AI Trajectory


Trajectory: (Expand/Collapse All)
Seq Timestamp Type Name Duration
0/0 2026/09/23 20:32 flow patch-triage
0m Args:
null

Results:
{
  "EnableConfigs": null,
  "FocusSymbols": [],
  "KMSANReasoning": "",
  "NeedsKMSAN": false,
  "Reasoning": "The patch adds earlyprintk support for Intel TDX guests using TDVMCALL hypercalls. The modified code resides in the x86 decompressor, early boot __init parameter setup, and TDX-specific hypercall routines. All modified executable code is structurally unreachable during fuzzing because it either executes exclusively during early boot before userspace starts or requires Intel TDX hardware support (X86_FEATURE_TDX_GUEST) which is not available in standard virtualized fuzzing environments.",
  "WorthFuzzing": false
}

1/1 2026/09/23 20:32 action read-patch-diff
0m Args:
null

Results:
{
  "PatchDiff": "commit 648b5a6091bb633dfa37365b0bf5e2d92db97dd4\nAuthor: syz-cluster \u003ctriage@syzkaller.com\u003e\nDate:   Wed Sep 23 20:32:02 2026 +0000\n\n    syz-cluster: applied patch under review\n\ndiff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt\nindex 33cd30996e47e..263a806afd2a3 100644\n--- a/Documentation/admin-guide/kernel-parameters.txt\n+++ b/Documentation/admin-guide/kernel-parameters.txt\n@@ -1543,6 +1543,7 @@ Kernel parameters\n \t\t\tearlyprintk=serial[,ttySn[,baudrate]]\n \t\t\tearlyprintk=serial[,0x...[,baudrate]]\n \t\t\tearlyprintk=ttySn[,baudrate]\n+\t\t\tearlyprintk=tdx[,ttySn[,baudrate]]\n \t\t\tearlyprintk=dbgp[debugController#]\n \t\t\tearlyprintk=mmio32,membase[,{nocfg|baudrate}]\n \t\t\tearlyprintk=pciserial[,force],bus:device.function[,{nocfg|baudrate}]\n@@ -1556,6 +1557,14 @@ Kernel parameters\n \t\t\tUse \"nocfg\" to skip UART configuration, assume\n \t\t\tBIOS/firmware has configured UART correctly.\n \n+\t\t\tOn x86, \"tdx\" is equivalent to \"serial\", except that\n+\t\t\tin a TDX guest the serial port is driven with\n+\t\t\tTDVMCALLs rather than port I/O instructions, avoiding\n+\t\t\tthe #VE exception that would otherwise be taken to\n+\t\t\temulate every access. Outside a TDX guest it falls\n+\t\t\tback to port I/O and behaves exactly like \"serial\".\n+\t\t\tIf CONFIG_INTEL_TDX_GUEST is not set, it is ignored.\n+\n \t\t\tAppend \",keep\" to not disable it when the real console\n \t\t\ttakes over.\n \ndiff --git a/arch/x86/boot/compressed/tdx.c b/arch/x86/boot/compressed/tdx.c\nindex 8451d6a1030c6..ed278bac3c939 100644\n--- a/arch/x86/boot/compressed/tdx.c\n+++ b/arch/x86/boot/compressed/tdx.c\n@@ -22,7 +22,7 @@ static inline unsigned int tdx_io_in(int size, u16 port)\n \t\t.r10 = TDX_HYPERCALL_STANDARD,\n \t\t.r11 = hcall_func(EXIT_REASON_IO_INSTRUCTION),\n \t\t.r12 = size,\n-\t\t.r13 = 0,\n+\t\t.r13 = TDVMCALL_PORT_READ,\n \t\t.r14 = port,\n \t};\n \n@@ -38,7 +38,7 @@ static inline void tdx_io_out(int size, u16 port, u32 value)\n \t\t.r10 = TDX_HYPERCALL_STANDARD,\n \t\t.r11 = hcall_func(EXIT_REASON_IO_INSTRUCTION),\n \t\t.r12 = size,\n-\t\t.r13 = 1,\n+\t\t.r13 = TDVMCALL_PORT_WRITE,\n \t\t.r14 = port,\n \t\t.r15 = value,\n \t};\ndiff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c\nindex f904a636d449b..4377fcca2c99c 100644\n--- a/arch/x86/coco/tdx/tdx.c\n+++ b/arch/x86/coco/tdx/tdx.c\n@@ -24,10 +24,6 @@\n #define EPT_READ\t0\n #define EPT_WRITE\t1\n \n-/* Port I/O direction */\n-#define PORT_READ\t0\n-#define PORT_WRITE\t1\n-\n /* See Exit Qualification for I/O Instructions in VMX documentation */\n #define VE_IS_IO_IN(e)\t\t((e) \u0026 BIT(3))\n #define VE_GET_IO_SIZE(e)\t(((e) \u0026 GENMASK(2, 0)) + 1)\n@@ -198,6 +194,45 @@ u64 tdx_hcall_get_quote(u8 *buf, size_t size)\n }\n EXPORT_SYMBOL_GPL(tdx_hcall_get_quote);\n \n+/**\n+ * tdx_inb() - Read a byte from an I/O port without a #VE\n+ * @port: I/O port to read from\n+ *\n+ * Ask the VMM to perform the read with TDG.VP.VMCALL\u003cInstruction.IO\u003e, rather\n+ * than executing an IN instruction and having the resulting #VE emulate it.\n+ *\n+ * Return: the byte read, or 0xff if the hypercall failed.\n+ */\n+u8 tdx_inb(u16 port)\n+{\n+\tstruct tdx_module_args args = {\n+\t\t.r10 = TDX_HYPERCALL_STANDARD,\n+\t\t.r11 = hcall_func(EXIT_REASON_IO_INSTRUCTION),\n+\t\t.r12 = 1,\n+\t\t.r13 = TDVMCALL_PORT_READ,\n+\t\t.r14 = port,\n+\t};\n+\n+\tif (__tdx_hypercall(\u0026args))\n+\t\treturn 0xff;\n+\n+\treturn args.r11;\n+}\n+\n+/**\n+ * tdx_outb() - Write a byte to an I/O port without a #VE\n+ * @value: byte to write\n+ * @port: I/O port to write to\n+ *\n+ * Ask the VMM to perform the write with TDG.VP.VMCALL\u003cInstruction.IO\u003e, rather\n+ * than executing an OUT instruction and having the resulting #VE emulate it.\n+ */\n+void tdx_outb(u8 value, u16 port)\n+{\n+\t_tdx_hypercall(hcall_func(EXIT_REASON_IO_INSTRUCTION), 1,\n+\t\t       TDVMCALL_PORT_WRITE, port, value);\n+}\n+\n static void __noreturn tdx_panic(const char *msg)\n {\n \tstruct tdx_module_args args = {\n@@ -691,7 +726,7 @@ static bool handle_in(struct pt_regs *regs, int size, int port)\n \t\t.r10 = TDX_HYPERCALL_STANDARD,\n \t\t.r11 = hcall_func(EXIT_REASON_IO_INSTRUCTION),\n \t\t.r12 = size,\n-\t\t.r13 = PORT_READ,\n+\t\t.r13 = TDVMCALL_PORT_READ,\n \t\t.r14 = port,\n \t};\n \tbool success;\n@@ -720,7 +755,7 @@ static bool handle_out(struct pt_regs *regs, int size, int port)\n \t * \"TDG.VP.VMCALL\u003cInstruction.IO\u003e\".\n \t */\n \treturn !_tdx_hypercall(hcall_func(EXIT_REASON_IO_INSTRUCTION), size,\n-\t\t\t       PORT_WRITE, port, regs-\u003eax \u0026 mask);\n+\t\t\t       TDVMCALL_PORT_WRITE, port, regs-\u003eax \u0026 mask);\n }\n \n /*\ndiff --git a/arch/x86/include/asm/shared/tdx.h b/arch/x86/include/asm/shared/tdx.h\nindex f20e91d7ac35b..ecaf965f059b7 100644\n--- a/arch/x86/include/asm/shared/tdx.h\n+++ b/arch/x86/include/asm/shared/tdx.h\n@@ -84,6 +84,12 @@\n #define TDVMCALL_STATUS_ALIGN_ERROR\t0x8000000000000002ULL\n #define TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED\t0x8000000000000003ULL\n \n+/*\n+ * TDG.VP.VMCALL\u003cInstruction.IO\u003e direction (passed in R13)\n+ */\n+#define TDVMCALL_PORT_READ\t\t0\n+#define TDVMCALL_PORT_WRITE\t\t1\n+\n /*\n  * Bitmasks of exposed registers (with VMM).\n  */\ndiff --git a/arch/x86/include/asm/tdx.h b/arch/x86/include/asm/tdx.h\nindex 89e97d5761d89..325dd7c5929f0 100644\n--- a/arch/x86/include/asm/tdx.h\n+++ b/arch/x86/include/asm/tdx.h\n@@ -83,6 +83,9 @@ int tdx_mcall_extend_rtmr(u8 index, u8 *data);\n \n u64 tdx_hcall_get_quote(u8 *buf, size_t size);\n \n+u8 tdx_inb(u16 port);\n+void tdx_outb(u8 value, u16 port);\n+\n void __init tdx_dump_attributes(u64 td_attr);\n void __init tdx_dump_td_ctls(u64 td_ctls);\n \ndiff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c\nindex cba75306e5b62..2721e48783cdf 100644\n--- a/arch/x86/kernel/early_printk.c\n+++ b/arch/x86/kernel/early_printk.c\n@@ -21,6 +21,7 @@\n #include \u003clinux/usb/xhci-dbgp.h\u003e\n #include \u003casm/pci_x86.h\u003e\n #include \u003clinux/static_call.h\u003e\n+#include \u003casm/tdx.h\u003e\n \n /* Simple VGA output */\n #define VGABASE\t\t(__ISA_IO_base + 0xb8000)\n@@ -111,6 +112,32 @@ ANNOTATE_NOENDBR_SYM(io_serial_out);\n DEFINE_STATIC_CALL(serial_in, io_serial_in);\n DEFINE_STATIC_CALL(serial_out, io_serial_out);\n \n+#ifdef CONFIG_INTEL_TDX_GUEST\n+/*\n+ * A TDX guest cannot execute port I/O instructions, so ask the VMM to do it.\n+ */\n+static __noendbr unsigned int tdx_serial_in(unsigned long addr, int offset)\n+{\n+\treturn tdx_inb(addr + offset);\n+}\n+ANNOTATE_NOENDBR_SYM(tdx_serial_in);\n+\n+static __noendbr void tdx_serial_out(unsigned long addr, int offset, int value)\n+{\n+\ttdx_outb(value, addr + offset);\n+}\n+ANNOTATE_NOENDBR_SYM(tdx_serial_out);\n+\n+static __init void early_serial_tdx_init(void)\n+{\n+\tif (!cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\n+\t\treturn;\n+\n+\tstatic_call_update(serial_in, tdx_serial_in);\n+\tstatic_call_update(serial_out, tdx_serial_out);\n+}\n+#endif /* CONFIG_INTEL_TDX_GUEST */\n+\n static int early_serial_putc(unsigned char ch)\n {\n \tunsigned timeout = 0xffff;\n@@ -414,6 +441,16 @@ static int __init setup_early_printk(char *buf)\n \t\t\tearly_serial_init(buf + 4);\n \t\t\tearly_console_register(\u0026early_serial_console, keep);\n \t\t}\n+#ifdef CONFIG_INTEL_TDX_GUEST\n+\t\tif (!strncmp(buf, \"tdx\", 3)) {\n+\t\t\tbuf += 3;\n+\t\t\tearly_serial_tdx_init();\n+\t\t\tearly_serial_init(buf);\n+\t\t\tearly_console_register(\u0026early_serial_console, keep);\n+\t\t\tif (!strncmp(buf, \",ttyS\", 5))\n+\t\t\t\tbuf += 5;\n+\t\t}\n+#endif\n #ifdef CONFIG_PCI\n \t\tif (!strncmp(buf, \"pciserial\", 9)) {\n \t\t\tbuf += 9; /* Keep from match the above \"pciserial\" */\n"
}

2/1 2026/09/23 20:32 agent patch-evaluator
0m Model:
core

Args:
null

Results:
{
  "EnableConfigs": null,
  "FocusSymbols": [],
  "Reasoning": "The patch adds earlyprintk support for Intel TDX guests using TDVMCALL hypercalls. The modified code resides in the x86 decompressor, early boot __init parameter setup, and TDX-specific hypercall routines. All modified executable code is structurally unreachable during fuzzing because it either executes exclusively during early boot before userspace starts or requires Intel TDX hardware support (X86_FEATURE_TDX_GUEST) which is not available in standard virtualized fuzzing environments.",
  "WorthFuzzing": false
}

Instruction:
You are an expert Linux kernel maintainer and security engineer.
Your job is to review a provided patch series and evaluate whether it warrants fuzzing with syzkaller.

IMPORTANT: The changes have ALREADY been applied and committed as the HEAD commit in
your workspace. Do NOT rely on internal assumptions. You must actively use your code access
tools to inspect the actual source code, callers, and surrounding context.

================================================================================
1. CORE TRIAGE PHILOSOPHY
================================================================================
The goal of patch fuzzing is to discover crashes, regressions, exposed latent bugs,
and newly triggered assertions introduced by the patch series.

- REACHABILITY IS THE PRIMARY GATE:
  Fuzzing can only discover bugs in code that can actually execute in standard virtualized
  environments (GCE or QEMU, utilizing software-emulated devices like USB gadgets, netdev, tun/tap).
  If the modified code is structurally unreachable (see Section 2), it MUST NOT be fuzzed,
  regardless of whether it adds assertions or complex logic.

- DO NOT BLINDLY TRUST "NO FUNCTIONAL CHANGE" (NFCI) OR "REFACTORING" CLAIMS:
  Patch authors routinely label changes as "cleanups", "refactorings", or state
  "No functional change intended". Do NOT take these claims at face value.
  Code refactorings that rearrange logic, introduce helper functions, or alter state management
  in core subsystems frequently introduce subtle semantic shifts or uncover latent kernel bugs.
  If reachable executable code is modified or refactored, it MUST be fuzzed.

- NEW OR MODIFIED ASSERTIONS IN REACHABLE CODE MUST BE FUZZED:
  When a patch introduces or modifies runtime checks or assertions (e.g., WARN_ON*, VM_WARN_ON*,
  BUG_ON*, lockdep_assert*) in reachable code paths, it enforces new or stricter invariants.
  Even if the author believes the invariant always holds, fuzzing is essential to verify whether
  an unusual sequence of operations can violate it.

================================================================================
2. WHEN TO RETURN WorthFuzzing=false (NEGATIVE CRITERIA)
================================================================================
Return WorthFuzzing=false ONLY IF all modified code falls strictly into one or more of these categories:

- Non-kernel and non-executable changes:
  * Modifications to Documentation/, comments, or spelling fixes.
  * User-space directories, self-tests, samples, or scripts (e.g., tools/, samples/, scripts/, usr/)
    that do not affect the compiled kernel image (vmlinux) or kernel modules.
  * Purely decorative logging (e.g., message strings in pr_err, printk, dev_info) or tracepoints
    that do not alter control flow or data structures.
  * Build system or Kconfig changes that do not alter compiled C logic.
- Structurally unreachable hardware:
  * Vendor-specific PCIe switches, SmartNICs, or GPU drivers (e.g., mlxsw, pds_core, qed,
    ionic, amdgpu) requiring physical ASIC/PCIe cards not emulated in standard QEMU.
- Unreachable execution paths:
  * Driver teardown callbacks (.remove, .shutdown, pci_unregister_driver) executed only during
    physical PCI hot-unplug or manual sysfs driver unbinding.
  * Code paths exclusive to architectures other than the target architecture.

================================================================================
3. WHEN TO RETURN WorthFuzzing=true (POSITIVE CRITERIA)
================================================================================
Return WorthFuzzing=true whenever the patch touches reachable executable code, including:
- Core Subsystems:
  * Any logic modifications in memory management (mm/), synchronization/locking (kernel/locking/),
    BPF, scheduler, core networking, VFS, or syscall handling.
- Refactorings and Code Cleanups:
  * Any restructuring of reachable data structures, helper abstractions, or algorithm flows.
- Runtime Assertions and Defensive Checks:
  * Any introduction or alteration of assertions (WARN_ON*, VM_WARN_ON*, BUG_ON*, etc.) in reachable paths.
- Reachable Drivers and Protocols:
  * Drivers accessible via virtual buses (virtio, USB gadget, loopback, netlink, binder, sockets, etc.).

================================================================================
4. EXTRACTING FocusSymbols (PREVENTING DILUTION)
================================================================================
When WorthFuzzing=true, you must extract specific kernel functions into FocusSymbols to guide the fuzzer:

- AVOID UBIQUITOUS LIFECYCLE HOT-PATHS:
  Do NOT list generic, ubiquitous functions called by almost every program in the corpus
  (including, but not limited to: general memory allocators and deallocators, page fault
  and trap handlers, or core synchronization primitives; this is not an exhaustive list).
  Listing ubiquitous functions causes the fuzzer to classify thousands of unrelated tests as "focused",
  which severely dilutes fuzzing effort away from the actual changes.

- TARGET SPECIFIC FEATURE LOGIC AND ENTRYPOINTS:
  List functions that specifically implement the logic being added or altered, or direct API entrypoints
  for the subsystem feature under review.

- HANDLING STATIC INLINE FUNCTIONS IN HEADERS (.h):
  Compiler-inlined static functions (such as static inlines in mm/*.h or include/linux/*.h) lack
  distinct symbol addresses in vmlinux and cannot be targeted directly by symbol coverage filters.
  If the changes are primarily in static inline helpers, identify non-static, feature-specific caller
  functions in .c files that exercise them (avoiding ubiquitous lifecycle wrappers).

================================================================================
5. IDENTIFYING EnableConfigs
================================================================================
Identify any specific CONFIG_ options required to properly compile and reach the modified code:
- Inspect Kconfig files and #ifdef guards; do not make assumptions.
- Check "depends on" lines in Kconfig to include any non-standard parent subsystem configs needed.
- Strip any 'CONFIG_' prefix (e.g., return "NET_IPV4" instead of "CONFIG_NET_IPV4").
Prefer calling several tools at the same time to save round-trips.


Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.

Prompt:
Target architecture: amd64

For your convenience, here is the diff of the changes:
commit 648b5a6091bb633dfa37365b0bf5e2d92db97dd4
Author: syz-cluster <triage@syzkaller.com>
Date:   Wed Sep 23 20:32:02 2026 +0000

    syz-cluster: applied patch under review

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 33cd30996e47e..263a806afd2a3 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -1543,6 +1543,7 @@ Kernel parameters
 			earlyprintk=serial[,ttySn[,baudrate]]
 			earlyprintk=serial[,0x...[,baudrate]]
 			earlyprintk=ttySn[,baudrate]
+			earlyprintk=tdx[,ttySn[,baudrate]]
 			earlyprintk=dbgp[debugController#]
 			earlyprintk=mmio32,membase[,{nocfg|baudrate}]
 			earlyprintk=pciserial[,force],bus:device.function[,{nocfg|baudrate}]
@@ -1556,6 +1557,14 @@ Kernel parameters
 			Use "nocfg" to skip UART configuration, assume
 			BIOS/firmware has configured UART correctly.
 
+			On x86, "tdx" is equivalent to "serial", except that
+			in a TDX guest the serial port is driven with
+			TDVMCALLs rather than port I/O instructions, avoiding
+			the #VE exception that would otherwise be taken to
+			emulate every access. Outside a TDX guest it falls
+			back to port I/O and behaves exactly like "serial".
+			If CONFIG_INTEL_TDX_GUEST is not set, it is ignored.
+
 			Append ",keep" to not disable it when the real console
 			takes over.
 
diff --git a/arch/x86/boot/compressed/tdx.c b/arch/x86/boot/compressed/tdx.c
index 8451d6a1030c6..ed278bac3c939 100644
--- a/arch/x86/boot/compressed/tdx.c
+++ b/arch/x86/boot/compressed/tdx.c
@@ -22,7 +22,7 @@ static inline unsigned int tdx_io_in(int size, u16 port)
 		.r10 = TDX_HYPERCALL_STANDARD,
 		.r11 = hcall_func(EXIT_REASON_IO_INSTRUCTION),
 		.r12 = size,
-		.r13 = 0,
+		.r13 = TDVMCALL_PORT_READ,
 		.r14 = port,
 	};
 
@@ -38,7 +38,7 @@ static inline void tdx_io_out(int size, u16 port, u32 value)
 		.r10 = TDX_HYPERCALL_STANDARD,
 		.r11 = hcall_func(EXIT_REASON_IO_INSTRUCTION),
 		.r12 = size,
-		.r13 = 1,
+		.r13 = TDVMCALL_PORT_WRITE,
 		.r14 = port,
 		.r15 = value,
 	};
diff --git a/arch/x86/coco/tdx/tdx.c b/arch/x86/coco/tdx/tdx.c
index f904a636d449b..4377fcca2c99c 100644
--- a/arch/x86/coco/tdx/tdx.c
+++ b/arch/x86/coco/tdx/tdx.c
@@ -24,10 +24,6 @@
 #define EPT_READ	0
 #define EPT_WRITE	1
 
-/* Port I/O direction */
-#define PORT_READ	0
-#define PORT_WRITE	1
-
 /* See Exit Qualification for I/O Instructions in VMX documentation */
 #define VE_IS_IO_IN(e)		((e) & BIT(3))
 #define VE_GET_IO_SIZE(e)	(((e) & GENMASK(2, 0)) + 1)
@@ -198,6 +194,45 @@ u64 tdx_hcall_get_quote(u8 *buf, size_t size)
 }
 EXPORT_SYMBOL_GPL(tdx_hcall_get_quote);
 
+/**
+ * tdx_inb() - Read a byte from an I/O port without a #VE
+ * @port: I/O port to read from
+ *
+ * Ask the VMM to perform the read with TDG.VP.VMCALL<Instruction.IO>, rather
+ * than executing an IN instruction and having the resulting #VE emulate it.
+ *
+ * Return: the byte read, or 0xff if the hypercall failed.
+ */
+u8 tdx_inb(u16 port)
+{
+	struct tdx_module_args args = {
+		.r10 = TDX_HYPERCALL_STANDARD,
+		.r11 = hcall_func(EXIT_REASON_IO_INSTRUCTION),
+		.r12 = 1,
+		.r13 = TDVMCALL_PORT_READ,
+		.r14 = port,
+	};
+
+	if (__tdx_hypercall(&args))
+		return 0xff;
+
+	return args.r11;
+}
+
+/**
+ * tdx_outb() - Write a byte to an I/O port without a #VE
+ * @value: byte to write
+ * @port: I/O port to write to
+ *
+ * Ask the VMM to perform the write with TDG.VP.VMCALL<Instruction.IO>, rather
+ * than executing an OUT instruction and having the resulting #VE emulate it.
+ */
+void tdx_outb(u8 value, u16 port)
+{
+	_tdx_hypercall(hcall_func(EXIT_REASON_IO_INSTRUCTION), 1,
+		       TDVMCALL_PORT_WRITE, port, value);
+}
+
 static void __noreturn tdx_panic(const char *msg)
 {
 	struct tdx_module_args args = {
@@ -691,7 +726,7 @@ static bool handle_in(struct pt_regs *regs, int size, int port)
 		.r10 = TDX_HYPERCALL_STANDARD,
 		.r11 = hcall_func(EXIT_REASON_IO_INSTRUCTION),
 		.r12 = size,
-		.r13 = PORT_READ,
+		.r13 = TDVMCALL_PORT_READ,
 		.r14 = port,
 	};
 	bool success;
@@ -720,7 +755,7 @@ static bool handle_out(struct pt_regs *regs, int size, int port)
 	 * "TDG.VP.VMCALL<Instruction.IO>".
 	 */
 	return !_tdx_hypercall(hcall_func(EXIT_REASON_IO_INSTRUCTION), size,
-			       PORT_WRITE, port, regs->ax & mask);
+			       TDVMCALL_PORT_WRITE, port, regs->ax & mask);
 }
 
 /*
diff --git a/arch/x86/include/asm/shared/tdx.h b/arch/x86/include/asm/shared/tdx.h
index f20e91d7ac35b..ecaf965f059b7 100644
--- a/arch/x86/include/asm/shared/tdx.h
+++ b/arch/x86/include/asm/shared/tdx.h
@@ -84,6 +84,12 @@
 #define TDVMCALL_STATUS_ALIGN_ERROR	0x8000000000000002ULL
 #define TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED	0x8000000000000003ULL
 
+/*
+ * TDG.VP.VMCALL<Instruction.IO> direction (passed in R13)
+ */
+#define TDVMCALL_PORT_READ		0
+#define TDVMCALL_PORT_WRITE		1
+
 /*
  * Bitmasks of exposed registers (with VMM).
  */
diff --git a/arch/x86/include/asm/tdx.h b/arch/x86/include/asm/tdx.h
index 89e97d5761d89..325dd7c5929f0 100644
--- a/arch/x86/include/asm/tdx.h
+++ b/arch/x86/include/asm/tdx.h
@@ -83,6 +83,9 @@ int tdx_mcall_extend_rtmr(u8 index, u8 *data);
 
 u64 tdx_hcall_get_quote(u8 *buf, size_t size);
 
+u8 tdx_inb(u16 port);
+void tdx_outb(u8 value, u16 port);
+
 void __init tdx_dump_attributes(u64 td_attr);
 void __init tdx_dump_td_ctls(u64 td_ctls);
 
diff --git a/arch/x86/kernel/early_printk.c b/arch/x86/kernel/early_printk.c
index cba75306e5b62..2721e48783cdf 100644
--- a/arch/x86/kernel/early_printk.c
+++ b/arch/x86/kernel/early_printk.c
@@ -21,6 +21,7 @@
 #include <linux/usb/xhci-dbgp.h>
 #include <asm/pci_x86.h>
 #include <linux/static_call.h>
+#include <asm/tdx.h>
 
 /* Simple VGA output */
 #define VGABASE		(__ISA_IO_base + 0xb8000)
@@ -111,6 +112,32 @@ ANNOTATE_NOENDBR_SYM(io_serial_out);
 DEFINE_STATIC_CALL(serial_in, io_serial_in);
 DEFINE_STATIC_CALL(serial_out, io_serial_out);
 
+#ifdef CONFIG_INTEL_TDX_GUEST
+/*
+ * A TDX guest cannot execute port I/O instructions, so ask the VMM to do it.
+ */
+static __noendbr unsigned int tdx_serial_in(unsigned long addr, int offset)
+{
+	return tdx_inb(addr + offset);
+}
+ANNOTATE_NOENDBR_SYM(tdx_serial_in);
+
+static __noendbr void tdx_serial_out(unsigned long addr, int offset, int value)
+{
+	tdx_outb(value, addr + offset);
+}
+ANNOTATE_NOENDBR_SYM(tdx_serial_out);
+
+static __init void early_serial_tdx_init(void)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+		return;
+
+	static_call_update(serial_in, tdx_serial_in);
+	static_call_update(serial_out, tdx_serial_out);
+}
+#endif /* CONFIG_INTEL_TDX_GUEST */
+
 static int early_serial_putc(unsigned char ch)
 {
 	unsigned timeout = 0xffff;
@@ -414,6 +441,16 @@ static int __init setup_early_printk(char *buf)
 			early_serial_init(buf + 4);
 			early_console_register(&early_serial_console, keep);
 		}
+#ifdef CONFIG_INTEL_TDX_GUEST
+		if (!strncmp(buf, "tdx", 3)) {
+			buf += 3;
+			early_serial_tdx_init();
+			early_serial_init(buf);
+			early_console_register(&early_serial_console, keep);
+			if (!strncmp(buf, ",ttyS", 5))
+				buf += 5;
+		}
+#endif
 #ifdef CONFIG_PCI
 		if (!strncmp(buf, "pciserial", 9)) {
 			buf += 9; /* Keep from match the above "pciserial" */

3/2 2026/09/23 20:32 llm patch-evaluator
0m Model:
gemini-3.8-flash

Args:
null

Results:
null

Tokens:
							input: 5782
							output: 22
							thoughts: 619
						

Thoughts:
**Analyzing the TDX Patch Series**

Okay, let's dive into this patch series and the accompanying instructions. First, the diff touches several key areas: `Documentation/admin-guide/kernel-parameters.txt`, `arch/x86/boot/compressed/tdx.c`, `arch/x86/coco/tdx/tdx.c`, a few header files (`arch/x86/include/asm/shared/tdx.h`, `arch/x86/include/asm/tdx.h`), and `arch/x86/kernel/early_printk.c`. This suggests it's a relatively focused modification, but we need to understand the intent.

Looking closer, it seems the core of the change revolves around some port access abstractions within the TDX (Trusted Domain Extensions) environment. Specifically, the patch does the following:

1.  It defines `TDVMCALL_PORT_READ` and `TDVMCALL_PORT_WRITE` in `arch/x86/include/asm/shared/tdx.h`. Okay, standard approach.
2.  In `arch/x86/boot/compressed/tdx.c`, it's replacing direct integer literals (0 and 1) with these newly defined macros. Clean, good.
3.  `arch/x86/coco/tdx/tdx.c` takes it a step further. It removes its own local definitions for similar read/write port macros and universally adopts `TDVMCALL_PORT_READ` and `TDVMCALL_PORT_WRITE`. Also, important, it introduces `tdx_inb` and `tdx_outb` functions. This implies there's now an expectation of using these functions for port I/O within the TDX context.
4.  The corresponding declaration of these new functions is in `arch/x86/include/asm/tdx.h`. Standard stuff.
5.  Finally, and this is where it gets interesting, `arch/x86/kernel/early_printk.c` is updated. It adds `tdx_serial_in`, `tdx_serial_out`, and `early_serial_tdx_init`. The critical part is the integration with `setup_early_printk()`, specifically adding support for the `earlyprintk=tdx...` kernel parameter. Now I'm on alert.

Okay, let's pause and consider the implications of hooking into `early_printk`. `setup_early_printk` is an `early_param` and runs during the very early stages of boot, during command-line parsing, essentially during kernel initialization. Now, my immediate thought is whether syzkaller could be used to fuzz early boot options. However, syzkaller generally runs in a userspace context *after* the kernel has booted, so it can't directly trigger a bug here.

The key question now is can `tdx_inb` and `tdx_outb` be called at runtime? If so, where are they *actually* used beyond the early boot phase? Time to fire up grep and investigate their usages. I need to understand the potential attack surface.



4/2 2026/09/23 20:32 tool grepper
0m Args:
{
  "Expression": "tdx_(in|out)b"
}

Results:
{
  "Output": "arch/x86/boot/compressed/tdx.c=35=static inline void tdx_io_out(int size, u16 port, u32 value)\n--\narch/x86/boot/compressed/tdx.c-48-\narch/x86/boot/compressed/tdx.c:49:static inline u8 tdx_inb(u16 port)\narch/x86/boot/compressed/tdx.c-50-{\n--\narch/x86/boot/compressed/tdx.c-53-\narch/x86/boot/compressed/tdx.c:54:static inline void tdx_outb(u8 value, u16 port)\narch/x86/boot/compressed/tdx.c-55-{\n--\narch/x86/boot/compressed/tdx.c=64=void early_tdx_detect(void)\n--\narch/x86/boot/compressed/tdx.c-73-\t/* Use hypercalls instead of I/O instructions */\narch/x86/boot/compressed/tdx.c:74:\tpio_ops.f_inb  = tdx_inb;\narch/x86/boot/compressed/tdx.c:75:\tpio_ops.f_outb = tdx_outb;\narch/x86/boot/compressed/tdx.c-76-\tpio_ops.f_outw = tdx_outw;\n--\narch/x86/coco/tdx/tdx.c=195=EXPORT_SYMBOL_GPL(tdx_hcall_get_quote);\n--\narch/x86/coco/tdx/tdx.c-197-/**\narch/x86/coco/tdx/tdx.c:198: * tdx_inb() - Read a byte from an I/O port without a #VE\narch/x86/coco/tdx/tdx.c-199- * @port: I/O port to read from\n--\narch/x86/coco/tdx/tdx.c-205- */\narch/x86/coco/tdx/tdx.c:206:u8 tdx_inb(u16 port)\narch/x86/coco/tdx/tdx.c-207-{\n--\narch/x86/coco/tdx/tdx.c-222-/**\narch/x86/coco/tdx/tdx.c:223: * tdx_outb() - Write a byte to an I/O port without a #VE\narch/x86/coco/tdx/tdx.c-224- * @value: byte to write\n--\narch/x86/coco/tdx/tdx.c-229- */\narch/x86/coco/tdx/tdx.c:230:void tdx_outb(u8 value, u16 port)\narch/x86/coco/tdx/tdx.c-231-{\n--\narch/x86/include/asm/tdx.h=84=u64 tdx_hcall_get_quote(u8 *buf, size_t size);\narch/x86/include/asm/tdx.h-85-\narch/x86/include/asm/tdx.h:86:u8 tdx_inb(u16 port);\narch/x86/include/asm/tdx.h:87:void tdx_outb(u8 value, u16 port);\narch/x86/include/asm/tdx.h-88-\n--\narch/x86/kernel/early_printk.c=119=static __noendbr unsigned int tdx_serial_in(unsigned long addr, int offset)\narch/x86/kernel/early_printk.c-120-{\narch/x86/kernel/early_printk.c:121:\treturn tdx_inb(addr + offset);\narch/x86/kernel/early_printk.c-122-}\n--\narch/x86/kernel/early_printk.c=125=static __noendbr void tdx_serial_out(unsigned long addr, int offset, int value)\narch/x86/kernel/early_printk.c-126-{\narch/x86/kernel/early_printk.c:127:\ttdx_outb(value, addr + offset);\narch/x86/kernel/early_printk.c-128-}\n"
}

5/2 2026/09/23 20:32 llm patch-evaluator
0m Model:
gemini-3.8-flash

Args:
null

Results:
null

Tokens:
							input: 8255
							output: 41
							thoughts: 1573
						

Thoughts:
**Analysis of TDX-Related Code and Fuzzing Feasibility**

Okay, let's break this down. My primary concern is whether this TDX-related code is even *reachable* in a standard syzkaller fuzzing environment. The initial point is to trace the calls to `tdx_serial_in` and `tdx_serial_out`.  These are patched in `early_serial_tdx_init`, but that's only called from `setup_early_printk`, which is an *early* parameter (`earlyprintk=tdx...`). The crucial question is: Does syzkaller run as a TDX guest?  The answer is no. Standard virtualized environments like GCE and QEMU *cannot* emulate a TDX guest without the appropriate hardware. That means Emerald Rapids/Xeon 4th/5th gen with TDX enabled firmware/host support.

Even if `earlyprintk=tdx,keep` was hypothetically passed, which isn't standard syzkaller configuration, it's irrelevant without TDX hardware. The `early_serial_tdx_init` function itself checks `cpu_feature_enabled(X86_FEATURE_TDX_GUEST)`. In non-TDX environments, like the ones used by syzkaller, this check will fail and the function immediately returns, making those modifications unreachable.

Now, let's dissect the modified code locations:

1.  `Documentation/admin-guide/kernel-parameters.txt`: Doc changes. Not relevant to fuzzing; documentation updates are not code.
2.  `arch/x86/boot/compressed/tdx.c`: This is in the *decompressor*. The decompressor runs during the very early boot process, before the kernel even takes over. Syzkaller cannot fuzz code that executes before the kernel has initialized and is therefore unreachable.
3.  `arch/x86/coco/tdx/tdx.c`:  Here we have `#VE` handlers and some `tdx_inb` and `tdx_outb` functions.
    *   `handle_in` and `handle_out`:  These just refactor the constants, which makes them essentially the same.  They *only* run in a TDX guest handling `#VE` for port I/O.
    *   `tdx_inb` and `tdx_outb`:  These are *new* functions that are only used by `tdx_serial_in` and `tdx_serial_out` in `early_printk.c` and a local static inline copy in `boot/compressed/tdx.c`. They aren't called anywhere else.
4.  `arch/x86/kernel/early_printk.c`:  This is where `tdx_serial_in`, `tdx_serial_out`, `early_serial_tdx_init`, and the `setup_early_printk` modifications reside.  The critical section of code is:

    ```c
    #ifdef CONFIG_INTEL_TDX_GUEST
    	if (!strncmp(buf, "tdx", 3)) {
    		buf += 3;
    		early_serial_tdx_init();
    		early_serial_init(buf);
    		early_console_register(&early_serial_console, keep);
    		if (!strncmp(buf, ",ttyS", 5))
    			buf += 5;
    	}
    #endif
    ```

    The code only runs if `earlyprintk=tdx` is on the command line, and `CONFIG_INTEL_TDX_GUEST` is enabled, and the code calls the `early_serial_tdx_init` function.  The whole point of `earlyprintk` is that it's a very early console driver, used before the normal console is initialized. If `earlyprintk=tdx` is *not* on the command line, `early_serial_tdx_init()` will never be called, and the TDX code will never be executed. Even if `earlyprintk=tdx` *is* present, the code only runs during the *early* boot process. Is `early_printk` callable from userspace syscalls via syzkaller? Let's check how `early_serial_console` works and if `earlyprintk` can be fuzzed or reached at runtime.

In conclusion: This TDX code is *unreachable* in the standard syzkaller fuzzing environment. It requires a TDX guest and the correct kernel command-line parameters that are not used in normal fuzzing setup.  Even if you did somehow get the parameters in place,


6/2 2026/09/23 20:32 tool read-file
0m Args:
{
  "File": "arch/x86/kernel/early_printk.c",
  "FirstLine": 180,
  "LineCount": 80
}

Results:
{
  "Contents": " 180:\t}\n 181:\t\n 182:\t#define DEFAULT_BAUD 9600\n 183:\t\n 184:\tstatic __init void early_serial_init(char *s)\n 185:\t{\n 186:\t\tunsigned divisor;\n 187:\t\tunsigned long baud = DEFAULT_BAUD;\n 188:\t\tchar *e;\n 189:\t\n 190:\t\tif (*s == ',')\n 191:\t\t\t++s;\n 192:\t\n 193:\t\tif (*s) {\n 194:\t\t\tunsigned port;\n 195:\t\t\tif (!strncmp(s, \"0x\", 2)) {\n 196:\t\t\t\tearly_serial_base = simple_strtoul(s, \u0026e, 16);\n 197:\t\t\t} else {\n 198:\t\t\t\tstatic const int __initconst bases[] = { 0x3f8, 0x2f8 };\n 199:\t\n 200:\t\t\t\tif (!strncmp(s, \"ttyS\", 4))\n 201:\t\t\t\t\ts += 4;\n 202:\t\t\t\tport = simple_strtoul(s, \u0026e, 10);\n 203:\t\t\t\tif (port \u003e 1 || s == e)\n 204:\t\t\t\t\tport = 0;\n 205:\t\t\t\tearly_serial_base = bases[port];\n 206:\t\t\t}\n 207:\t\t\ts += strcspn(s, \",\");\n 208:\t\t\tif (*s == ',')\n 209:\t\t\t\ts++;\n 210:\t\t}\n 211:\t\n 212:\t\tif (*s) {\n 213:\t\t\tbaud = simple_strtoull(s, \u0026e, 0);\n 214:\t\n 215:\t\t\tif (baud == 0 || s == e)\n 216:\t\t\t\tbaud = DEFAULT_BAUD;\n 217:\t\t}\n 218:\t\n 219:\t\t/* Convert from baud to divisor value */\n 220:\t\tdivisor = 115200 / baud;\n 221:\t\n 222:\t\t/* Set up the HW */\n 223:\t\tearly_serial_hw_init(divisor);\n 224:\t}\n 225:\t\n 226:\tstatic __noendbr void mem32_serial_out(unsigned long addr, int offset, int value)\n 227:\t{\n 228:\t\tu32 __iomem *vaddr = (u32 __iomem *)addr;\n 229:\t\t/* shift implied by pointer type */\n 230:\t\twritel(value, vaddr + offset);\n 231:\t}\n 232:\tANNOTATE_NOENDBR_SYM(mem32_serial_out);\n 233:\t\n 234:\tstatic __noendbr unsigned int mem32_serial_in(unsigned long addr, int offset)\n 235:\t{\n 236:\t\tu32 __iomem *vaddr = (u32 __iomem *)addr;\n 237:\t\t/* shift implied by pointer type */\n 238:\t\treturn readl(vaddr + offset);\n 239:\t}\n 240:\tANNOTATE_NOENDBR_SYM(mem32_serial_in);\n 241:\t\n 242:\t/*\n 243:\t * early_mmio_serial_init() - Initialize MMIO-based early serial console.\n 244:\t * @s: MMIO-based serial specification.\n 245:\t */\n 246:\tstatic __init void early_mmio_serial_init(char *s)\n 247:\t{\n 248:\t\tunsigned long baudrate;\n 249:\t\tunsigned long membase;\n 250:\t\tchar *e;\n 251:\t\n 252:\t\tif (*s == ',')\n 253:\t\t\ts++;\n 254:\t\n 255:\t\tif (!strncmp(s, \"0x\", 2)) {\n 256:\t\t\t/* NB: only 32-bit addresses are supported. */\n 257:\t\t\tmembase = simple_strtoul(s, \u0026e, 16);\n 258:\t\t\tearly_serial_base = (unsigned long)early_ioremap(membase, PAGE_SIZE);\n 259:\t\n"
}

7/2 2026/09/23 20:32 llm patch-evaluator
0m Model:
gemini-3.8-flash

Args:
null

Results:
null

Tokens:
							input: 12054
							output: 25
							thoughts: 79
						

Thoughts:
Here's my thought process, as it stands:

**Debugging the TDX Initialization**

Okay, so I'm looking at `early_serial_tdx_init`. The first thing I see is that it immediately bails if `X86_FEATURE_TDX_GUEST` isn't enabled. That's a key dependency, clearly. Now, my immediate next step is to figure out *when* this flag is actually set. I need to trace its initialization. Time to break out the grep. Let's find all the instances of `X86_FEATURE_TDX_GUEST` within the codebase. That should give me the answer.



8/2 2026/09/23 20:32 tool grepper
0m Args:
{
  "Expression": "X86_FEATURE_TDX_GUEST"
}

Results:
{
  "Output": "arch/x86/coco/tdx/tdx.c=1147=void __init tdx_early_init(void)\n--\narch/x86/coco/tdx/tdx.c-1156-\narch/x86/coco/tdx/tdx.c:1157:\tsetup_force_cpu_cap(X86_FEATURE_TDX_GUEST);\narch/x86/coco/tdx/tdx.c-1158-\n--\narch/x86/include/asm/cpufeatures.h-239-#define X86_FEATURE_VCPUPREEMPT\t\t( 8*32+21) /* PV vcpu_is_preempted function */\narch/x86/include/asm/cpufeatures.h:240:#define X86_FEATURE_TDX_GUEST\t\t( 8*32+22) /* \"tdx_guest\" Intel Trust Domain Extensions Guest */\narch/x86/include/asm/cpufeatures.h-241-\n--\narch/x86/include/asm/kvm_para.h=34=static inline long kvm_hypercall0(unsigned int nr)\n--\narch/x86/include/asm/kvm_para.h-37-\narch/x86/include/asm/kvm_para.h:38:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/kvm_para.h-39-\t\treturn tdx_kvm_hypercall(nr, 0, 0, 0, 0);\n--\narch/x86/include/asm/kvm_para.h=48=static inline long kvm_hypercall1(unsigned int nr, unsigned long p1)\n--\narch/x86/include/asm/kvm_para.h-51-\narch/x86/include/asm/kvm_para.h:52:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/kvm_para.h-53-\t\treturn tdx_kvm_hypercall(nr, p1, 0, 0, 0);\n--\narch/x86/include/asm/kvm_para.h=62=static inline long kvm_hypercall2(unsigned int nr, unsigned long p1,\n--\narch/x86/include/asm/kvm_para.h-66-\narch/x86/include/asm/kvm_para.h:67:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/kvm_para.h-68-\t\treturn tdx_kvm_hypercall(nr, p1, p2, 0, 0);\n--\narch/x86/include/asm/kvm_para.h=77=static inline long kvm_hypercall3(unsigned int nr, unsigned long p1,\n--\narch/x86/include/asm/kvm_para.h-81-\narch/x86/include/asm/kvm_para.h:82:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/kvm_para.h-83-\t\treturn tdx_kvm_hypercall(nr, p1, p2, p3, 0);\n--\narch/x86/include/asm/kvm_para.h=92=static inline long kvm_hypercall4(unsigned int nr, unsigned long p1,\n--\narch/x86/include/asm/kvm_para.h-97-\narch/x86/include/asm/kvm_para.h:98:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/kvm_para.h-99-\t\treturn tdx_kvm_hypercall(nr, p1, p2, p3, p4);\n--\narch/x86/include/asm/unaccepted_memory.h=8=static inline void arch_accept_memory(phys_addr_t start, phys_addr_t end)\n--\narch/x86/include/asm/unaccepted_memory.h-10-\t/* Platform-specific memory-acceptance call goes here */\narch/x86/include/asm/unaccepted_memory.h:11:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST)) {\narch/x86/include/asm/unaccepted_memory.h-12-\t\tif (!tdx_accept_memory(start, end))\n--\narch/x86/include/asm/vmware.h=99=unsigned long vmware_hypercall1(unsigned long cmd, unsigned long in1)\n--\narch/x86/include/asm/vmware.h-102-\narch/x86/include/asm/vmware.h:103:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/vmware.h-104-\t\treturn vmware_tdx_hypercall(cmd, in1, 0, 0, 0,\n--\narch/x86/include/asm/vmware.h=123=unsigned long vmware_hypercall3(unsigned long cmd, unsigned long in1,\n--\narch/x86/include/asm/vmware.h-127-\narch/x86/include/asm/vmware.h:128:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/vmware.h-129-\t\treturn vmware_tdx_hypercall(cmd, in1, 0, 0, 0,\n--\narch/x86/include/asm/vmware.h=148=unsigned long vmware_hypercall4(unsigned long cmd, unsigned long in1,\n--\narch/x86/include/asm/vmware.h-152-\narch/x86/include/asm/vmware.h:153:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/vmware.h-154-\t\treturn vmware_tdx_hypercall(cmd, in1, 0, 0, 0,\n--\narch/x86/include/asm/vmware.h=173=unsigned long vmware_hypercall5(unsigned long cmd, unsigned long in1,\n--\narch/x86/include/asm/vmware.h-178-\narch/x86/include/asm/vmware.h:179:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/vmware.h-180-\t\treturn vmware_tdx_hypercall(cmd, in1, in3, in4, in5,\n--\narch/x86/include/asm/vmware.h=201=unsigned long vmware_hypercall6(unsigned long cmd, unsigned long in1,\n--\narch/x86/include/asm/vmware.h-206-\narch/x86/include/asm/vmware.h:207:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/vmware.h-208-\t\treturn vmware_tdx_hypercall(cmd, in1, in3, 0, 0,\n--\narch/x86/include/asm/vmware.h=228=unsigned long vmware_hypercall7(unsigned long cmd, unsigned long in1,\n--\narch/x86/include/asm/vmware.h-234-\narch/x86/include/asm/vmware.h:235:\tif (cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/include/asm/vmware.h-236-\t\treturn vmware_tdx_hypercall(cmd, in1, in3, in4, in5,\n--\narch/x86/kernel/cpu/mtrr/generic.c=440=void guest_force_mtrr_state(struct mtrr_var_range *var, unsigned int num_var,\n--\narch/x86/kernel/cpu/mtrr/generic.c-462-\t    !cpu_feature_enabled(X86_FEATURE_XENPV) \u0026\u0026\narch/x86/kernel/cpu/mtrr/generic.c:463:\t    !cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/kernel/cpu/mtrr/generic.c-464-\t\treturn;\n--\narch/x86/kernel/early_printk.c=131=static __init void early_serial_tdx_init(void)\narch/x86/kernel/early_printk.c-132-{\narch/x86/kernel/early_printk.c:133:\tif (!cpu_feature_enabled(X86_FEATURE_TDX_GUEST))\narch/x86/kernel/early_printk.c-134-\t\treturn;\n--\narch/x86/kernel/process.c=938=void __init select_idle_routine(void)\n--\narch/x86/kernel/process.c-952-\t\tstatic_call_update(x86_idle, mwait_idle);\narch/x86/kernel/process.c:953:\t} else if (cpu_feature_enabled(X86_FEATURE_TDX_GUEST)) {\narch/x86/kernel/process.c-954-\t\tpr_info(\"using TDX aware idle routine\\n\");\n--\narch/x86/kernel/relocate_kernel_64.S=129=SYM_CODE_START_LOCAL_NOALIGN(identity_mapped)\n--\narch/x86/kernel/relocate_kernel_64.S-204-\tandl\t$(X86_CR4_PAE | X86_CR4_LA57), %r13d\narch/x86/kernel/relocate_kernel_64.S:205:\tALTERNATIVE \"\", __stringify(orl $X86_CR4_MCE, %r13d), X86_FEATURE_TDX_GUEST\narch/x86/kernel/relocate_kernel_64.S-206-\tmovq\t%r13, %cr4\n--\ndrivers/virt/coco/tdx-guest/tdx-guest.c=392=static const struct x86_cpu_id tdx_guest_ids[] = {\ndrivers/virt/coco/tdx-guest/tdx-guest.c:393:\tX86_MATCH_FEATURE(X86_FEATURE_TDX_GUEST, NULL),\ndrivers/virt/coco/tdx-guest/tdx-guest.c-394-\t{}\n--\ntools/arch/x86/include/asm/cpufeatures.h-229-#define X86_FEATURE_VCPUPREEMPT\t\t( 8*32+21) /* PV vcpu_is_preempted function */\ntools/arch/x86/include/asm/cpufeatures.h:230:#define X86_FEATURE_TDX_GUEST\t\t( 8*32+22) /* \"tdx_guest\" Intel Trust Domain Extensions Guest */\ntools/arch/x86/include/asm/cpufeatures.h-231-\n"
}

9/2 2026/09/23 20:32 llm patch-evaluator
0m Model:
gemini-3.8-flash

Args:
null

Results:
null

Tokens:
							input: 15237
							output: 20
							thoughts: 62
						

Thoughts:
Here's my summary, as the expert:

**Tracing the TDX Guest Initialization**

Okay, so I'm trying to figure out how the TDX guest feature flag, specifically `X86_FEATURE_TDX_GUEST`, gets set. The code's pointing me towards `tdx_early_init`, which seems like the logical place to start. Now, the question is, *when* exactly is that function invoked? That's the key to understanding the overall initialization sequence. My next move is to dive into `arch/x86/coco/tdx/tdx.c` – that's where the core TDX driver code resides, and hopefully, I'll find the answer to the timing of `tdx_early_init` right there. That should shed light on the process.



10/2 2026/09/23 20:32 tool grepper
0m Args:
{
  "Expression": "tdx_early_init"
}

Results:
{
  "Output": "arch/x86/coco/tdx/tdx.c=1013=static int tdx_enc_status_change_prepare(unsigned long vaddr, int numpages,\n--\narch/x86/coco/tdx/tdx.c-1017-\t * Only handle shared-\u003eprivate conversion here.\narch/x86/coco/tdx/tdx.c:1018:\t * See the comment in tdx_early_init().\narch/x86/coco/tdx/tdx.c-1019-\t */\n--\narch/x86/coco/tdx/tdx.c=1026=static int tdx_enc_status_change_finish(unsigned long vaddr, int numpages,\n--\narch/x86/coco/tdx/tdx.c-1030-\t * Only handle private-\u003eshared conversion here.\narch/x86/coco/tdx/tdx.c:1031:\t * See the comment in tdx_early_init().\narch/x86/coco/tdx/tdx.c-1032-\t */\n--\narch/x86/coco/tdx/tdx.c=1133=static __init void tdx_announce(void)\n--\narch/x86/coco/tdx/tdx.c-1146-\narch/x86/coco/tdx/tdx.c:1147:void __init tdx_early_init(void)\narch/x86/coco/tdx/tdx.c-1148-{\n--\narch/x86/include/asm/tdx.h=57=struct ve_info {\n--\narch/x86/include/asm/tdx.h-69-\narch/x86/include/asm/tdx.h:70:void __init tdx_early_init(void);\narch/x86/include/asm/tdx.h-71-\n--\narch/x86/include/asm/tdx.h=90=void __init tdx_dump_td_ctls(u64 td_ctls);\n--\narch/x86/include/asm/tdx.h-93-\narch/x86/include/asm/tdx.h:94:static inline void tdx_early_init(void) { };\narch/x86/include/asm/tdx.h-95-static inline void tdx_halt(void) { };\n--\narch/x86/kernel/head64.c=222=asmlinkage __visible void __init __noreturn x86_64_start_kernel(char * real_mode_data)\n--\narch/x86/kernel/head64.c-278-\t/* Needed before cc_platform_has() can be used for TDX */\narch/x86/kernel/head64.c:279:\ttdx_early_init();\narch/x86/kernel/head64.c-280-\n"
}

11/2 2026/09/23 20:32 llm patch-evaluator
0m Model:
gemini-3.8-flash

Args:
null

Results:
null

Tokens:
							input: 16257
							output: 44
							thoughts: 30
						

Thoughts:
Okay, here's my interpretation of that thought process, assuming I'm a seasoned expert diving into some x86 kernel code:

**Diving into TDX Early Initialization**

Alright, time to get my hands dirty. My instinct is telling me we need to understand the early initialization sequence for TDX (Trust Domain Extensions) on x86, specifically within the kernel. The goal is to figure out the architectural setup and how this code fits into the overall boot process, probably to debug some security-related issue, or maybe I'm trying to improve its efficiency.

I'm thinking, "Let's crack open `tdx_early_init` and get straight to the code. I'm going to start with the `arch/x86/coco/tdx/tdx.c` file." This is the right place to be looking. That file is generally where the TDX-specific functionality lives within the x86 architecture implementation of the kernel. This `tdx_early_init` function is likely critical. It's probably responsible for setting up crucial data structures, enabling specific CPU features, and potentially establishing the initial environment needed for TDX operation. I expect to see operations related to guest-host communication, perhaps setting up memory mappings for the TDX guest, or even initial register writes. I'm curious to see how the code handles different hardware variants and whether it incorporates any fallback mechanisms. This should be interesting. Let's see what we've got.



12/2 2026/09/23 20:32 tool read-file
0m Args:
{
  "File": "arch/x86/coco/tdx/tdx.c",
  "FirstLine": 1145,
  "LineCount": 40
}

Results:
{
  "Contents": "1145:\t}\n1146:\t\n1147:\tvoid __init tdx_early_init(void)\n1148:\t{\n1149:\t\tu64 cc_mask;\n1150:\t\tu32 eax, sig[3];\n1151:\t\n1152:\t\tcpuid_count(TDX_CPUID_LEAF_ID, 0, \u0026eax, \u0026sig[0], \u0026sig[2],  \u0026sig[1]);\n1153:\t\n1154:\t\tif (memcmp(TDX_IDENT, sig, sizeof(sig)))\n1155:\t\t\treturn;\n1156:\t\n1157:\t\tsetup_force_cpu_cap(X86_FEATURE_TDX_GUEST);\n1158:\t\n1159:\t\t/* TSC is the only reliable clock in TDX guest */\n1160:\t\tsetup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);\n1161:\t\n1162:\t\tcc_vendor = CC_VENDOR_INTEL;\n1163:\t\n1164:\t\t/* Configure the TD */\n1165:\t\ttdx_setup(\u0026cc_mask);\n1166:\t\n1167:\t\tcc_set_mask(cc_mask);\n1168:\t\n1169:\t\t/*\n1170:\t\t * All bits above GPA width are reserved and kernel treats shared bit\n1171:\t\t * as flag, not as part of physical address.\n1172:\t\t *\n1173:\t\t * Adjust physical mask to only cover valid GPA bits.\n1174:\t\t */\n1175:\t\tphysical_mask \u0026= cc_mask - 1;\n1176:\t\n1177:\t\t/*\n1178:\t\t * The kernel mapping should match the TDX metadata for the page.\n1179:\t\t * load_unaligned_zeropad() can touch memory *adjacent* to that which is\n1180:\t\t * owned by the caller and can catch even _momentary_ mismatches.  Bad\n1181:\t\t * things happen on mismatch:\n1182:\t\t *\n1183:\t\t *   - Private mapping =\u003e Shared Page  == Guest shutdown\n1184:\t         *   - Shared mapping  =\u003e Private Page == Recoverable #VE\n"
}

13/2 2026/09/23 20:32 llm patch-evaluator
0m Model:
gemini-3.8-flash

Args:
null

Results:
null

Tokens:
							input: 17248
							output: 19
							thoughts: 1678
						

Thoughts:
**TDX Code Analysis and Fuzzing Reachability**

Okay, let's break this down from a fuzzing perspective. The initial check for "IntelTDX" via `cpuid_count` is a dead giveaway: we're talking about Intel TDX (Trust Domain Extensions) hardware.  My knowledge tells me that this is a *hardware*-based confidential computing technology, akin to AMD's SEV-SNP.  Standard QEMU or GCE environments, the ones syzkaller typically targets, won't have this CPUID leaf present or return the expected string. In fact, running `tdx_setup` performs TDCALLs, which results in #UD exception. This confirms TDX is exclusive to Intel hardware with specific extensions, and not emulated in standard environments.

Now, referring back to the triage philosophy, specifically sections 2 and 3 regarding WorthFuzzing=false: Is this TDX code, then, "Structurally unreachable hardware"? Absolutely.  QEMU TCG, which is the QEMU configuration for the fuzzing, cannot emulate TDX.  GCE has Confidential VMs with TDX, but syzkaller does not run inside a TDX guest, and does not use TDX.  So, no dice.

Let's look at the specific code touched by these changes.

1.  `arch/x86/boot/compressed/tdx.c` is involved in decompression during early boot.  Syzkaller can't get there.  It's before the kernel's even unpacked.  Unfuzzable.
2.  `arch/x86/kernel/early_printk.c` and `early_serial_tdx_init()` look like another dead end. This is `__init` code and is only executed at early boot, before the kernel even starts.  It's unloaded during `free_initmem` after the kernel has booted.  Syzkaller can't hit that either.  Even if the code was there, `earlyprintk=tdx` on the command line is an extremely unlikely scenario for syzkaller. The code also has a check for the `X86_FEATURE_TDX_GUEST` feature, which is not enabled. Therefore, even if specified, this code returns early. It seems `tdx_serial_in` and `tdx_serial_out` are not hooked up. These are also static functions that are never called.

3.  Finally, looking at the changes in `arch/x86/coco/tdx/tdx.c`:  The change seems to be in the TDX #VE exception handler. This can only execute in a TDX guest, and it seems to be just a macro rename (non-functional refactoring) of a constant.

So, in conclusion, the code modifications being assessed are *completely* unreachable in a standard QEMU/GCE environment, the environments typically utilized for syzkaller fuzzing. The TDX-specific code is either:

*   Executed in a pre-kernel boot stage.
*   Conditionally compiled, or relies on specific hardware features.
*   Only relevant in the TDX guest, but, even then, this specific part of the code is only executed during a #VE.

Therefore, WorthFuzzing = false. We can skip this!



14/2 2026/09/23 20:32 tool grepper
0m Args:
{
  "Expression": "setup_early_printk"
}

Results:
{
  "Output": "arch/arm/kernel/early_printk.c=33=static struct console early_console_dev = {\n--\narch/arm/kernel/early_printk.c-39-\narch/arm/kernel/early_printk.c:40:static int __init setup_early_printk(char *buf)\narch/arm/kernel/early_printk.c-41-{\n--\narch/arm/kernel/early_printk.c-46-\narch/arm/kernel/early_printk.c:47:early_param(\"earlyprintk\", setup_early_printk);\n--\narch/m68k/kernel/early_printk.c=21=static struct console early_console_instance = {\n--\narch/m68k/kernel/early_printk.c-26-\narch/m68k/kernel/early_printk.c:27:static int __init setup_early_printk(char *buf)\narch/m68k/kernel/early_printk.c-28-{\n--\narch/m68k/kernel/early_printk.c-42-}\narch/m68k/kernel/early_printk.c:43:early_param(\"earlyprintk\", setup_early_printk);\narch/m68k/kernel/early_printk.c-44-\n--\narch/mips/include/asm/setup.h=9=extern void prom_putchar(char);\narch/mips/include/asm/setup.h:10:extern void setup_early_printk(void);\narch/mips/include/asm/setup.h-11-\n--\narch/mips/kernel/early_printk.c=27=static struct console early_console_prom = {\n--\narch/mips/kernel/early_printk.c-33-\narch/mips/kernel/early_printk.c:34:void __init setup_early_printk(void)\narch/mips/kernel/early_printk.c-35-{\n--\narch/mips/kernel/setup.c=764=void __init setup_arch(char **cmdline_p)\n--\narch/mips/kernel/setup.c-771-#ifdef CONFIG_EARLY_PRINTK\narch/mips/kernel/setup.c:772:\tsetup_early_printk();\narch/mips/kernel/setup.c-773-#endif\n--\narch/s390/kernel/early_printk.c=24=void __init register_early_console(void)\n--\narch/s390/kernel/early_printk.c-33-\narch/s390/kernel/early_printk.c:34:static int __init setup_early_printk(char *buf)\narch/s390/kernel/early_printk.c-35-{\n--\narch/s390/kernel/early_printk.c-43-}\narch/s390/kernel/early_printk.c:44:early_param(\"earlyprintk\", setup_early_printk);\n--\narch/sh/kernel/sh_bios.c=137=static struct console bios_console = {\n--\narch/sh/kernel/sh_bios.c-144-\narch/sh/kernel/sh_bios.c:145:static int __init setup_early_printk(char *buf)\narch/sh/kernel/sh_bios.c-146-{\n--\narch/sh/kernel/sh_bios.c-167-}\narch/sh/kernel/sh_bios.c:168:early_param(\"earlyprintk\", setup_early_printk);\narch/sh/kernel/sh_bios.c-169-#endif\n--\narch/um/kernel/early_printk.c=16=static struct console early_console_dev = {\n--\narch/um/kernel/early_printk.c-22-\narch/um/kernel/early_printk.c:23:static int __init setup_early_printk(char *buf)\narch/um/kernel/early_printk.c-24-{\n--\narch/um/kernel/early_printk.c-31-\narch/um/kernel/early_printk.c:32:early_param(\"earlyprintk\", setup_early_printk);\n--\narch/x86/kernel/early_printk.c=400=static void early_console_register(struct console *con, int keep_early)\n--\narch/x86/kernel/early_printk.c-414-\narch/x86/kernel/early_printk.c:415:static int __init setup_early_printk(char *buf)\narch/x86/kernel/early_printk.c-416-{\n--\narch/x86/kernel/early_printk.c-485-\narch/x86/kernel/early_printk.c:486:early_param(\"earlyprintk\", setup_early_printk);\n"
}

15/2 2026/09/23 20:32 llm patch-evaluator
0m Model:
gemini-3.8-flash

Args:
null

Results:
null

Tokens:
							input: 20871
							output: 133
							thoughts: 1508
						

Thoughts:
**Fuzzing Reachability Assessment: Intel TDX Early Printk**

Okay, let's break this down. First, I need to make absolutely sure if any of these modifications are reachable within a standard fuzzing context. I'm going to review the changes systematically.

*   **Diff 1:** Documentation change, that's a non-issue. Doesn't affect the kernel's execution.
*   **Diff 2:** This is in the boot decompressor, before the kernel even starts. Irrelevant for syzkaller. Even if it was exploitable it runs before the fuzzer can start.
*   **Diff 3:** Macro renames and added `tdx_inb`/`tdx_outb`.
*   **Diffs 4 & 5:** Definitions and declarations for those TDX calls and macros.
*   **Diff 6:** This is where it gets interesting. We have `tdx_serial_in`/`out` and `early_serial_tdx_init()`. Crucially, this initialization code contains a `cpu_feature_enabled(X86_FEATURE_TDX_GUEST)` check. Then this is called during boot with `earlyprintk=tdx`.

Now, the crucial point: can this code be hit during syzkaller fuzzing? According to the instructions, we can only fuzz code that *can* be executed in standard virtualized environments. And that means QEMU or GCE with emulated devices.

Intel TDX requires specific hardware. Standard fuzzing setups don't have that. QEMU TCG doesn't emulate TDX, and KVM hosts in our fuzzing fleets aren't running TDX guest VMs.

Even *if* we were in a TDX guest, the `__init` code and boot parameter requirement are showstoppers. This is all *early* boot, before syzkaller even gets a chance to start. The `tdx_inb`/`outb` functions are only referenced by `tdx_serial_in`/`out`, which are also protected by the early boot and TDX guest checks.

Looking at the negative criteria, the modified code falls squarely into the "structurally unreachable hardware" and "unreachable execution paths" categories. Intel TDX requires specific hardware not emulated in our environments, and these paths are either early boot or TDX specific hypercalls.

Therefore, the verdict is clear: `WorthFuzzing=false`. The Reasoning is clear: This patch series adds earlyprintk support for Intel TDX guests using TDVMCALL hypercalls. The changes modify the x86 decompressor, early boot parameter parsing, and TDX-specific helpers. The modified code is structurally unreachable during fuzzing because it either executes only during early boot or strictly requires Intel TDX hardware features that are not present in standard virtualized fuzzing environments. No `FocusSymbols` or `EnableConfigs` are needed, as it is unreachable.

Now, let's prepare the `set-results` arguments:
*   `WorthFuzzing`: `false`
*   `Reasoning`: The patch series adds earlyprintk support for Intel TDX guests using TDVMCALL hypercalls. The changes modify the x86 decompressor, early boot parameter parsing in `arch/x86/kernel/early_printk.c` (`__init` code requiring `earlyprintk=tdx`), and TDX-specific helpers in `arch/x86/coco/tdx/tdx.c`. All modified code is structurally unreachable during fuzzing because it either executes only during early boot (`__init` / decompressor) or strictly requires Intel TDX hardware features (`X86_FEATURE_TDX_GUEST`) that are not present in standard virtualized fuzzing environments (QEMU/GCE).
*   `FocusSymbols`: `[]`
*   `EnableConfigs`: `[]`

And, let's run a sanity check on those parameters:
*   `WorthFuzzing`: Boolean - Check!
*   `Reasoning`: String - Check!
*   `FocusSymbols`: Array of string (empty if WorthFuzzing is false, or null) - Check!
*   `EnableConfigs`: Array of string (empty or null) - Check!

Alright, I am ready to invoke `set-results`.



16/2 2026/09/23 20:33 tool set-results
0m Args:
{
  "EnableConfigs": [],
  "FocusSymbols": [],
  "Reasoning": "The patch adds earlyprintk support for Intel TDX guests using TDVMCALL hypercalls. The modified code resides in the x86 decompressor, early boot __init parameter setup, and TDX-specific hypercall routines. All modified executable code is structurally unreachable during fuzzing because it either executes exclusively during early boot before userspace starts or requires Intel TDX hardware support (X86_FEATURE_TDX_GUEST) which is not available in standard virtualized fuzzing environments.",
  "WorthFuzzing": false
}

Results:
{
  "EnableConfigs": null,
  "FocusSymbols": [],
  "Reasoning": "The patch adds earlyprintk support for Intel TDX guests using TDVMCALL hypercalls. The modified code resides in the x86 decompressor, early boot __init parameter setup, and TDX-specific hypercall routines. All modified executable code is structurally unreachable during fuzzing because it either executes exclusively during early boot before userspace starts or requires Intel TDX hardware support (X86_FEATURE_TDX_GUEST) which is not available in standard virtualized fuzzing environments.",
  "WorthFuzzing": false
}

17/1 2026/09/23 20:33 action If
0m Args:
{
  "WorthFuzzing": false
}

Results:
null

LLM Calls Summary:
Total Calls Total Tokens Avg Tokens Total Duration (Seconds) Avg Duration (Seconds)
Tool Calls Summary:
Total Calls Total Duration (Seconds) Avg Duration (Seconds)