| Seq | Timestamp | Type | Name | Duration |
|---|---|---|---|---|
| 0/0 | 2026/09/30 05:24 | flow | finding-triage |
0mArgs:null Results: {
"Introduced": false,
"Reasoning": "The crash report describes an RCU stall warning (`rcu_preempt detected stalls on CPUs/tasks`) where the `rcu_preempt` grace period kthread was starved for CPU time and tasks were blocked in preemptible RCU read-side critical sections under heavy fuzzing and debug overhead (KASAN quarantine processing, page owner stack unwinding, lockdep).\n\nSpecifically, the call traces show:\n1. Task `syz.5.20549` (pid 7274) was preempted in an RCU read-side critical section within `nl80211_netlink_notify()` during `netlink_release()`.\n2. Task `syz.4.20547` (pid 7269) was preempted in `llc_ui_sendmsg()` performing skb allocation, quarantine reduction, and stack walking (`kasan_quarantine_reduce()`, `save_stack()`).\n3. CPU 1 was executing an RDS connection work item (`rds_connect_worker()`) traversing netfilter/synproxy routines with heavy lockdep overhead (`__lock_acquire()`, `stack_trace_save()`).\n\nThe patch series being tested is titled \"[PATCH net] net/smc: prevent TCP from retaining freed address-family ops\" and only modifies `net/mptcp/subflow.c`, `net/smc/af_smc.c`, and `net/smc/smc_close.c` to prevent use-after-free and recursion issues in SMC socket fallback and MPTCP ULP attachment. None of the modified code or subsystems (SMC, MPTCP) are involved in any of the stack traces. The stall is an unrelated artifact of syzkaller fuzzing load and instrumentation overhead."
} |
| 1/1 | 2026/09/30 05:24 | action | prepare-finding-overview |
0mArgs:null Results: {
"DiffStat": "net/mptcp/subflow.c | 7 ++++---\n net/smc/af_smc.c | 14 +++++++++++---\n net/smc/smc_close.c | 6 ++++++\n 3 files changed, 21 insertions(+), 6 deletions(-)",
"HasCover": false,
"PatchCount": 1,
"PatchList": "The patch series contains 1 patch:\n[1] [PATCH net] net/smc: prevent TCP from retaining freed address-family ops"
} |
| 2/1 | 2026/09/30 05:24 | agent | finding-triage-evaluator |
0mModel:core Args: null Results: {
"Introduced": false,
"Reasoning": "The crash report describes an RCU stall warning (`rcu_preempt detected stalls on CPUs/tasks`) where the `rcu_preempt` grace period kthread was starved for CPU time and tasks were blocked in preemptible RCU read-side critical sections under heavy fuzzing and debug overhead (KASAN quarantine processing, page owner stack unwinding, lockdep).\n\nSpecifically, the call traces show:\n1. Task `syz.5.20549` (pid 7274) was preempted in an RCU read-side critical section within `nl80211_netlink_notify()` during `netlink_release()`.\n2. Task `syz.4.20547` (pid 7269) was preempted in `llc_ui_sendmsg()` performing skb allocation, quarantine reduction, and stack walking (`kasan_quarantine_reduce()`, `save_stack()`).\n3. CPU 1 was executing an RDS connection work item (`rds_connect_worker()`) traversing netfilter/synproxy routines with heavy lockdep overhead (`__lock_acquire()`, `stack_trace_save()`).\n\nThe patch series being tested is titled \"[PATCH net] net/smc: prevent TCP from retaining freed address-family ops\" and only modifies `net/mptcp/subflow.c`, `net/smc/af_smc.c`, and `net/smc/smc_close.c` to prevent use-after-free and recursion issues in SMC socket fallback and MPTCP ULP attachment. None of the modified code or subsystems (SMC, MPTCP) are involved in any of the stack traces. The stall is an unrelated artifact of syzkaller fuzzing load and instrumentation overhead."
}Instruction: You are an expert Linux kernel maintainer and security engineer specializing
in crash triage and root-cause analysis.
Your job is to review a kernel crash report (finding) and determine if it was introduced / caused
by the patch series being tested, or if it is a pre-existing / unrelated bug.
IMPORTANT: The entire patch series has ALREADY been applied and committed as a single squashed commit
at HEAD (or on top of the base commit) in your workspace.
Do NOT rely on your internal knowledge of the kernel. You must actively use your tools to examine
the source code, inspect workspace diffs, and confirm any assumptions.
Available Tools:
- git-show: View the squashed patch series commit or historical commits. Call with Commit="HEAD" (default)
and optional 'File' parameter to restrict the diff to a specific file or directory, or 'Stat=true' for a diffstat.
- series-patches: Browse the original patch series. Call without arguments to list all patch titles,
or PatchNum=<N> to view the full description and diff of a specific patch (or cover letter, if present).
- read-file & codesearch-dir-index: Read exact source code files and directory contents in the workspace.
- grepper: Regex search across files in the workspace (git grep).
- git-blame: Inspect line authorship and find which commit last modified specific lines of code.
Triage Procedure:
1. Analyze the Crash Report:
- Identify the crash type (e.g. NULL dereference, KASAN use-after-free, out-of-bounds read/write,
assertion failure, deadlock).
- Carefully examine the stack trace(s) — both the faulting call stack and, if applicable (e.g., KASAN UAF),
the allocation and free stacks.
- Note the faulting function, file name, line numbers, and the specific variables or data structures involved.
2. Inspect Workspace Changes & Patch Series:
- Check if any files or functions from the stack trace appear in the modified files overview or the patch series.
- Use git-show with Commit="HEAD" and 'File' to inspect the exact diffs for relevant files
in the squashed commit.
- If needed, use series-patches with PatchNum=<N> to inspect the author's commit description
and rationale for individual patches in the series.
- Use read-file to inspect the actual source code at the faulting lines.
3. Determine Causality:
- Set Introduced=true ONLY IF you are absolutely certain:
* There is clear, unambiguous, and conclusive evidence that the crash was directly introduced
or caused by the patch series.
* The crash occurs directly in new or modified code introduced by the patch series, or the patch series
altered data structures, locking, object lifetimes, or preconditions in a way that directly
triggered the failure in existing code.
- Set Introduced=false IF:
* There is any doubt, ambiguity, or lack of conclusive proof that the patch series caused the bug.
* The crash occurs in an unrelated subsystem or unmodified code path whose behavior is independent
of the patch series.
* The crash is a pre-existing kernel issue that was randomly triggered during fuzzing.
4. Formulate Output:
- Set Introduced to true or false.
- In Reasoning, provide a clear, step-by-step technical explanation detailing the crash type,
the key stack frames, whether the affected code/structures were modified by the patch series,
and the causal justification for your verdict.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Target architecture: amd64 The kernel crash report to triage is: rcu: INFO: rcu_preempt detected stalls on CPUs/tasks: rcu: Tasks blocked on level-0 rcu_node (CPUs 0-1): P7269/1:b..l P7274/1:b..l rcu: (detected by 0, t=10502 jiffies, g=396069, q=886348 ncpus=2) task:syz.5.20549 state:R running task stack:25608 pid:7274 tgid:7274 ppid:20485 task_flags:0x40044c flags:0x00080003 Call Trace: <TASK> __schedule+0x17db/0x58f0 preempt_schedule_common+0x7f/0xd0 preempt_schedule_thunk+0x16/0x40 __local_bh_enable_ip+0xe9/0x140 nl80211_netlink_notify+0x49c/0x860 notifier_call_chain+0x1a5/0x3d0 blocking_notifier_call_chain+0x6a/0x90 netlink_release+0x11fb/0x1a80 __sock_release+0xa0/0x1f0 sock_close+0x1c/0x30 __fput+0x418/0xa50 task_work_run+0x1d9/0x270 do_exit+0x73a/0x2360 do_group_exit+0x22d/0x2f0 get_signal+0x121b/0x12c0 arch_do_signal_or_restart+0xbb/0x860 exit_to_user_mode_loop+0x10e/0x770 do_syscall_64+0x328/0x520 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f30fdd9ef49 RSP: 002b:00007fffe60b1d38 EFLAGS: 00000202 ORIG_RAX: 00000000000001b3 RAX: 0000000000003af3 RBX: 00007f30fdd5a4e0 RCX: 00007f30fdd9ef49 RDX: 00007f30fdd5a4e0 RSI: 0000000000000058 RDI: 00007fffe60b1d90 RBP: 00007f30fbfd56c0 R08: 00007f30fbfd56c0 R09: 00007fffe60b1e77 R10: 0000000000000008 R11: 0000000000000202 R12: ffffffffffffffe8 R13: 000000000000006e R14: 00007fffe60b1d90 R15: 00007fffe60b1e78 </TASK> task:syz.4.20547 state:R running task stack:26800 pid:7269 tgid:7266 ppid:20478 task_flags:0x400040 flags:0x00080002 Call Trace: <TASK> __schedule+0x17db/0x58f0 preempt_schedule_irq+0x4b/0x90 irqentry_exit+0x14f/0x910 asm_sysvec_apic_timer_interrupt+0x1a/0x20 RIP: 0010:lock_acquire+0x232/0x350 Code: ff ff ff e8 40 3c 43 0a f7 44 24 10 00 02 00 00 0f 84 38 ff ff ff 65 48 8b 05 62 27 f2 11 48 3b 44 24 50 75 33 fb 48 83 c4 58 <5b> 41 5c 41 5d 41 5e 41 5f 5d e9 7f 40 46 0a cc 48 8d 3d 87 61 da RSP: 0018:ffffc9000fabef00 EFLAGS: 00000296 RAX: 0e1a830c9fc7f400 RBX: 0000000000000000 RCX: 0000000000000046 RDX: 00000000e2212058 RSI: ffffffff8e69f13f RDI: ffffffff8c6dac80 RBP: ffff8881a44f8000 R08: ffffffff8177f1df R09: 0000000000000000 R10: ffffc9000fabf038 R11: ffffffff81b293f0 R12: ffffffff8ed5c920 R13: 0000000000000002 R14: 0000000000000000 R15: 0000000000000246 unwind_next_frame+0xac/0x2550 arch_stack_walk+0x11b/0x150 stack_trace_save+0xa9/0x100 save_stack+0x122/0x230 __reset_page_owner+0x71/0x1f0 __free_frozen_pages+0xc93/0xd90 __slab_free+0x274/0x2c0 qlist_free_all+0x99/0x100 kasan_quarantine_reduce+0x148/0x160 __kasan_slab_alloc+0x22/0x80 kmem_cache_alloc_node_noprof+0x354/0x610 __alloc_skb+0x27a/0x7a0 alloc_skb_with_frags+0xc6/0x760 sock_alloc_send_pskb+0x878/0x990 llc_ui_sendmsg+0x459/0xe30 sock_sendmsg_nosec+0x13a/0x180 ____sys_sendmsg+0x54e/0x850 ___sys_sendmsg+0x2a5/0x360 __sys_sendmmsg+0x273/0x4d0 __x64_sys_sendmmsg+0xa0/0xc0 do_syscall_64+0x166/0x520 entry_SYSCALL_64_after_hwframe+0x77/0x7f RIP: 0033:0x7f0de119e159 RSP: 002b:00007f0de201a028 EFLAGS: 00000246 ORIG_RAX: 0000000000000133 RAX: ffffffffffffffda RBX: 00007f0de1426090 RCX: 00007f0de119e159 RDX: 03fffffffffffeed RSI: 0000200000001380 RDI: 0000000000000005 RBP: 00007f0de123506b R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007f0de1426128 R14: 00007f0de1426090 R15: 00007ffe2cc36478 </TASK> rcu: rcu_preempt kthread starved for 328 jiffies! g396069 f0x2 RCU_GP_WAIT_FQS(5) ->state=R ->cpu=1 rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior. rcu: RCU grace-period kthread stack dump: task:rcu_preempt state:R running task stack:27160 pid:17 tgid:17 ppid:2 task_flags:0x208040 flags:0x00080000 Call Trace: <TASK> __schedule+0x17db/0x58f0 schedule+0x164/0x2b0 schedule_timeout+0x152/0x2c0 rcu_gp_fqs_loop+0x30c/0x11f0 rcu_gp_kthread+0x9e/0x2b0 kthread+0x38b/0x480 ret_from_fork+0x514/0xb70 ret_from_fork_asm+0x1a/0x30 </TASK> rcu: Stack dump where RCU GP kthread last ran: Sending NMI from CPU 0 to CPUs 1: NMI backtrace for cpu 1 CPU: 1 UID: 0 PID: 32329 Comm: kworker/u8:3 Not tainted syzkaller #0 PREEMPT(full) Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014 Workqueue: krds_cp_wq#12/6 rds_connect_worker RIP: 0010:__lock_acquire+0x3cf/0x2de0 Code: 40 c1 e2 13 41 c1 e4 15 41 09 d4 8b 54 24 10 83 e2 01 c1 e2 12 09 f2 c1 e3 14 09 da 48 c1 e5 20 49 09 ec 48 c1 e7 38 49 09 fc <49> 09 cc 49 09 d4 48 8d 2c c5 00 00 00 00 4c 01 ed 4c 89 6c 24 18 RSP: 0018:ffffc90000a17640 EFLAGS: 00000006 RAX: 0000000000000023 RBX: 0000000000000000 RCX: 0000000000000007 RDX: 0000000000022000 RSI: 0000000000022000 RDI: 6900000000000000 RBP: 0000000000000000 R08: ffffffff8177f1df R09: 0000000000000000 R10: ffffc90000a17928 R11: fffff52000142f31 R12: 6900000000000000 R13: ffff8881aba4a9b0 R14: 0000000000000007 R15: ffff8881aba49e00 FS: 0000000000000000(0000) GS:ffff8882a8cca000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fa68ae00218 CR3: 0000000169cee000 CR4: 00000000000006f0 Call Trace: <IRQ> lock_acquire+0x115/0x350 unwind_next_frame+0xac/0x2550 __unwind_start+0x514/0x660 arch_stack_walk+0xe3/0x150 stack_trace_save+0xa9/0x100 kasan_save_track+0x3e/0x80 __kasan_kmalloc+0x93/0xb0 __kmalloc_cache_noprof+0x321/0x600 ref_tracker_alloc+0x15b/0x4b0 dst_init+0xbe/0x470 dst_alloc+0x12a/0x170 ip_route_output_key_hash_rcu+0x14ac/0x2720 ip_route_output_key_hash+0x18d/0x2a0 ip_route_output_flow+0x2a/0x150 ip_route_me_harder+0x762/0xfe0 synproxy_send_tcp+0x332/0x670 synproxy_send_client_synack+0x89b/0xde0 nft_synproxy_eval_v4+0x362/0x4e0 nft_synproxy_do_eval+0x389/0x5d0 nft_do_chain+0x132b/0x1b10 nft_do_chain_ipv4+0x195/0x290 nf_hook_slow+0xc5/0x220 NF_HOOK+0x21f/0x3c0 NF_HOOK+0x336/0x3c0 process_backlog+0xa6b/0x18b0 __napi_poll+0xaa/0x330 net_rx_action+0x61d/0xf50 handle_softirqs+0x226/0x860 do_softirq+0x77/0xd0 </IRQ> <TASK> __local_bh_enable_ip+0x100/0x140 __inet6_bind+0x301/0xf30 kernel_bind+0x13e/0x1c0 rds_tcp_conn_path_connect+0x53b/0x920 rds_connect_worker+0x1d8/0x290 process_scheduled_works+0xc3d/0x1630 worker_thread+0xa47/0xfb0 kthread+0x38b/0x480 ret_from_fork+0x514/0xb70 ret_from_fork_asm+0x1a/0x30 </TASK> Overview of modified files in the workspace: net/mptcp/subflow.c | 7 ++++--- net/smc/af_smc.c | 14 +++++++++++--- net/smc/smc_close.c | 6 ++++++ 3 files changed, 21 insertions(+), 6 deletions(-) The patch series contains 1 patch: [1] [PATCH net] net/smc: prevent TCP from retaining freed address-family ops |
| 3/2 | 2026/09/30 05:24 | llm | finding-triage-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 6694 output: 16 thoughts: 87 Thoughts: Here's my analysis of the situation: **Kernel Crash Report Triage - RCU Stall** Okay, so we've got a kernel crash report highlighting an RCU preempt stall. The log indicates that `rcu_preempt` has detected stalls on CPUs and tasks. The specific tasks blocked are identified as P7269 and P7274, both seemingly on CPU 1. This is the starting point for diagnosis. My initial approach, given the nature of the error, will be to leverage my knowledge of RCU internals and the typical tools and techniques for debugging this kind of issue. First, I’ll need to understand the patch level of the kernel, as RCU issues are often addressed in specific patches or series. I'll need to know which kernel version is running to understand whether this is a known issue. I’ll start by reviewing the related tools and existing kernel patches. I need to understand if there are any known RCU preempt stall regressions in this kernel version, or if there are any tools that can help diagnose this issue, e.g., the `rcu_trace` or `lockdep` features. |
| 4/2 | 2026/09/30 05:24 | tool | git-show |
0mArgs:{
"Commit": "HEAD"
}Results: {
"Output": "commit 6afeea9258f51afa4be556d5df670bd8cd948fd5\nAuthor: syz-cluster \u003ctriage@syzkaller.com\u003e\nDate: Wed Sep 30 05:24:15 2026 +0000\n\n syz-cluster: applied patch under review\n\ndiff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c\nindex f0a6725d2c376..da7ac71344a92 100644\n--- a/net/mptcp/subflow.c\n+++ b/net/mptcp/subflow.c\n@@ -1984,10 +1984,11 @@ static int subflow_ulp_init(struct sock *sk)\n \tstruct tcp_sock *tp = tcp_sk(sk);\n \tint err = 0;\n \n-\t/* disallow attaching ULP to a socket unless it has been\n-\t * created with sock_create_kern()\n+\t/* Only attach to a kernel-created socket that has not been\n+\t * exposed through a file.\n \t */\n-\tif (!sk-\u003esk_kern_sock) {\n+\tif (!sk-\u003esk_kern_sock ||\n+\t (sk-\u003esk_socket \u0026\u0026 READ_ONCE(sk-\u003esk_socket-\u003efile))) {\n \t\terr = -EOPNOTSUPP;\n \t\tgoto out;\n \t}\ndiff --git a/net/smc/af_smc.c b/net/smc/af_smc.c\nindex e9f93b3ab435b..dbbe7d6574e49 100644\n--- a/net/smc/af_smc.c\n+++ b/net/smc/af_smc.c\n@@ -157,7 +157,7 @@ static struct sock *smc_tcp_syn_recv_sock(const struct sock *sk,\n \t\trcu_assign_sk_user_data(child, NULL);\n \n \t\t/* v4-mapped sockets don't inherit parent ops. Don't restore. */\n-\t\tif (inet_csk(child)-\u003eicsk_af_ops == inet_csk(sk)-\u003eicsk_af_ops)\n+\t\tif (inet_csk(child)-\u003eicsk_af_ops == \u0026smc-\u003eaf_ops)\n \t\t\tinet_csk(child)-\u003eicsk_af_ops = smc-\u003eori_af_ops;\n \t}\n \tsock_put(\u0026smc-\u003esk);\n@@ -2671,6 +2671,8 @@ int smc_listen(struct socket *sock, int backlog)\n \tif (!smc-\u003euse_fallback)\n \t\ttcp_sk(smc-\u003eclcsock-\u003esk)-\u003esyn_smc = 1;\n \n+\tsock_set_flag(sk, SOCK_RCU_FREE);\n+\n \t/* save original sk_data_ready function and establish\n \t * smc-specific sk_data_ready function\n \t */\n@@ -2682,18 +2684,25 @@ int smc_listen(struct socket *sock, int backlog)\n \twrite_unlock_bh(\u0026smc-\u003eclcsock-\u003esk-\u003esk_callback_lock);\n \n \t/* save original ops */\n+\tlock_sock(smc-\u003eclcsock-\u003esk);\n \tsmc-\u003eori_af_ops = inet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops;\n \n \tsmc-\u003eaf_ops = *smc-\u003eori_af_ops;\n \tsmc-\u003eaf_ops.syn_recv_sock = smc_tcp_syn_recv_sock;\n \n-\tinet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops = \u0026smc-\u003eaf_ops;\n+\tWRITE_ONCE(inet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops, \u0026smc-\u003eaf_ops);\n+\trelease_sock(smc-\u003eclcsock-\u003esk);\n \n \tif (smc-\u003elimit_smc_hs)\n \t\ttcp_sk(smc-\u003eclcsock-\u003esk)-\u003esmc_hs_congested = smc_hs_congested;\n \n \trc = kernel_listen(smc-\u003eclcsock, backlog);\n \tif (rc) {\n+\t\tlock_sock(smc-\u003eclcsock-\u003esk);\n+\t\tif (inet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops == \u0026smc-\u003eaf_ops)\n+\t\t\tWRITE_ONCE(inet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops,\n+\t\t\t\t smc-\u003eori_af_ops);\n+\t\trelease_sock(smc-\u003eclcsock-\u003esk);\n \t\twrite_lock_bh(\u0026smc-\u003eclcsock-\u003esk-\u003esk_callback_lock);\n \t\tsmc_clcsock_restore_cb(\u0026smc-\u003eclcsock-\u003esk-\u003esk_data_ready,\n \t\t\t\t \u0026smc-\u003eclcsk_data_ready);\n@@ -2701,7 +2710,6 @@ int smc_listen(struct socket *sock, int backlog)\n \t\twrite_unlock_bh(\u0026smc-\u003eclcsock-\u003esk-\u003esk_callback_lock);\n \t\tgoto out;\n \t}\n-\tsock_set_flag(sk, SOCK_RCU_FREE);\n \tsk-\u003esk_max_ack_backlog = backlog;\n \tsk-\u003esk_ack_backlog = 0;\n \tsk-\u003esk_state = SMC_LISTEN;\ndiff --git a/net/smc/smc_close.c b/net/smc/smc_close.c\nindex bb0313ef5f7c1..c59e578f3e521 100644\n--- a/net/smc/smc_close.c\n+++ b/net/smc/smc_close.c\n@@ -24,12 +24,18 @@\n void smc_clcsock_release(struct smc_sock *smc)\n {\n \tstruct socket *tcp;\n+\tstruct sock *sk;\n \n \tif (smc-\u003elisten_smc \u0026\u0026 current_work() != \u0026smc-\u003esmc_listen_work)\n \t\tcancel_work_sync(\u0026smc-\u003esmc_listen_work);\n \tmutex_lock(\u0026smc-\u003eclcsock_release_lock);\n \tif (smc-\u003eclcsock) {\n \t\ttcp = smc-\u003eclcsock;\n+\t\tsk = tcp-\u003esk;\n+\t\tlock_sock(sk);\n+\t\tif (inet_csk(sk)-\u003eicsk_af_ops == \u0026smc-\u003eaf_ops)\n+\t\t\tWRITE_ONCE(inet_csk(sk)-\u003eicsk_af_ops, smc-\u003eori_af_ops);\n+\t\trelease_sock(sk);\n \t\tsmc-\u003eclcsock = NULL;\n \t\tsock_release(tcp);\n \t}\n"
} |
| 5/2 | 2026/09/30 05:24 | llm | finding-triage-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 8800 output: 10 thoughts: 14 Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience: **Analyzing the Patch Series** Right, let's dive in. My initial thought is to get a handle on the structure and scope of this patch series. I need a clear overview. Time to utilize `series-patches`. I'm going to run it and quickly review the output. It's the most efficient way to see the individual commits, their descriptions, and the overall narrative the author is trying to convey. I'm expecting it to provide the essential context – the core issue, the proposed solution's implementation, and any related dependencies or constraints. Hopefully the commit messages are well-written and I can quickly grasp the logic, so I can start dissecting the individual patches. This is where I begin my critical assessment, right from the entry point. |
| 6/2 | 2026/09/30 05:24 | tool | series-patches |
0mError:missing argument "PatchNum" Args: null Results: {
"error": "missing argument \"PatchNum\""
} |
| 7/2 | 2026/09/30 05:24 | llm | finding-triage-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 9019 output: 15 thoughts: 17 Thoughts: Okay, here's the summary, framed as your thought process: **Evaluating the Impact of Patch Versions** Alright, let's get down to brass tacks. I need to understand the impact of these patches. I'm going to quickly test two scenarios: one where `PatchNum` is set to 1 and another where it's set to 0. This direct comparison is the fastest way to get a handle on the changes introduced by this particular patch or the baseline behavior without it. This direct comparison will quickly show the relevant differences. |
| 8/2 | 2026/09/30 05:24 | tool | series-patches |
0mArgs:{
"PatchNum": 1
}Results: {
"Output": "Patch [1] [PATCH net] net/smc: prevent TCP from retaining freed address-family ops:\n\nYue Sun reported a KASAN use-after-free in tcp_sync_mss() after an\nAF_SMC socket entered TCP fallback and listen failed. smc_listen()\ninstalls an address-family operations table embedded in smc_sock, but\nits error path leaves the table installed. TCP can outlive the SMC\nsocket and dereference the freed table. Retrying listen also saves the\nSMC wrapper as the original operations and can recurse indefinitely.\n\nRestore the original operations after a failed listen and before\nreleasing the internal TCP socket. The latter also covers a fallback\nlistener reused as an active TCP socket. Serialize installation and\nrestoration with the TCP socket lock, and restore only if the embedded\ntable is still installed, preserving a concurrent address-family\nconversion.\n\nEnable the existing RCU-delayed SMC socket destruction before publishing\nthe listener callbacks, including on failed listen. Compare a child's\noperations with the embedded table itself so that concurrent restoration\nof the parent's operations cannot leave the child holding that table.\n\nSMC fallback exposes the kernel TCP socket through the socket file.\nReject attaching the MPTCP ULP to such a socket: otherwise userspace\ncan bypass smc_setsockopt() and MPTCP can retain the embedded table in\nits subflow context. MPTCP's own creation path still attaches its ULP\nbefore the new kernel socket is associated with a file.\n\nA standalone userspace reproducer forces listen to fail with\nEADDRINUSE, enters TCP fallback, and closes the SMC owner with data\nqueued behind a zero receive window. A TCP probe then reports a KASAN\nuse-after-free in __tcp_transmit_skb() when reading net_header_len.\nThe same binary completes without a KASAN report after this change.\nThe complete x86_64 SMC and MPTCP code was compiled.\n\nFixes: 8270d9c21041 (\"net/smc: Limit backlog connections\")\nFixes: 2303f994b3e1 (\"mptcp: Associate MPTCP context with TCP socket\")\nReported-by: Yue Sun \u003csamsun1006219@gmail.com\u003e\nCloses: https://lore.kernel.org/netdev/20260713085238.16780-1-samsun1006219@gmail.com/\nCc: stable@vger.kernel.org\nAssisted-by: Codex:gpt-6-astra\nSigned-off-by: Kyle Zeng \u003ckylebot@openai.com\u003e\n---\n net/mptcp/subflow.c | 7 ++++---\n net/smc/af_smc.c | 14 +++++++++++---\n net/smc/smc_close.c | 6 ++++++\n 3 files changed, 21 insertions(+), 6 deletions(-)\n\ndiff --git a/net/mptcp/subflow.c b/net/mptcp/subflow.c\nindex f0a6725d2c37..da7ac71344a9 100644\n--- a/net/mptcp/subflow.c\n+++ b/net/mptcp/subflow.c\n@@ -1984,10 +1984,11 @@ static int subflow_ulp_init(struct sock *sk)\n \tstruct tcp_sock *tp = tcp_sk(sk);\n \tint err = 0;\n \n-\t/* disallow attaching ULP to a socket unless it has been\n-\t * created with sock_create_kern()\n+\t/* Only attach to a kernel-created socket that has not been\n+\t * exposed through a file.\n \t */\n-\tif (!sk-\u003esk_kern_sock) {\n+\tif (!sk-\u003esk_kern_sock ||\n+\t (sk-\u003esk_socket \u0026\u0026 READ_ONCE(sk-\u003esk_socket-\u003efile))) {\n \t\terr = -EOPNOTSUPP;\n \t\tgoto out;\n \t}\ndiff --git a/net/smc/af_smc.c b/net/smc/af_smc.c\nindex e9f93b3ab435..dbbe7d6574e4 100644\n--- a/net/smc/af_smc.c\n+++ b/net/smc/af_smc.c\n@@ -157,7 +157,7 @@ static struct sock *smc_tcp_syn_recv_sock(const struct sock *sk,\n \t\trcu_assign_sk_user_data(child, NULL);\n \n \t\t/* v4-mapped sockets don't inherit parent ops. Don't restore. */\n-\t\tif (inet_csk(child)-\u003eicsk_af_ops == inet_csk(sk)-\u003eicsk_af_ops)\n+\t\tif (inet_csk(child)-\u003eicsk_af_ops == \u0026smc-\u003eaf_ops)\n \t\t\tinet_csk(child)-\u003eicsk_af_ops = smc-\u003eori_af_ops;\n \t}\n \tsock_put(\u0026smc-\u003esk);\n@@ -2671,6 +2671,8 @@ int smc_listen(struct socket *sock, int backlog)\n \tif (!smc-\u003euse_fallback)\n \t\ttcp_sk(smc-\u003eclcsock-\u003esk)-\u003esyn_smc = 1;\n \n+\tsock_set_flag(sk, SOCK_RCU_FREE);\n+\n \t/* save original sk_data_ready function and establish\n \t * smc-specific sk_data_ready function\n \t */\n@@ -2682,18 +2684,25 @@ int smc_listen(struct socket *sock, int backlog)\n \twrite_unlock_bh(\u0026smc-\u003eclcsock-\u003esk-\u003esk_callback_lock);\n \n \t/* save original ops */\n+\tlock_sock(smc-\u003eclcsock-\u003esk);\n \tsmc-\u003eori_af_ops = inet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops;\n \n \tsmc-\u003eaf_ops = *smc-\u003eori_af_ops;\n \tsmc-\u003eaf_ops.syn_recv_sock = smc_tcp_syn_recv_sock;\n \n-\tinet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops = \u0026smc-\u003eaf_ops;\n+\tWRITE_ONCE(inet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops, \u0026smc-\u003eaf_ops);\n+\trelease_sock(smc-\u003eclcsock-\u003esk);\n \n \tif (smc-\u003elimit_smc_hs)\n \t\ttcp_sk(smc-\u003eclcsock-\u003esk)-\u003esmc_hs_congested = smc_hs_congested;\n \n \trc = kernel_listen(smc-\u003eclcsock, backlog);\n \tif (rc) {\n+\t\tlock_sock(smc-\u003eclcsock-\u003esk);\n+\t\tif (inet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops == \u0026smc-\u003eaf_ops)\n+\t\t\tWRITE_ONCE(inet_csk(smc-\u003eclcsock-\u003esk)-\u003eicsk_af_ops,\n+\t\t\t\t smc-\u003eori_af_ops);\n+\t\trelease_sock(smc-\u003eclcsock-\u003esk);\n \t\twrite_lock_bh(\u0026smc-\u003eclcsock-\u003esk-\u003esk_callback_lock);\n \t\tsmc_clcsock_restore_cb(\u0026smc-\u003eclcsock-\u003esk-\u003esk_data_ready,\n \t\t\t\t \u0026smc-\u003eclcsk_data_ready);\n@@ -2701,7 +2710,6 @@ int smc_listen(struct socket *sock, int backlog)\n \t\twrite_unlock_bh(\u0026smc-\u003eclcsock-\u003esk-\u003esk_callback_lock);\n \t\tgoto out;\n \t}\n-\tsock_set_flag(sk, SOCK_RCU_FREE);\n \tsk-\u003esk_max_ack_backlog = backlog;\n \tsk-\u003esk_ack_backlog = 0;\n \tsk-\u003esk_state = SMC_LISTEN;\ndiff --git a/net/smc/smc_close.c b/net/smc/smc_close.c\nindex bb0313ef5f7c..c59e578f3e52 100644\n--- a/net/smc/smc_close.c\n+++ b/net/smc/smc_close.c\n@@ -24,12 +24,18 @@\n void smc_clcsock_release(struct smc_sock *smc)\n {\n \tstruct socket *tcp;\n+\tstruct sock *sk;\n \n \tif (smc-\u003elisten_smc \u0026\u0026 current_work() != \u0026smc-\u003esmc_listen_work)\n \t\tcancel_work_sync(\u0026smc-\u003esmc_listen_work);\n \tmutex_lock(\u0026smc-\u003eclcsock_release_lock);\n \tif (smc-\u003eclcsock) {\n \t\ttcp = smc-\u003eclcsock;\n+\t\tsk = tcp-\u003esk;\n+\t\tlock_sock(sk);\n+\t\tif (inet_csk(sk)-\u003eicsk_af_ops == \u0026smc-\u003eaf_ops)\n+\t\t\tWRITE_ONCE(inet_csk(sk)-\u003eicsk_af_ops, smc-\u003eori_af_ops);\n+\t\trelease_sock(sk);\n \t\tsmc-\u003eclcsock = NULL;\n \t\tsock_release(tcp);\n \t}\n-- \n2.55.0.openai.867.ga7d5542d7eda"
} |
| 9/2 | 2026/09/30 05:24 | llm | finding-triage-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 11541 output: 25 thoughts: 1990 Thoughts: **Analyzing the RCU Stall in the Crash Report** Alright, let's dive into this crash report. The key here is the RCU stall warning. It says `rcu_preempt detected stalls on CPUs/tasks`. This is a clear red flag, and we need to understand which tasks are blocked and why. The report identifies tasks P7269 and P7274 as being the culprits, specifically blocked on CPU 0-1 within a level-0 `rcu_node`. The RCU preemption kthread is also starved. Looking at the call stacks, P7274 (`syz.5.20549`) is in `nl80211_netlink_notify`, threading through the notifier chain, netlink release, and ultimately a socket closure path. P7269 (`syz.4.20547`), on the other hand, is deep inside the networking stack with `llc_ui_sendmsg`, going through the allocation of an skb and various slab allocator calls. This one looks a little more involved, with some KASAN interaction and quicklists. On CPU 1, there's also `krds_cp_wq` (rds_connect_worker) working with synproxy. The flags `P7269/1:b..l P7274/1:b..l` are especially informative, the `b` tells us both tasks are blocked in an RCU read-side critical section. So, the tasks are stalled, but why? The trace indicates they're caught up in tasks related to netlink, socket and networking calls. The key is in the stack traces. There's a clear path through networking and socket operations. P7274 seems to be involved with a netlink notification, likely related to wireless networking, going through socket cleanup. P7269 is in a more obscure part, potentially related to socket allocation and send. Now, let's step back and consider the context. What's the recent patch? The patch modifies: `net/mptcp/subflow.c`, `net/smc/af_smc.c`, `net/smc/smc_close.c`. The patch title `[PATCH net] net/smc: prevent TCP from retaining freed address-family ops` is about preventing TCP from retaining freed address-family ops in SMC (Shared Memory Communications). It addresses issues in `af_smc.c`, `smc_close.c`, and `net/mptcp/subflow.c`. The core idea of this patch is related to Shared Memory Communications (SMC) – specifically how the system handles the cleanup of address family operations after they've been freed. The critical question now is, is there any connection between this SMC-related patch and the RCU stall? Is the patch somehow influencing the networking paths that are now blocked? From what I see now, there doesn't seem to be an obvious direct link between the patch and the specific functions or modules involved in the stall (nl80211, llc, rds). But the stall is in RCU read-side critical sections, with netlink and socket paths. The stall is in the middle of socket operation, so there is potentially a connection between the patch and this socket path which causes the stall in RCU. I need to dig deeper into the code to explore this. We need to check those functions, to see if there is any interaction between the SMC and these. |
| 10/2 | 2026/09/30 05:24 | tool | grepper |
0mArgs:{
"Expression": "nl80211_netlink_notify"
}Results: {
"Output": "net/wireless/nl80211.c=23128=EXPORT_SYMBOL(cfg80211_tdls_oper_request);\nnet/wireless/nl80211.c-23129-\nnet/wireless/nl80211.c:23130:static int nl80211_netlink_notify(struct notifier_block * nb,\nnet/wireless/nl80211.c-23131-\t\t\t\t unsigned long state,\n--\nnet/wireless/nl80211.c=23193=static struct notifier_block nl80211_netlink_notifier = {\nnet/wireless/nl80211.c:23194:\t.notifier_call = nl80211_netlink_notify,\nnet/wireless/nl80211.c-23195-};\n"
} |
| 11/2 | 2026/09/30 05:25 | llm | finding-triage-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 14547 output: 42 thoughts: 18 Thoughts: Okay, let's dive into this `nl80211_netlink_notify` function. I need to understand its role. It's screaming "Netlink Notification," so it's clearly related to sending out information, likely about wireless networking events, over the Netlink interface. What types of events? Is this a central point for all wireless-related state changes, or is it more granular? I need to figure out the scope of what this function handles. I'll want to trace its call sites to see what triggers these notifications. What kind of events are being reported and to whom? Is it used for both internal kernel consumption of wireless state AND reporting to userspace tools like `iwconfig`, `wpa_supplicant`, or `NetworkManager`? Where are the data structures being populated before this function is called? Are they already well-formed and ready for serialization, or is there significant data preparation occurring within `nl80211_netlink_notify` itself? The efficiency is a concern too. Is this function optimized for frequent notifications, or is there a chance of blocking here due to resource contention, especially if we're dealing with a large number of wireless devices or a high volume of events? Understanding any locking mechanisms used internally will be key. I will also want to study how this function interacts with the various Netlink message types defined within `nl80211`. I'll be looking to see if it supports any message attributes that are specific to certain device types or configurations. I'm assuming that it is linked to various `genl_cmd` definitions somehow. Let's see if this is handling a lot of data copy operations or if it uses the Netlink features in an efficient manner. |
| 12/2 | 2026/09/30 05:25 | tool | read-file |
0mArgs:{
"File": "net/wireless/nl80211.c",
"FirstLine": 23130,
"LineCount": 60
}Results: {
"Contents": "23130:\tstatic int nl80211_netlink_notify(struct notifier_block * nb,\n23131:\t\t\t\t\t unsigned long state,\n23132:\t\t\t\t\t void *_notify)\n23133:\t{\n23134:\t\tstruct netlink_notify *notify = _notify;\n23135:\t\tstruct cfg80211_registered_device *rdev;\n23136:\t\tstruct wireless_dev *wdev;\n23137:\t\tstruct cfg80211_beacon_registration *reg, *tmp;\n23138:\t\n23139:\t\tif (state != NETLINK_URELEASE || notify-\u003eprotocol != NETLINK_GENERIC)\n23140:\t\t\treturn NOTIFY_DONE;\n23141:\t\n23142:\t\trcu_read_lock();\n23143:\t\n23144:\t\tlist_for_each_entry_rcu(rdev, \u0026cfg80211_rdev_list, list) {\n23145:\t\t\tstruct cfg80211_sched_scan_request *sched_scan_req;\n23146:\t\n23147:\t\t\tlist_for_each_entry_rcu(sched_scan_req,\n23148:\t\t\t\t\t\t\u0026rdev-\u003esched_scan_req_list,\n23149:\t\t\t\t\t\tlist) {\n23150:\t\t\t\tif (sched_scan_req-\u003eowner_nlportid == notify-\u003eportid) {\n23151:\t\t\t\t\tsched_scan_req-\u003enl_owner_dead = true;\n23152:\t\t\t\t\twiphy_work_queue(\u0026rdev-\u003ewiphy,\n23153:\t\t\t\t\t\t\t \u0026rdev-\u003esched_scan_stop_wk);\n23154:\t\t\t\t}\n23155:\t\t\t}\n23156:\t\n23157:\t\t\tlist_for_each_entry_rcu(wdev, \u0026rdev-\u003ewiphy.wdev_list, list) {\n23158:\t\t\t\tcfg80211_mlme_unregister_socket(wdev, notify-\u003eportid);\n23159:\t\n23160:\t\t\t\tif (wdev-\u003eowner_nlportid == notify-\u003eportid) {\n23161:\t\t\t\t\twdev-\u003enl_owner_dead = true;\n23162:\t\t\t\t\tschedule_work(\u0026rdev-\u003edestroy_work);\n23163:\t\t\t\t} else if (wdev-\u003econn_owner_nlportid == notify-\u003eportid) {\n23164:\t\t\t\t\twiphy_work_queue(wdev-\u003ewiphy,\n23165:\t\t\t\t\t\t\t \u0026wdev-\u003edisconnect_wk);\n23166:\t\t\t\t}\n23167:\t\n23168:\t\t\t\tcfg80211_release_pmsr(wdev, notify-\u003eportid);\n23169:\t\t\t}\n23170:\t\n23171:\t\t\tspin_lock_bh(\u0026rdev-\u003ebeacon_registrations_lock);\n23172:\t\t\tlist_for_each_entry_safe(reg, tmp, \u0026rdev-\u003ebeacon_registrations,\n23173:\t\t\t\t\t\t list) {\n23174:\t\t\t\tif (reg-\u003enlportid == notify-\u003eportid) {\n23175:\t\t\t\t\tlist_del(\u0026reg-\u003elist);\n23176:\t\t\t\t\tkfree(reg);\n23177:\t\t\t\t\tbreak;\n23178:\t\t\t\t}\n23179:\t\t\t}\n23180:\t\t\tspin_unlock_bh(\u0026rdev-\u003ebeacon_registrations_lock);\n23181:\t\t}\n23182:\t\n23183:\t\trcu_read_unlock();\n23184:\t\n23185:\t\t/*\n23186:\t\t * It is possible that the user space process that is controlling the\n23187:\t\t * indoor setting disappeared, so notify the regulatory core.\n23188:\t\t */\n23189:\t\tregulatory_netlink_notify(notify-\u003eportid);\n"
} |
| 13/2 | 2026/09/30 05:25 | llm | finding-triage-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 16016 output: 408 thoughts: 1591 Thoughts: **RCU Stall Analysis: Not the Patch's Fault**
Alright, let's break this down. We've got an RCU stall warning—the `rcu_preempt` kthread is starved, and tasks are getting blocked in RCU read-side critical sections. Specifically, we see `nl80211_netlink_notify` being preempted (P7274) within an RCU read-lock, and `llc_ui_sendmsg` (P7269) also getting preempted during an skb allocation, likely weighed down by KASAN quarantine and those page owner stack traces. Meanwhile, CPU 1 is swamped with `rds_connect_worker` which is locked up by lockdep and stack unwinding.
The critical thing is, under `rcu_read_lock`, there's a call to `spin_unlock_bh`, which can preempt depending on `PREEMPT(full)` configuration. This directly contributes to the stall.
Now, let's see if our patch is connected. The patch series touches `net/mptcp/subflow.c`, and parts of `net/smc/af_smc.c` and `net/smc/smc_close.c`. The code in `mptcp/subflow.c` is:
```c
- if (!sk->sk_kern_sock) {
+ if (!sk->sk_kern_sock ||
+ (sk->sk_socket && READ_ONCE(sk->sk_socket->file))) {
```
And the patch in `af_smc.c` is related to `smc_tcp_syn_recv_sock` and `smc_listen`, with some `sock_set_flag` changes and restoring `icsk_af_ops`. Then `smc_close.c` handles `smc_clcsock_release`.
None of the tasks in the crash report are involved with SMC or MPTCP. Task 1 is associated with socket release in `nl80211_netlink_notify`, Task 2 with `llc_ui_sendmsg`, and CPU 1 has `rds_connect_worker`. These are entirely distinct subsystems. We're looking at a classic syzkaller RCU stall/starvation scenario triggered by high load and the overhead of KASAN/lockdep. We can confirm through `git-show` that the patched files are not directly related to LLC, RDS, nl80211, or RCU grace periods.
Therefore, this crash is unrelated to the patch series. It's a scheduling issue exacerbated by the fuzzing environment, KASAN, and lockdep.
So, let's summarize: the crash is an RCU stall, the stack traces point to preemption within an RCU read section, and none of the code modified by the patch series is involved. It is an unrelated scheduling issue under load from syzkaller.
|
| 14/2 | 2026/09/30 05:25 | tool | set-results |
0mArgs:{
"Introduced": false,
"Reasoning": "The crash report describes an RCU stall warning (`rcu_preempt detected stalls on CPUs/tasks`) where the `rcu_preempt` grace period kthread was starved for CPU time and tasks were blocked in preemptible RCU read-side critical sections under heavy fuzzing and debug overhead (KASAN quarantine processing, page owner stack unwinding, lockdep).\n\nSpecifically, the call traces show:\n1. Task `syz.5.20549` (pid 7274) was preempted in an RCU read-side critical section within `nl80211_netlink_notify()` during `netlink_release()`.\n2. Task `syz.4.20547` (pid 7269) was preempted in `llc_ui_sendmsg()` performing skb allocation, quarantine reduction, and stack walking (`kasan_quarantine_reduce()`, `save_stack()`).\n3. CPU 1 was executing an RDS connection work item (`rds_connect_worker()`) traversing netfilter/synproxy routines with heavy lockdep overhead (`__lock_acquire()`, `stack_trace_save()`).\n\nThe patch series being tested is titled \"[PATCH net] net/smc: prevent TCP from retaining freed address-family ops\" and only modifies `net/mptcp/subflow.c`, `net/smc/af_smc.c`, and `net/smc/smc_close.c` to prevent use-after-free and recursion issues in SMC socket fallback and MPTCP ULP attachment. None of the modified code or subsystems (SMC, MPTCP) are involved in any of the stack traces. The stall is an unrelated artifact of syzkaller fuzzing load and instrumentation overhead."
}Results: {
"Introduced": false,
"Reasoning": "The crash report describes an RCU stall warning (`rcu_preempt detected stalls on CPUs/tasks`) where the `rcu_preempt` grace period kthread was starved for CPU time and tasks were blocked in preemptible RCU read-side critical sections under heavy fuzzing and debug overhead (KASAN quarantine processing, page owner stack unwinding, lockdep).\n\nSpecifically, the call traces show:\n1. Task `syz.5.20549` (pid 7274) was preempted in an RCU read-side critical section within `nl80211_netlink_notify()` during `netlink_release()`.\n2. Task `syz.4.20547` (pid 7269) was preempted in `llc_ui_sendmsg()` performing skb allocation, quarantine reduction, and stack walking (`kasan_quarantine_reduce()`, `save_stack()`).\n3. CPU 1 was executing an RDS connection work item (`rds_connect_worker()`) traversing netfilter/synproxy routines with heavy lockdep overhead (`__lock_acquire()`, `stack_trace_save()`).\n\nThe patch series being tested is titled \"[PATCH net] net/smc: prevent TCP from retaining freed address-family ops\" and only modifies `net/mptcp/subflow.c`, `net/smc/af_smc.c`, and `net/smc/smc_close.c` to prevent use-after-free and recursion issues in SMC socket fallback and MPTCP ULP attachment. None of the modified code or subsystems (SMC, MPTCP) are involved in any of the stack traces. The stall is an unrelated artifact of syzkaller fuzzing load and instrumentation overhead."
} |
| Total Calls | Total Tokens | Avg Tokens | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|
| Total Calls | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|