| Seq | Timestamp | Type | Name | Duration |
|---|---|---|---|---|
| 0/0 | 2026/09/16 16:00 | flow | patch-triage |
7mArgs:null Results: {
"EnableConfigs": [
"CIFS",
"INET",
"CIFS_XATTR"
],
"FocusSymbols": [
"cifs_reparse_point_to_fattr",
"wsl_to_fattr",
"posix_reparse_to_fattr"
],
"KMSANReasoning": "The patch addresses unaligned accesses when parsing WSL extended attributes by replacing direct pointer dereferences with get_unaligned_le32() and get_unaligned_le64(), and prevents partial updates to 'fattr' on failure paths by staging values in local variables (uid, gid, mode, rdev).\n\nAll newly introduced local variables (uid, gid, mode, rdev) are explicitly initialized at declaration. No uninitialized memory is read, used in branching, or copied to user space. Any potential memory access bugs in EA buffer parsing (such as out-of-bounds reads) are covered by KASAN/UBSAN rather than KMSAN. Thus, dedicated KMSAN fuzzing is not required.",
"NeedsKMSAN": false,
"Reasoning": "The patch modifies fs/smb/client/reparse.c and reparse.h by restructuring wsl_to_fattr() to avoid partially mutating struct cifs_fattr when attribute validation fails mid-execution (such as mismatched reparse tag vs WSL mode or missing device major/minor numbers). It also replaces potentially unaligned pointer dereferences with get_unaligned_le32() and get_unaligned_le64(). These changes affect executable code paths handling WSL and POSIX reparse point resolution in the CIFS client, which is reachable in virtualized environments.",
"WorthFuzzing": true
} |
| 1/1 | 2026/09/16 16:00 | action | read-patch-diff |
0mArgs:null Results: {
"PatchDiff": "commit b1eb87f4aa24354e7918d60b0780f5e34101b041\nAuthor: syz-cluster \u003ctriage@syzkaller.com\u003e\nDate: Wed Sep 16 16:00:06 2026 +0000\n\n syz-cluster: applied patch under review\n\ndiff --git a/fs/smb/client/reparse.c b/fs/smb/client/reparse.c\nindex 9e31fce7e0a52..3a27773186ae4 100644\n--- a/fs/smb/client/reparse.c\n+++ b/fs/smb/client/reparse.c\n@@ -1149,29 +1149,30 @@ static bool wsl_to_fattr(struct cifs_open_info_data *data,\n \t\t\t u32 tag, struct cifs_fattr *fattr)\n {\n \tunsigned int sbflags = cifs_sb_flags(cifs_sb);\n+\tkuid_t uid = cifs_sb-\u003ectx-\u003elinux_uid;\n+\tkgid_t gid = cifs_sb-\u003ectx-\u003elinux_gid;\n \tstruct smb2_file_full_ea_info *ea;\n \tbool have_xattr_dev = false;\n+\tdev_t rdev = 0;\n+\tumode_t mode;\n \tu32 next = 0;\n \n-\tfattr-\u003ecf_uid = cifs_sb-\u003ectx-\u003elinux_uid;\n-\tfattr-\u003ecf_gid = cifs_sb-\u003ectx-\u003elinux_gid;\n-\n-\tfattr-\u003ecf_mode \u0026= ~S_IFMT;\n+\tmode = fattr-\u003ecf_mode \u0026 ~S_IFMT;\n \tswitch (tag) {\n \tcase IO_REPARSE_TAG_LX_SYMLINK:\n-\t\tfattr-\u003ecf_mode |= S_IFLNK;\n+\t\tmode |= S_IFLNK;\n \t\tbreak;\n \tcase IO_REPARSE_TAG_LX_FIFO:\n-\t\tfattr-\u003ecf_mode |= S_IFIFO;\n+\t\tmode |= S_IFIFO;\n \t\tbreak;\n \tcase IO_REPARSE_TAG_AF_UNIX:\n-\t\tfattr-\u003ecf_mode |= S_IFSOCK;\n+\t\tmode |= S_IFSOCK;\n \t\tbreak;\n \tcase IO_REPARSE_TAG_LX_CHR:\n-\t\tfattr-\u003ecf_mode |= S_IFCHR;\n+\t\tmode |= S_IFCHR;\n \t\tbreak;\n \tcase IO_REPARSE_TAG_LX_BLK:\n-\t\tfattr-\u003ecf_mode |= S_IFBLK;\n+\t\tmode |= S_IFBLK;\n \t\tbreak;\n \t}\n \n@@ -1195,26 +1196,29 @@ static bool wsl_to_fattr(struct cifs_open_info_data *data,\n \n \t\tif (!strncmp(name, SMB2_WSL_XATTR_UID, nlen)) {\n \t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_UID))\n-\t\t\t\tfattr-\u003ecf_uid = wsl_make_kuid(cifs_sb, v);\n+\t\t\t\tuid = wsl_make_kuid(cifs_sb, v);\n \t\t} else if (!strncmp(name, SMB2_WSL_XATTR_GID, nlen)) {\n \t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_GID))\n-\t\t\t\tfattr-\u003ecf_gid = wsl_make_kgid(cifs_sb, v);\n+\t\t\t\tgid = wsl_make_kgid(cifs_sb, v);\n \t\t} else if (!strncmp(name, SMB2_WSL_XATTR_MODE, nlen)) {\n \t\t\t/* File type in reparse point tag and in xattr mode must match. */\n-\t\t\tif (S_DT(fattr-\u003ecf_mode) != S_DT(le32_to_cpu(*(__le32 *)v)))\n+\t\t\tif (S_DT(mode) != S_DT(get_unaligned_le32(v)))\n \t\t\t\treturn false;\n-\t\t\tfattr-\u003ecf_mode = (umode_t)le32_to_cpu(*(__le32 *)v);\n+\t\t\tmode = get_unaligned_le32(v);\n \t\t} else if (!strncmp(name, SMB2_WSL_XATTR_DEV, nlen)) {\n-\t\t\tfattr-\u003ecf_rdev = reparse_mkdev(v);\n+\t\t\trdev = reparse_mkdev(v);\n \t\t\thave_xattr_dev = true;\n \t\t}\n \t} while (next);\n out:\n-\n \t/* Major and minor numbers for char and block devices are mandatory. */\n \tif (!have_xattr_dev \u0026\u0026 (tag == IO_REPARSE_TAG_LX_CHR || tag == IO_REPARSE_TAG_LX_BLK))\n \t\treturn false;\n \n+\tfattr-\u003ecf_uid = uid;\n+\tfattr-\u003ecf_gid = gid;\n+\tfattr-\u003ecf_mode = mode;\n+\tfattr-\u003ecf_rdev = rdev;\n \treturn true;\n }\n \ndiff --git a/fs/smb/client/reparse.h b/fs/smb/client/reparse.h\nindex 49efd85b1e949..05b2cecb44954 100644\n--- a/fs/smb/client/reparse.h\n+++ b/fs/smb/client/reparse.h\n@@ -9,6 +9,7 @@\n #include \u003clinux/fs.h\u003e\n #include \u003clinux/stat.h\u003e\n #include \u003clinux/uidgid.h\u003e\n+#include \u003clinux/unaligned.h\u003e\n #include \"fs_context.h\"\n #include \"cifsglob.h\"\n #include \"../common/smbfsctl.h\"\n@@ -23,7 +24,7 @@\n \n static inline dev_t reparse_mkdev(void *ptr)\n {\n-\tu64 v = le64_to_cpu(*(__le64 *)ptr);\n+\tu64 v = get_unaligned_le64(ptr);\n \n \treturn MKDEV(v \u0026 0xffffffff, v \u003e\u003e 32);\n }\n@@ -31,7 +32,7 @@ static inline dev_t reparse_mkdev(void *ptr)\n static inline kuid_t wsl_make_kuid(struct cifs_sb_info *cifs_sb,\n \t\t\t\t void *ptr)\n {\n-\tu32 uid = le32_to_cpu(*(__le32 *)ptr);\n+\tu32 uid = get_unaligned_le32(ptr);\n \n \tif (cifs_sb_flags(cifs_sb) \u0026 CIFS_MOUNT_OVERR_UID)\n \t\treturn cifs_sb-\u003ectx-\u003elinux_uid;\n@@ -41,7 +42,7 @@ static inline kuid_t wsl_make_kuid(struct cifs_sb_info *cifs_sb,\n static inline kgid_t wsl_make_kgid(struct cifs_sb_info *cifs_sb,\n \t\t\t\t void *ptr)\n {\n-\tu32 gid = le32_to_cpu(*(__le32 *)ptr);\n+\tu32 gid = get_unaligned_le32(ptr);\n \n \tif (cifs_sb_flags(cifs_sb) \u0026 CIFS_MOUNT_OVERR_GID)\n \t\treturn cifs_sb-\u003ectx-\u003elinux_gid;\n"
} |
| 2/1 | 2026/09/16 16:00 | agent | patch-evaluator |
5mModel:core Args: null Results: {
"EnableConfigs": [
"CIFS",
"INET",
"CIFS_XATTR"
],
"FocusSymbols": [
"cifs_reparse_point_to_fattr",
"wsl_to_fattr",
"posix_reparse_to_fattr"
],
"Reasoning": "The patch modifies fs/smb/client/reparse.c and reparse.h by restructuring wsl_to_fattr() to avoid partially mutating struct cifs_fattr when attribute validation fails mid-execution (such as mismatched reparse tag vs WSL mode or missing device major/minor numbers). It also replaces potentially unaligned pointer dereferences with get_unaligned_le32() and get_unaligned_le64(). These changes affect executable code paths handling WSL and POSIX reparse point resolution in the CIFS client, which is reachable in virtualized environments.",
"WorthFuzzing": true
}Instruction: You are an expert Linux kernel maintainer and security engineer.
Your job is to review a provided patch series and evaluate whether it warrants fuzzing with syzkaller.
IMPORTANT: The changes have ALREADY been applied and committed as the HEAD commit in
your workspace. Do NOT rely on internal assumptions. You must actively use your code access
tools to inspect the actual source code, callers, and surrounding context.
================================================================================
1. CORE TRIAGE PHILOSOPHY
================================================================================
The goal of patch fuzzing is to discover crashes, regressions, exposed latent bugs,
and newly triggered assertions introduced by the patch series.
- REACHABILITY IS THE PRIMARY GATE:
Fuzzing can only discover bugs in code that can actually execute in standard virtualized
environments (GCE or QEMU, utilizing software-emulated devices like USB gadgets, netdev, tun/tap).
If the modified code is structurally unreachable (see Section 2), it MUST NOT be fuzzed,
regardless of whether it adds assertions or complex logic.
- DO NOT BLINDLY TRUST "NO FUNCTIONAL CHANGE" (NFCI) OR "REFACTORING" CLAIMS:
Patch authors routinely label changes as "cleanups", "refactorings", or state
"No functional change intended". Do NOT take these claims at face value.
Code refactorings that rearrange logic, introduce helper functions, or alter state management
in core subsystems frequently introduce subtle semantic shifts or uncover latent kernel bugs.
If reachable executable code is modified or refactored, it MUST be fuzzed.
- NEW OR MODIFIED ASSERTIONS IN REACHABLE CODE MUST BE FUZZED:
When a patch introduces or modifies runtime checks or assertions (e.g., WARN_ON*, VM_WARN_ON*,
BUG_ON*, lockdep_assert*) in reachable code paths, it enforces new or stricter invariants.
Even if the author believes the invariant always holds, fuzzing is essential to verify whether
an unusual sequence of operations can violate it.
================================================================================
2. WHEN TO RETURN WorthFuzzing=false (NEGATIVE CRITERIA)
================================================================================
Return WorthFuzzing=false ONLY IF all modified code falls strictly into one or more of these categories:
- Non-kernel and non-executable changes:
* Modifications to Documentation/, comments, or spelling fixes.
* User-space directories, self-tests, samples, or scripts (e.g., tools/, samples/, scripts/, usr/)
that do not affect the compiled kernel image (vmlinux) or kernel modules.
* Purely decorative logging (e.g., message strings in pr_err, printk, dev_info) or tracepoints
that do not alter control flow or data structures.
* Build system or Kconfig changes that do not alter compiled C logic.
- Structurally unreachable hardware:
* Vendor-specific PCIe switches, SmartNICs, or GPU drivers (e.g., mlxsw, pds_core, qed,
ionic, amdgpu) requiring physical ASIC/PCIe cards not emulated in standard QEMU.
- Unreachable execution paths:
* Driver teardown callbacks (.remove, .shutdown, pci_unregister_driver) executed only during
physical PCI hot-unplug or manual sysfs driver unbinding.
* Code paths exclusive to architectures other than the target architecture.
================================================================================
3. WHEN TO RETURN WorthFuzzing=true (POSITIVE CRITERIA)
================================================================================
Return WorthFuzzing=true whenever the patch touches reachable executable code, including:
- Core Subsystems:
* Any logic modifications in memory management (mm/), synchronization/locking (kernel/locking/),
BPF, scheduler, core networking, VFS, or syscall handling.
- Refactorings and Code Cleanups:
* Any restructuring of reachable data structures, helper abstractions, or algorithm flows.
- Runtime Assertions and Defensive Checks:
* Any introduction or alteration of assertions (WARN_ON*, VM_WARN_ON*, BUG_ON*, etc.) in reachable paths.
- Reachable Drivers and Protocols:
* Drivers accessible via virtual buses (virtio, USB gadget, loopback, netlink, binder, sockets, etc.).
================================================================================
4. EXTRACTING FocusSymbols (PREVENTING DILUTION)
================================================================================
When WorthFuzzing=true, you must extract specific kernel functions into FocusSymbols to guide the fuzzer:
- AVOID UBIQUITOUS LIFECYCLE HOT-PATHS:
Do NOT list generic, ubiquitous functions called by almost every program in the corpus
(including, but not limited to: general memory allocators and deallocators, page fault
and trap handlers, or core synchronization primitives; this is not an exhaustive list).
Listing ubiquitous functions causes the fuzzer to classify thousands of unrelated tests as "focused",
which severely dilutes fuzzing effort away from the actual changes.
- TARGET SPECIFIC FEATURE LOGIC AND ENTRYPOINTS:
List functions that specifically implement the logic being added or altered, or direct API entrypoints
for the subsystem feature under review.
- HANDLING STATIC INLINE FUNCTIONS IN HEADERS (.h):
Compiler-inlined static functions (such as static inlines in mm/*.h or include/linux/*.h) lack
distinct symbol addresses in vmlinux and cannot be targeted directly by symbol coverage filters.
If the changes are primarily in static inline helpers, identify non-static, feature-specific caller
functions in .c files that exercise them (avoiding ubiquitous lifecycle wrappers).
================================================================================
5. IDENTIFYING EnableConfigs
================================================================================
Identify any specific CONFIG_ options required to properly compile and reach the modified code:
- Inspect Kconfig files and #ifdef guards; do not make assumptions.
- Check "depends on" lines in Kconfig to include any non-standard parent subsystem configs needed.
- Strip any 'CONFIG_' prefix (e.g., return "NET_IPV4" instead of "CONFIG_NET_IPV4").
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Target architecture: amd64
For your convenience, here is the diff of the changes:
commit b1eb87f4aa24354e7918d60b0780f5e34101b041
Author: syz-cluster <triage@syzkaller.com>
Date: Wed Sep 16 16:00:06 2026 +0000
syz-cluster: applied patch under review
diff --git a/fs/smb/client/reparse.c b/fs/smb/client/reparse.c
index 9e31fce7e0a52..3a27773186ae4 100644
--- a/fs/smb/client/reparse.c
+++ b/fs/smb/client/reparse.c
@@ -1149,29 +1149,30 @@ static bool wsl_to_fattr(struct cifs_open_info_data *data,
u32 tag, struct cifs_fattr *fattr)
{
unsigned int sbflags = cifs_sb_flags(cifs_sb);
+ kuid_t uid = cifs_sb->ctx->linux_uid;
+ kgid_t gid = cifs_sb->ctx->linux_gid;
struct smb2_file_full_ea_info *ea;
bool have_xattr_dev = false;
+ dev_t rdev = 0;
+ umode_t mode;
u32 next = 0;
- fattr->cf_uid = cifs_sb->ctx->linux_uid;
- fattr->cf_gid = cifs_sb->ctx->linux_gid;
-
- fattr->cf_mode &= ~S_IFMT;
+ mode = fattr->cf_mode & ~S_IFMT;
switch (tag) {
case IO_REPARSE_TAG_LX_SYMLINK:
- fattr->cf_mode |= S_IFLNK;
+ mode |= S_IFLNK;
break;
case IO_REPARSE_TAG_LX_FIFO:
- fattr->cf_mode |= S_IFIFO;
+ mode |= S_IFIFO;
break;
case IO_REPARSE_TAG_AF_UNIX:
- fattr->cf_mode |= S_IFSOCK;
+ mode |= S_IFSOCK;
break;
case IO_REPARSE_TAG_LX_CHR:
- fattr->cf_mode |= S_IFCHR;
+ mode |= S_IFCHR;
break;
case IO_REPARSE_TAG_LX_BLK:
- fattr->cf_mode |= S_IFBLK;
+ mode |= S_IFBLK;
break;
}
@@ -1195,26 +1196,29 @@ static bool wsl_to_fattr(struct cifs_open_info_data *data,
if (!strncmp(name, SMB2_WSL_XATTR_UID, nlen)) {
if (!(sbflags & CIFS_MOUNT_OVERR_UID))
- fattr->cf_uid = wsl_make_kuid(cifs_sb, v);
+ uid = wsl_make_kuid(cifs_sb, v);
} else if (!strncmp(name, SMB2_WSL_XATTR_GID, nlen)) {
if (!(sbflags & CIFS_MOUNT_OVERR_GID))
- fattr->cf_gid = wsl_make_kgid(cifs_sb, v);
+ gid = wsl_make_kgid(cifs_sb, v);
} else if (!strncmp(name, SMB2_WSL_XATTR_MODE, nlen)) {
/* File type in reparse point tag and in xattr mode must match. */
- if (S_DT(fattr->cf_mode) != S_DT(le32_to_cpu(*(__le32 *)v)))
+ if (S_DT(mode) != S_DT(get_unaligned_le32(v)))
return false;
- fattr->cf_mode = (umode_t)le32_to_cpu(*(__le32 *)v);
+ mode = get_unaligned_le32(v);
} else if (!strncmp(name, SMB2_WSL_XATTR_DEV, nlen)) {
- fattr->cf_rdev = reparse_mkdev(v);
+ rdev = reparse_mkdev(v);
have_xattr_dev = true;
}
} while (next);
out:
-
/* Major and minor numbers for char and block devices are mandatory. */
if (!have_xattr_dev && (tag == IO_REPARSE_TAG_LX_CHR || tag == IO_REPARSE_TAG_LX_BLK))
return false;
+ fattr->cf_uid = uid;
+ fattr->cf_gid = gid;
+ fattr->cf_mode = mode;
+ fattr->cf_rdev = rdev;
return true;
}
diff --git a/fs/smb/client/reparse.h b/fs/smb/client/reparse.h
index 49efd85b1e949..05b2cecb44954 100644
--- a/fs/smb/client/reparse.h
+++ b/fs/smb/client/reparse.h
@@ -9,6 +9,7 @@
#include <linux/fs.h>
#include <linux/stat.h>
#include <linux/uidgid.h>
+#include <linux/unaligned.h>
#include "fs_context.h"
#include "cifsglob.h"
#include "../common/smbfsctl.h"
@@ -23,7 +24,7 @@
static inline dev_t reparse_mkdev(void *ptr)
{
- u64 v = le64_to_cpu(*(__le64 *)ptr);
+ u64 v = get_unaligned_le64(ptr);
return MKDEV(v & 0xffffffff, v >> 32);
}
@@ -31,7 +32,7 @@ static inline dev_t reparse_mkdev(void *ptr)
static inline kuid_t wsl_make_kuid(struct cifs_sb_info *cifs_sb,
void *ptr)
{
- u32 uid = le32_to_cpu(*(__le32 *)ptr);
+ u32 uid = get_unaligned_le32(ptr);
if (cifs_sb_flags(cifs_sb) & CIFS_MOUNT_OVERR_UID)
return cifs_sb->ctx->linux_uid;
@@ -41,7 +42,7 @@ static inline kuid_t wsl_make_kuid(struct cifs_sb_info *cifs_sb,
static inline kgid_t wsl_make_kgid(struct cifs_sb_info *cifs_sb,
void *ptr)
{
- u32 gid = le32_to_cpu(*(__le32 *)ptr);
+ u32 gid = get_unaligned_le32(ptr);
if (cifs_sb_flags(cifs_sb) & CIFS_MOUNT_OVERR_GID)
return cifs_sb->ctx->linux_gid;
|
| 3/2 | 2026/09/16 16:00 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 4462 output: 40 thoughts: 72 Thoughts: **Analyzing a Patch: Fuzzing Potential** Okay, so this patch is touching `fs/smb/client/reparse.c` and `fs/smb/client/reparse.h`. Right, that's the starting point. My initial thought is to assess its impact – is this even a relevant area for fuzzing? Let's figure out if the changes are reachable and if they introduce anything interesting from a security perspective. First things first: I'll jump into the `git log` to get a sense of the context. See who touched this code and what the motivations were. I might also use `read-file` or even `grepper` if I need to dig deeper into the surrounding code to understand the flow and dependencies. My goal is to quickly pinpoint the specific functionalities altered and form an informed judgment about its fuzzing worthiness. |
| 4/2 | 2026/09/16 16:00 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/reparse.c",
"FirstLine": 1140,
"LineCount": 90
}Results: {
"Contents": "1140:\t{\n1141:\t\tstruct smb2_ioctl_rsp *io = rsp_iov-\u003eiov_base;\n1142:\t\t*plen = le32_to_cpu(io-\u003eOutputCount);\n1143:\t\treturn (struct reparse_data_buffer *)((u8 *)io +\n1144:\t\t\t\t\t\t le32_to_cpu(io-\u003eOutputOffset));\n1145:\t}\n1146:\t\n1147:\tstatic bool wsl_to_fattr(struct cifs_open_info_data *data,\n1148:\t\t\t\t struct cifs_sb_info *cifs_sb,\n1149:\t\t\t\t u32 tag, struct cifs_fattr *fattr)\n1150:\t{\n1151:\t\tunsigned int sbflags = cifs_sb_flags(cifs_sb);\n1152:\t\tkuid_t uid = cifs_sb-\u003ectx-\u003elinux_uid;\n1153:\t\tkgid_t gid = cifs_sb-\u003ectx-\u003elinux_gid;\n1154:\t\tstruct smb2_file_full_ea_info *ea;\n1155:\t\tbool have_xattr_dev = false;\n1156:\t\tdev_t rdev = 0;\n1157:\t\tumode_t mode;\n1158:\t\tu32 next = 0;\n1159:\t\n1160:\t\tmode = fattr-\u003ecf_mode \u0026 ~S_IFMT;\n1161:\t\tswitch (tag) {\n1162:\t\tcase IO_REPARSE_TAG_LX_SYMLINK:\n1163:\t\t\tmode |= S_IFLNK;\n1164:\t\t\tbreak;\n1165:\t\tcase IO_REPARSE_TAG_LX_FIFO:\n1166:\t\t\tmode |= S_IFIFO;\n1167:\t\t\tbreak;\n1168:\t\tcase IO_REPARSE_TAG_AF_UNIX:\n1169:\t\t\tmode |= S_IFSOCK;\n1170:\t\t\tbreak;\n1171:\t\tcase IO_REPARSE_TAG_LX_CHR:\n1172:\t\t\tmode |= S_IFCHR;\n1173:\t\t\tbreak;\n1174:\t\tcase IO_REPARSE_TAG_LX_BLK:\n1175:\t\t\tmode |= S_IFBLK;\n1176:\t\t\tbreak;\n1177:\t\t}\n1178:\t\n1179:\t\tif (!data-\u003ewsl.eas_len)\n1180:\t\t\tgoto out;\n1181:\t\n1182:\t\tea = (struct smb2_file_full_ea_info *)data-\u003ewsl.eas;\n1183:\t\tdo {\n1184:\t\t\tconst char *name;\n1185:\t\t\tvoid *v;\n1186:\t\t\tu8 nlen;\n1187:\t\n1188:\t\t\tea = (void *)((u8 *)ea + next);\n1189:\t\t\tnext = le32_to_cpu(ea-\u003enext_entry_offset);\n1190:\t\t\tif (!le16_to_cpu(ea-\u003eea_value_length))\n1191:\t\t\t\tcontinue;\n1192:\t\n1193:\t\t\tname = ea-\u003eea_data;\n1194:\t\t\tnlen = ea-\u003eea_name_length;\n1195:\t\t\tv = (void *)((u8 *)ea-\u003eea_data + ea-\u003eea_name_length + 1);\n1196:\t\n1197:\t\t\tif (!strncmp(name, SMB2_WSL_XATTR_UID, nlen)) {\n1198:\t\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_UID))\n1199:\t\t\t\t\tuid = wsl_make_kuid(cifs_sb, v);\n1200:\t\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_GID, nlen)) {\n1201:\t\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_GID))\n1202:\t\t\t\t\tgid = wsl_make_kgid(cifs_sb, v);\n1203:\t\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_MODE, nlen)) {\n1204:\t\t\t\t/* File type in reparse point tag and in xattr mode must match. */\n1205:\t\t\t\tif (S_DT(mode) != S_DT(get_unaligned_le32(v)))\n1206:\t\t\t\t\treturn false;\n1207:\t\t\t\tmode = get_unaligned_le32(v);\n1208:\t\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_DEV, nlen)) {\n1209:\t\t\t\trdev = reparse_mkdev(v);\n1210:\t\t\t\thave_xattr_dev = true;\n1211:\t\t\t}\n1212:\t\t} while (next);\n1213:\tout:\n1214:\t\t/* Major and minor numbers for char and block devices are mandatory. */\n1215:\t\tif (!have_xattr_dev \u0026\u0026 (tag == IO_REPARSE_TAG_LX_CHR || tag == IO_REPARSE_TAG_LX_BLK))\n1216:\t\t\treturn false;\n1217:\t\n1218:\t\tfattr-\u003ecf_uid = uid;\n1219:\t\tfattr-\u003ecf_gid = gid;\n1220:\t\tfattr-\u003ecf_mode = mode;\n1221:\t\tfattr-\u003ecf_rdev = rdev;\n1222:\t\treturn true;\n1223:\t}\n1224:\t\n1225:\tstatic bool posix_reparse_to_fattr(struct cifs_sb_info *cifs_sb,\n1226:\t\t\t\t\t struct cifs_fattr *fattr,\n1227:\t\t\t\t\t struct cifs_open_info_data *data)\n1228:\t{\n1229:\t\tstruct reparse_nfs_data_buffer *buf = (struct reparse_nfs_data_buffer *)data-\u003ereparse.buf;\n"
} |
| 5/2 | 2026/09/16 16:00 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 6320 output: 21 thoughts: 17 Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience: **Analyzing `wsl_to_fattr` Call Sites** Okay, so I need to understand the usage of `wsl_to_fattr`. Time to track down all the calls. I'm thinking I'll need to use some tooling, probably `grep` or `ag` to do this quickly. I need to make sure I don't miss anything, so I'll be thorough with the search parameters, maybe include a case-insensitive search and look for any variations in naming conventions that might be used. It's crucial to identify every location where this function is invoked. That will inform a deeper understanding of the system's behavior. Once I have the call sites, I can start to infer the purpose of `wsl_to_fattr`. |
| 6/2 | 2026/09/16 16:00 | tool | grepper |
0mArgs:{
"Expression": "wsl_to_fattr"
}Results: {
"Output": "fs/smb/client/reparse.c=1138=struct reparse_data_buffer *smb2_get_reparse_point_buffer(const struct kvec *rsp_iov,\n--\nfs/smb/client/reparse.c-1146-\nfs/smb/client/reparse.c:1147:static bool wsl_to_fattr(struct cifs_open_info_data *data,\nfs/smb/client/reparse.c-1148-\t\t\t struct cifs_sb_info *cifs_sb,\n--\nfs/smb/client/reparse.c=1274=bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb,\n--\nfs/smb/client/reparse.c-1286-\tcase IO_REPARSE_TAG_LX_BLK:\nfs/smb/client/reparse.c:1287:\t\tok = wsl_to_fattr(data, cifs_sb, tag, fattr);\nfs/smb/client/reparse.c-1288-\t\tif (!ok)\n--\nfs/smb/client/smb1ops.c=532=static int cifs_query_path_info(const unsigned int xid,\n--\nfs/smb/client/smb1ops.c-686-\t\t\t * of EA $LXMOD failed. It is needed only for\nfs/smb/client/smb1ops.c:687:\t\t\t * non-symlink WSL reparse points and wsl_to_fattr()\nfs/smb/client/smb1ops.c-688-\t\t\t * handle the case when EA is missing.\n--\nfs/smb/client/smb1ops.c-732-\t\t\t * of EA $LXDEV failed. It is needed only for\nfs/smb/client/smb1ops.c:733:\t\t\t * WSL CHR and BLK reparse points and wsl_to_fattr()\nfs/smb/client/smb1ops.c-734-\t\t\t * handle the case when EA is missing.\n"
} |
| 7/2 | 2026/09/16 16:00 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 7078 output: 26 thoughts: 22 Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience: **Tracing the `cifs_reparse_point_to_fattr` Callers** Alright, time to dive in. I need to understand the execution context of `cifs_reparse_point_to_fattr`. To do that, I'm going to quickly identify all the places in the code where this function is actually called. It's the most direct way to grasp its purpose and potential impact, especially in a distributed file system like CIFS. Knowing the caller context is key to understanding the intended semantics of this function. I'll be looking for the relevant function calls to better understand its role within the larger CIFS architecture. |
| 8/2 | 2026/09/16 16:00 | tool | grepper |
0mArgs:{
"Expression": "cifs_reparse_point_to_fattr"
}Results: {
"Output": "fs/smb/client/inode.c=847=static void smb311_posix_info_to_fattr(struct cifs_fattr *fattr,\n--\nfs/smb/client/inode.c-886-\tif (cifs_open_data_reparse(data) \u0026\u0026\nfs/smb/client/inode.c:887:\t cifs_reparse_point_to_fattr(cifs_sb, fattr, data))\nfs/smb/client/inode.c-888-\t\tgoto out_reparse;\n--\nfs/smb/client/inode.c=910=static void cifs_open_info_to_fattr(struct cifs_fattr *fattr,\n--\nfs/smb/client/inode.c-946-\tif (cifs_open_data_reparse(data) \u0026\u0026\nfs/smb/client/inode.c:947:\t cifs_reparse_point_to_fattr(cifs_sb, fattr, data))\nfs/smb/client/inode.c-948-\t\tgoto out_reparse;\n--\nfs/smb/client/readdir.c=175=cifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb)\n--\nfs/smb/client/readdir.c-193-\tif ((fattr-\u003ecf_cifsattrs \u0026 ATTR_REPARSE_POINT) \u0026\u0026\nfs/smb/client/readdir.c:194:\t cifs_reparse_point_to_fattr(cifs_sb, fattr, \u0026data))\nfs/smb/client/readdir.c-195-\t\tgoto out_reparse;\n--\nfs/smb/client/reparse.c=1225=static bool posix_reparse_to_fattr(struct cifs_sb_info *cifs_sb,\n--\nfs/smb/client/reparse.c-1273-\nfs/smb/client/reparse.c:1274:bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb,\nfs/smb/client/reparse.c-1275-\t\t\t\t struct cifs_fattr *fattr,\n--\nfs/smb/client/reparse.h=110=static inline bool cifs_open_data_reparse(struct cifs_open_info_data *data)\n--\nfs/smb/client/reparse.h-133-\nfs/smb/client/reparse.h:134:bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb,\nfs/smb/client/reparse.h-135-\t\t\t\t struct cifs_fattr *fattr,\n"
} |
| 9/2 | 2026/09/16 16:00 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 8004 output: 53 thoughts: 503 Thoughts: **CIFS/SMB Client Fuzzing Feasibility** Okay, let's break this down. My initial thought is about the `fs/smb/client` and how that's the CIFS/SMB client filesystem. My immediate question is how CIFS is actually fuzzed. Can standard virtualized environments or syzkaller be used? Wait, can syzkaller fuzz it directly? The core question is whether syzkaller can handle network filesystems like CIFS/SMB. Can I leverage loopback mounts, a userspace server, or even the SMB client mount within syzkaller's setup? I need to clarify if syzkaller even *has* SMB descriptions or knows how to mount CIFS. Alright, before diving too deep, I need to check the syzkaller documentation or the kernel config. Does CIFS even *exist* as a reachable entity within the fuzzing environment? Now, hold on. Let's make sure I understand the "WorthFuzzing=false" criteria from the instructions. It explicitly states *when* to return false, and it's a negative criteria, meaning all code has to fall into a specific category to be skipped. Reading those criteria carefully, CIFS *doesn't* fit *any* of those exclusions. It's in the kernel, it's executable, it's not some structurally unreachable hardware (like a vendor-specific ASIC), and it's not a driver teardown path or restricted to some obscure architecture. CIFS *is* a network filesystem within the kernel (`fs/smb/client`). I'm pretty sure that syzkaller *can* handle CIFS. Mount commands using `cifs` or `smb3`, communication with a local server over loopback, or direct interaction via syzlang should be possible. Now, before I proceed further, I need to check the patch itself. I should use `git show HEAD` to see the commit message and get a clearer picture of what's being fixed or changed. This context is crucial to determine if this change affects the fuzzability in any way. |
| 10/2 | 2026/09/16 16:00 | tool | grepper |
0mError:no matches Args: {
"Expression": "commit b1eb87f4aa24354e7918d60b0780f5e34101b041"
}Results: {
"error": "no matches"
} |
| 11/2 | 2026/09/16 16:00 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 9020 output: 35 thoughts: 16 Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience and written in the first person: **Investigating Kconfig Options for the SMB Client** Okay, let's dive into the `Kconfig` files and see what knobs and dials are available for configuring the SMB client within the kernel's filesystem subsystem. I'm specifically interested in understanding the breadth of options we have for the `fs/smb/client` module. This likely covers everything from protocol versions supported (SMB1, SMB2, SMB3), security features like encryption and signing, transport options (TCP, UDP), and potentially even cache behavior or connection management parameters. I need to get a handle on the available feature set, as it’s essential for optimizing this for performance and security. I'll need to correlate the dependencies and associated symbols and understand which options influence the inclusion or exclusion of specific SMB client functionalities. Ultimately, I need to see what’s configurable at compile time and what's controllable at runtime, this is crucial for the implementation's flexibility and deployability across various environments. I'm anticipating some granular controls in there, but I'm eager to see the overall design and how it's presented to the user. |
| 12/2 | 2026/09/16 16:00 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/Kconfig",
"FirstLine": 1,
"LineCount": 50
}Results: {
"Contents": " 1:\t# SPDX-License-Identifier: GPL-2.0-only\n 2:\tconfig CIFS\n 3:\t\ttristate \"SMB3 and CIFS support (advanced network filesystem)\"\n 4:\t\tdepends on INET\n 5:\t\tselect NLS\n 6:\t\tselect NLS_UCS2_UTILS\n 7:\t\tselect CRYPTO\n 8:\t\tselect CRYPTO_AEAD2\n 9:\t\tselect CRYPTO_CCM\n 10:\t\tselect CRYPTO_GCM\n 11:\t\tselect CRYPTO_AES\n 12:\t\tselect CRYPTO_LIB_AES_CBC_MACS\n 13:\t\tselect CRYPTO_LIB_ARC4\n 14:\t\tselect CRYPTO_LIB_MD5\n 15:\t\tselect CRYPTO_LIB_SHA256\n 16:\t\tselect CRYPTO_LIB_SHA512\n 17:\t\tselect KEYS\n 18:\t\tselect DNS_RESOLVER\n 19:\t\tselect ASN1\n 20:\t\tselect OID_REGISTRY\n 21:\t\tselect NETFS_SUPPORT\n 22:\t\thelp\n 23:\t\t This is the client VFS module for the SMB3 family of network file\n 24:\t\t protocols (including the most recent, most secure dialect SMB3.1.1).\n 25:\t\t This module also includes support for earlier dialects such as\n 26:\t\t SMB2.1, SMB2 and even the old Common Internet File System (CIFS)\n 27:\t\t protocol. CIFS was the successor to the original network filesystem\n 28:\t\t protocol, Server Message Block (SMB ie SMB1), the native file sharing\n 29:\t\t mechanism for most early PC operating systems.\n 30:\t\n 31:\t\t The SMB3.1.1 protocol is supported by most modern operating systems\n 32:\t\t and NAS appliances (e.g. Samba, Windows 11, Windows Server 2022,\n 33:\t\t MacOS) and even in the cloud (e.g. Microsoft Azure) and also by the\n 34:\t\t Linux kernel server, ksmbd. Support for the older CIFS protocol was\n 35:\t\t included in Windows NT4, 2000 and XP (and later). Use of dialects\n 36:\t\t older than SMB2.1 is often discouraged on public networks.\n 37:\t\t This module also provides limited support for OS/2 and Windows ME\n 38:\t\t and similar very old servers.\n 39:\t\n 40:\t\t This module provides an advanced network file system client for\n 41:\t\t mounting to SMB3 (and CIFS) compliant servers. It includes support\n 42:\t\t for DFS (hierarchical name space), secure per-user session\n 43:\t\t establishment via Kerberos or NTLMv2, RDMA (smbdirect), advanced\n 44:\t\t security features, per-share encryption, packet-signing, snapshots,\n 45:\t\t directory leases, safe distributed caching (leases), multichannel,\n 46:\t\t Unicode and other internationalization improvements.\n 47:\t\n 48:\t\t In general, the default dialects, SMB3 and later, enable better\n 49:\t\t performance, security and features, than would be possible with CIFS.\n 50:\t\n"
} |
| 13/2 | 2026/09/16 16:00 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 10140 output: 35 thoughts: 27 Thoughts: Here's my take on the thought process, summarized as you requested: **Digging into the SMB Client Kconfig** Okay, so I need to understand something related to reparse points, WSL, or extended attributes in the SMB client code. Let's start by navigating the `fs/smb/client/Kconfig` file. That's the likely spot to find any relevant configuration options, dependencies, or maybe even comments that shed light on how these features are handled within the SMB implementation. I'm hoping to get a clearer picture of how these things interact and how they are configured. It's time to dig in and see what the Kconfig file reveals. |
| 14/2 | 2026/09/16 16:00 | tool | grepper |
0mArgs:{
"Expression": "WSL|REPARSE|XATTR",
"PathPrefix": "fs/smb/client/"
}Results: {
"Output": "\nFull output is too long, showing 500 out of 1081 lines.\nUse more precise expression if possible.\n\nfs/smb/client/Kconfig=83=config CIFS_UPCALL\n--\nfs/smb/client/Kconfig-91-\nfs/smb/client/Kconfig:92:config CIFS_XATTR\nfs/smb/client/Kconfig-93-\tbool \"CIFS extended attributes\"\n--\nfs/smb/client/Kconfig=107=config CIFS_POSIX\nfs/smb/client/Kconfig-108-\tbool \"CIFS POSIX Extensions\"\nfs/smb/client/Kconfig:109:\tdepends on CIFS \u0026\u0026 CIFS_ALLOW_INSECURE_LEGACY \u0026\u0026 CIFS_XATTR\nfs/smb/client/Kconfig-110-\thelp\n--\nfs/smb/client/Makefile=19=$(obj)/cifs_spnego_negtokeninit.asn1.o: $(obj)/cifs_spnego_negtokeninit.asn1.c $(obj)/cifs_spnego_negtokeninit.asn1.h\nfs/smb/client/Makefile-20-\nfs/smb/client/Makefile:21:cifs-$(CONFIG_CIFS_XATTR) += xattr.o\nfs/smb/client/Makefile-22-\n--\nfs/smb/client/cifs_debug.c=438=static int cifs_debug_data_proc_show(struct seq_file *m, void *v)\n--\nfs/smb/client/cifs_debug.c-482-#endif\nfs/smb/client/cifs_debug.c:483:#ifdef CONFIG_CIFS_XATTR\nfs/smb/client/cifs_debug.c:484:\tseq_printf(m, \",XATTR\");\nfs/smb/client/cifs_debug.c-485-#endif\n--\nfs/smb/client/cifs_fs_sb.h-18-#define CIFS_MOUNT_DIRECT_IO 8 /* do not write nor read through page cache */\nfs/smb/client/cifs_fs_sb.h:19:#define CIFS_MOUNT_NO_XATTR 0x10 /* if set - disable xattr support */\nfs/smb/client/cifs_fs_sb.h-20-#define CIFS_MOUNT_MAP_SPECIAL_CHR 0x20 /* remap illegal chars in filenames */\n--\nfs/smb/client/cifsfs.c=624=cifs_show_options(struct seq_file *s, struct dentry *root)\n--\nfs/smb/client/cifsfs.c-732-\t\tseq_puts(s, \",forcemand\");\nfs/smb/client/cifsfs.c:733:\tif (sbflags \u0026 CIFS_MOUNT_NO_XATTR)\nfs/smb/client/cifsfs.c-734-\t\tseq_puts(s, \",nouser_xattr\");\n--\nfs/smb/client/cifsfs.h=132=int cifs_symlink(struct mnt_idmap *idmap, struct inode *inode,\n--\nfs/smb/client/cifsfs.h-134-\nfs/smb/client/cifsfs.h:135:#ifdef CONFIG_CIFS_XATTR\nfs/smb/client/cifsfs.h-136-extern const struct xattr_handler * const cifs_xattr_handlers[];\n--\nfs/smb/client/cifsglob.h-106-\nfs/smb/client/cifsglob.h:107:#ifndef XATTR_DOS_ATTRIB\nfs/smb/client/cifsglob.h:108:#define XATTR_DOS_ATTRIB \"user.DOSATTRIB\"\nfs/smb/client/cifsglob.h-109-#endif\n--\nfs/smb/client/cifsglob.h=164=enum cifs_reparse_type {\nfs/smb/client/cifsglob.h:165:\tCIFS_REPARSE_TYPE_NONE,\nfs/smb/client/cifsglob.h:166:\tCIFS_REPARSE_TYPE_NFS,\nfs/smb/client/cifsglob.h:167:\tCIFS_REPARSE_TYPE_WSL,\nfs/smb/client/cifsglob.h:168:\tCIFS_REPARSE_TYPE_DEFAULT = CIFS_REPARSE_TYPE_NFS,\nfs/smb/client/cifsglob.h-169-};\n--\nfs/smb/client/cifsglob.h=171=static inline const char *cifs_reparse_type_str(enum cifs_reparse_type type)\n--\nfs/smb/client/cifsglob.h-173-\tswitch (type) {\nfs/smb/client/cifsglob.h:174:\tcase CIFS_REPARSE_TYPE_NONE:\nfs/smb/client/cifsglob.h-175-\t\treturn \"none\";\nfs/smb/client/cifsglob.h:176:\tcase CIFS_REPARSE_TYPE_NFS:\nfs/smb/client/cifsglob.h-177-\t\treturn \"nfs\";\nfs/smb/client/cifsglob.h:178:\tcase CIFS_REPARSE_TYPE_WSL:\nfs/smb/client/cifsglob.h-179-\t\treturn \"wsl\";\n--\nfs/smb/client/cifsglob.h=185=enum cifs_symlink_type {\n--\nfs/smb/client/cifsglob.h-192-\tCIFS_SYMLINK_TYPE_NFS,\nfs/smb/client/cifsglob.h:193:\tCIFS_SYMLINK_TYPE_WSL,\nfs/smb/client/cifsglob.h-194-};\n--\nfs/smb/client/cifsglob.h=196=static inline const char *cifs_symlink_type_str(enum cifs_symlink_type type)\n--\nfs/smb/client/cifsglob.h-210-\t\treturn \"nfs\";\nfs/smb/client/cifsglob.h:211:\tcase CIFS_SYMLINK_TYPE_WSL:\nfs/smb/client/cifsglob.h-212-\t\treturn \"wsl\";\n--\nfs/smb/client/cifsglob.h=249=struct cifs_open_info_data {\n--\nfs/smb/client/cifsglob.h-263-\tstruct {\nfs/smb/client/cifsglob.h:264:\t\t__u8\t\teas[SMB2_WSL_MAX_QUERY_EA_RESP_SIZE];\nfs/smb/client/cifsglob.h-265-\t\tunsigned int\teas_len;\n--\nfs/smb/client/cifsglob.h=311=struct smb_version_operations {\n--\nfs/smb/client/cifsglob.h-648-\t\t\t CIFS_MOUNT_SERVER_INUM | CIFS_MOUNT_DIRECT_IO | \\\nfs/smb/client/cifsglob.h:649:\t\t\t CIFS_MOUNT_NO_XATTR | CIFS_MOUNT_MAP_SPECIAL_CHR | \\\nfs/smb/client/cifsglob.h-650-\t\t\t CIFS_MOUNT_MAP_SFM_CHR | \\\n--\nfs/smb/client/cifsglob.h=2308=static inline void mid_execute_callback(struct TCP_Server_Info *server,\n--\nfs/smb/client/cifsglob.h-2321-\nfs/smb/client/cifsglob.h:2322:#define CIFS_REPARSE_SUPPORT(tcon) \\\nfs/smb/client/cifsglob.h-2323-\t((tcon)-\u003eposix_extensions || \\\nfs/smb/client/cifsglob.h-2324-\t (le32_to_cpu((tcon)-\u003efsAttrInfo.Attributes) \u0026 \\\nfs/smb/client/cifsglob.h:2325:\t FILE_SUPPORTS_REPARSE_POINTS))\nfs/smb/client/cifsglob.h-2326-\n--\nfs/smb/client/cifssmb.c=2982=int cifs_query_reparse_point(const unsigned int xid,\n--\nfs/smb/client/cifssmb.c-3005-\nfs/smb/client/cifssmb.c:3006:\tif (!CIFS_REPARSE_SUPPORT(tcon))\nfs/smb/client/cifssmb.c-3007-\t\treturn -EOPNOTSUPP;\n--\nfs/smb/client/cifssmb.c-3013-\t\t.create_options = cifs_create_options(cifs_sb,\nfs/smb/client/cifssmb.c:3014:\t\t\t\t\t\t OPEN_REPARSE_POINT),\nfs/smb/client/cifssmb.c-3015-\t\t.disposition = FILE_OPEN,\n--\nfs/smb/client/cifssmb.c-3042-\tio_req-\u003eParameterCount = io_req-\u003eTotalParameterCount;\nfs/smb/client/cifssmb.c:3043:\tio_req-\u003eFunctionCode = cpu_to_le32(FSCTL_GET_REPARSE_POINT);\nfs/smb/client/cifssmb.c-3044-\tio_req-\u003eIsFsctl = 1;\n--\nfs/smb/client/cifssmb.c-3072-\t * DataCount is output length transferred over network.\nfs/smb/client/cifssmb.c:3073:\t * Check that we have full FSCTL_GET_REPARSE_POINT buffer.\nfs/smb/client/cifssmb.c-3074-\t */\n--\nfs/smb/client/cifssmb.c=3113=struct inode *cifs_create_reparse_inode(struct cifs_open_info_data *data,\n--\nfs/smb/client/cifssmb.c-3140-\t */\nfs/smb/client/cifssmb.c:3141:\tif (!CIFS_REPARSE_SUPPORT(tcon))\nfs/smb/client/cifssmb.c-3142-\t\treturn ERR_PTR(-EOPNOTSUPP);\nfs/smb/client/cifssmb.c-3143-\nfs/smb/client/cifssmb.c:3144:#ifndef CONFIG_CIFS_XATTR\nfs/smb/client/cifssmb.c-3145-\tif (xattr_iov)\n--\nfs/smb/client/cifssmb.c-3151-\t\t\t FILE_CREATE,\nfs/smb/client/cifssmb.c:3152:\t\t\t (directory ? CREATE_NOT_FILE : CREATE_NOT_DIR) | OPEN_REPARSE_POINT,\nfs/smb/client/cifssmb.c-3153-\t\t\t ACL_NO_MODE);\n--\nfs/smb/client/cifssmb.c-3159-\nfs/smb/client/cifssmb.c:3160:#ifdef CONFIG_CIFS_XATTR\nfs/smb/client/cifssmb.c-3161-\tif (xattr_iov) {\n--\nfs/smb/client/cifssmb.c-3193-\tio_req-\u003eMaxParameterCount = cpu_to_le32(0);\nfs/smb/client/cifssmb.c:3194:\t/* FSCTL_SET_REPARSE_POINT response contains empty output data. */\nfs/smb/client/cifssmb.c-3195-\tio_req-\u003eMaxDataCount = cpu_to_le32(0);\n--\nfs/smb/client/cifssmb.c-3204-\tio_req-\u003eSubCommand = cpu_to_le16(NT_TRANSACT_IOCTL);\nfs/smb/client/cifssmb.c:3205:\tio_req-\u003eFunctionCode = cpu_to_le32(FSCTL_SET_REPARSE_POINT);\nfs/smb/client/cifssmb.c-3206-\tio_req-\u003eFid = fid.netfid;\n--\nfs/smb/client/cifssmb.c-3225-\t/*\nfs/smb/client/cifssmb.c:3226:\t * If CREATE was successful but FSCTL_SET_REPARSE_POINT failed then\nfs/smb/client/cifssmb.c-3227-\t * remove the intermediate object created by CREATE. Otherwise\n--\nfs/smb/client/cifssmb.c=6064=CIFSSMBUnixSetPathInfo(const unsigned int xid, struct cifs_tcon *tcon,\n--\nfs/smb/client/cifssmb.c-6138-\nfs/smb/client/cifssmb.c:6139:#ifdef CONFIG_CIFS_XATTR\nfs/smb/client/cifssmb.c-6140-/*\n--\nfs/smb/client/fs_context.c=346=static int parse_reparse_flavor(struct fs_context *fc, char *value,\n--\nfs/smb/client/fs_context.c-352-\tcase Opt_reparse_default:\nfs/smb/client/fs_context.c:353:\t\tctx-\u003ereparse_type = CIFS_REPARSE_TYPE_DEFAULT;\nfs/smb/client/fs_context.c-354-\t\tbreak;\nfs/smb/client/fs_context.c-355-\tcase Opt_reparse_none:\nfs/smb/client/fs_context.c:356:\t\tctx-\u003ereparse_type = CIFS_REPARSE_TYPE_NONE;\nfs/smb/client/fs_context.c-357-\t\tbreak;\nfs/smb/client/fs_context.c-358-\tcase Opt_reparse_nfs:\nfs/smb/client/fs_context.c:359:\t\tctx-\u003ereparse_type = CIFS_REPARSE_TYPE_NFS;\nfs/smb/client/fs_context.c-360-\t\tbreak;\nfs/smb/client/fs_context.c-361-\tcase Opt_reparse_wsl:\nfs/smb/client/fs_context.c:362:\t\tctx-\u003ereparse_type = CIFS_REPARSE_TYPE_WSL;\nfs/smb/client/fs_context.c-363-\t\tbreak;\n--\nfs/smb/client/fs_context.c=383=static int parse_symlink_flavor(struct fs_context *fc, char *value,\n--\nfs/smb/client/fs_context.c-410-\tcase Opt_symlink_wsl:\nfs/smb/client/fs_context.c:411:\t\tctx-\u003esymlink_type = CIFS_SYMLINK_TYPE_WSL;\nfs/smb/client/fs_context.c-412-\t\tbreak;\n--\nfs/smb/client/fs_context.c=1958=int smb3_init_fs_context(struct fs_context *fc)\n--\nfs/smb/client/fs_context.c-2037-\tctx-\u003eretrans = 0;\nfs/smb/client/fs_context.c:2038:\tctx-\u003ereparse_type = CIFS_REPARSE_TYPE_DEFAULT;\nfs/smb/client/fs_context.c-2039-\tctx-\u003esymlink_type = CIFS_SYMLINK_TYPE_DEFAULT;\n--\nfs/smb/client/fs_context.c=2102=unsigned int smb3_update_mnt_flags(struct cifs_sb_info *cifs_sb)\n--\nfs/smb/client/fs_context.c-2142-\tif (ctx-\u003eno_xattr)\nfs/smb/client/fs_context.c:2143:\t\tsbflags |= CIFS_MOUNT_NO_XATTR;\nfs/smb/client/fs_context.c-2144-\telse\nfs/smb/client/fs_context.c:2145:\t\tsbflags \u0026= ~CIFS_MOUNT_NO_XATTR;\nfs/smb/client/fs_context.c-2146-\n--\nfs/smb/client/fs_context.h=346=static inline enum cifs_symlink_type cifs_symlink_type(struct cifs_sb_info *cifs_sb)\n--\nfs/smb/client/fs_context.h-358-\t\treturn posix ? CIFS_SYMLINK_TYPE_NATIVE : CIFS_SYMLINK_TYPE_UNIX;\nfs/smb/client/fs_context.h:359:\telse if (cifs_sb-\u003ectx-\u003ereparse_type != CIFS_REPARSE_TYPE_NONE)\nfs/smb/client/fs_context.h-360-\t\treturn CIFS_SYMLINK_TYPE_NATIVE;\n--\nfs/smb/client/inode.c=723=static int cifs_sfu_mode(struct cifs_fattr *fattr, const unsigned char *path,\n--\nfs/smb/client/inode.c-725-{\nfs/smb/client/inode.c:726:#ifdef CONFIG_CIFS_XATTR\nfs/smb/client/inode.c-727-\tssize_t rc;\n--\nfs/smb/client/inode.c=989=cifs_get_file_info(struct file *filp)\n--\nfs/smb/client/inode.c-1015-\t\t\tdata.reparse_point = true;\nfs/smb/client/inode.c:1016:\t\t\tdata.reparse.tag = IO_REPARSE_TAG_SYMLINK;\nfs/smb/client/inode.c-1017-\t\t}\n--\nfs/smb/client/inode.c=1181=static int reparse_info_to_fattr(struct cifs_open_info_data *data,\n--\nfs/smb/client/inode.c-1214-\t\tif (rc == -EOPNOTSUPP)\nfs/smb/client/inode.c:1215:\t\t\tdata-\u003ereparse.tag = IO_REPARSE_TAG_INTERNAL;\nfs/smb/client/inode.c-1216-\t}\n--\nfs/smb/client/inode.c-1220-\t\tbreak;\nfs/smb/client/inode.c:1221:\tcase IO_REPARSE_TAG_INTERNAL:\nfs/smb/client/inode.c-1222-\t\trc = 0;\n--\nfs/smb/client/inode.c-1245-\t\t\tif (rc == -EOPNOTSUPP \u0026\u0026\nfs/smb/client/inode.c:1246:\t\t\t IS_REPARSE_TAG_NAME_SURROGATE(data-\u003ereparse.tag) \u0026\u0026\nfs/smb/client/inode.c-1247-\t\t\t (cifs_open_data_attrs(data) \u0026 ATTR_DIRECTORY)) {\n--\nfs/smb/client/inode.c-1263-\nfs/smb/client/inode.c:1264:\t\tif (data-\u003ereparse.tag == IO_REPARSE_TAG_SYMLINK \u0026\u0026 !rc) {\nfs/smb/client/inode.c-1265-\t\t\tbool directory = cifs_open_data_attrs(data) \u0026 ATTR_DIRECTORY;\n--\nfs/smb/client/link.c=536=cifs_symlink(struct mnt_idmap *idmap, struct inode *inode,\n--\nfs/smb/client/link.c-606-\tcase CIFS_SYMLINK_TYPE_NFS:\nfs/smb/client/link.c:607:\tcase CIFS_SYMLINK_TYPE_WSL:\nfs/smb/client/link.c:608:\t\tif (CIFS_REPARSE_SUPPORT(pTcon)) {\nfs/smb/client/link.c-609-\t\t\trc = create_reparse_symlink(xid, inode, direntry, pTcon,\n--\nfs/smb/client/nterr.h=19=struct ntstatus_to_dos_err {\n--\nfs/smb/client/nterr.h-558-#define NT_STATUS_VOLUME_DISMOUNTED (0xC0000000 | 0x026e)\t// ERRDOS, 21\nfs/smb/client/nterr.h:559:#define NT_STATUS_NOT_A_REPARSE_POINT (0xC0000000 | 0x0275)\t// ERRHRD, ERRgeneral\nfs/smb/client/nterr.h:560:#define NT_STATUS_DIRECTORY_IS_A_REPARSE_POINT (0xC0000000 | 0x0281)\t// ERRDOS, 161\nfs/smb/client/nterr.h-561-#define NT_STATUS_ENCRYPTION_FAILED (0xC0000000 | 0x028a)\t// ERRDOS, ERRnoaccess\n--\nfs/smb/client/readdir.c=67=cifs_prime_dcache(struct dentry *parent, struct qstr *name,\n--\nfs/smb/client/readdir.c-98-\t\t\t}\nfs/smb/client/readdir.c:99:\t\t} else if (fattr-\u003ecf_cifsattrs \u0026 ATTR_REPARSE_POINT) {\nfs/smb/client/readdir.c-100-\t\t\treparse_need_reval = true;\n--\nfs/smb/client/readdir.c-138-\t\t\t\trc = 0;\nfs/smb/client/readdir.c:139:\t\t\t\tif (fattr-\u003ecf_cifsattrs \u0026 ATTR_REPARSE_POINT) {\nfs/smb/client/readdir.c-140-\t\t\t\t\tif (likely(reparse_inode_match(inode, fattr))) {\n--\nfs/smb/client/readdir.c=175=cifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb)\n--\nfs/smb/client/readdir.c-185-\t/*\nfs/smb/client/readdir.c:186:\t * The IO_REPARSE_TAG_LX_ tags originally were used by WSL but they\nfs/smb/client/readdir.c-187-\t * are preferred by the Linux client in some cases since, unlike\n--\nfs/smb/client/readdir.c-192-\t */\nfs/smb/client/readdir.c:193:\tif ((fattr-\u003ecf_cifsattrs \u0026 ATTR_REPARSE_POINT) \u0026\u0026\nfs/smb/client/readdir.c-194-\t cifs_reparse_point_to_fattr(cifs_sb, fattr, \u0026data))\n--\nfs/smb/client/readdir.c=242=cifs_posix_to_fattr(struct cifs_fattr *fattr, struct smb2_posix_info *info,\n--\nfs/smb/client/readdir.c-262-\nfs/smb/client/readdir.c:263:\tif (fattr-\u003ecf_cifsattrs \u0026 ATTR_REPARSE_POINT)\nfs/smb/client/readdir.c-264-\t\tfattr-\u003ecf_cifstag = le32_to_cpu(info-\u003eReparseTag);\n--\nfs/smb/client/readdir.c=321=static void cifs_fulldir_info_to_fattr(struct cifs_fattr *fattr,\n--\nfs/smb/client/readdir.c-329-\t/* See MS-FSCC 2.4.14, 2.4.19 */\nfs/smb/client/readdir.c:330:\tif (fattr-\u003ecf_cifsattrs \u0026 ATTR_REPARSE_POINT)\nfs/smb/client/readdir.c-331-\t\tfattr-\u003ecf_cifstag = le32_to_cpu(di-\u003eEaSize);\n--\nfs/smb/client/reparse.c=38=int create_reparse_symlink(const unsigned int xid, struct inode *inode,\n--\nfs/smb/client/reparse.c-46-\t\treturn mknod_nfs(xid, inode, dentry, tcon, full_path, S_IFLNK, 0, symname);\nfs/smb/client/reparse.c:47:\tcase CIFS_SYMLINK_TYPE_WSL:\nfs/smb/client/reparse.c-48-\t\treturn mknod_wsl(xid, inode, dentry, tcon, full_path, S_IFLNK, 0, symname);\n--\nfs/smb/client/reparse.c=54=static int create_native_symlink(const unsigned int xid, struct inode *inode,\n--\nfs/smb/client/reparse.c-73-\nfs/smb/client/reparse.c:74:\tif (strlen(symname) \u003e REPARSE_SYM_PATH_MAX)\nfs/smb/client/reparse.c-75-\t\treturn -ENAMETOOLONG;\n--\nfs/smb/client/reparse.c-84-\t\t.reparse_point = true,\nfs/smb/client/reparse.c:85:\t\t.reparse = { .tag = IO_REPARSE_TAG_SYMLINK, },\nfs/smb/client/reparse.c-86-\t\t.symlink_target = symlink_target,\n--\nfs/smb/client/reparse.c-222-\nfs/smb/client/reparse.c:223:\tslen = 2 * UniStrnlen((wchar_t *)path, REPARSE_SYM_PATH_MAX);\nfs/smb/client/reparse.c-224-\tpoff = 0;\n--\nfs/smb/client/reparse.c-240-\nfs/smb/client/reparse.c:241:\tbuf-\u003eReparseTag = cpu_to_le32(IO_REPARSE_TAG_SYMLINK);\nfs/smb/client/reparse.c-242-\tbuf-\u003eReparseDataLength = cpu_to_le16(len - sizeof(struct reparse_data_buffer));\n--\nfs/smb/client/reparse.c=272=static int detect_directory_symlink_target(struct cifs_sb_info *cifs_sb,\n--\nfs/smb/client/reparse.c-358-\toparms.create_options = cifs_create_options(cifs_sb,\nfs/smb/client/reparse.c:359:\t\t\t\t\t\t CREATE_NOT_FILE | OPEN_REPARSE_POINT);\nfs/smb/client/reparse.c-360-\topen_rc = tcon-\u003eses-\u003eserver-\u003eops-\u003eopen(xid, \u0026oparms, \u0026oplock, NULL);\n--\nfs/smb/client/reparse.c-377-\t\toparms.create_options = cifs_create_options(cifs_sb,\nfs/smb/client/reparse.c:378:\t\t\t\t\t\t\t CREATE_NOT_DIR | OPEN_REPARSE_POINT);\nfs/smb/client/reparse.c-379-\t\topen_rc = tcon-\u003eses-\u003eserver-\u003eops-\u003eopen(xid, \u0026oparms, \u0026oplock, NULL);\n--\nfs/smb/client/reparse.c=410=static int create_native_socket(const unsigned int xid, struct inode *inode,\n--\nfs/smb/client/reparse.c-414-\tstruct reparse_data_buffer buf = {\nfs/smb/client/reparse.c:415:\t\t.ReparseTag = cpu_to_le32(IO_REPARSE_TAG_AF_UNIX),\nfs/smb/client/reparse.c-416-\t\t.ReparseDataLength = cpu_to_le16(0),\n--\nfs/smb/client/reparse.c-419-\t\t.reparse_point = true,\nfs/smb/client/reparse.c:420:\t\t.reparse = { .tag = IO_REPARSE_TAG_AF_UNIX, .buf = \u0026buf, },\nfs/smb/client/reparse.c-421-\t};\n--\nfs/smb/client/reparse.c=440=static int nfs_set_reparse_buf(struct reparse_nfs_data_buffer *buf,\n--\nfs/smb/client/reparse.c-469-\nfs/smb/client/reparse.c:470:\tbuf-\u003eReparseTag = cpu_to_le32(IO_REPARSE_TAG_NFS);\nfs/smb/client/reparse.c-471-\tbuf-\u003eReserved = 0;\n--\nfs/smb/client/reparse.c=480=static int mknod_nfs(unsigned int xid, struct inode *inode,\n--\nfs/smb/client/reparse.c-518-\t\t.reparse_point = true,\nfs/smb/client/reparse.c:519:\t\t.reparse = { .tag = IO_REPARSE_TAG_NFS, .buf = (struct reparse_data_buffer *)p, },\nfs/smb/client/reparse.c-520-\t\t.symlink_target = kstrdup(symname, GFP_KERNEL),\n--\nfs/smb/client/reparse.c=539=static int wsl_set_reparse_buf(struct reparse_data_buffer **buf,\n--\nfs/smb/client/reparse.c-552-\tswitch ((tag = reparse_mode_wsl_tag(mode))) {\nfs/smb/client/reparse.c:553:\tcase IO_REPARSE_TAG_LX_BLK:\nfs/smb/client/reparse.c:554:\tcase IO_REPARSE_TAG_LX_CHR:\nfs/smb/client/reparse.c:555:\tcase IO_REPARSE_TAG_LX_FIFO:\nfs/smb/client/reparse.c:556:\tcase IO_REPARSE_TAG_AF_UNIX:\nfs/smb/client/reparse.c-557-\t\tbuf_len = sizeof(struct reparse_data_buffer);\n--\nfs/smb/client/reparse.c-561-\t\tbreak;\nfs/smb/client/reparse.c:562:\tcase IO_REPARSE_TAG_LX_SYMLINK:\nfs/smb/client/reparse.c-563-\t\tsymname_utf16 = cifs_strndup_to_utf16(symname, strlen(symname),\n--\nfs/smb/client/reparse.c=624=static int wsl_set_xattrs(struct inode *inode, umode_t _mode,\n--\nfs/smb/client/reparse.c-634-\tstruct wsl_xattr xattrs[] = {\nfs/smb/client/reparse.c:635:\t\t{ .name = SMB2_WSL_XATTR_UID, .value = uid, .size = SMB2_WSL_XATTR_UID_SIZE, },\nfs/smb/client/reparse.c:636:\t\t{ .name = SMB2_WSL_XATTR_GID, .value = gid, .size = SMB2_WSL_XATTR_GID_SIZE, },\nfs/smb/client/reparse.c:637:\t\t{ .name = SMB2_WSL_XATTR_MODE, .value = mode, .size = SMB2_WSL_XATTR_MODE_SIZE, },\nfs/smb/client/reparse.c:638:\t\t{ .name = SMB2_WSL_XATTR_DEV, .value = dev, .size = SMB2_WSL_XATTR_DEV_SIZE, },\nfs/smb/client/reparse.c-639-\t};\n--\nfs/smb/client/reparse.c-642-\tint i, num_xattrs;\nfs/smb/client/reparse.c:643:\tu8 name_size = SMB2_WSL_XATTR_NAME_LEN + 1;\nfs/smb/client/reparse.c-644-\n--\nfs/smb/client/reparse.c=731=int mknod_reparse(unsigned int xid, struct inode *inode,\n--\nfs/smb/client/reparse.c-736-\nfs/smb/client/reparse.c:737:\tif (S_ISSOCK(mode) \u0026\u0026 !ctx-\u003enonativesocket \u0026\u0026 ctx-\u003ereparse_type != CIFS_REPARSE_TYPE_NONE)\nfs/smb/client/reparse.c-738-\t\treturn create_native_socket(xid, inode, dentry, tcon, full_path);\n--\nfs/smb/client/reparse.c-740-\tswitch (ctx-\u003ereparse_type) {\nfs/smb/client/reparse.c:741:\tcase CIFS_REPARSE_TYPE_NFS:\nfs/smb/client/reparse.c-742-\t\treturn mknod_nfs(xid, inode, dentry, tcon, full_path, mode, dev, NULL);\nfs/smb/client/reparse.c:743:\tcase CIFS_REPARSE_TYPE_WSL:\nfs/smb/client/reparse.c-744-\t\treturn mknod_wsl(xid, inode, dentry, tcon, full_path, mode, dev, NULL);\n--\nfs/smb/client/reparse.c=1099=int parse_reparse_point(struct reparse_data_buffer *buf,\n--\nfs/smb/client/reparse.c-1107-\tswitch (le32_to_cpu(buf-\u003eReparseTag)) {\nfs/smb/client/reparse.c:1108:\tcase IO_REPARSE_TAG_NFS:\nfs/smb/client/reparse.c-1109-\t\treturn parse_reparse_nfs((struct reparse_nfs_data_buffer *)buf,\nfs/smb/client/reparse.c-1110-\t\t\t\t\t cifs_sb, data);\nfs/smb/client/reparse.c:1111:\tcase IO_REPARSE_TAG_SYMLINK:\nfs/smb/client/reparse.c-1112-\t\treturn parse_reparse_native_symlink(\n--\nfs/smb/client/reparse.c-1114-\t\t\tplen, cifs_sb, full_path, data);\nfs/smb/client/reparse.c:1115:\tcase IO_REPARSE_TAG_LX_SYMLINK:\nfs/smb/client/reparse.c-1116-\t\treturn parse_reparse_wsl_symlink(\n--\nfs/smb/client/reparse.c-1118-\t\t\tcifs_sb, data);\nfs/smb/client/reparse.c:1119:\tcase IO_REPARSE_TAG_AF_UNIX:\nfs/smb/client/reparse.c:1120:\tcase IO_REPARSE_TAG_LX_FIFO:\nfs/smb/client/reparse.c:1121:\tcase IO_REPARSE_TAG_LX_CHR:\nfs/smb/client/reparse.c:1122:\tcase IO_REPARSE_TAG_LX_BLK: {\nfs/smb/client/reparse.c-1123-\t\tu16 dlen = le16_to_cpu(buf-\u003eReparseDataLength);\n--\nfs/smb/client/reparse.c=1147=static bool wsl_to_fattr(struct cifs_open_info_data *data,\n--\nfs/smb/client/reparse.c-1161-\tswitch (tag) {\nfs/smb/client/reparse.c:1162:\tcase IO_REPARSE_TAG_LX_SYMLINK:\nfs/smb/client/reparse.c-1163-\t\tmode |= S_IFLNK;\nfs/smb/client/reparse.c-1164-\t\tbreak;\nfs/smb/client/reparse.c:1165:\tcase IO_REPARSE_TAG_LX_FIFO:\nfs/smb/client/reparse.c-1166-\t\tmode |= S_IFIFO;\nfs/smb/client/reparse.c-1167-\t\tbreak;\nfs/smb/client/reparse.c:1168:\tcase IO_REPARSE_TAG_AF_UNIX:\nfs/smb/client/reparse.c-1169-\t\tmode |= S_IFSOCK;\nfs/smb/client/reparse.c-1170-\t\tbreak;\nfs/smb/client/reparse.c:1171:\tcase IO_REPARSE_TAG_LX_CHR:\nfs/smb/client/reparse.c-1172-\t\tmode |= S_IFCHR;\nfs/smb/client/reparse.c-1173-\t\tbreak;\nfs/smb/client/reparse.c:1174:\tcase IO_REPARSE_TAG_LX_BLK:\nfs/smb/client/reparse.c-1175-\t\tmode |= S_IFBLK;\n--\nfs/smb/client/reparse.c-1196-\nfs/smb/client/reparse.c:1197:\t\tif (!strncmp(name, SMB2_WSL_XATTR_UID, nlen)) {\nfs/smb/client/reparse.c-1198-\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_UID))\nfs/smb/client/reparse.c-1199-\t\t\t\tuid = wsl_make_kuid(cifs_sb, v);\nfs/smb/client/reparse.c:1200:\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_GID, nlen)) {\nfs/smb/client/reparse.c-1201-\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_GID))\nfs/smb/client/reparse.c-1202-\t\t\t\tgid = wsl_make_kgid(cifs_sb, v);\nfs/smb/client/reparse.c:1203:\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_MODE, nlen)) {\nfs/smb/client/reparse.c-1204-\t\t\t/* File type in reparse point tag and in xattr mode must match. */\n--\nfs/smb/client/reparse.c-1207-\t\t\tmode = get_unaligned_le32(v);\nfs/smb/client/reparse.c:1208:\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_DEV, nlen)) {\nfs/smb/client/reparse.c-1209-\t\t\trdev = reparse_mkdev(v);\n--\nfs/smb/client/reparse.c-1214-\t/* Major and minor numbers for char and block devices are mandatory. */\nfs/smb/client/reparse.c:1215:\tif (!have_xattr_dev \u0026\u0026 (tag == IO_REPARSE_TAG_LX_CHR || tag == IO_REPARSE_TAG_LX_BLK))\nfs/smb/client/reparse.c-1216-\t\treturn false;\n--\nfs/smb/client/reparse.c=1274=bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb,\n--\nfs/smb/client/reparse.c-1281-\tswitch (tag) {\nfs/smb/client/reparse.c:1282:\tcase IO_REPARSE_TAG_LX_SYMLINK:\nfs/smb/client/reparse.c:1283:\tcase IO_REPARSE_TAG_LX_FIFO:\nfs/smb/client/reparse.c:1284:\tcase IO_REPARSE_TAG_AF_UNIX:\nfs/smb/client/reparse.c:1285:\tcase IO_REPARSE_TAG_LX_CHR:\nfs/smb/client/reparse.c:1286:\tcase IO_REPARSE_TAG_LX_BLK:\nfs/smb/client/reparse.c-1287-\t\tok = wsl_to_fattr(data, cifs_sb, tag, fattr);\n--\nfs/smb/client/reparse.c-1290-\t\tbreak;\nfs/smb/client/reparse.c:1291:\tcase IO_REPARSE_TAG_NFS:\nfs/smb/client/reparse.c-1292-\t\tok = posix_reparse_to_fattr(cifs_sb, fattr, data);\n--\nfs/smb/client/reparse.c-1296-\tcase 0: /* SMB1 symlink */\nfs/smb/client/reparse.c:1297:\tcase IO_REPARSE_TAG_SYMLINK:\nfs/smb/client/reparse.c-1298-\t\tfattr-\u003ecf_mode \u0026= ~S_IFMT;\n--\nfs/smb/client/reparse.c-1303-\t\t\treturn false;\nfs/smb/client/reparse.c:1304:\t\tif (!IS_REPARSE_TAG_NAME_SURROGATE(tag) \u0026\u0026\nfs/smb/client/reparse.c:1305:\t\t tag != IO_REPARSE_TAG_INTERNAL)\nfs/smb/client/reparse.c-1306-\t\t\treturn false;\n--\nfs/smb/client/reparse.h-5-\nfs/smb/client/reparse.h:6:#ifndef _CIFS_REPARSE_H\nfs/smb/client/reparse.h:7:#define _CIFS_REPARSE_H\nfs/smb/client/reparse.h-8-\n--\nfs/smb/client/reparse.h-16-\nfs/smb/client/reparse.h:17:#define REPARSE_SYM_PATH_MAX 4060\nfs/smb/client/reparse.h-18-\n--\nfs/smb/client/reparse.h-20- * Used only by cifs.ko to ignore reparse points from files when client or\nfs/smb/client/reparse.h:21: * server doesn't support FSCTL_GET_REPARSE_POINT.\nfs/smb/client/reparse.h-22- */\nfs/smb/client/reparse.h:23:#define IO_REPARSE_TAG_INTERNAL ((__u32)~0U)\nfs/smb/client/reparse.h-24-\n--\nfs/smb/client/reparse.h=64=static inline u32 reparse_mode_wsl_tag(mode_t mode)\n--\nfs/smb/client/reparse.h-66-\tswitch (mode \u0026 S_IFMT) {\nfs/smb/client/reparse.h:67:\tcase S_IFLNK: return IO_REPARSE_TAG_LX_SYMLINK;\nfs/smb/client/reparse.h:68:\tcase S_IFBLK: return IO_REPARSE_TAG_LX_BLK;\nfs/smb/client/reparse.h:69:\tcase S_IFCHR: return IO_REPARSE_TAG_LX_CHR;\nfs/smb/client/reparse.h:70:\tcase S_IFIFO: return IO_REPARSE_TAG_LX_FIFO;\nfs/smb/client/reparse.h:71:\tcase S_IFSOCK: return IO_REPARSE_TAG_AF_UNIX;\nfs/smb/client/reparse.h-72-\t}\n--\nfs/smb/client/reparse.h=83=static inline bool reparse_inode_match(struct inode *inode,\n--\nfs/smb/client/reparse.h-90-\t * Do not match reparse tags when client or server doesn't support\nfs/smb/client/reparse.h:91:\t * FSCTL_GET_REPARSE_POINT. @fattr-\u003ecf_cifstag should contain correct\nfs/smb/client/reparse.h-92-\t * reparse tag from query dir response but the client won't be able to\n--\nfs/smb/client/reparse.h-94-\t */\nfs/smb/client/reparse.h:95:\tif (cinode-\u003ereparse_tag != IO_REPARSE_TAG_INTERNAL \u0026\u0026\nfs/smb/client/reparse.h-96-\t cinode-\u003ereparse_tag != fattr-\u003ecf_cifstag)\nfs/smb/client/reparse.h-97-\t\treturn false;\nfs/smb/client/reparse.h:98:\treturn (cinode-\u003ecifsAttrs \u0026 ATTR_REPARSE_POINT) \u0026\u0026\nfs/smb/client/reparse.h-99-\t\ttimespec64_equal(\u0026ctime, \u0026fattr-\u003ecf_ctime);\n--\nfs/smb/client/reparse.h=110=static inline bool cifs_open_data_reparse(struct cifs_open_info_data *data)\n--\nfs/smb/client/reparse.h-117-\t\tif (data-\u003ereparse_point) {\nfs/smb/client/reparse.h:118:\t\t\tattrs |= ATTR_REPARSE_POINT;\nfs/smb/client/reparse.h-119-\t\t\tfi-\u003eDosAttributes = cpu_to_le32(attrs);\n--\nfs/smb/client/reparse.h-125-\t\tif (data-\u003ereparse_point) {\nfs/smb/client/reparse.h:126:\t\t\tattrs |= ATTR_REPARSE_POINT;\nfs/smb/client/reparse.h-127-\t\t\tfi-\u003eAttributes = cpu_to_le32(attrs);\n--\nfs/smb/client/reparse.h-130-\nfs/smb/client/reparse.h:131:\treturn attrs \u0026 ATTR_REPARSE_POINT;\nfs/smb/client/reparse.h-132-}\n--\nfs/smb/client/reparse.h=143=struct reparse_data_buffer *smb2_get_reparse_point_buffer(const struct kvec *rsp_iov,\n--\nfs/smb/client/reparse.h-145-\nfs/smb/client/reparse.h:146:#endif /* _CIFS_REPARSE_H */\n--\nfs/smb/client/smb1maperror.c=103=map_smb_to_linux_error(char *buf, bool logErr)\n--\nfs/smb/client/smb1maperror.c-156-\t\t__u32 err = le32_to_cpu(smb-\u003eStatus.CifsError);\nfs/smb/client/smb1maperror.c:157:\t\tif (err == (NT_STATUS_NOT_A_REPARSE_POINT))\nfs/smb/client/smb1maperror.c-158-\t\t\trc = -ENODATA;\n--\n\n"
} |
| 15/2 | 2026/09/16 16:00 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 22544 output: 34 thoughts: 36 Thoughts: Here's my take: **Investigating the Compilation of `reparse.c` within CIFS** Alright, let's dive into this. `reparse.c` is clearly part of the CIFS file system implementation, so the first logical step is to understand how it's being compiled. I'll need to check the build process specifics within the CIFS directory, specifically the makefile. `fs/smb/client/Makefile` is the likely candidate for that information. Let's see how that module is put together. It should reveal any dependencies, compiler flags, and the overall integration of `reparse.c` into the larger SMB/CIFS client code. That'll be the starting point to understand its build environment. |
| 16/2 | 2026/09/16 16:01 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/Makefile",
"FirstLine": 1,
"LineCount": 40
}Results: {
"Contents": " 1:\t# SPDX-License-Identifier: GPL-2.0\n 2:\t#\n 3:\t# Makefile for Linux CIFS/SMB2/SMB3 VFS client\n 4:\t#\n 5:\tccflags-y += -I$(src)\t\t# needed for trace events\n 6:\tobj-$(CONFIG_CIFS) += cifs.o\n 7:\t\n 8:\tcifs-y := trace.o cifsfs.o cifs_debug.o connect.o dir.o file.o \\\n 9:\t\t inode.o link.o misc.o netmisc.o smbencrypt.o transport.o \\\n 10:\t\t cached_dir.o cifs_unicode.o cifsencrypt.o \\\n 11:\t\t readdir.o ioctl.o sess.o export.o unc.o winucase.o \\\n 12:\t\t smb2ops.o smb2maperror.o smb2transport.o \\\n 13:\t\t smb2misc.o smb2pdu.o smb2inode.o smb2file.o cifsacl.o fs_context.o \\\n 14:\t\t dns_resolve.o cifs_spnego_negtokeninit.asn1.o asn1.o \\\n 15:\t\t namespace.o reparse.o\n 16:\t\n 17:\t$(obj)/asn1.o: $(obj)/cifs_spnego_negtokeninit.asn1.h\n 18:\t\n 19:\t$(obj)/cifs_spnego_negtokeninit.asn1.o: $(obj)/cifs_spnego_negtokeninit.asn1.c $(obj)/cifs_spnego_negtokeninit.asn1.h\n 20:\t\n 21:\tcifs-$(CONFIG_CIFS_XATTR) += xattr.o\n 22:\t\n 23:\tcifs-$(CONFIG_CIFS_UPCALL) += cifs_spnego.o\n 24:\t\n 25:\tcifs-$(CONFIG_CIFS_DFS_UPCALL) += dfs_cache.o dfs.o\n 26:\t\n 27:\tcifs-$(CONFIG_CIFS_SWN_UPCALL) += netlink.o cifs_swn.o\n 28:\t\n 29:\tcifs-$(CONFIG_CIFS_FSCACHE) += fscache.o\n 30:\t\n 31:\tcifs-$(CONFIG_CIFS_SMB_DIRECT) += smbdirect.o\n 32:\t\n 33:\tcifs-$(CONFIG_CIFS_ROOT) += cifsroot.o\n 34:\t\n 35:\tcifs-$(CONFIG_CIFS_ALLOW_INSECURE_LEGACY) += \\\n 36:\t\tcifssmb.o \\\n 37:\t\tsmb1debug.o \\\n 38:\t\tsmb1encrypt.o \\\n 39:\t\tsmb1maperror.o \\\n 40:\t\tsmb1misc.o \\\n"
} |
| 17/2 | 2026/09/16 16:01 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 23533 output: 20 thoughts: 2398 Thoughts: **CIFS Fuzzing Analysis**
Okay, let's break this down systematically. The question is whether this change in `reparse.c` within the CIFS module is fuzzable, specifically using syzkaller. First, `reparse.o` is unconditionally included in `cifs.o` if CONFIG_CIFS is enabled. That's a good starting point.
Now, let's refer to the core triage philosophy. Reachability is key. Can this code *actually* execute in a standard virtualized environment? The documentation indicates that "Reachable Drivers and Protocols" are fuzzable, particularly those accessible via virtual buses, sockets, or loopback. CIFS, as a network filesystem client, communicates over TCP port 445 (SMB) or 139 over loopback or virtual network. Bingo! It seems reachable via sockets/loopback which is a virtual bus.
We need to confirm that syzkaller *can* interact with CIFS. Can syzkaller reach cifs? Can it mount CIFS? Can a user run `mount("...", "...", "cifs", ...)`? Can a user, possibly unprivileged, mount CIFS? Running as root in syzkaller is a possibility, or using user namespaces. We'll need to check the CIFS `fs_flags` for `FS_USERNS_MOUNT` to confirm.
The core of the change in `wsl_to_fattr` is interesting. Previously, there was partial modification of `fattr` (file attributes) on failure, and potential unaligned pointer dereferences. Now, the `fattr` is only modified on success, and unaligned access is handled more robustly with the `get_unaligned_*` functions. This improves reliability and potentially prevents crashes or undefined behavior.
To determine if this change is worth fuzzing, we need to ensure `wsl_to_fattr` is reachable. Let's see how `cifs_reparse_point_to_fattr` is called, which calls `wsl_to_fattr`. It's called under certain conditions in `cifs_fill_common_info` (readdir) if the `fattr` has the `ATTR_REPARSE_POINT` attribute. Additionally, the function is called in `cifs_open_info_to_fattr` and `smb311_posix_info_to_fattr` when `cifs_open_data_reparse(data)` is reached. These are all part of CIFS' normal operation. This implies it's reachable.
Therefore, since CIFS is reachable via sockets/loopback (which syzkaller can likely exercise), and given that this patch modifies reachable executable code within a critical filesystem module (especially when the patch fixes potential data corruption), fuzzing this change seems absolutely warranted. The change introduces a new failure mode and could expose new bugs. This makes it a high-priority fuzzing target, particularly given that the patch touches *reachable* executable code and *improves data integrity*.
|
| 18/2 | 2026/09/16 16:02 | tool | grepper |
0mArgs:{
"Expression": "cifs_fs_type"
}Results: {
"Output": "fs/smb/client/cifsfs.c=1143=cifs_setlease(struct file *file, int arg, struct file_lease **lease, void **priv)\n--\nfs/smb/client/cifsfs.c-1171-\nfs/smb/client/cifsfs.c:1172:struct file_system_type cifs_fs_type = {\nfs/smb/client/cifsfs.c-1173-\t.owner = THIS_MODULE,\n--\nfs/smb/client/cifsfs.c=1979=init_cifs(void)\n--\nfs/smb/client/cifsfs.c-2135-\nfs/smb/client/cifsfs.c:2136:\trc = register_filesystem(\u0026cifs_fs_type);\nfs/smb/client/cifsfs.c-2137-\tif (rc)\n--\nfs/smb/client/cifsfs.c-2141-\tif (rc) {\nfs/smb/client/cifsfs.c:2142:\t\tunregister_filesystem(\u0026cifs_fs_type);\nfs/smb/client/cifsfs.c-2143-\t\tgoto out_init_cifs_idmap;\n--\nfs/smb/client/cifsfs.c=2190=exit_cifs(void)\n--\nfs/smb/client/cifsfs.c-2192-\tcifs_dbg(NOISY, \"exit_smb3\\n\");\nfs/smb/client/cifsfs.c:2193:\tunregister_filesystem(\u0026cifs_fs_type);\nfs/smb/client/cifsfs.c-2194-\tunregister_filesystem(\u0026smb3_fs_type);\n--\nfs/smb/client/cifsfs.h=40=static inline unsigned long cifs_get_time(struct dentry *dentry)\n--\nfs/smb/client/cifsfs.h-44-\nfs/smb/client/cifsfs.h:45:extern struct file_system_type cifs_fs_type, smb3_fs_type;\nfs/smb/client/cifsfs.h-46-extern const struct address_space_operations cifs_addr_ops;\n--\nfs/smb/client/misc.c=906=static struct super_block *__cifs_get_super(void (*f)(struct super_block *, void *),\n--\nfs/smb/client/misc.c-913-\tstruct file_system_type **fs_type = (struct file_system_type *[]) {\nfs/smb/client/misc.c:914:\t\t\u0026cifs_fs_type, \u0026smb3_fs_type, NULL,\nfs/smb/client/misc.c-915-\t};\n"
} |
| 19/2 | 2026/09/16 16:02 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 27333 output: 41 thoughts: 30 Thoughts: Okay, let's dive into this. Here's my thought process on getting up to speed with `cifs_fs_type`: **Understanding `cifs_fs_type`** Alright, my immediate thought is to get my hands dirty. I need the definitive source, so I'm heading straight to the code itself. Specifically, I need to see the definition of `cifs_fs_type`. Let's locate it within `fs/smb/client/cifsfs.c`. I need that precise definition to understand its structure and purpose. That's the first step - concrete, verifiable information from the source. Only then can I form an accurate understanding. |
| 20/2 | 2026/09/16 16:02 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/cifsfs.c",
"FirstLine": 1170,
"LineCount": 20
}Results: {
"Contents": "1170:\t}\n1171:\t\n1172:\tstruct file_system_type cifs_fs_type = {\n1173:\t\t.owner = THIS_MODULE,\n1174:\t\t.name = \"cifs\",\n1175:\t\t.init_fs_context = smb3_init_fs_context,\n1176:\t\t.parameters = smb3_fs_parameters,\n1177:\t\t.kill_sb = cifs_kill_sb,\n1178:\t\t.fs_flags = FS_RENAME_DOES_D_MOVE,\n1179:\t};\n1180:\tMODULE_ALIAS_FS(\"cifs\");\n1181:\t\n1182:\tstruct file_system_type smb3_fs_type = {\n1183:\t\t.owner = THIS_MODULE,\n1184:\t\t.name = \"smb3\",\n1185:\t\t.init_fs_context = smb3_init_fs_context,\n1186:\t\t.parameters = smb3_fs_parameters,\n1187:\t\t.kill_sb = cifs_kill_sb,\n1188:\t\t.fs_flags = FS_RENAME_DOES_D_MOVE,\n1189:\t};\n"
} |
| 21/2 | 2026/09/16 16:02 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 27886 output: 34 thoughts: 173 Thoughts: **My Line of Inquiry: Syzkaller and CIFS Fuzzing**
Okay, so I'm looking at how syzkaller operates and I've noticed it runs with pretty high privileges, like root or at least CAP_SYS_ADMIN. That means `mount("cifs", ...)` is definitely on the table for exploitation. But the question that immediately springs to mind is, can CIFS mount *without* a live server being present? Or, are we always dependent on either a running server like ksmbd, Samba, or even a syzkaller-specific faked socket server to handle the handshake?
Hold on a second! This is interesting... I've got to remember that Linux now has `ksmbd` – the in-kernel SMB server! That changes things.
Okay, back to the core question: does syzkaller actually *fuzz* CIFS? That's what I really need to know.
Time to do some digging. I need to figure out if syzkaller has any dedicated support for CIFS or SMB. I'm going to search for any mentions of "cifs" in the syzkaller tree or in the commit logs, and look for any indication that it specifically targets CIFS.
Alright, let's take a quick look at the git log for `fs/smb/client`. That should be the best place to find reports from syzbot if it's been finding any crashes in this area. That should give me the answer quickly.
|
| 22/2 | 2026/09/16 16:02 | tool | grepper |
0mError:no matches Args: {
"Expression": "syzkaller|syzbot",
"PathPrefix": "fs/smb/client/"
}Results: {
"error": "no matches"
} |
| 23/2 | 2026/09/16 16:02 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 28425 output: 30 thoughts: 82 Thoughts: **My Thought Process on Hunting for Syzbot Mentions** Okay, hold on a second. I need to make sure I'm using the right tool for the job. `grepper` searches kernel sources, not git logs, right? Yes, that's it - it's basically a wrapper for `git grep` that targets the kernel source tree. So, I need to look for mentions of "syzbot" within the kernel code itself. My initial thought was to check within `fs/smb/client/` specifically, because I'm familiar with that area. Let's see... nothing. No luck there. Alright, time for a broader approach. I need to widen the net. Maybe there are mentions elsewhere in the SMB filesystem code. Let's check `grepper` again, searching more broadly in `fs/smb/` or even other possibly relevant areas. This feels like the right direction to keep me moving forward. |
| 24/2 | 2026/09/16 16:02 | tool | grepper |
0mError:no matches Args: {
"Expression": "syzbot",
"PathPrefix": "fs/smb/server/"
}Results: {
"error": "no matches"
} |
| 25/2 | 2026/09/16 16:02 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 28754 output: 35 thoughts: 1397 Thoughts: **Fuzzing Decision for CIFS Reparse Code**
Okay, let's break this down systematically. My objective is to decide whether the changes in `fs/smb/client/reparse.c` warrant fuzzing. The key principle here, as I understand it, is reachability. Is the modified code accessible in standard fuzzing environments? Let's refresh our understanding of the criteria laid out:
I'm reviewing Section 1 and Section 2. The core triage philosophy emphasizes that reachability is paramount. We must avoid blindly trusting claims of "no functional change" – refactorings can introduce subtle bugs. My instinct is that this change falls squarely into the refactoring camp, so that gives me pause. And, of course, the introduction or modification of assertions is a definite trigger for fuzzing.
My primary task is to determine whether the changes fall strictly into the *negative* criteria for skipping fuzzing:
1. **Non-kernel and non-executable changes:** This is immediately a no. It's kernel C code. Not docs, scripts, or build system tweaks.
2. **Structurally unreachable hardware:** CIFS is a network filesystem client, a software construct communicating over standard TCP/IP. It's not vendor-specific hardware or drivers that require special emulated hardware that I can't easily simulate in QEMU. It's not a GPU, PCIe, or SmartNIC thing.
3. **Unreachable execution paths:** Definitely not. This isn't a driver teardown callback, nor is it architecture-specific code that's not relevant to my testing environment.
So, I don't see any of the "negative criteria" applying. I'm seeing that this is a reachable code change.
In fact, reading Section 3, I find that CIFS is specifically addressed. The changes involve drivers/protocols accessible via sockets, and network access is explicitly mentioned. This code path is relevant.
Furthermore, I have assessed the changes in `wsl_to_fattr`:
* It involves modifying data structures and algorithm flows, which means that fuzzing is appropriate.
* The refactoring changes how data is validated and assigned to the `fattr` structure. There's a clear change in how it handles errors and intermediate data. This can easily introduce edge cases that need testing.
* Direct pointer casts are replaced with safer, more robust memory access functions such as `get_unaligned_le32`, and `get_unaligned_le64`
* This is a refactoring, but a very important one.
Therefore, `WorthFuzzing` MUST be `true`.
Now, I need to figure out the required configurations for this fuzzing effort, particularly the kernel configs. I will check the `Kconfig` for CIFS and look for the relevant configuration options. Specifically, the dependencies.
|
| 26/2 | 2026/09/16 16:03 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/Kconfig",
"FirstLine": 1,
"LineCount": 80
}Results: {
"Contents": " 1:\t# SPDX-License-Identifier: GPL-2.0-only\n 2:\tconfig CIFS\n 3:\t\ttristate \"SMB3 and CIFS support (advanced network filesystem)\"\n 4:\t\tdepends on INET\n 5:\t\tselect NLS\n 6:\t\tselect NLS_UCS2_UTILS\n 7:\t\tselect CRYPTO\n 8:\t\tselect CRYPTO_AEAD2\n 9:\t\tselect CRYPTO_CCM\n 10:\t\tselect CRYPTO_GCM\n 11:\t\tselect CRYPTO_AES\n 12:\t\tselect CRYPTO_LIB_AES_CBC_MACS\n 13:\t\tselect CRYPTO_LIB_ARC4\n 14:\t\tselect CRYPTO_LIB_MD5\n 15:\t\tselect CRYPTO_LIB_SHA256\n 16:\t\tselect CRYPTO_LIB_SHA512\n 17:\t\tselect KEYS\n 18:\t\tselect DNS_RESOLVER\n 19:\t\tselect ASN1\n 20:\t\tselect OID_REGISTRY\n 21:\t\tselect NETFS_SUPPORT\n 22:\t\thelp\n 23:\t\t This is the client VFS module for the SMB3 family of network file\n 24:\t\t protocols (including the most recent, most secure dialect SMB3.1.1).\n 25:\t\t This module also includes support for earlier dialects such as\n 26:\t\t SMB2.1, SMB2 and even the old Common Internet File System (CIFS)\n 27:\t\t protocol. CIFS was the successor to the original network filesystem\n 28:\t\t protocol, Server Message Block (SMB ie SMB1), the native file sharing\n 29:\t\t mechanism for most early PC operating systems.\n 30:\t\n 31:\t\t The SMB3.1.1 protocol is supported by most modern operating systems\n 32:\t\t and NAS appliances (e.g. Samba, Windows 11, Windows Server 2022,\n 33:\t\t MacOS) and even in the cloud (e.g. Microsoft Azure) and also by the\n 34:\t\t Linux kernel server, ksmbd. Support for the older CIFS protocol was\n 35:\t\t included in Windows NT4, 2000 and XP (and later). Use of dialects\n 36:\t\t older than SMB2.1 is often discouraged on public networks.\n 37:\t\t This module also provides limited support for OS/2 and Windows ME\n 38:\t\t and similar very old servers.\n 39:\t\n 40:\t\t This module provides an advanced network file system client for\n 41:\t\t mounting to SMB3 (and CIFS) compliant servers. It includes support\n 42:\t\t for DFS (hierarchical name space), secure per-user session\n 43:\t\t establishment via Kerberos or NTLMv2, RDMA (smbdirect), advanced\n 44:\t\t security features, per-share encryption, packet-signing, snapshots,\n 45:\t\t directory leases, safe distributed caching (leases), multichannel,\n 46:\t\t Unicode and other internationalization improvements.\n 47:\t\n 48:\t\t In general, the default dialects, SMB3 and later, enable better\n 49:\t\t performance, security and features, than would be possible with CIFS.\n 50:\t\n 51:\t\t If you need to mount to Samba, Azure, ksmbd, Macs or Windows from this\n 52:\t\t machine, say Y.\n 53:\t\n 54:\tconfig CIFS_STATS2\n 55:\t\tbool \"Extended statistics\"\n 56:\t\tdepends on CIFS\n 57:\t\tdefault y\n 58:\t\thelp\n 59:\t\t Enabling this option will allow more detailed statistics on SMB\n 60:\t\t request timing to be displayed in /proc/fs/cifs/DebugData and also\n 61:\t\t allow optional logging of slow responses to dmesg (depending on the\n 62:\t\t value of /proc/fs/cifs/cifsFYI). See Documentation/admin-guide/cifs/usage.rst\n 63:\t\t for more details. These additional statistics may have a minor effect\n 64:\t\t on performance and memory utilization.\n 65:\t\n 66:\t\t If unsure, say Y.\n 67:\t\n 68:\tconfig CIFS_ALLOW_INSECURE_LEGACY\n 69:\t\tbool \"Support legacy servers which use less secure dialects\"\n 70:\t\tdepends on CIFS\n 71:\t\tdefault y\n 72:\t\thelp\n 73:\t\t Modern dialects, SMB2.1 and later (including SMB3 and 3.1.1), have\n 74:\t\t additional security features, including protection against\n 75:\t\t man-in-the-middle attacks and stronger crypto hashes, so the use\n 76:\t\t of legacy dialects (SMB1/CIFS and SMB2.0) is discouraged.\n 77:\t\n 78:\t\t Disabling this option prevents users from using vers=1.0 or vers=2.0\n 79:\t\t on mounts with cifs.ko\n 80:\t\n"
} |
| 27/2 | 2026/09/16 16:03 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 32061 output: 31 thoughts: 139 Thoughts: **Investigating CIFS Dependencies and Configuration Requirements** Okay, so I'm looking at how `CIFS` is set up. First, I know `CIFS` relies on `INET`. But now I need to figure out if there are any other configuration dependencies, specifically related to the `reparse.c` and `wsl_to_fattr` modules. I need to make sure I don't miss anything. My next step is to check `CIFS_XATTR`. Is `CONFIG_CIFS_XATTR` a necessary component for `wsl_to_fattr` or within `reparse`? I need to clarify that dependency. Then, I'll need to see where `wsl_to_fattr` is called. Also, I'll review `reparse.c` to look for any conditional compilation `#ifdef` blocks. I'll need to understand if the features that are dependent on `reparse.c` are enabled by default, or are disabled unless a particular configuration option is set. Finally, I'll run a `grep` to quickly find any instances of `#ifdef` in both `fs/smb/client/reparse.c` and `fs/smb/client/reparse.h` to see how the code is conditionally compiled. This will give me a comprehensive picture of what's going on. |
| 28/2 | 2026/09/16 16:03 | tool | grepper |
0mError:no matches Args: {
"Expression": "#if",
"PathPrefix": "fs/smb/client/reparse"
}Results: {
"error": "no matches"
} |
| 29/2 | 2026/09/16 16:03 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 32539 output: 36 thoughts: 305 Thoughts: **My Investigation into SMB Reparse Point Handling**
Okay, so I'm looking at `fs/smb/client/reparse.c` and `fs/smb/client/reparse.h`, and it looks like there are no preprocessor directives like `#if` or `#ifdef` in them. That's good to know. Now, let's pivot to the broader CIFS XATTR situation within `fs/smb/client/`. I vaguely recall something about extended attributes.
Let me see... digging into `cifssmb.c`… Aha! I'm seeing this conditional compilation around `CONFIG_CIFS_XATTR`:
```c
#ifndef CONFIG_CIFS_XATTR
if (xattr_iov)
```
and
```c
#ifdef CONFIG_CIFS_XATTR
if (xattr_iov) {
```
Interesting. Now, a quick check of the kconfig entry... `CIFS_XATTR` is a boolean option, dependent on `CIFS`, and defaults to `y`. Essentially, it controls whether CIFS supports extended attributes. The documentation states that CIFS maps client-side extended attributes to the `ea_data` field within the SMB2 file descriptor.
Now, a crucial question arises. Is the WSL reparse point parsing *directly* reliant on `CIFS_XATTR`, or does it handle the server's extended attribute (EA) query responses independently? I need to clarify this dependency.
Time to delve deeper. I'll need to search the `fs/smb/client/` directory for any references to `SMB2_WSL_XATTR_UID` or the keyword "wsl". This should hopefully shed light on how WSL accesses EAs in this context.
|
| 30/2 | 2026/09/16 16:03 | tool | grepper |
0mArgs:{
"Expression": "SMB2_WSL_XATTR_",
"PathPrefix": "fs/smb/client/"
}Results: {
"Output": "fs/smb/client/reparse.c=624=static int wsl_set_xattrs(struct inode *inode, umode_t _mode,\n--\nfs/smb/client/reparse.c-634-\tstruct wsl_xattr xattrs[] = {\nfs/smb/client/reparse.c:635:\t\t{ .name = SMB2_WSL_XATTR_UID, .value = uid, .size = SMB2_WSL_XATTR_UID_SIZE, },\nfs/smb/client/reparse.c:636:\t\t{ .name = SMB2_WSL_XATTR_GID, .value = gid, .size = SMB2_WSL_XATTR_GID_SIZE, },\nfs/smb/client/reparse.c:637:\t\t{ .name = SMB2_WSL_XATTR_MODE, .value = mode, .size = SMB2_WSL_XATTR_MODE_SIZE, },\nfs/smb/client/reparse.c:638:\t\t{ .name = SMB2_WSL_XATTR_DEV, .value = dev, .size = SMB2_WSL_XATTR_DEV_SIZE, },\nfs/smb/client/reparse.c-639-\t};\n--\nfs/smb/client/reparse.c-642-\tint i, num_xattrs;\nfs/smb/client/reparse.c:643:\tu8 name_size = SMB2_WSL_XATTR_NAME_LEN + 1;\nfs/smb/client/reparse.c-644-\n--\nfs/smb/client/reparse.c=1147=static bool wsl_to_fattr(struct cifs_open_info_data *data,\n--\nfs/smb/client/reparse.c-1196-\nfs/smb/client/reparse.c:1197:\t\tif (!strncmp(name, SMB2_WSL_XATTR_UID, nlen)) {\nfs/smb/client/reparse.c-1198-\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_UID))\nfs/smb/client/reparse.c-1199-\t\t\t\tuid = wsl_make_kuid(cifs_sb, v);\nfs/smb/client/reparse.c:1200:\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_GID, nlen)) {\nfs/smb/client/reparse.c-1201-\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_GID))\nfs/smb/client/reparse.c-1202-\t\t\t\tgid = wsl_make_kgid(cifs_sb, v);\nfs/smb/client/reparse.c:1203:\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_MODE, nlen)) {\nfs/smb/client/reparse.c-1204-\t\t\t/* File type in reparse point tag and in xattr mode must match. */\n--\nfs/smb/client/reparse.c-1207-\t\t\tmode = get_unaligned_le32(v);\nfs/smb/client/reparse.c:1208:\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_DEV, nlen)) {\nfs/smb/client/reparse.c-1209-\t\t\trdev = reparse_mkdev(v);\n--\nfs/smb/client/smb1ops.c=532=static int cifs_query_path_info(const unsigned int xid,\n--\nfs/smb/client/smb1ops.c-667-\nfs/smb/client/smb1ops.c:668:\t\trc = CIFSSMBQAllEAs(xid, tcon, full_path, SMB2_WSL_XATTR_MODE,\nfs/smb/client/smb1ops.c:669:\t\t\t\t \u0026ea-\u003eea_data[SMB2_WSL_XATTR_NAME_LEN + 1],\nfs/smb/client/smb1ops.c:670:\t\t\t\t SMB2_WSL_XATTR_MODE_SIZE, cifs_sb);\nfs/smb/client/smb1ops.c:671:\t\tif (rc == SMB2_WSL_XATTR_MODE_SIZE) {\nfs/smb/client/smb1ops.c-672-\t\t\tea-\u003enext_entry_offset = cpu_to_le32(0);\nfs/smb/client/smb1ops.c-673-\t\t\tea-\u003eflags = 0;\nfs/smb/client/smb1ops.c:674:\t\t\tea-\u003eea_name_length = SMB2_WSL_XATTR_NAME_LEN;\nfs/smb/client/smb1ops.c:675:\t\t\tea-\u003eea_value_length = cpu_to_le16(SMB2_WSL_XATTR_MODE_SIZE);\nfs/smb/client/smb1ops.c:676:\t\t\tmemcpy(\u0026ea-\u003eea_data[0], SMB2_WSL_XATTR_MODE, SMB2_WSL_XATTR_NAME_LEN + 1);\nfs/smb/client/smb1ops.c:677:\t\t\tdata-\u003ewsl.eas_len += ALIGN(sizeof(*ea) + SMB2_WSL_XATTR_NAME_LEN + 1 +\nfs/smb/client/smb1ops.c:678:\t\t\t\t\t\t SMB2_WSL_XATTR_MODE_SIZE, 4);\nfs/smb/client/smb1ops.c-679-\t\t\trc = 0;\n--\nfs/smb/client/smb1ops.c-713-\nfs/smb/client/smb1ops.c:714:\t\trc = CIFSSMBQAllEAs(xid, tcon, full_path, SMB2_WSL_XATTR_DEV,\nfs/smb/client/smb1ops.c:715:\t\t\t\t \u0026ea-\u003eea_data[SMB2_WSL_XATTR_NAME_LEN + 1],\nfs/smb/client/smb1ops.c:716:\t\t\t\t SMB2_WSL_XATTR_DEV_SIZE, cifs_sb);\nfs/smb/client/smb1ops.c:717:\t\tif (rc == SMB2_WSL_XATTR_DEV_SIZE) {\nfs/smb/client/smb1ops.c-718-\t\t\tea-\u003enext_entry_offset = cpu_to_le32(0);\nfs/smb/client/smb1ops.c-719-\t\t\tea-\u003eflags = 0;\nfs/smb/client/smb1ops.c:720:\t\t\tea-\u003eea_name_length = SMB2_WSL_XATTR_NAME_LEN;\nfs/smb/client/smb1ops.c:721:\t\t\tea-\u003eea_value_length = cpu_to_le16(SMB2_WSL_XATTR_DEV_SIZE);\nfs/smb/client/smb1ops.c:722:\t\t\tmemcpy(\u0026ea-\u003eea_data[0], SMB2_WSL_XATTR_DEV, SMB2_WSL_XATTR_NAME_LEN + 1);\nfs/smb/client/smb1ops.c:723:\t\t\tdata-\u003ewsl.eas_len += ALIGN(sizeof(*ea) + SMB2_WSL_XATTR_NAME_LEN + 1 +\nfs/smb/client/smb1ops.c:724:\t\t\t\t\t\t SMB2_WSL_XATTR_DEV_SIZE, 4);\nfs/smb/client/smb1ops.c-725-\t\t\trc = 0;\n--\nfs/smb/client/smb2inode.c=94=struct wsl_query_ea {\n--\nfs/smb/client/smb2inode.c-96-\t__u8\tname_len;\nfs/smb/client/smb2inode.c:97:\t__u8\tname[SMB2_WSL_XATTR_NAME_LEN + 1];\nfs/smb/client/smb2inode.c-98-} __packed;\n--\nfs/smb/client/smb2inode.c=102=static const struct wsl_query_ea wsl_query_eas[] = {\nfs/smb/client/smb2inode.c:103:\t{ .next = NEXT_OFF, .name_len = SMB2_WSL_XATTR_NAME_LEN, .name = SMB2_WSL_XATTR_UID, },\nfs/smb/client/smb2inode.c:104:\t{ .next = NEXT_OFF, .name_len = SMB2_WSL_XATTR_NAME_LEN, .name = SMB2_WSL_XATTR_GID, },\nfs/smb/client/smb2inode.c:105:\t{ .next = NEXT_OFF, .name_len = SMB2_WSL_XATTR_NAME_LEN, .name = SMB2_WSL_XATTR_MODE, },\nfs/smb/client/smb2inode.c:106:\t{ .next = 0, .name_len = SMB2_WSL_XATTR_NAME_LEN, .name = SMB2_WSL_XATTR_DEV, },\nfs/smb/client/smb2inode.c-107-};\n--\nfs/smb/client/smb2inode.c=109=static int check_wsl_eas(struct kvec *rsp_iov)\n--\nfs/smb/client/smb2inode.c-136-\t\tvlen = le16_to_cpu(ea-\u003eea_value_length);\nfs/smb/client/smb2inode.c:137:\t\tif (nlen != SMB2_WSL_XATTR_NAME_LEN ||\nfs/smb/client/smb2inode.c-138-\t\t (u8 *)ea-\u003eea_data + nlen + 1 + vlen \u003e ea_end)\n--\nfs/smb/client/smb2inode.c-142-\t\tcase 4:\nfs/smb/client/smb2inode.c:143:\t\t\tif (strncmp(ea-\u003eea_data, SMB2_WSL_XATTR_UID, nlen) \u0026\u0026\nfs/smb/client/smb2inode.c:144:\t\t\t strncmp(ea-\u003eea_data, SMB2_WSL_XATTR_GID, nlen) \u0026\u0026\nfs/smb/client/smb2inode.c:145:\t\t\t strncmp(ea-\u003eea_data, SMB2_WSL_XATTR_MODE, nlen))\nfs/smb/client/smb2inode.c-146-\t\t\t\treturn -EINVAL;\n--\nfs/smb/client/smb2inode.c-148-\t\tcase 8:\nfs/smb/client/smb2inode.c:149:\t\t\tif (strncmp(ea-\u003eea_data, SMB2_WSL_XATTR_DEV, nlen))\nfs/smb/client/smb2inode.c-150-\t\t\t\treturn -EINVAL;\n--\nfs/smb/client/smb2inode.c-152-\t\tcase 0:\nfs/smb/client/smb2inode.c:153:\t\t\tif (!strncmp(ea-\u003eea_data, SMB2_WSL_XATTR_UID, nlen) ||\nfs/smb/client/smb2inode.c:154:\t\t\t !strncmp(ea-\u003eea_data, SMB2_WSL_XATTR_GID, nlen) ||\nfs/smb/client/smb2inode.c:155:\t\t\t !strncmp(ea-\u003eea_data, SMB2_WSL_XATTR_MODE, nlen) ||\nfs/smb/client/smb2inode.c:156:\t\t\t !strncmp(ea-\u003eea_data, SMB2_WSL_XATTR_DEV, nlen))\nfs/smb/client/smb2inode.c-157-\t\t\t\tbreak;\n--\nfs/smb/client/smb2pdu.h=284=struct smb2_create_ea_ctx {\n--\nfs/smb/client/smb2pdu.h-289-\nfs/smb/client/smb2pdu.h:290:#define SMB2_WSL_XATTR_UID\t\t\"$LXUID\"\nfs/smb/client/smb2pdu.h:291:#define SMB2_WSL_XATTR_GID\t\t\"$LXGID\"\nfs/smb/client/smb2pdu.h:292:#define SMB2_WSL_XATTR_MODE\t\t\"$LXMOD\"\nfs/smb/client/smb2pdu.h:293:#define SMB2_WSL_XATTR_DEV\t\t\"$LXDEV\"\nfs/smb/client/smb2pdu.h:294:#define SMB2_WSL_XATTR_NAME_LEN\t6\nfs/smb/client/smb2pdu.h-295-#define SMB2_WSL_NUM_XATTRS\t\t4\nfs/smb/client/smb2pdu.h-296-\nfs/smb/client/smb2pdu.h:297:#define SMB2_WSL_XATTR_UID_SIZE\t4\nfs/smb/client/smb2pdu.h:298:#define SMB2_WSL_XATTR_GID_SIZE\t4\nfs/smb/client/smb2pdu.h:299:#define SMB2_WSL_XATTR_MODE_SIZE\t4\nfs/smb/client/smb2pdu.h:300:#define SMB2_WSL_XATTR_DEV_SIZE\t8\nfs/smb/client/smb2pdu.h-301-\n--\nfs/smb/client/smb2pdu.h-303-\t(ALIGN((SMB2_WSL_NUM_XATTRS - 1) * \\\nfs/smb/client/smb2pdu.h:304:\t (SMB2_WSL_XATTR_NAME_LEN + 1 + \\\nfs/smb/client/smb2pdu.h-305-\t\tsizeof(struct smb2_file_full_ea_info)), 4) + \\\nfs/smb/client/smb2pdu.h:306:\t SMB2_WSL_XATTR_NAME_LEN + 1 + sizeof(struct smb2_file_full_ea_info))\nfs/smb/client/smb2pdu.h-307-\n--\nfs/smb/client/smb2pdu.h-309-\t(ALIGN(SMB2_WSL_MIN_QUERY_EA_RESP_SIZE + \\\nfs/smb/client/smb2pdu.h:310:\t SMB2_WSL_XATTR_UID_SIZE + \\\nfs/smb/client/smb2pdu.h:311:\t SMB2_WSL_XATTR_GID_SIZE + \\\nfs/smb/client/smb2pdu.h:312:\t SMB2_WSL_XATTR_MODE_SIZE + \\\nfs/smb/client/smb2pdu.h:313:\t SMB2_WSL_XATTR_DEV_SIZE, 4))\nfs/smb/client/smb2pdu.h-314-\n"
} |
| 31/2 | 2026/09/16 16:03 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 37173 output: 20 thoughts: 39 Thoughts: Here's my thinking process: **Tracing the Execution Path** Okay, so I need to understand how `check_wsl_eas` is being utilized. The code indicates it's defined within `smb2inode.c`. That's a good starting point. Now, to truly grasp its role, I need to find all the places in the code where `check_wsl_eas` is actually *called*. I'll need to identify the call sites to see how it fits into the broader SMB2 protocol processing, specifically to understand its interaction with the WSL Extended Attribute (EAS) implementation. Knowing where it's called will provide the necessary context to determine its function within the overall flow. |
| 32/2 | 2026/09/16 16:03 | tool | grepper |
0mArgs:{
"Expression": "check_wsl_eas"
}Results: {
"Output": "fs/smb/client/smb2inode.c=102=static const struct wsl_query_ea wsl_query_eas[] = {\n--\nfs/smb/client/smb2inode.c-108-\nfs/smb/client/smb2inode.c:109:static int check_wsl_eas(struct kvec *rsp_iov)\nfs/smb/client/smb2inode.c-110-{\n--\nfs/smb/client/smb2inode.c=203=static int smb2_compound_op(const unsigned int xid, struct cifs_tcon *tcon,\n--\nfs/smb/client/smb2inode.c-738-\t\t\t\tsize[0] = le32_to_cpu(qi_rsp-\u003eOutputBufferLength);\nfs/smb/client/smb2inode.c:739:\t\t\t\trc = check_wsl_eas(\u0026rsp_iov[i + 1]);\nfs/smb/client/smb2inode.c-740-\t\t\t\tif (!rc) {\n"
} |
| 33/2 | 2026/09/16 16:03 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 37660 output: 35 thoughts: 840 Thoughts: **Determining Focus Symbols for WSL EA Reparse Point Handling in CIFS** Alright, let's break this down. My goal here is to identify the critical symbols to include in `FocusSymbols` for targeted code coverage, specifically around how the CIFS client handles WSL Extended Attributes (EAs) when dealing with reparse points. Okay, so `smb2_compound_op` is the entry point, it queries the WSL EAs. From there, the code flow branches to either `cifs_open_info_to_fattr` or, more relevantly in this case, `cifs_reparse_point_to_fattr`. That's a key function to consider, given it seems to handle the reparse point specific logic. Now, inside `cifs_reparse_point_to_fattr`, we see a switch statement that calls `wsl_to_fattr` for specific reparse point types (LX_SYMLINK, etc.). `wsl_to_fattr` looks like a key function within this particular codepath. The complication is that `wsl_to_fattr` is declared as `static` within `reparse.c`. Static functions are, of course, prime candidates for inlining. The question is, is GCC inlining it into `cifs_reparse_point_to_fattr`? Or, does it have a symbol address that we can directly reference? We'll need to confirm that. `cifs_reparse_point_to_fattr`, on the other hand, is non-static and declared in `reparse.h`, so we have an address for that. And then we have `reparse_mkdev`, `wsl_make_kuid`, and `wsl_make_kgid`, which are static inline functions declared in `reparse.h`. The documentation tells me that static inline functions generally *cannot* be targeted directly in coverage filters because they may not have their own symbol addresses. Instead, I should focus on the caller functions that exercise these inline helpers. Therefore, my initial list for `FocusSymbols` should include: * `cifs_reparse_point_to_fattr` - This function is a clear entry point for the logic we are interested in, and calls into `wsl_to_fattr`. * `wsl_to_fattr` - Needs to be confirmed to not be inlined. If it's not inlined, then it's a good inclusion. Now, the next step is to examine the wider codebase. Are `reparse_mkdev`, `wsl_make_kuid`, or `wsl_make_kgid` called anywhere else? I need to use `grep` to ensure I've captured all the relevant caller functions to achieve meaningful code coverage. |
| 34/2 | 2026/09/16 16:03 | tool | grepper |
0mArgs:{
"Expression": "reparse_mkdev|wsl_make_kuid|wsl_make_kgid"
}Results: {
"Output": "fs/smb/client/reparse.c=1147=static bool wsl_to_fattr(struct cifs_open_info_data *data,\n--\nfs/smb/client/reparse.c-1198-\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_UID))\nfs/smb/client/reparse.c:1199:\t\t\t\tuid = wsl_make_kuid(cifs_sb, v);\nfs/smb/client/reparse.c-1200-\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_GID, nlen)) {\nfs/smb/client/reparse.c-1201-\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_GID))\nfs/smb/client/reparse.c:1202:\t\t\t\tgid = wsl_make_kgid(cifs_sb, v);\nfs/smb/client/reparse.c-1203-\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_MODE, nlen)) {\n--\nfs/smb/client/reparse.c-1208-\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_DEV, nlen)) {\nfs/smb/client/reparse.c:1209:\t\t\trdev = reparse_mkdev(v);\nfs/smb/client/reparse.c-1210-\t\t\thave_xattr_dev = true;\n--\nfs/smb/client/reparse.c=1225=static bool posix_reparse_to_fattr(struct cifs_sb_info *cifs_sb,\n--\nfs/smb/client/reparse.c-1246-\t\tftype = S_IFCHR;\nfs/smb/client/reparse.c:1247:\t\tfattr-\u003ecf_rdev = reparse_mkdev(buf-\u003eDataBuffer);\nfs/smb/client/reparse.c-1248-\t\tbreak;\n--\nfs/smb/client/reparse.c-1254-\t\tftype = S_IFBLK;\nfs/smb/client/reparse.c:1255:\t\tfattr-\u003ecf_rdev = reparse_mkdev(buf-\u003eDataBuffer);\nfs/smb/client/reparse.c-1256-\t\tbreak;\n--\nfs/smb/client/reparse.h-24-\nfs/smb/client/reparse.h:25:static inline dev_t reparse_mkdev(void *ptr)\nfs/smb/client/reparse.h-26-{\n--\nfs/smb/client/reparse.h-31-\nfs/smb/client/reparse.h:32:static inline kuid_t wsl_make_kuid(struct cifs_sb_info *cifs_sb,\nfs/smb/client/reparse.h-33-\t\t\t\t void *ptr)\n--\nfs/smb/client/reparse.h-41-\nfs/smb/client/reparse.h:42:static inline kgid_t wsl_make_kgid(struct cifs_sb_info *cifs_sb,\nfs/smb/client/reparse.h-43-\t\t\t\t void *ptr)\n"
} |
| 35/2 | 2026/09/16 16:03 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 39990 output: 40 thoughts: 74 Thoughts: Here's my summary, as if I were thinking it: **Digging into the Reparse Point Logic** Okay, so I'm tracing down this `reparse_mkdev` function, and it looks like it's a bit more widely used than I initially thought. I see it's also called by `posix_reparse_to_fattr`, which is, in turn, called by `cifs_reparse_point_to_fattr`! That's a bit of a cascade there. Given the context, I want to take a closer look at the `posix_reparse_to_fattr` function. I should check `fs/smb/client/reparse.c` to see how it fits into the broader scheme of things. It's time to dig into the details and understand the dependencies. |
| 36/2 | 2026/09/16 16:04 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/reparse.c",
"FirstLine": 1225,
"LineCount": 70
}Results: {
"Contents": "1225:\tstatic bool posix_reparse_to_fattr(struct cifs_sb_info *cifs_sb,\n1226:\t\t\t\t\t struct cifs_fattr *fattr,\n1227:\t\t\t\t\t struct cifs_open_info_data *data)\n1228:\t{\n1229:\t\tstruct reparse_nfs_data_buffer *buf = (struct reparse_nfs_data_buffer *)data-\u003ereparse.buf;\n1230:\t\tumode_t ftype;\n1231:\t\n1232:\t\tif (buf == NULL)\n1233:\t\t\treturn true;\n1234:\t\n1235:\t\tif (le16_to_cpu(buf-\u003eReparseDataLength) \u003c sizeof(buf-\u003eInodeType)) {\n1236:\t\t\tWARN_ON_ONCE(1);\n1237:\t\t\treturn false;\n1238:\t\t}\n1239:\t\n1240:\t\tswitch (le64_to_cpu(buf-\u003eInodeType)) {\n1241:\t\tcase NFS_SPECFILE_CHR:\n1242:\t\t\tif (le16_to_cpu(buf-\u003eReparseDataLength) != sizeof(buf-\u003eInodeType) + 8) {\n1243:\t\t\t\tWARN_ON_ONCE(1);\n1244:\t\t\t\treturn false;\n1245:\t\t\t}\n1246:\t\t\tftype = S_IFCHR;\n1247:\t\t\tfattr-\u003ecf_rdev = reparse_mkdev(buf-\u003eDataBuffer);\n1248:\t\t\tbreak;\n1249:\t\tcase NFS_SPECFILE_BLK:\n1250:\t\t\tif (le16_to_cpu(buf-\u003eReparseDataLength) != sizeof(buf-\u003eInodeType) + 8) {\n1251:\t\t\t\tWARN_ON_ONCE(1);\n1252:\t\t\t\treturn false;\n1253:\t\t\t}\n1254:\t\t\tftype = S_IFBLK;\n1255:\t\t\tfattr-\u003ecf_rdev = reparse_mkdev(buf-\u003eDataBuffer);\n1256:\t\t\tbreak;\n1257:\t\tcase NFS_SPECFILE_FIFO:\n1258:\t\t\tftype = S_IFIFO;\n1259:\t\t\tbreak;\n1260:\t\tcase NFS_SPECFILE_SOCK:\n1261:\t\t\tftype = S_IFSOCK;\n1262:\t\t\tbreak;\n1263:\t\tcase NFS_SPECFILE_LNK:\n1264:\t\t\tftype = S_IFLNK;\n1265:\t\t\tbreak;\n1266:\t\tdefault:\n1267:\t\t\tWARN_ON_ONCE(1);\n1268:\t\t\treturn false;\n1269:\t\t}\n1270:\t\tfattr-\u003ecf_mode = (fattr-\u003ecf_mode \u0026 ~S_IFMT) | ftype;\n1271:\t\treturn true;\n1272:\t}\n1273:\t\n1274:\tbool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb,\n1275:\t\t\t\t\t struct cifs_fattr *fattr,\n1276:\t\t\t\t\t struct cifs_open_info_data *data)\n1277:\t{\n1278:\t\tu32 tag = data-\u003ereparse.tag;\n1279:\t\tbool ok;\n1280:\t\n1281:\t\tswitch (tag) {\n1282:\t\tcase IO_REPARSE_TAG_LX_SYMLINK:\n1283:\t\tcase IO_REPARSE_TAG_LX_FIFO:\n1284:\t\tcase IO_REPARSE_TAG_AF_UNIX:\n1285:\t\tcase IO_REPARSE_TAG_LX_CHR:\n1286:\t\tcase IO_REPARSE_TAG_LX_BLK:\n1287:\t\t\tok = wsl_to_fattr(data, cifs_sb, tag, fattr);\n1288:\t\t\tif (!ok)\n1289:\t\t\t\treturn false;\n1290:\t\t\tbreak;\n1291:\t\tcase IO_REPARSE_TAG_NFS:\n1292:\t\t\tok = posix_reparse_to_fattr(cifs_sb, fattr, data);\n1293:\t\t\tif (!ok)\n1294:\t\t\t\treturn false;\n"
} |
| 37/2 | 2026/09/16 16:04 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 41409 output: 21 thoughts: 582 Thoughts: **Analyzing the Impact of the Code Changes** Okay, so I'm looking at this code and trying to get a handle on what's going on with `reparse_mkdev`. I see that it's called by `wsl_to_fattr` and `posix_reparse_to_fattr`, and both of those, in turn, are called by `cifs_reparse_point_to_fattr`. That last function, `cifs_reparse_point_to_fattr`, is called from `cifs_open_info_to_fattr`, `smb311_posix_info_to_fattr`, and `cifs_fill_common_info`. Got it. Now, considering the `FocusSymbols`, I need to include `cifs_reparse_point_to_fattr`, `wsl_to_fattr`, and `posix_reparse_to_fattr`. Wait, are `wsl_to_fattr` and `posix_reparse_to_fattr` valid entries, even though they're probably static? Yes, they absolutely can be. Static functions that aren't inlined are fair game, and even if inlined, the focus symbols can include the actual function name as it's written. Especially callers that are non-static. Next, I need to figure out the scope of this change. It looks like the main function directly affected is `wsl_to_fattr`, specifically in `fs/smb/client/reparse.c`, along with those inline helpers in `fs/smb/client/reparse.h`: `reparse_mkdev`, `wsl_make_kuid`, and `wsl_make_kgid`. So, my `FocusSymbols` are still: `cifs_reparse_point_to_fattr`, `wsl_to_fattr`, and `posix_reparse_to_fattr`. Time to check the configuration dependencies via `EnableConfigs`. `CONFIG_CIFS` is the obvious one, but what else? Looking in `fs/smb/client/Kconfig`, I see that `CIFS` depends on `INET`. Okay, so `INET` and `CIFS`. But wait, do I also need `CIFS_XATTR` or `CIFS_ALLOW_INSECURE_LEGACY`? Looking at `fs/smb/client/Makefile`, `reparse.o` (where these functions live) is built unconditionally if `CONFIG_CIFS` is enabled. However, for WSL reparse points or the extended attributes, does it need `CIFS_XATTR`? Let's check `fs/smb/client/reparse.c` specifically. Ah, `wsl_set_xattrs`… Now, where is `wsl_set_xattrs` called? I need to follow this down. |
| 38/2 | 2026/09/16 16:04 | tool | grepper |
0mArgs:{
"Expression": "wsl_set_xattrs"
}Results: {
"Output": "fs/smb/client/reparse.c=617=struct wsl_xattr {\n--\nfs/smb/client/reparse.c-623-\nfs/smb/client/reparse.c:624:static int wsl_set_xattrs(struct inode *inode, umode_t _mode,\nfs/smb/client/reparse.c-625-\t\t\t dev_t _dev, struct kvec *iov)\n--\nfs/smb/client/reparse.c=682=static int mknod_wsl(unsigned int xid, struct inode *inode,\n--\nfs/smb/client/reparse.c-699-\nfs/smb/client/reparse.c:700:\trc = wsl_set_xattrs(inode, mode, dev, \u0026xattr_iov);\nfs/smb/client/reparse.c-701-\tif (rc) {\n"
} |
| 39/2 | 2026/09/16 16:04 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 42901 output: 42 thoughts: 99 Thoughts: **My Deep Dive into `mknod_wsl` and CIFS XATTRs** Okay, so I'm digging into this `mknod_wsl` function. My initial understanding was that it *didn't* depend on `CONFIG_CIFS_XATTR`. The WSL extended attributes, as I recall, are really just these internal SMB protocol Extended Attributes that get sent during the create/mknod process. But something's niggling at me... Hang on a minute! I need to be sure. Let's re-examine that `cifssmb.c` code; it's right there: ```c #ifndef CONFIG_CIFS_XATTR if (xattr_iov) ``` Huh. That `if` statement… if `CONFIG_CIFS_XATTR` *isn't* defined, *then* it checks `xattr_iov`. That seems a bit contradictory at first glance. I need to get a better handle on this, so I need to check around line 3144 of `cifssmb.c`. There has to be a reason why that conditional exists. I have to see what exactly is going on with that `xattr_iov` variable and what other assumptions it makes. I suspect it's crucial to understand how WSL handles the extended attributes. |
| 40/2 | 2026/09/16 16:05 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/cifssmb.c",
"FirstLine": 3140,
"LineCount": 30
}Results: {
"Contents": "3140:\t\t */\n3141:\t\tif (!CIFS_REPARSE_SUPPORT(tcon))\n3142:\t\t\treturn ERR_PTR(-EOPNOTSUPP);\n3143:\t\n3144:\t#ifndef CONFIG_CIFS_XATTR\n3145:\t\tif (xattr_iov)\n3146:\t\t\treturn ERR_PTR(-EOPNOTSUPP);\n3147:\t#endif\n3148:\t\n3149:\t\toparms = CIFS_OPARMS(cifs_sb, tcon, full_path,\n3150:\t\t\t\t FILE_READ_ATTRIBUTES | FILE_WRITE_DATA | FILE_WRITE_EA,\n3151:\t\t\t\t FILE_CREATE,\n3152:\t\t\t\t (directory ? CREATE_NOT_FILE : CREATE_NOT_DIR) | OPEN_REPARSE_POINT,\n3153:\t\t\t\t ACL_NO_MODE);\n3154:\t\toparms.fid = \u0026fid;\n3155:\t\n3156:\t\trc = CIFS_open(xid, \u0026oparms, \u0026oplock, NULL);\n3157:\t\tif (rc)\n3158:\t\t\treturn ERR_PTR(rc);\n3159:\t\n3160:\t#ifdef CONFIG_CIFS_XATTR\n3161:\t\tif (xattr_iov) {\n3162:\t\t\tstruct smb2_file_full_ea_info *ea;\n3163:\t\n3164:\t\t\tea = \u0026((struct smb2_create_ea_ctx *)xattr_iov-\u003eiov_base)-\u003eea;\n3165:\t\t\twhile (1) {\n3166:\t\t\t\trc = CIFSSMBSetEA(xid,\n3167:\t\t\t\t\t\t tcon,\n3168:\t\t\t\t\t\t full_path,\n3169:\t\t\t\t\t\t \u0026ea-\u003eea_data[0],\n"
} |
| 41/2 | 2026/09/16 16:05 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 43818 output: 206 thoughts: 556 Thoughts: **My Assessment of the CIFS XAttr Patch** Okay, so looking at this code snippet, it's pretty clear that `#ifdef CONFIG_CIFS_XATTR` is the key. The conditional logic means `CONFIG_CIFS_XATTR` is essential for handling or even *setting* WSL extended attributes. And since `CONFIG_CIFS` depends on `CONFIG_INET`, it's all interconnected. So, enabling `INET`, `CIFS`, and `CIFS_XATTR` seems like a solid starting point for any tests related to this patch. Now, let's break this down systematically. Is it worth fuzzing? Absolutely, without a doubt. The patch isn't just cosmetic; it's modifying core logic within `wsl_to_fattr`, effectively making it safer. Specifically, it defers attribute updates in `wsl_to_fattr` until *after* validation, preventing partial updates on failures. That's a classic fuzzing target: any change to error handling is gold. Plus, the use of `get_unaligned_le32` and `get_unaligned_le64` is a big deal. They are now using unaligned access helpers instead of direct pointer dereferencing on byte streams in network filesystem buffers. This makes the code less prone to subtle alignment issues and should improve its reliability. This code lives in `fs/smb/client/reparse.c` and `reparse.h`, which is executable kernel code and this is all reachable through the network via CIFS operations. As for the specific functions of interest, the relevant symbols are: `cifs_reparse_point_to_fattr`, `wsl_to_fattr`, and `posix_reparse_to_fattr`. These are the functions where the changes are focused and thus should be the main fuzzing targets. In short, my recommended configurations are: `CIFS`, `INET`, and `CIFS_XATTR`. The reasoning is straightforward. This patch refactors `wsl_to_fattr()` to prevent mutations of `struct cifs_fattr` until all checks are passed and updates all uses of direct pointer dereferences with `get_unaligned_le32()` and `get_unaligned_le64()`. This impacts `reparse_mkdev()`, `wsl_make_kuid()`, `wsl_make_kgid()`, and `wsl_to_fattr()`. All this code sits within the SMB/CIFS network filesystem client (`fs/smb/client/reparse.c`) and is reachable via standard network filesystem operations in virtualized environments. That makes it a high-value fuzzing target. Time to call `set-results`. Let's get this fuzzing! |
| 42/2 | 2026/09/16 16:05 | tool | set-results |
0mArgs:{
"EnableConfigs": [
"CIFS",
"INET",
"CIFS_XATTR"
],
"FocusSymbols": [
"cifs_reparse_point_to_fattr",
"wsl_to_fattr",
"posix_reparse_to_fattr"
],
"Reasoning": "The patch modifies fs/smb/client/reparse.c and reparse.h by restructuring wsl_to_fattr() to avoid partially mutating struct cifs_fattr when attribute validation fails mid-execution (such as mismatched reparse tag vs WSL mode or missing device major/minor numbers). It also replaces potentially unaligned pointer dereferences with get_unaligned_le32() and get_unaligned_le64(). These changes affect executable code paths handling WSL and POSIX reparse point resolution in the CIFS client, which is reachable in virtualized environments.",
"WorthFuzzing": true
}Results: {
"EnableConfigs": [
"CIFS",
"INET",
"CIFS_XATTR"
],
"FocusSymbols": [
"cifs_reparse_point_to_fattr",
"wsl_to_fattr",
"posix_reparse_to_fattr"
],
"Reasoning": "The patch modifies fs/smb/client/reparse.c and reparse.h by restructuring wsl_to_fattr() to avoid partially mutating struct cifs_fattr when attribute validation fails mid-execution (such as mismatched reparse tag vs WSL mode or missing device major/minor numbers). It also replaces potentially unaligned pointer dereferences with get_unaligned_le32() and get_unaligned_le64(). These changes affect executable code paths handling WSL and POSIX reparse point resolution in the CIFS client, which is reachable in virtualized environments.",
"WorthFuzzing": true
} |
| 43/1 | 2026/09/16 16:05 | action | If |
2mArgs:{
"WorthFuzzing": true
}Results: null |
| 44/2 | 2026/09/16 16:05 | agent | kmsan-evaluator |
2mModel:core Args: null Results: {
"KMSANReasoning": "The patch addresses unaligned accesses when parsing WSL extended attributes by replacing direct pointer dereferences with get_unaligned_le32() and get_unaligned_le64(), and prevents partial updates to 'fattr' on failure paths by staging values in local variables (uid, gid, mode, rdev).\n\nAll newly introduced local variables (uid, gid, mode, rdev) are explicitly initialized at declaration. No uninitialized memory is read, used in branching, or copied to user space. Any potential memory access bugs in EA buffer parsing (such as out-of-bounds reads) are covered by KASAN/UBSAN rather than KMSAN. Thus, dedicated KMSAN fuzzing is not required.",
"NeedsKMSAN": false
}Instruction: You are an expert Linux kernel security engineer specializing in kernel memory
error detectors (KASAN and KMSAN). Your job is to review the provided patch series and
determine if the code changes justify spawning a dedicated KMSAN (KernelMemorySanitizer)
fuzzing session in addition to standard KASAN fuzzing.
CRITICAL DISTINCTION BETWEEN KASAN AND KMSAN:
- Standard KASAN kernel builds (upstream-apparmor-kasan.config) already enable
a comprehensive suite of debugging tools and sanitizers, including KASAN
(out-of-bounds accesses, use-after-free, double free, invalid free), LOCKDEP
(locking bugs and deadlocks), UB-sanitizers, and memory corruption checks.
- KMSAN (KernelMemorySanitizer) detects reads of UNINITIALIZED memory (stack, heap,
or page allocations) and kernel-to-user memory info-leaks.
Rule: THERE IS NO SENSE IN RUNNING A KMSAN SESSION IF A BUG CAN BE CAUGHT BY KASAN,
LOCKDEP, OR OTHER STANDARD BUG DETECTORS.
A dedicated KMSAN fuzzing session incurs significant resource costs. You must ONLY
set NeedsKMSAN=true if the code changes introduce or expose UNINITIALIZED MEMORY risks
that are detected ONLY by KMSAN.
Look holistically at the patch series and surrounding code. Even if no direct
uninitialized field accesses or new buffer allocations are added in the diff itself,
a patch may alter control flow, bounds checking, or data length calculations in ways
that change how the rest of the code operates on existing buffers (e.g. allowing
uninitialized stack/heap memory to be read, copied to user space, or used in control
flow). Do not hesitate to use your code access tools to inspect the surrounding code,
called functions, and callers.
Set NeedsKMSAN=true ONLY IF the patch introduces or modifies:
1. Kernel structures sent to user space (via copy_to_user, put_user, netlink skb
attributes, ioctl output arguments, socket options, or BPF buffers) where fields
or structure padding might not be fully initialized/zeroed.
2. Conditional logic or branching that depends on potentially uninitialized variables
or struct fields.
3. Allocation or initialization of complex data structures where uninitialized fields
could be read later in reachable code paths.
4. Bounds checks, lengths, or logic in a way that allows surrounding code to access
uninitialized bytes of existing buffers.
Set NeedsKMSAN=false IF:
- The code changes primarily risk out-of-bounds access, array overflows, NULL pointer
dereferences, locking deadlocks, or use-after-free bugs (these are already caught
by KASAN, LOCKDEP, or standard bug detectors).
- All stack/heap structures touched or introduced by the patch are fully zeroed
or initialized (e.g. using = {0}, memset, kzalloc) before being read or copied.
- The patch does not introduce any risk of uninitialized memory usage or info-leaks.
Use your code access tools to inspect the surrounding code if necessary, then provide
detailed KMSANReasoning contrasting KASAN vs KMSAN applicability for this patch.
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Target architecture: amd64
For your convenience, here is the diff of the changes:
commit b1eb87f4aa24354e7918d60b0780f5e34101b041
Author: syz-cluster <triage@syzkaller.com>
Date: Wed Sep 16 16:00:06 2026 +0000
syz-cluster: applied patch under review
diff --git a/fs/smb/client/reparse.c b/fs/smb/client/reparse.c
index 9e31fce7e0a52..3a27773186ae4 100644
--- a/fs/smb/client/reparse.c
+++ b/fs/smb/client/reparse.c
@@ -1149,29 +1149,30 @@ static bool wsl_to_fattr(struct cifs_open_info_data *data,
u32 tag, struct cifs_fattr *fattr)
{
unsigned int sbflags = cifs_sb_flags(cifs_sb);
+ kuid_t uid = cifs_sb->ctx->linux_uid;
+ kgid_t gid = cifs_sb->ctx->linux_gid;
struct smb2_file_full_ea_info *ea;
bool have_xattr_dev = false;
+ dev_t rdev = 0;
+ umode_t mode;
u32 next = 0;
- fattr->cf_uid = cifs_sb->ctx->linux_uid;
- fattr->cf_gid = cifs_sb->ctx->linux_gid;
-
- fattr->cf_mode &= ~S_IFMT;
+ mode = fattr->cf_mode & ~S_IFMT;
switch (tag) {
case IO_REPARSE_TAG_LX_SYMLINK:
- fattr->cf_mode |= S_IFLNK;
+ mode |= S_IFLNK;
break;
case IO_REPARSE_TAG_LX_FIFO:
- fattr->cf_mode |= S_IFIFO;
+ mode |= S_IFIFO;
break;
case IO_REPARSE_TAG_AF_UNIX:
- fattr->cf_mode |= S_IFSOCK;
+ mode |= S_IFSOCK;
break;
case IO_REPARSE_TAG_LX_CHR:
- fattr->cf_mode |= S_IFCHR;
+ mode |= S_IFCHR;
break;
case IO_REPARSE_TAG_LX_BLK:
- fattr->cf_mode |= S_IFBLK;
+ mode |= S_IFBLK;
break;
}
@@ -1195,26 +1196,29 @@ static bool wsl_to_fattr(struct cifs_open_info_data *data,
if (!strncmp(name, SMB2_WSL_XATTR_UID, nlen)) {
if (!(sbflags & CIFS_MOUNT_OVERR_UID))
- fattr->cf_uid = wsl_make_kuid(cifs_sb, v);
+ uid = wsl_make_kuid(cifs_sb, v);
} else if (!strncmp(name, SMB2_WSL_XATTR_GID, nlen)) {
if (!(sbflags & CIFS_MOUNT_OVERR_GID))
- fattr->cf_gid = wsl_make_kgid(cifs_sb, v);
+ gid = wsl_make_kgid(cifs_sb, v);
} else if (!strncmp(name, SMB2_WSL_XATTR_MODE, nlen)) {
/* File type in reparse point tag and in xattr mode must match. */
- if (S_DT(fattr->cf_mode) != S_DT(le32_to_cpu(*(__le32 *)v)))
+ if (S_DT(mode) != S_DT(get_unaligned_le32(v)))
return false;
- fattr->cf_mode = (umode_t)le32_to_cpu(*(__le32 *)v);
+ mode = get_unaligned_le32(v);
} else if (!strncmp(name, SMB2_WSL_XATTR_DEV, nlen)) {
- fattr->cf_rdev = reparse_mkdev(v);
+ rdev = reparse_mkdev(v);
have_xattr_dev = true;
}
} while (next);
out:
-
/* Major and minor numbers for char and block devices are mandatory. */
if (!have_xattr_dev && (tag == IO_REPARSE_TAG_LX_CHR || tag == IO_REPARSE_TAG_LX_BLK))
return false;
+ fattr->cf_uid = uid;
+ fattr->cf_gid = gid;
+ fattr->cf_mode = mode;
+ fattr->cf_rdev = rdev;
return true;
}
diff --git a/fs/smb/client/reparse.h b/fs/smb/client/reparse.h
index 49efd85b1e949..05b2cecb44954 100644
--- a/fs/smb/client/reparse.h
+++ b/fs/smb/client/reparse.h
@@ -9,6 +9,7 @@
#include <linux/fs.h>
#include <linux/stat.h>
#include <linux/uidgid.h>
+#include <linux/unaligned.h>
#include "fs_context.h"
#include "cifsglob.h"
#include "../common/smbfsctl.h"
@@ -23,7 +24,7 @@
static inline dev_t reparse_mkdev(void *ptr)
{
- u64 v = le64_to_cpu(*(__le64 *)ptr);
+ u64 v = get_unaligned_le64(ptr);
return MKDEV(v & 0xffffffff, v >> 32);
}
@@ -31,7 +32,7 @@ static inline dev_t reparse_mkdev(void *ptr)
static inline kuid_t wsl_make_kuid(struct cifs_sb_info *cifs_sb,
void *ptr)
{
- u32 uid = le32_to_cpu(*(__le32 *)ptr);
+ u32 uid = get_unaligned_le32(ptr);
if (cifs_sb_flags(cifs_sb) & CIFS_MOUNT_OVERR_UID)
return cifs_sb->ctx->linux_uid;
@@ -41,7 +42,7 @@ static inline kuid_t wsl_make_kuid(struct cifs_sb_info *cifs_sb,
static inline kgid_t wsl_make_kgid(struct cifs_sb_info *cifs_sb,
void *ptr)
{
- u32 gid = le32_to_cpu(*(__le32 *)ptr);
+ u32 gid = get_unaligned_le32(ptr);
if (cifs_sb_flags(cifs_sb) & CIFS_MOUNT_OVERR_GID)
return cifs_sb->ctx->linux_gid;
|
| 45/3 | 2026/09/16 16:05 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 3674 output: 41 thoughts: 77 Thoughts: Here's my analysis of the situation: **Initial Assessment of the Code Patch** Okay, let's dive into this patch. My immediate focus is the affected files: `fs/smb/client/reparse.c` and `fs/smb/client/reparse.h`. Since these are SMB client reparse-related files, I anticipate the patch likely involves changes to how the client handles symbolic links, reparse points, or perhaps even junction points on the server side. Knowing this area, I'll need to pay close attention to the implications of these changes in the wider context of SMB client interactions. I will also be looking for any potential security implications, as reparse handling is often a vector for exploits. To get a better handle on the specific modification, my first step will be to examine the context of the change within `fs/smb/client/reparse.c`. Specifically, I will be looking closely at around line 1149. The use of `read-file` tool will give me the needed immediate context to quickly understand the impact of the patch. |
| 46/3 | 2026/09/16 16:06 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/reparse.c",
"FirstLine": 1140,
"LineCount": 100
}Results: {
"Contents": "1140:\t{\n1141:\t\tstruct smb2_ioctl_rsp *io = rsp_iov-\u003eiov_base;\n1142:\t\t*plen = le32_to_cpu(io-\u003eOutputCount);\n1143:\t\treturn (struct reparse_data_buffer *)((u8 *)io +\n1144:\t\t\t\t\t\t le32_to_cpu(io-\u003eOutputOffset));\n1145:\t}\n1146:\t\n1147:\tstatic bool wsl_to_fattr(struct cifs_open_info_data *data,\n1148:\t\t\t\t struct cifs_sb_info *cifs_sb,\n1149:\t\t\t\t u32 tag, struct cifs_fattr *fattr)\n1150:\t{\n1151:\t\tunsigned int sbflags = cifs_sb_flags(cifs_sb);\n1152:\t\tkuid_t uid = cifs_sb-\u003ectx-\u003elinux_uid;\n1153:\t\tkgid_t gid = cifs_sb-\u003ectx-\u003elinux_gid;\n1154:\t\tstruct smb2_file_full_ea_info *ea;\n1155:\t\tbool have_xattr_dev = false;\n1156:\t\tdev_t rdev = 0;\n1157:\t\tumode_t mode;\n1158:\t\tu32 next = 0;\n1159:\t\n1160:\t\tmode = fattr-\u003ecf_mode \u0026 ~S_IFMT;\n1161:\t\tswitch (tag) {\n1162:\t\tcase IO_REPARSE_TAG_LX_SYMLINK:\n1163:\t\t\tmode |= S_IFLNK;\n1164:\t\t\tbreak;\n1165:\t\tcase IO_REPARSE_TAG_LX_FIFO:\n1166:\t\t\tmode |= S_IFIFO;\n1167:\t\t\tbreak;\n1168:\t\tcase IO_REPARSE_TAG_AF_UNIX:\n1169:\t\t\tmode |= S_IFSOCK;\n1170:\t\t\tbreak;\n1171:\t\tcase IO_REPARSE_TAG_LX_CHR:\n1172:\t\t\tmode |= S_IFCHR;\n1173:\t\t\tbreak;\n1174:\t\tcase IO_REPARSE_TAG_LX_BLK:\n1175:\t\t\tmode |= S_IFBLK;\n1176:\t\t\tbreak;\n1177:\t\t}\n1178:\t\n1179:\t\tif (!data-\u003ewsl.eas_len)\n1180:\t\t\tgoto out;\n1181:\t\n1182:\t\tea = (struct smb2_file_full_ea_info *)data-\u003ewsl.eas;\n1183:\t\tdo {\n1184:\t\t\tconst char *name;\n1185:\t\t\tvoid *v;\n1186:\t\t\tu8 nlen;\n1187:\t\n1188:\t\t\tea = (void *)((u8 *)ea + next);\n1189:\t\t\tnext = le32_to_cpu(ea-\u003enext_entry_offset);\n1190:\t\t\tif (!le16_to_cpu(ea-\u003eea_value_length))\n1191:\t\t\t\tcontinue;\n1192:\t\n1193:\t\t\tname = ea-\u003eea_data;\n1194:\t\t\tnlen = ea-\u003eea_name_length;\n1195:\t\t\tv = (void *)((u8 *)ea-\u003eea_data + ea-\u003eea_name_length + 1);\n1196:\t\n1197:\t\t\tif (!strncmp(name, SMB2_WSL_XATTR_UID, nlen)) {\n1198:\t\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_UID))\n1199:\t\t\t\t\tuid = wsl_make_kuid(cifs_sb, v);\n1200:\t\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_GID, nlen)) {\n1201:\t\t\t\tif (!(sbflags \u0026 CIFS_MOUNT_OVERR_GID))\n1202:\t\t\t\t\tgid = wsl_make_kgid(cifs_sb, v);\n1203:\t\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_MODE, nlen)) {\n1204:\t\t\t\t/* File type in reparse point tag and in xattr mode must match. */\n1205:\t\t\t\tif (S_DT(mode) != S_DT(get_unaligned_le32(v)))\n1206:\t\t\t\t\treturn false;\n1207:\t\t\t\tmode = get_unaligned_le32(v);\n1208:\t\t\t} else if (!strncmp(name, SMB2_WSL_XATTR_DEV, nlen)) {\n1209:\t\t\t\trdev = reparse_mkdev(v);\n1210:\t\t\t\thave_xattr_dev = true;\n1211:\t\t\t}\n1212:\t\t} while (next);\n1213:\tout:\n1214:\t\t/* Major and minor numbers for char and block devices are mandatory. */\n1215:\t\tif (!have_xattr_dev \u0026\u0026 (tag == IO_REPARSE_TAG_LX_CHR || tag == IO_REPARSE_TAG_LX_BLK))\n1216:\t\t\treturn false;\n1217:\t\n1218:\t\tfattr-\u003ecf_uid = uid;\n1219:\t\tfattr-\u003ecf_gid = gid;\n1220:\t\tfattr-\u003ecf_mode = mode;\n1221:\t\tfattr-\u003ecf_rdev = rdev;\n1222:\t\treturn true;\n1223:\t}\n1224:\t\n1225:\tstatic bool posix_reparse_to_fattr(struct cifs_sb_info *cifs_sb,\n1226:\t\t\t\t\t struct cifs_fattr *fattr,\n1227:\t\t\t\t\t struct cifs_open_info_data *data)\n1228:\t{\n1229:\t\tstruct reparse_nfs_data_buffer *buf = (struct reparse_nfs_data_buffer *)data-\u003ereparse.buf;\n1230:\t\tumode_t ftype;\n1231:\t\n1232:\t\tif (buf == NULL)\n1233:\t\t\treturn true;\n1234:\t\n1235:\t\tif (le16_to_cpu(buf-\u003eReparseDataLength) \u003c sizeof(buf-\u003eInodeType)) {\n1236:\t\t\tWARN_ON_ONCE(1);\n1237:\t\t\treturn false;\n1238:\t\t}\n1239:\t\n"
} |
| 47/3 | 2026/09/16 16:06 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 5712 output: 33 thoughts: 36 Thoughts: Okay, here's my interpretation of those thoughts, tailored for an expert audience: **Investigating the `wsl_to_fattr` Callers and Context** Alright, I'm thinking I need to understand this `wsl_to_fattr` function better. Where is it being called from? I need to trace its usage. The goal is to see how the WSL (Windows Subsystem for Linux) interaction is being processed. I want to understand the data flow, especially related to file attributes. Likely there will be related functions in that same file and so I want to read more of `fs/smb/client/reparse.c` around `wsl_to_fattr`. That should help provide the context I need. This may give me insight into a bug report, or a performance issue, or possibly an incompatibility. Let me dig into the surrounding code and see what I can find. |
| 48/3 | 2026/09/16 16:06 | tool | grepper |
0mArgs:{
"Expression": "wsl_to_fattr",
"PathPrefix": "fs/smb/client"
}Results: {
"Output": "fs/smb/client/reparse.c=1138=struct reparse_data_buffer *smb2_get_reparse_point_buffer(const struct kvec *rsp_iov,\n--\nfs/smb/client/reparse.c-1146-\nfs/smb/client/reparse.c:1147:static bool wsl_to_fattr(struct cifs_open_info_data *data,\nfs/smb/client/reparse.c-1148-\t\t\t struct cifs_sb_info *cifs_sb,\n--\nfs/smb/client/reparse.c=1274=bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb,\n--\nfs/smb/client/reparse.c-1286-\tcase IO_REPARSE_TAG_LX_BLK:\nfs/smb/client/reparse.c:1287:\t\tok = wsl_to_fattr(data, cifs_sb, tag, fattr);\nfs/smb/client/reparse.c-1288-\t\tif (!ok)\n--\nfs/smb/client/smb1ops.c=532=static int cifs_query_path_info(const unsigned int xid,\n--\nfs/smb/client/smb1ops.c-686-\t\t\t * of EA $LXMOD failed. It is needed only for\nfs/smb/client/smb1ops.c:687:\t\t\t * non-symlink WSL reparse points and wsl_to_fattr()\nfs/smb/client/smb1ops.c-688-\t\t\t * handle the case when EA is missing.\n--\nfs/smb/client/smb1ops.c-732-\t\t\t * of EA $LXDEV failed. It is needed only for\nfs/smb/client/smb1ops.c:733:\t\t\t * WSL CHR and BLK reparse points and wsl_to_fattr()\nfs/smb/client/smb1ops.c-734-\t\t\t * handle the case when EA is missing.\n"
} |
| 49/3 | 2026/09/16 16:06 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 6513 output: 40 thoughts: 569 Thoughts: **Analyzing the SMB Client Reparse Point Code** Okay, let's dive into this commit and see what's changed in `fs/smb/client/reparse.c`. I'm seeing a refactoring related to how reparse point data is converted into a `cifs_fattr` structure. The old code had this issue: if `wsl_to_fattr` failed, the `fattr` struct might have been partially modified *before* the failure, leading to potential data corruption or inconsistencies. Looking closer, the initial code had this pattern: the `cf_uid`, `cf_gid`, and mode of the `fattr` struct were getting assigned *before* the potentially failing checks. Specifically, within the `wsl_to_fattr` function, the code directly modified `fattr->cf_uid` and `fattr->cf_gid` without checking the outcome of subsequent operations. Also, there was this unaligned access `le32_to_cpu(*(__le32 *)v)` which could lead to problems. The commit addresses this by making the assignment of `cf_uid`, `cf_gid`, `cf_mode` and `cf_rdev` conditional. The new code does things differently: local variables `uid`, `gid`, `mode`, and `rdev` are used to store intermediate values, and these are only assigned to `fattr` *after* all checks have succeeded. This prevents a partially modified `fattr` struct from persisting if an error occurs. Moreover, the commit replaces the direct, potentially unaligned, dereferences with `get_unaligned_le32` and `get_unaligned_le64`, which is the correct and portable way to handle unaligned memory accesses. Now, I'll need to check the caller, `cifs_reparse_point_to_fattr`, to fully understand the impact of this change and ensure the behavior remains correct. |
| 50/3 | 2026/09/16 16:06 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/reparse.c",
"FirstLine": 1270,
"LineCount": 40
}Results: {
"Contents": "1270:\t\tfattr-\u003ecf_mode = (fattr-\u003ecf_mode \u0026 ~S_IFMT) | ftype;\n1271:\t\treturn true;\n1272:\t}\n1273:\t\n1274:\tbool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb,\n1275:\t\t\t\t\t struct cifs_fattr *fattr,\n1276:\t\t\t\t\t struct cifs_open_info_data *data)\n1277:\t{\n1278:\t\tu32 tag = data-\u003ereparse.tag;\n1279:\t\tbool ok;\n1280:\t\n1281:\t\tswitch (tag) {\n1282:\t\tcase IO_REPARSE_TAG_LX_SYMLINK:\n1283:\t\tcase IO_REPARSE_TAG_LX_FIFO:\n1284:\t\tcase IO_REPARSE_TAG_AF_UNIX:\n1285:\t\tcase IO_REPARSE_TAG_LX_CHR:\n1286:\t\tcase IO_REPARSE_TAG_LX_BLK:\n1287:\t\t\tok = wsl_to_fattr(data, cifs_sb, tag, fattr);\n1288:\t\t\tif (!ok)\n1289:\t\t\t\treturn false;\n1290:\t\t\tbreak;\n1291:\t\tcase IO_REPARSE_TAG_NFS:\n1292:\t\t\tok = posix_reparse_to_fattr(cifs_sb, fattr, data);\n1293:\t\t\tif (!ok)\n1294:\t\t\t\treturn false;\n1295:\t\t\tbreak;\n1296:\t\tcase 0: /* SMB1 symlink */\n1297:\t\tcase IO_REPARSE_TAG_SYMLINK:\n1298:\t\t\tfattr-\u003ecf_mode \u0026= ~S_IFMT;\n1299:\t\t\tfattr-\u003ecf_mode |= S_IFLNK;\n1300:\t\t\tbreak;\n1301:\t\tdefault:\n1302:\t\t\tif (!(fattr-\u003ecf_cifsattrs \u0026 ATTR_DIRECTORY))\n1303:\t\t\t\treturn false;\n1304:\t\t\tif (!IS_REPARSE_TAG_NAME_SURROGATE(tag) \u0026\u0026\n1305:\t\t\t tag != IO_REPARSE_TAG_INTERNAL)\n1306:\t\t\t\treturn false;\n1307:\t\t\t/* See cifs_create_junction_fattr() */\n1308:\t\t\tfattr-\u003ecf_mode = S_IFDIR | 0711;\n1309:\t\t\tbreak;\n"
} |
| 51/3 | 2026/09/16 16:06 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 8206 output: 38 thoughts: 22 Thoughts: Here's my thought process, distilled: **Digging into `cifs_fattr`** Okay, so I need to understand the lifecycle and origin of `cifs_fattr`. That variable keeps popping up, and it's time to get a grip on where it comes from and how it's initialized. I need to trace its declaration and assignment. Let's see how the kernel uses this. Essentially, I want to map out its declaration and initialization. This will help with debugging later. |
| 52/3 | 2026/09/16 16:06 | tool | grepper |
0mArgs:{
"Expression": "cifs_reparse_point_to_fattr",
"PathPrefix": "fs/smb/client"
}Results: {
"Output": "fs/smb/client/inode.c=847=static void smb311_posix_info_to_fattr(struct cifs_fattr *fattr,\n--\nfs/smb/client/inode.c-886-\tif (cifs_open_data_reparse(data) \u0026\u0026\nfs/smb/client/inode.c:887:\t cifs_reparse_point_to_fattr(cifs_sb, fattr, data))\nfs/smb/client/inode.c-888-\t\tgoto out_reparse;\n--\nfs/smb/client/inode.c=910=static void cifs_open_info_to_fattr(struct cifs_fattr *fattr,\n--\nfs/smb/client/inode.c-946-\tif (cifs_open_data_reparse(data) \u0026\u0026\nfs/smb/client/inode.c:947:\t cifs_reparse_point_to_fattr(cifs_sb, fattr, data))\nfs/smb/client/inode.c-948-\t\tgoto out_reparse;\n--\nfs/smb/client/readdir.c=175=cifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb)\n--\nfs/smb/client/readdir.c-193-\tif ((fattr-\u003ecf_cifsattrs \u0026 ATTR_REPARSE_POINT) \u0026\u0026\nfs/smb/client/readdir.c:194:\t cifs_reparse_point_to_fattr(cifs_sb, fattr, \u0026data))\nfs/smb/client/readdir.c-195-\t\tgoto out_reparse;\n--\nfs/smb/client/reparse.c=1225=static bool posix_reparse_to_fattr(struct cifs_sb_info *cifs_sb,\n--\nfs/smb/client/reparse.c-1273-\nfs/smb/client/reparse.c:1274:bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb,\nfs/smb/client/reparse.c-1275-\t\t\t\t struct cifs_fattr *fattr,\n--\nfs/smb/client/reparse.h=110=static inline bool cifs_open_data_reparse(struct cifs_open_info_data *data)\n--\nfs/smb/client/reparse.h-133-\nfs/smb/client/reparse.h:134:bool cifs_reparse_point_to_fattr(struct cifs_sb_info *cifs_sb,\nfs/smb/client/reparse.h-135-\t\t\t\t struct cifs_fattr *fattr,\n"
} |
| 53/3 | 2026/09/16 16:06 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 9097 output: 38 thoughts: 32 Thoughts: Here's my take on those thoughts: **Analyzing `cifs_open_info_to_fattr` and Callers** Alright, let's dive into this. The task is to understand the flow of information between `cifs_open_info_to_fattr` and its calling functions within the `fs/smb/client/inode.c` context. I need to refresh my understanding of how SMB file attribute mappings are handled during the open process. This likely involves how CIFS client code translates the information it receives during an open request into a format suitable for the local filesystem's attribute representation. I'll need to see how the open info structure is populated and how the final `fattr` (file attribute) structure is constructed. I'm expecting to find insights into attribute caching, permission translation, and potentially some of the interaction between the CIFS transport layer and the local VFS. Let's see how efficiently these attribute conversions are performed and if there are any potential bottlenecks I could optimize. This will be an interesting deep dive. |
| 54/3 | 2026/09/16 16:07 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/inode.c",
"FirstLine": 910,
"LineCount": 45
}Results: {
"Contents": " 910:\tstatic void cifs_open_info_to_fattr(struct cifs_fattr *fattr,\n 911:\t\t\t\t\t struct cifs_open_info_data *data,\n 912:\t\t\t\t\t struct super_block *sb)\n 913:\t{\n 914:\t\tstruct smb2_file_all_info *info = \u0026data-\u003efi;\n 915:\t\tstruct cifs_sb_info *cifs_sb = CIFS_SB(sb);\n 916:\t\tstruct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb);\n 917:\t\n 918:\t\tmemset(fattr, 0, sizeof(*fattr));\n 919:\t\tif (data-\u003eunknown_nlink)\n 920:\t\t\tfattr-\u003ecf_flags |= CIFS_FATTR_UNKNOWN_NLINK;\n 921:\t\tfattr-\u003ecf_cifsattrs = le32_to_cpu(info-\u003eAttributes);\n 922:\t\tif (info-\u003eDeletePending)\n 923:\t\t\tfattr-\u003ecf_flags |= CIFS_FATTR_DELETE_PENDING;\n 924:\t\n 925:\t\tif (info-\u003eLastAccessTime)\n 926:\t\t\tfattr-\u003ecf_atime = cifs_NTtimeToUnix(info-\u003eLastAccessTime);\n 927:\t\telse\n 928:\t\t\tktime_get_coarse_real_ts64(\u0026fattr-\u003ecf_atime);\n 929:\t\n 930:\t\tfattr-\u003ecf_ctime = cifs_NTtimeToUnix(info-\u003eChangeTime);\n 931:\t\tfattr-\u003ecf_mtime = cifs_NTtimeToUnix(info-\u003eLastWriteTime);\n 932:\t\n 933:\t\tif (data-\u003eadjust_tz) {\n 934:\t\t\tfattr-\u003ecf_ctime.tv_sec += tcon-\u003eses-\u003eserver-\u003etimeAdj;\n 935:\t\t\tfattr-\u003ecf_mtime.tv_sec += tcon-\u003eses-\u003eserver-\u003etimeAdj;\n 936:\t\t}\n 937:\t\n 938:\t\tfattr-\u003ecf_eof = le64_to_cpu(info-\u003eEndOfFile);\n 939:\t\tfattr-\u003ecf_bytes = le64_to_cpu(info-\u003eAllocationSize);\n 940:\t\tfattr-\u003ecf_createtime = le64_to_cpu(info-\u003eCreationTime);\n 941:\t\tfattr-\u003ecf_nlink = le32_to_cpu(info-\u003eNumberOfLinks);\n 942:\t\tfattr-\u003ecf_uid = cifs_sb-\u003ectx-\u003elinux_uid;\n 943:\t\tfattr-\u003ecf_gid = cifs_sb-\u003ectx-\u003elinux_gid;\n 944:\t\n 945:\t\tfattr-\u003ecf_mode = cifs_sb-\u003ectx-\u003efile_mode;\n 946:\t\tif (cifs_open_data_reparse(data) \u0026\u0026\n 947:\t\t cifs_reparse_point_to_fattr(cifs_sb, fattr, data))\n 948:\t\t\tgoto out_reparse;\n 949:\t\n 950:\t\tif (fattr-\u003ecf_cifsattrs \u0026 ATTR_DIRECTORY) {\n 951:\t\t\tfattr-\u003ecf_mode = S_IFDIR | cifs_sb-\u003ectx-\u003edir_mode;\n 952:\t\t\tfattr-\u003ecf_dtype = DT_DIR;\n 953:\t\t\t/*\n 954:\t\t\t * Server can return wrong NumberOfLinks value for directories\n"
} |
| 55/3 | 2026/09/16 16:07 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 10305 output: 38 thoughts: 54 Thoughts: **Analyzing File Attribute Initialization** Okay, here's what I'm thinking as I'm going through this code. That `memset` call on line 918, `memset(fattr, 0, sizeof(*fattr));`, immediately catches my eye. It's a classic initialization pattern for a structure, setting all the members to zero. That's good, predictable behavior. But it's also a bit... blunt. I wonder if there are more nuanced ways to initialize this `fattr` struct depending on context? Then my thoughts turn to `smb311_posix_info_to_fattr`. That function's name is interesting. I'll need to double check that function and lines 847 and beyond to find out what are the specific considerations in that part of the code. Is that responsible for *populating* the `fattr` structure? Is there any overlap between the functions or conflicts? The relationship between that memset call and how the contents of `fattr` are populated is critical here. I'm going to jump to that section right away and see what's going on. |
| 56/3 | 2026/09/16 16:07 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/inode.c",
"FirstLine": 847,
"LineCount": 45
}Results: {
"Contents": " 847:\tstatic void smb311_posix_info_to_fattr(struct cifs_fattr *fattr,\n 848:\t\t\t\t\t struct cifs_open_info_data *data,\n 849:\t\t\t\t\t struct super_block *sb)\n 850:\t{\n 851:\t\tstruct smb311_posix_qinfo *info = \u0026data-\u003eposix_fi;\n 852:\t\tstruct cifs_sb_info *cifs_sb = CIFS_SB(sb);\n 853:\t\tstruct cifs_tcon *tcon = cifs_sb_master_tcon(cifs_sb);\n 854:\t\tunsigned int sbflags = cifs_sb_flags(cifs_sb);\n 855:\t\n 856:\t\tmemset(fattr, 0, sizeof(*fattr));\n 857:\t\n 858:\t\t/* no fattr-\u003eflags to set */\n 859:\t\tfattr-\u003ecf_cifsattrs = le32_to_cpu(info-\u003eDosAttributes);\n 860:\t\tfattr-\u003ecf_uniqueid = le64_to_cpu(info-\u003eInode);\n 861:\t\n 862:\t\tif (info-\u003eLastAccessTime)\n 863:\t\t\tfattr-\u003ecf_atime = cifs_NTtimeToUnix(info-\u003eLastAccessTime);\n 864:\t\telse\n 865:\t\t\tktime_get_coarse_real_ts64(\u0026fattr-\u003ecf_atime);\n 866:\t\n 867:\t\tfattr-\u003ecf_ctime = cifs_NTtimeToUnix(info-\u003eChangeTime);\n 868:\t\tfattr-\u003ecf_mtime = cifs_NTtimeToUnix(info-\u003eLastWriteTime);\n 869:\t\n 870:\t\tif (data-\u003eadjust_tz) {\n 871:\t\t\tfattr-\u003ecf_ctime.tv_sec += tcon-\u003eses-\u003eserver-\u003etimeAdj;\n 872:\t\t\tfattr-\u003ecf_mtime.tv_sec += tcon-\u003eses-\u003eserver-\u003etimeAdj;\n 873:\t\t}\n 874:\t\n 875:\t\t/*\n 876:\t\t * The srv fs device id is overridden on network mount so setting\n 877:\t\t * @fattr-\u003ecf_rdev isn't needed here.\n 878:\t\t */\n 879:\t\tfattr-\u003ecf_eof = le64_to_cpu(info-\u003eEndOfFile);\n 880:\t\tfattr-\u003ecf_bytes = le64_to_cpu(info-\u003eAllocationSize);\n 881:\t\tfattr-\u003ecf_createtime = le64_to_cpu(info-\u003eCreationTime);\n 882:\t\tfattr-\u003ecf_nlink = le32_to_cpu(info-\u003eHardLinks);\n 883:\t\tfattr-\u003ecf_mode = wire_mode_to_posix(le32_to_cpu(info-\u003eMode),\n 884:\t\t\t\t\t\t fattr-\u003ecf_cifsattrs \u0026 ATTR_DIRECTORY);\n 885:\t\n 886:\t\tif (cifs_open_data_reparse(data) \u0026\u0026\n 887:\t\t cifs_reparse_point_to_fattr(cifs_sb, fattr, data))\n 888:\t\t\tgoto out_reparse;\n 889:\t\n 890:\t\tfattr-\u003ecf_dtype = S_DT(fattr-\u003ecf_mode);\n 891:\t\n"
} |
| 57/3 | 2026/09/16 16:07 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 11534 output: 38 thoughts: 27 Thoughts: Okay, here's my take on those thoughts, framed as an expert's internal monologue: **Investigating `cifs_fill_common_info` in `fs/smb/client/readdir.c`** Alright, let's see, that function, `cifs_fill_common_info`... that's in `fs/smb/client/readdir.c`, and immediately I'm thinking about the implications for directory listing operations over CIFS. Specifically, it's the function responsible for populating the `dirent` structure, the core data passed back to the kernel and, ultimately, to the application performing the `readdir` call. So, I'm immediately wondering about the efficiency of its data population. What fields are being populated within this function? Are there any redundant lookups or conversions? Is it carefully handling the different SMB dialects and their associated quirks in how they report directory entry information? Any potential race conditions when accessing shared structures? Are there any locking issues, especially given that it’s likely running in a potentially highly concurrent context? I’m thinking about performance implications, especially for large directories or over slower network connections. I'm mentally running through potential pitfalls: could this be a bottleneck for CIFS performance? Are there areas for optimization, perhaps by caching information or deferring certain calculations until absolutely necessary? Is error handling robust enough to gracefully handle unexpected responses from the server? I'm also considering the potential security implications. Are there any opportunities for information leakage or denial-of-service vulnerabilities if the server provides maliciously crafted directory entry data? I also need to verify it handles all the edge cases correctly; especially the unusual, non-RFC compliant shares. Ultimately, I'm going to want to dig into the code itself, trace the execution path, and understand precisely how this function interacts with the rest of the CIFS client code. I'll need to look at its use of data structures, its interactions with the SMB protocol, and its handling of error conditions to gain a proper understanding. A quick `git blame` could be informative, too. |
| 58/3 | 2026/09/16 16:07 | tool | read-file |
0mArgs:{
"File": "fs/smb/client/readdir.c",
"FirstLine": 175,
"LineCount": 35
}Results: {
"Contents": " 175:\tcifs_fill_common_info(struct cifs_fattr *fattr, struct cifs_sb_info *cifs_sb)\n 176:\t{\n 177:\t\tstruct cifs_open_info_data data = {\n 178:\t\t\t.reparse = { .tag = fattr-\u003ecf_cifstag, },\n 179:\t\t};\n 180:\t\tunsigned int sbflags;\n 181:\t\n 182:\t\tfattr-\u003ecf_uid = cifs_sb-\u003ectx-\u003elinux_uid;\n 183:\t\tfattr-\u003ecf_gid = cifs_sb-\u003ectx-\u003elinux_gid;\n 184:\t\n 185:\t\t/*\n 186:\t\t * The IO_REPARSE_TAG_LX_ tags originally were used by WSL but they\n 187:\t\t * are preferred by the Linux client in some cases since, unlike\n 188:\t\t * the NFS reparse tag (or EAs), they don't require an extra query\n 189:\t\t * to determine which type of special file they represent.\n 190:\t\t * TODO: go through all documented reparse tags to see if we can\n 191:\t\t * reasonably map some of them to directories vs. files vs. symlinks\n 192:\t\t */\n 193:\t\tif ((fattr-\u003ecf_cifsattrs \u0026 ATTR_REPARSE_POINT) \u0026\u0026\n 194:\t\t cifs_reparse_point_to_fattr(cifs_sb, fattr, \u0026data))\n 195:\t\t\tgoto out_reparse;\n 196:\t\n 197:\t\tif (fattr-\u003ecf_cifsattrs \u0026 ATTR_DIRECTORY) {\n 198:\t\t\tfattr-\u003ecf_mode = S_IFDIR | cifs_sb-\u003ectx-\u003edir_mode;\n 199:\t\t\tfattr-\u003ecf_dtype = DT_DIR;\n 200:\t\t} else {\n 201:\t\t\tfattr-\u003ecf_mode = S_IFREG | cifs_sb-\u003ectx-\u003efile_mode;\n 202:\t\t\tfattr-\u003ecf_dtype = DT_REG;\n 203:\t\t}\n 204:\t\n 205:\tout_reparse:\n 206:\t\t/* non-unix readdir doesn't provide nlink */\n 207:\t\tfattr-\u003ecf_flags |= CIFS_FATTR_UNKNOWN_NLINK;\n 208:\t\n 209:\t\tif (fattr-\u003ecf_cifsattrs \u0026 ATTR_READONLY)\n"
} |
| 59/3 | 2026/09/16 16:07 | llm | kmsan-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 12688 output: 174 thoughts: 2138 Thoughts: **Analysis of CIFS Patch for Unaligned Access and Atomic Attribute Updates** Okay, so looking at this patch, my initial thought is that it addresses a potential robustness issue, likely related to how the CIFS driver interacts with WSL extended attributes. Specifically, I see changes involving `get_unaligned_le64` and `get_unaligned_le32` in `reparse.h`, suggesting a fix for unaligned memory access. These are replacing direct pointer dereferences of the form `*(__le64 *)ptr` and similar constructs. This immediately raises a flag: unaligned access can lead to undefined behavior, especially on architectures that don't inherently support it or when alignment checks are enabled by tools like UBSAN. We also see changes in how file attributes are constructed in `reparse.c`, specifically around the updates of `fattr`. It seems like these changes aim to ensure a more atomic update process, preventing partially updated attributes in case of errors during parsing. Diving deeper, the code changes in `reparse.c` now introduce local variables `uid`, `gid`, `rdev`, and `mode`. These are initialized locally before being assigned to `fattr` at the end of the function. This is a very clear pattern for providing atomicity. Previously, `fattr` fields were modified directly as the code iterated through the extended attributes, leaving it in a potentially inconsistent state if an error occurred. This is a good practice, and avoids a potential source of subtle bugs. Now, my primary concern is to ensure that this patch doesn't introduce *new* risks, especially uninitialized memory reads or leaks. Looking at the initialization of `uid`, `gid`, `rdev`, and `mode`, I see that they are initialized correctly. `uid` and `gid` get their values from `cifs_sb->ctx->linux_uid` and `cifs_sb->ctx->linux_gid`, and `rdev` is initialized to zero. The mode variable is initialized to a mask of the original mode, ensuring all bits are initialized. The `get_unaligned_le*` helpers are standard and correct for this purpose. I see no direct uninitialized memory issues. The code validates that when certain reparse tags are present, that a device number also exists. The patch itself fixes unaligned pointer dereferences, using standard unaligned access functions, as well as providing safer transactional updates of the fattr struct. KASAN/UBSAN or standard bug detectors (such as those for locking or use-after-free conditions) will cover the out-of-bounds accesses and data race issues. Thus, KMSAN is not needed because it doesn't address the primary risks of uninitialized memory usage or information leaks, the issues addressed are memory alignment or bounds-related issues that are handled by KASAN/UBSAN. It seems like the patch's purpose is to improve the driver's robustness and to make the attribute update process more atomic, not to expose new risks that require KMSAN. The logic is sound, initialization is handled, and the code clearly mitigates the issue it intended to fix. Thus `NeedsKMSAN = false`. |
| 60/3 | 2026/09/16 16:08 | tool | set-results |
0mArgs:{
"KMSANReasoning": "The patch addresses unaligned accesses when parsing WSL extended attributes by replacing direct pointer dereferences with get_unaligned_le32() and get_unaligned_le64(), and prevents partial updates to 'fattr' on failure paths by staging values in local variables (uid, gid, mode, rdev).\n\nAll newly introduced local variables (uid, gid, mode, rdev) are explicitly initialized at declaration. No uninitialized memory is read, used in branching, or copied to user space. Any potential memory access bugs in EA buffer parsing (such as out-of-bounds reads) are covered by KASAN/UBSAN rather than KMSAN. Thus, dedicated KMSAN fuzzing is not required.",
"NeedsKMSAN": false
}Results: {
"KMSANReasoning": "The patch addresses unaligned accesses when parsing WSL extended attributes by replacing direct pointer dereferences with get_unaligned_le32() and get_unaligned_le64(), and prevents partial updates to 'fattr' on failure paths by staging values in local variables (uid, gid, mode, rdev).\n\nAll newly introduced local variables (uid, gid, mode, rdev) are explicitly initialized at declaration. No uninitialized memory is read, used in branching, or copied to user space. Any potential memory access bugs in EA buffer parsing (such as out-of-bounds reads) are covered by KASAN/UBSAN rather than KMSAN. Thus, dedicated KMSAN fuzzing is not required.",
"NeedsKMSAN": false
} |
| Total Calls | Total Tokens | Avg Tokens | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|
| Total Calls | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|