n2805:\t\t\tfolio_lock(folio);\n2806:\t\t\tfolio_wait_writeback(folio);\n2807:\t\t\tfolio_free_swap(folio);\n2808:\t\t\tfolio_unlock(folio);\n2809:\t\t\tfolio_put(folio);\n2810:\t\t}\n2811:\t\n2812:\t\t/*\n2813:\t\t * Lets check again to see if there are still swap entries in the map.\n2814:\t\t * If yes, we would need to do retry the unuse logic again.\n2815:\t\t * Under global memory pressure, swap entries can be reinserted back\n2816:\t\t * into process space after the mmlist loop above passes over them.\n2817:\t\t *\n2818:\t\t * Limit the number of retries? No: when mmget_not_zero()\n2819:\t\t * above fails, that mm is likely to be freeing swap from\n2820:\t\t * exit_mmap(), which proceeds at its own independent pace;\n2821:\t\t * and even shmem_writeout() could have been preempted after\n2822:\t\t * folio_alloc_swap(), temporarily hiding that swap. It's easy\n2823:\t\t * and robust (though cpu-intensive) just to keep retrying.\n2824:\t\t */\n2825:\t\tif (swap_usage_in_pages(si)) {\n2826:\t\t\tif (!signal_pending(current))\n2827:\t\t\t\tgoto retry;\n2828:\t\t\treturn -EINTR;\n2829:\t\t}\n"
} |
| 60/3 | 2026/10/01 23:31 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 7909 output: 146 thoughts: 944 Thoughts: **KMSAN Analysis of Signal Handling Patch** Okay, so I've been looking over this patch and its potential impact on kernel memory safety, specifically regarding KMSAN. First, I'm noting the core change: it's adding `signal_pending(current)` checks within `shmem_unuse_inode()` and `unuse_pmd_range()` to allow for faster signal handling during potentially long loops within the swap-off process. This should improve responsiveness, returning `-EINTR` if a signal is received. Now, let's break down the KMSAN implications. My first thought is whether this patch introduces or exposes any uninitialized memory issues. I'm going through the typical questions: 1. **Does it touch userspace data?** Nope. The only interaction here is returning an error code. No new kernel structures are being sent to user space. 2. **Does the patch's control flow depend on uninitialized variables?** No, the `signal_pending(current)` check uses `current->thread_info.flags`, which is always initialized. 3. **Are we dealing with complex data structures that might have uninitialized fields?** No. 4. **Are we altering bounds checks or access patterns in a way that might reveal uninitialized memory?** Not at all. Returning `-EINTR` just causes `sys_swapoff` to abort. The code flow, even with the new signal check, clearly propagates the `-EINTR` return value. In `shmem_unuse_inode`, it returns `-EINTR` directly. In `shmem_unuse`, `unuse_pmd_range`, and ultimately up through `try_to_unuse`, this error code bubbles back up, causing `sys_swapoff` to unwind and clean up. At no point is uninitialized memory ever read, copied to user space, or used in control flow if the patch returns early with `-EINTR`. Double-checking against the KMSAN guidance confirms this. The patch's changes focus on signal handling, and it addresses primarily out-of-bounds access avoidance with `-EINTR`, rather than new memory structures. The standard KASAN, LOCKDEP, and UBSAN sanitizers already enabled by default in kernel builds are sufficient for these concerns. KMSAN isn't needed here. All structures are properly initialized or zeroed. No uninitialized memory is read or leaked. Therefore, `NeedsKMSAN = false`. I'm confident in that assessment. Time to invoke `set-results`. |
| 61/3 | 2026/10/01 23:31 | tool | set-results |
0mArgs:{
"KMSANReasoning": "The patch adds signal responsiveness checks (`signal_pending(current)`) inside `shmem_unuse_inode()` and `unuse_pmd_range()` during swapoff (`try_to_unuse()`), returning `-EINTR` if a signal is pending. It does not introduce, touch, or alter any uninitialized variables, heap/stack allocations, structure padding, or data copied to user space. Potential issues arising from interrupting swapoff early would pertain to resource cleanup or state consistency, which are covered by standard kernel bug detectors and KASAN, not KMSAN.",
"NeedsKMSAN": false
}Results: {
"KMSANReasoning": "The patch adds signal responsiveness checks (`signal_pending(current)`) inside `shmem_unuse_inode()` and `unuse_pmd_range()` during swapoff (`try_to_unuse()`), returning `-EINTR` if a signal is pending. It does not introduce, touch, or alter any uninitialized variables, heap/stack allocations, structure padding, or data copied to user space. Potential issues arising from interrupting swapoff early would pertain to resource cleanup or state consistency, which are covered by standard kernel bug detectors and KASAN, not KMSAN.",
"NeedsKMSAN": false
} |
| Total Calls | Total Tokens | Avg Tokens | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|
| Total Calls | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|