last executing test programs:

1m51.660993956s ago: executing program 1 (id=190):
r0 = syz_init_net_socket$nl_generic(0x10, 0x3, 0x10)
r1 = syz_genetlink_get_family_id$nl802154(&(0x7f0000001ec0), 0xffffffffffffffff)
sendmsg$NL802154_CMD_NEW_INTERFACE(r0, &(0x7f0000002000)={0x0, 0x0, &(0x7f0000001fc0)={&(0x7f0000001f40)={0x3c, r1, 0x1, 0x70bd2d, 0x25dfdbfb, {}, [@NL802154_ATTR_EXTENDED_ADDR={0xc, 0x17, {0xaaaaaaaaaaaa0102}}, @NL802154_ATTR_IFNAME={0xa, 0x4, 'wpan4\x00'}, @NL802154_ATTR_WPAN_PHY={0x8}, @NL802154_ATTR_IFTYPE={0x8, 0x5, 0x2}]}, 0x3c}, 0x1, 0x0, 0x0, 0x8051}, 0x40000a0)

1m51.580341415s ago: executing program 1 (id=191):
r0 = syz_open_dev$vim2m(&(0x7f0000000100), 0x7, 0x2)
ioctl$vim2m_VIDIOC_ENUM_FMT(r0, 0xc0405602, &(0x7f0000000140)={0xd, 0x1, 0x0, "ee471a55b5e2c266422ef07bbfd7a61e37466e060403bbd8115bd48970e86a02"})

1m51.508100513s ago: executing program 1 (id=192):
ioctl$SIOCSIFHWADDR(0xffffffffffffffff, 0x8b19, 0x0)
r0 = syz_init_net_socket$rose(0xb, 0x5, 0x0)
ioctl$sock_rose_SIOCADDRT(r0, 0x890b, &(0x7f0000000380)={@remote={0xcc, 0xcc, 0xcc, 0xcc, 0x2}, 0x6, @bcast, @bpq0, 0x0, [@remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x0}, @null, @netrom={0xbb, 0xbb, 0xbb, 0xbb, 0xbb, 0x0, 0x0}, @bcast, @default, @default, @default, @rose={0xbb, 0xbb, 0xbb, 0x1, 0x0}]})
r1 = syz_init_net_socket$rose(0xb, 0x5, 0x0)
socket$inet_mptcp(0x2, 0x1, 0x106)
connect$rose(r1, &(0x7f0000000200)=@short={0xb, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0x2}, @rose={0xbb, 0xbb, 0xbb, 0x1, 0x0}, 0x1, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x3}}, 0x1c)
connect$rose(r1, &(0x7f0000000100)=@short={0xb, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0x2}, @default, 0x1, @remote={0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0xcc, 0x3}}, 0x1c)
mkdirat(0xffffffffffffff9c, &(0x7f0000002040)='./file0\x00', 0x0)
r2 = openat$fuse(0xffffffffffffff9c, &(0x7f0000000300), 0x2, 0x0)
mount$fuse(0x0, &(0x7f00000020c0)='./file0\x00', &(0x7f0000002100), 0x0, &(0x7f0000000180)=ANY=[@ANYBLOB='fd=', @ANYRESHEX=r2, @ANYBLOB=',rootmode=00000000000000000040000,user_id=', @ANYRESDEC=0x0, @ANYBLOB=',group_id=', @ANYRESDEC=0x0])
r3 = fcntl$dupfd(r2, 0x406, r2)
bpf$BPF_PROG_RAW_TRACEPOINT_LOAD(0x5, &(0x7f00000005c0)={0x11, 0x10, &(0x7f0000000340)=@ringbuf={{0x18, 0x0, 0x0, 0x0, 0x4, 0x0, 0x0, 0x0, 0x5}, {{0x18, 0x1, 0x1, 0x0, r3}}, {}, [@func={0x85, 0x0, 0x1, 0x0, 0x1}], {{}, {}, {0x85, 0x0, 0x0, 0x84}}}, &(0x7f0000000000)='GPL\x00', 0x6, 0xcc, &(0x7f00000004c0)=""/204, 0x41100, 0x71, '\x00', 0x0, 0x0, 0xffffffffffffffff, 0x8, 0x0, 0x0, 0x10, &(0x7f0000000080)={0x5, 0xd, 0x1, 0x4}, 0x10, 0x0, 0x0, 0x7, 0x0, &(0x7f00000003c0)=[{0x5, 0x1, 0xf, 0x3}, {0x2, 0x4, 0xe, 0x7}, {0x1, 0x1, 0x9, 0xa}, {0x3, 0x5, 0xc, 0x5890454530e942c3}, {0x5, 0x2, 0x10, 0xb}, {0x4, 0x1, 0x2, 0xc}, {0x3, 0x2, 0x4}], 0x10, 0xa9}, 0x94)
syz_fuse_handle_req(r2, &(0x7f0000004180)="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", 0x2000, &(0x7f00000000c0)={0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, &(0x7f0000000200)={0x90, 0x0, 0xfffffffeffffffff, {0x5, 0x2, 0xfffffffffffffffe, 0x0, 0x0, 0x0, {0x40, 0x3, 0x0, 0x2, 0x0, 0x81, 0x0, 0x0, 0x120, 0x2000, 0x0, 0x0, 0x0, 0x500, 0x4}}}, 0x0, 0x0, 0x0, 0x0, 0x0})
write$FUSE_INIT(r2, &(0x7f0000000440)={0x50, 0x0, 0x0, {0x7, 0x29, 0x0, 0x10c024c, 0x40, 0x1, 0xfffffffe, 0x0, 0x0, 0x0, 0x0, 0x7fffffff}}, 0x50)
acct(&(0x7f0000000040)='./file0/file0\x00')

1m50.365165718s ago: executing program 1 (id=199):
syz_mount_image$iso9660(&(0x7f0000000380), &(0x7f00000000c0)='./file0\x00', 0x204818, &(0x7f0000000700)={[{@overriderock}, {@mode={'mode', 0x3d, 0xfa}}, {@hide}, {@dmode={'dmode', 0x3d, 0xb}}, {@uid}, {@iocharset={'iocharset', 0x3d, 'cp437'}}, {@map_off}, {@uid}]}, 0xff, 0x544, &(0x7f00000008c0)="$eJzs3V9v01YfwPGfS/sQ5ZGqRw8TQlWBQ9mkIpXgJBAUceU5J+mBxI5sB7VXqKIpqkhhokxae8O4YZu0vQh2uRexd4T2EjbZTvqHJjHQv6u+nwjOiX3s8zup5Z/cxscCAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAADEcmu2XbSkabzOkhrNrQV+a/dtf+sDC+TWvmJMvyJW/E9yObmSLrry1e7qy/F/czKbvpuVXFzkZPu/l//34NLkxGD7MQF/lt+/cE+bW9vPV3q97qujCuQMunpx9LqG9kzom5bT0MqEvqpWKvadxXqo6qapw+Uw0i3lBtqJ/EDNu7dUsVotK11Y9jteo+Y09WDh/dsl266oh4W2doLQ9+48LITuomk2jddI2sSr4zb34wPxkYlUpJ2WUmvrvW45awBxo+KnNCplNSrZpVKxWCoVK/eq9+7b9uSBBfZH5ECLozto8e90hGdv4HAm+vlfmmLEk44siRr6cqUmgfjSGrG+b5D/v7mjx/a7N/8PsvyV3dUzkuT/a+m7a6Py/4hYTu61KVuyLc9lRXrSk668OvWITvbVEC2eGAnFFyMtcZIlqr9ESVUqUhFbnsii1CUUJXUx0hQtoSxLKJHo5IhyJRAtjkTiSyBK5sWVW6KkKFWpSlmUaCnIsvjSEU8aUhMn2cuarCefe1mUNSrGnUbFkcPID467rpTGjJb8j8M70vM3cBh/D/I/AAAAAAA4t6zkt+/x9f+UXE1qddPU9mmHBQAAAAAAjlDyl//ZuJiKa1fF4vofAAAAAIDzxkrusbNEJC/X09qaWMntUvwSAAAAAACAcyL5+/+1uEjmQLku1s50KVz/AwAAAABwTvycOcd+2L5o/fmXBMGU9ba99LW1kczN62xcSLe78PEeo/qMNd3fSVJU0mJy0tWzVi5ttDMJ5od+sZYVh7UbgLMTwI+fE8ClSflVbqRtbqym5epgTdpLvm6auuD6zQdFcZzpiUgvRd+/WP9BkuH/4rWmrZys97qFpy97q0ksb+O9vN3oT6B4YB7FMbG8TuZbSO65GDriqeRGjH6/eUvW1ntde+/4J9LNJ/b3+GZ6TJ/vZC5tNdef8Ta/f/y5uM9iYdTo+1EUDznyd3IzbXNz/mZaDImilBVFaW8Uwz+Lw0dRzoqifMgoAOC0rGVkIUsO5N0vOMt9WXaXz8zu72Q+bTM/k5xYJ2eGnNHtrDO6fcjs9seBZyCNyrFxv799lFXfxxu8H9lv2CxZ8Ud44fXGd3J5c2v79vrGyrPus+6LUqlcse/a9r2STCXD6BfkHgDAEHufsWMNzf+ZT+Gx7mZcVf9/5ysFBXkqL6Unq7KQ3G2QfONg6F7ze76GsJBx1ZpP0mT6hJeFMVd1/0nuchjstzS27f4YyifwkwAA4OTMZeThT8n/CxnX3ftz+fir4/yep7UBAIDjoYMPVj76yQoC035SrFaLTrSoVeC7j1Rgag2tjBfpwF10vIZW7cCPfNdvxpXHpqZDFXbabT+IVN0PVNsPzVIyfaDqP/o91C3Hi4wbtpvaCbVyfS9y3EjVTOiqdufbpgkXdZBsHLa1a+rGdSLjeyr0O4GrC0qFWu9paGrai0zdxFVPtQPTcoKceuw3Oy2tajp0A9OO/HSHg76MV/eDVrLbwml/2AAAnBGbW9vPV3q97qtjrAztOHfiQwUAAH0ZWRoAAAAAAAAAAAAAAAAAAAAAAJwBJ3H/H5VzXhlMBX1W4qFyBJXMU8ebYz85AThW/wQAAP//rVVPjw==")
mount$bind(&(0x7f00000002c0)='.\x00', &(0x7f0000000200)='./file0/../file0\x00', 0x0, 0x109041, 0x0)
mount$bind(0x0, &(0x7f0000000140)='./file0\x00', 0x0, 0x100000, 0x0)
write$cgroup_devices(0xffffffffffffffff, 0x0, 0x0)
write$cgroup_devices(0xffffffffffffffff, 0x0, 0xa)
mount$bind(&(0x7f0000000180)='./file0/../file0\x00', &(0x7f0000000340)='./file0/file0\x00', 0x0, 0x81105a, 0x0)
mount$bind(&(0x7f0000000000)='./file0/../file0\x00', &(0x7f00000001c0)='./file0/file0\x00', 0x0, 0x199dc05, 0x0)
mount$bind(&(0x7f0000000100)='./file0/../file0\x00', &(0x7f0000000080)='./file0/file0/file0\x00', 0x0, 0x887008, 0x0)
r0 = syz_open_procfs(0xffffffffffffffff, &(0x7f0000000040)='mountinfo\x00')
read$FUSE(r0, &(0x7f0000006b40)={0x2020}, 0x2020)

1m50.140331162s ago: executing program 1 (id=203):
r0 = socket$nl_netfilter(0x10, 0x3, 0xc)
sendmsg$NFT_BATCH(r0, &(0x7f000000c2c0)={0x0, 0x0, &(0x7f0000000200)={&(0x7f00000003c0)=ANY=[@ANYBLOB="140000001000010000000000000000000000000a28000000000a0101000000005e1affd5020000000900010073797a300000000008000240000000032c000000030a01030000e6ff00000000020000000900010073797a30000000000900030073797a320000000014000000110001"], 0x7c}}, 0x0)
sendmsg$NFT_BATCH(r0, &(0x7f0000000080)={0x0, 0x0, &(0x7f0000000000)={&(0x7f0000000780)=ANY=[@ANYBLOB="1400000010001db1957c0000000000000000000a6c000000060a090400000000000000000200000040000480100001800c0001006e6f747261636b002c0001800e000100696d6d656469617465000000180002800c00028005000100c400000008000140000000090900010073797a30000000000900020073797a320000000020000000080a05000000000000000000020000000900010073797a30"], 0xb4}}, 0x0)

1m48.851452272s ago: executing program 1 (id=215):
rt_sigaction(0x1, &(0x7f0000000080)={0x0, 0x88000000, 0x0, {[0x7]}}, 0x0, 0x8, &(0x7f00000002c0))
r0 = syz_open_procfs(0x0, &(0x7f0000000500)='stat\x00')
lseek(r0, 0x80000000457, 0x0)

1m48.588581181s ago: executing program 32 (id=215):
rt_sigaction(0x1, &(0x7f0000000080)={0x0, 0x88000000, 0x0, {[0x7]}}, 0x0, 0x8, &(0x7f00000002c0))
r0 = syz_open_procfs(0x0, &(0x7f0000000500)='stat\x00')
lseek(r0, 0x80000000457, 0x0)

41.517884557s ago: executing program 0 (id=863):
capset(&(0x7f0000000200)={0x19980330}, &(0x7f0000000040))
r0 = socket$kcm(0x10, 0x2, 0x4)
sendmsg$kcm(r0, &(0x7f0000000000)={0x0, 0x0, &(0x7f0000000140)=[{&(0x7f0000000280)="89000000120081ae08060cdc030ec0007f03e3f70000000100e2ffca1b1f0000000004c00e72f750375ed08a56331dbf9ed7815e381ad6e747033a0093b837dc6cc01e32efaec8c7a6ec08120800030006010000bdad446b9bbc7a46e3988285dcdf12f21308f868fece01955fed0009d78f0a947ee2b49e33538afa8af92347514f0b56a20ff27fff", 0x89}], 0x1}, 0x0)

41.448904345s ago: executing program 0 (id=864):
prlimit64(0x0, 0xe, &(0x7f0000000140)={0x8, 0x8b}, 0x0)
add_key(&(0x7f00000013c0)='big_key\x00', &(0x7f0000000040)={'syz', 0x0}, &(0x7f0000000100)='[', 0xfe95, 0xffffffffffffffff)
sched_setscheduler(0x0, 0x1, &(0x7f0000000080)=0x7)
r0 = getpid()
sched_setaffinity(0x0, 0x8, &(0x7f00000002c0)=0x2)
sched_setscheduler(r0, 0x2, &(0x7f0000000200)=0x6)
mmap(&(0x7f0000000000/0xb36000)=nil, 0xb36000, 0xb635773f06ebbeef, 0x8031, 0xffffffffffffffff, 0x0)
socketpair$unix(0x1, 0x2, 0x0, &(0x7f0000000380)={<r1=>0xffffffffffffffff, <r2=>0xffffffffffffffff})
connect$unix(r1, &(0x7f000057eff8)=@file={0x0, './file0\x00'}, 0x6e)
sendmmsg$unix(r2, &(0x7f0000000000), 0x400000000000041, 0x0)
sched_setaffinity(r0, 0x8, &(0x7f0000000240)=0x2)
recvmmsg(r1, &(0x7f00000000c0), 0x10106, 0x2, 0x0)
syz_emit_ethernet(0x26, &(0x7f0000000000)={@broadcast, @dev={'\xaa\xaa\xaa\xaa\xaa', 0x18}, @void, {@arp={0x806, @generic={0x102, 0x805, 0x6, 0x4, 0xe9da94bda0ef4554, @dev={'\xaa\xaa\xaa\xaa\xaa', 0x29}, "620362b3", @remote}}}}, 0x0)
r3 = socket$inet6_tcp(0xa, 0x1, 0x0)
setsockopt$inet6_tcp_TCP_MD5SIG(r3, 0x6, 0xe, &(0x7f00000010c0)={@in6={{0xa, 0x0, 0x0, @ipv4={'\x00', '\xff\xff', @local}}}, 0x0, 0x0, 0x1b, 0x0, "61a1ed8439cde8054f2ada6fcd5fe76b933e8bb0ac60081e33dffa150835f7519d5f73b4e1d80eb4881a5b98cb9fb96d225d602392f816d0bdcc09b5063087117502d8c24f1fe97f61fd27a06d6a38a7"}, 0xd8)
sendto$inet6(r3, 0x0, 0x0, 0x20000841, &(0x7f0000b63fe4)={0xa, 0x2, 0xfffffffd, @empty}, 0x1c)
r4 = socket$nl_netfilter(0x10, 0x3, 0xc)
sendmsg$NFULNL_MSG_CONFIG(r4, &(0x7f0000000340)={&(0x7f00000000c0)={0x10, 0x0, 0x0, 0x800}, 0xc, &(0x7f00000001c0)={&(0x7f0000000180)=ANY=[@ANYBLOB="1c0000000104010100000000000000000100041d5ad1f7d12900050500010001000000"], 0x1c}, 0x1, 0x0, 0x0, 0x4040000}, 0x0)
r5 = socket$inet6_sctp(0xa, 0x5, 0x84)
bind$inet6(r5, &(0x7f00004b8fe4)={0xa, 0x4e23, 0x80000, @loopback}, 0x1c)

40.527432113s ago: executing program 0 (id=868):
mkdirat(0xffffffffffffff9c, 0x0, 0x0)
r0 = openat$ipvs(0xffffffffffffff9c, &(0x7f0000000100)='/proc/sys/net/ipv4/vs/sync_ports\x00', 0x2, 0x0)
write$cgroup_int(r0, &(0x7f0000000340)=0x400, 0x12)
setsockopt$IP_VS_SO_SET_STARTDAEMON(0xffffffffffffffff, 0x0, 0x48b, &(0x7f0000000000)={0x1, 'veth0_to_hsr\x00'}, 0x18)

40.41790809s ago: executing program 0 (id=869):
mkdirat(0xffffffffffffff9c, &(0x7f0000000040)='./file0\x00', 0x0)
mount$bind(&(0x7f0000000380)='./file0\x00', &(0x7f0000000200)='./file0\x00', 0x0, 0x2125099, 0x0)
mount$bind(0x0, &(0x7f00000005c0)='./file0\x00', 0x0, 0x100000, 0x0)
mount$bind(&(0x7f0000000000)='.\x00', &(0x7f0000000200)='./file0/../file0\x00', 0x0, 0x101097, 0x0)
mount$bind(&(0x7f0000000100)='./file0/file0\x00', &(0x7f00000000c0)='./file0/file0\x00', 0x0, 0xb500a, 0x0)
mount$bind(0x0, &(0x7f0000000240)='./file0/file0\x00', 0x0, 0x80000, 0x0)
mount$bind(&(0x7f0000000540)='./file0\x00', &(0x7f0000000300)='./file0\x00', 0x0, 0x2145499, 0x0)
mount$tmpfs(0x0, &(0x7f0000000000)='./file0\x00', &(0x7f0000000040), 0x0, 0x0)

40.417529191s ago: executing program 0 (id=870):
r0 = openat$nullb(0xffffffffffffff9c, &(0x7f0000000000), 0x81, 0x0)
ioctl$BLKZEROOUT(r0, 0x127f, &(0x7f0000000240)={0x0, 0x1000000})

40.144947097s ago: executing program 0 (id=871):
prctl$PR_SET_SYSCALL_USER_DISPATCH_ON(0x3b, 0x1, 0x3, 0x5, &(0x7f0000006680))
r0 = gettid()
sched_getscheduler(r0)

40.079322294s ago: executing program 33 (id=871):
prctl$PR_SET_SYSCALL_USER_DISPATCH_ON(0x3b, 0x1, 0x3, 0x5, &(0x7f0000006680))
r0 = gettid()
sched_getscheduler(r0)

2.510677383s ago: executing program 4 (id=1236):
mkdirat(0xffffffffffffff9c, &(0x7f0000000080)='./file1\x00', 0x0)
mount$fuse(0x0, 0x0, 0x0, 0x2b38094, &(0x7f0000000400)=ANY=[@ANYBLOB='fd=', @ANYRESHEX=0x0])
mount(0x0, &(0x7f0000000380)='./file1\x00', &(0x7f0000000040)='autofs\x00', 0x0, &(0x7f0000000400))
chdir(&(0x7f0000000080)='./file1\x00')
r0 = open(&(0x7f0000000000)='.\x00', 0x0, 0x0)
ioctl$AUTOFS_IOC_PROTOSUBVER(r0, 0x80049367, &(0x7f00000001c0))

2.430951503s ago: executing program 4 (id=1237):
syz_open_dev$vim2m(&(0x7f0000000000), 0x47b, 0x2)
prlimit64(0x0, 0xe, &(0x7f0000000140)={0x8, 0x88}, 0x0)
sched_setscheduler(0x0, 0x2, &(0x7f0000000180)=0x7)
r0 = getpid()
sched_setscheduler(r0, 0x2, &(0x7f0000000200)=0x7)
mmap(&(0x7f0000000000/0xb36000)=nil, 0xb36000, 0xb635773f06ebbee2, 0x8031, 0xffffffffffffffff, 0x0)
socketpair$unix(0x1, 0x2, 0x0, &(0x7f0000000200)={<r1=>0xffffffffffffffff, <r2=>0xffffffffffffffff})
connect$unix(r1, &(0x7f000057eff8)=@abs={0x0, 0x0, 0x4e21}, 0x6e)
sendmmsg$unix(r2, &(0x7f0000000000), 0x651, 0x0)
recvmmsg(r1, &(0x7f00000000c0), 0x10106, 0x2, 0x0)
sched_setscheduler(0x0, 0x2, &(0x7f0000000000)=0x6)
bpf$BPF_RAW_TRACEPOINT_OPEN(0x11, 0x0, 0x0)
prctl$PR_SET_MM_MAP(0x23, 0xe, &(0x7f0000000080)={&(0x7f0000ff0000/0x1000)=nil, &(0x7f0000ffd000/0x3000)=nil, &(0x7f0000ffc000/0x4000)=nil, &(0x7f0000ffd000/0x3000)=nil, &(0x7f0000ff8000/0x4000)=nil, &(0x7f0000ffc000/0x1000)=nil, &(0x7f0000fff000/0x1000)=nil, &(0x7f0000ffb000/0x3000)=nil, &(0x7f0000ffd000/0x1000)=nil, &(0x7f0000ffc000/0x4000)=nil, &(0x7f0000ffc000/0x4000)=nil, 0x0}, 0x68)
sendmsg$NFT_BATCH(0xffffffffffffffff, &(0x7f0000000080)={0x0, 0x0, 0x0}, 0x0)
r3 = io_uring_setup(0x9, &(0x7f0000000040)={0x0, 0x20c8a1, 0x1c881, 0x8, 0xd1})
r4 = io_uring_setup(0x1b7b, &(0x7f0000000040)={0x0, 0xc89f, 0xc000, 0x7, 0x20002f7})
ioctl$sock_ipv6_tunnel_SIOCADDTUNNEL(0xffffffffffffffff, 0x89f1, &(0x7f0000000140)={'syztnl2\x00', &(0x7f0000000000)={'syztnl2\x00', 0x0, 0x0, 0x0, 0x0, 0x5c8c, 0x0, @empty, @mcast1, 0x80, 0x0, 0x0, 0x20000000}})
sendmsg$IPSET_CMD_LIST(0xffffffffffffffff, &(0x7f00000000c0)={&(0x7f0000000000)={0x2d, 0x0, 0x1f, 0x2}, 0xc, 0x0, 0x1, 0x0, 0x0, 0x40}, 0x4)
io_uring_enter(r4, 0x2219, 0x7721, 0x16, 0x0, 0x0)
rt_sigqueueinfo(0x0, 0x38, &(0x7f0000000240)={0x20, 0x523})
io_uring_enter(r3, 0x2219, 0x7721, 0x16, 0x0, 0x0)

1.527656909s ago: executing program 4 (id=1254):
syz_usb_connect(0x0, 0x24, &(0x7f0000000280)={{0x12, 0x1, 0x141, 0xf2, 0xc5, 0x96, 0x20, 0x16d0, 0x10b8, 0xde8e, 0x1, 0x2, 0x3, 0x1, [{{0x9, 0x2, 0x12, 0x1, 0x0, 0x0, 0x10, 0x0, [{{0x9, 0x4, 0x0, 0x2, 0x0, 0x0, 0x83, 0xec}}]}}]}}, 0x0)
r0 = socket(0x10, 0x3, 0x0)
setsockopt$netlink_NETLINK_TX_RING(r0, 0x10e, 0xc, &(0x7f0000000040)={0x802}, 0x10)
sendmsg$nl_generic(r0, &(0x7f0000000000)={0x0, 0x0, &(0x7f0000000080)={&(0x7f0000000280)=ANY=[@ANYBLOB="20000000520001000000000000000000020000000c"], 0x20}}, 0x0)

520.877732ms ago: executing program 2 (id=1255):
mmap(&(0x7f0000000000/0x400000)=nil, 0x1400000, 0x0, 0xc3072, 0xffffffffffffffff, 0x0)
r0 = socket$inet6_tcp(0xa, 0x1, 0x0)
mmap(&(0x7f0000ffc000/0x3000)=nil, 0x3000, 0x2, 0x12, r0, 0x604ab000)

505.233266ms ago: executing program 3 (id=1256):
r0 = gettid()
timer_create(0x0, &(0x7f0000533fa0)={0x0, 0x21, 0x800000000004, @tid=r0}, &(0x7f0000bbdffc))
timer_settime(0x0, 0x0, &(0x7f0000000280)={{0x0, 0x989680}, {0x0, 0x989680}}, 0x0)
clock_nanosleep(0x1, 0x0, &(0x7f0000000080)={0x77359400}, &(0x7f0000001b40))

426.677408ms ago: executing program 3 (id=1257):
r0 = bpf$MAP_CREATE(0x0, &(0x7f0000000180)=@base={0x1b, 0x0, 0x0, 0x8000}, 0x50)
r1 = bpf$PROG_LOAD(0x5, &(0x7f00000007c0)={0x11, 0x19, &(0x7f0000000440)=@ringbuf={{0x18, 0x0, 0x0, 0x0, 0x5, 0x0, 0x0, 0x0, 0x2}, {{0x18, 0x1, 0x1, 0x0, r0}}, {}, [@ringbuf_output={{0x18, 0x1, 0x1, 0x0, r0}, {0x7, 0x0, 0xb, 0x8, 0x0, 0x0, 0x3ff}, {}, {}, {}, {}, {0x7, 0x0, 0xb, 0x4, 0x0, 0x0, 0x2}}, @call={0x85, 0x0, 0x0, 0x2a}], {{}, {0x7, 0x0, 0xb, 0x2, 0x0, 0x0, 0x1}, {0x85, 0x0, 0x0, 0x85}}}, &(0x7f0000000040)='GPL\x00', 0x0, 0x0, 0x0, 0x40efe, 0x0, '\x00', 0x0, @fallback=0x19, 0xffffffffffffffff, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}, 0x94)
bpf$BPF_RAW_TRACEPOINT_OPEN(0x11, &(0x7f0000000080)={&(0x7f0000000000)='tlb_flush\x00', r1}, 0x10)

426.417224ms ago: executing program 2 (id=1258):
syz_mount_image$exfat(&(0x7f00000000c0), &(0x7f0000000000)='./file0\x00', 0x810c90, &(0x7f0000000140)=ANY=[@ANYRES16=0x0, @ANYRESHEX=0x0, @ANYBLOB=',utf8,iocharset=mk=00000000000000000000000,iocharset=iso8859-3,errors=continue,\x00'/92], 0x1, 0x1520, &(0x7f0000001980)="$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")
bpf$MAP_CREATE(0x0, 0x0, 0x48)
bpf$MAP_UPDATE_ELEM_TAIL_CALL(0x2, 0x0, 0x0)
write$P9_RVERSION(0xffffffffffffffff, &(0x7f0000000480)=ANY=[@ANYBLOB], 0x15)
r0 = socket(0xa, 0x3, 0xff)
connect$inet6(r0, &(0x7f0000000140)={0xa, 0x4e20, 0x0, @empty, 0x4000002}, 0x1c)
setsockopt$inet6_int(r0, 0x29, 0x19, &(0x7f0000000100)=0x1, 0x4)
syz_emit_ethernet(0x6e, &(0x7f0000000280)={@multicast, @broadcast, @void, {@ipv6={0x86dd, @icmpv6={0x9, 0x6, 'z&-', 0x38, 0x3a, 0xfe, @local, @mcast2, {[], @pkt_toobig={0x2, 0x0, 0x0, 0x4000500, {0x2, 0x6, "081331", 0x3f6f, 0xff, 0x0, @mcast1, @loopback, [@fragment={0x84, 0x0, 0xa, 0x0, 0x0, 0x7, 0x65}]}}}}}}}, 0x0)
sendmmsg$unix(r0, &(0x7f0000000400)=[{{0x0, 0x0, &(0x7f00000003c0)=[{&(0x7f00000001c0)="cefc73d8777372c69df0fb4385b2f639740dc9fe213362b075161355d2847e15d1e8c4510593ebfbb4416f108a94df4fa6e5b00f2695ed8638894a666ecc7d", 0x3f}], 0x1, 0x0, 0x0, 0x4000}}], 0x1, 0x20008000)

426.084226ms ago: executing program 3 (id=1259):
syz_mount_image$exfat(&(0x7f00000000c0), &(0x7f0000000000)='./file0\x00', 0x800, &(0x7f00000004c0)={[{@discard}, {@gid}, {@errors_continue}, {@errors_remount}, {@iocharset={'iocharset', 0x3d, 'cp861'}}, {}, {@gid}, {@discard}, {@discard}, {@errors_remount}, {@iocharset={'iocharset', 0x3d, 'iso8859-2'}}]}, 0x1, 0x152d, &(0x7f0000001cc0)="$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")
r0 = openat$cgroup_root(0xffffffffffffff9c, &(0x7f0000000000), 0x200002, 0x0)
openat$cgroup_ro(r0, &(0x7f0000000040)='cgroup.freeze\x00', 0x275a, 0x0)

349.892514ms ago: executing program 2 (id=1260):
syz_mount_image$ext4(&(0x7f0000000180)='ext4\x00', &(0x7f0000000500)='./bus\x00', 0x1000c40, &(0x7f00000002c0), 0x5, 0x51c, &(0x7f0000000700)="$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")
fchmodat(0xffffffffffffff9c, &(0x7f0000000000)='.\x00', 0xfffffed3)
unlink(&(0x7f0000000040)='./file2\x00')

349.596083ms ago: executing program 3 (id=1261):
syz_mount_image$ext4(&(0x7f00000004c0)='ext4\x00', &(0x7f0000000500)='./file0\x00', 0x1000410, &(0x7f0000000100)={[{@grpid}, {@grpquota}]}, 0x4, 0x4eb, &(0x7f0000000540)="$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")
r0 = openat(0xffffffffffffff9c, &(0x7f0000000040)='.\x00', 0x0, 0x0)
getgroups(0x2, &(0x7f0000000100)=[0xee00, <r1=>0x0])
fchown(r0, 0x0, r1)
newfstatat(0xffffffffffffff9c, 0x0, 0x0, 0x400)
setuid(0x0)
lsetxattr$system_posix_acl(&(0x7f0000000000)='./file0\x00', &(0x7f0000000080)='system.posix_acl_access\x00', &(0x7f0000000440)={{}, {0x1, 0x1}, [], {}, [], {0x10, 0x4}}, 0x24, 0x1)

269.527144ms ago: executing program 2 (id=1262):
r0 = socket$kcm(0x2, 0x200000000000001, 0x0)
setsockopt$sock_attach_bpf(r0, 0x1, 0x50, &(0x7f0000000100), 0x48)

268.987ms ago: executing program 4 (id=1263):
r0 = socket$inet6_mptcp(0xa, 0x1, 0x106)
getsockopt$inet6_mptcp_buf(r0, 0x11c, 0x4, &(0x7f00000020c0)=""/156, &(0x7f0000000040)=0x9c)

203.825513ms ago: executing program 4 (id=1264):
r0 = socket$alg(0x26, 0x5, 0x0)
bind$alg(r0, &(0x7f0000000080)={0x26, 'rng\x00', 0x0, 0x0, 'ansi_cprng\x00'}, 0x58)
accept4(r0, 0x0, 0x0, 0x0)
r1 = syz_io_uring_setup(0xbda, &(0x7f0000000640)={0x0, 0xec25, 0x8, 0x1, 0x40000333}, &(0x7f0000000dc0)=<r2=>0x0, &(0x7f00000001c0)=<r3=>0x0)
syz_memcpy_off$IO_URING_METADATA_GENERIC(r2, 0x4, &(0x7f0000000180)=0xfffffffc, 0x0, 0x4)
bpf$BPF_RAW_TRACEPOINT_OPEN(0x11, 0x0, 0x0)
syz_io_uring_submit(r2, r3, &(0x7f0000000200)=@IORING_OP_READV=@pass_iovec={0x1, 0x0, 0x0, @fd_index=0x4, 0x0, &(0x7f0000000600)=[{&(0x7f0000000440)=""/224, 0xe0}], 0x1})
io_uring_enter(r1, 0x847ba, 0x0, 0xe, 0x0, 0x0)

194.480262ms ago: executing program 3 (id=1265):
r0 = openat$ocfs2_control(0xffffffffffffff9c, &(0x7f0000000380), 0x121682, 0x0)
read$nci(r0, &(0x7f0000000100)=""/107, 0x6b)
write$nci(r0, &(0x7f0000000100)=ANY=[], 0x4)
writev(r0, &(0x7f00000002c0)=[{&(0x7f0000000840)="17db", 0x2}], 0x1)

130.016128ms ago: executing program 2 (id=1266):
r0 = openat$sysfs(0xffffffffffffff9c, &(0x7f0000000040)='/sys/power/image_size', 0x20202, 0x0)
sendfile(r0, r0, 0x0, 0xc3)
r1 = syz_open_dev$tty1(0xc, 0x4, 0x1)
ioctl$TCXONC(r1, 0x540a, 0x0)
bpf$BPF_RAW_TRACEPOINT_OPEN(0x11, 0x0, 0x0)
r2 = syz_open_dev$evdev(&(0x7f00000000c0), 0x2, 0x862b01)
ioctl$EVIOCSFF(0xffffffffffffffff, 0x40304580, &(0x7f00000003c0)={0x55, 0x8ea9, 0xfffd, {0x800, 0x5}, {0x51, 0x2}, @cond=[{0x1ff, 0x5388, 0x6f5, 0x800, 0xc7, 0xb}, {0xffff, 0x5, 0x1, 0x46, 0x6, 0xfd}]})
syz_open_dev$evdev(&(0x7f0000000080), 0x2, 0x842)
accept4$inet(0xffffffffffffffff, 0x0, 0x0, 0x80000)
write$char_usb(r2, &(0x7f0000000040)="e2", 0x2250)

66.651068ms ago: executing program 2 (id=1267):
r0 = socket$nl_route(0x10, 0x3, 0x0)
sendmsg$nl_route(r0, &(0x7f0000000140)={0x0, 0x0, &(0x7f00000003c0)={&(0x7f0000000440)=@newlink={0x5c, 0x10, 0x801, 0x0, 0x0, {}, [@IFLA_XDP={0x34, 0x2b, 0x0, 0x1, [@IFLA_XDP_FD={0x8}, @IFLA_XDP_FLAGS={0x8, 0x3, 0x19}, @IFLA_XDP_FD={0x8}, @IFLA_XDP_EXPECTED_FD={0x8}, @IFLA_XDP_FD={0x8}, @IFLA_XDP_EXPECTED_FD={0xffffff82}]}, @IFLA_GROUP={0x8}]}, 0x5c}}, 0x0)

452.642µs ago: executing program 3 (id=1268):
r0 = openat$tun(0xffffffffffffff9c, &(0x7f0000000000), 0x2241, 0x0)
ioctl$TUNSETIFF(r0, 0x400454ca, &(0x7f0000000380)={'pimreg\x00', 0x5005})
r1 = socket$nl_route(0x10, 0x3, 0x0)
write$FUSE_DIRENTPLUS(0xffffffffffffffff, 0x0, 0xb0)
sendmsg$nl_route(r1, &(0x7f0000000200)={0x0, 0x0, &(0x7f0000000180)={&(0x7f00000000c0)=ANY=[@ANYBLOB="280000001000010024bd7000fc0ddf2500000000", @ANYRES32=0x0, @ANYBLOB="1b0b04000300000008001b"], 0x28}, 0x1, 0x0, 0x0, 0x68010}, 0x0)
write$tun(r0, &(0x7f0000000240)={@void, @val={0x3, 0x0, 0x8, 0x6ec, 0x7, 0x2}, @ipv4=@igmp={{0x5, 0x4, 0x2, 0x25, 0x1c, 0x60, 0x0, 0xd5, 0x2, 0x0, @initdev={0xac, 0x1e, 0x1, 0x0}, @broadcast}, {0x14, 0xfd, 0x0, @multicast2}}}, 0x26)

0s ago: executing program 4 (id=1269):
r0 = bpf$BPF_PROG_RAW_TRACEPOINT_LOAD(0x5, &(0x7f0000000180)={0x18, 0x5, &(0x7f0000000280)=ANY=[@ANYBLOB="1801000021000000000000003b810000850000006d000000070000000000000095"], &(0x7f0000000040)='syzkaller\x00', 0x0, 0x0, 0x0, 0x0, 0x0, '\x00', 0x0, 0x2}, 0x90)
bpf$BPF_RAW_TRACEPOINT_OPEN(0x11, &(0x7f0000000880)={&(0x7f0000000a80)='kfree\x00', r0}, 0x10)
r1 = socket$nl_netfilter(0x10, 0x3, 0xc)
sendmsg$NFT_BATCH(r1, &(0x7f00000000c0)={0x0, 0x1b, &(0x7f0000000100)={&(0x7f0000000540)=ANY=[@ANYBLOB="14000000100001000b000000000000000000000a20000000000a0300000000f5ffffff00010000000900010073797a300000000044000000090a010400000000000000000100000008000a40000000000900020073797a32000000000900010073797a3000000000080005400000001f08000340000000045c0000000c0a01020000000000000000010000000900020073797a32000000000900010073797a3000000000300003802c00008028000180230001"], 0xe8}}, 0x0)

kernel console output (not intermixed with test programs):

Warning: Permanently added '[localhost]:56579' (ED25519) to the list of known hosts.
syzkaller login: [   62.318883][ T5843] cgroup: Unknown subsys name 'net'
[   62.429183][ T5843] cgroup: Unknown subsys name 'cpuset'
[   62.433240][ T5843] cgroup: Unknown subsys name 'rlimit'
Setting up swapspace version 1, size = 127995904 bytes
[   64.171784][ T5843] Adding 124996k swap on ./swap-file.  Priority:0 extents:1 across:124996k 
[   71.089814][ T1362] ieee802154 phy0 wpan0: encryption failed: -22
[   71.091755][ T1362] ieee802154 phy1 wpan1: encryption failed: -22
[   73.466599][ T5926] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   73.479469][ T5926] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   73.486805][ T5926] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   73.506353][ T5926] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   73.510407][ T5926] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   73.556214][ T5926] Bluetooth: hci1: unexpected cc 0x0c03 length: 249 > 1
[   73.560253][ T5926] Bluetooth: hci1: unexpected cc 0x1003 length: 249 > 9
[   73.564370][ T5926] Bluetooth: hci1: unexpected cc 0x1001 length: 249 > 9
[   73.582383][   T56] Bluetooth: hci2: unexpected cc 0x0c03 length: 249 > 1
[   73.587495][   T56] Bluetooth: hci2: unexpected cc 0x1003 length: 249 > 9
[   73.590696][   T56] Bluetooth: hci1: unexpected cc 0x0c23 length: 249 > 4
[   73.594385][   T56] Bluetooth: hci1: unexpected cc 0x0c38 length: 249 > 2
[   73.619945][ T5934] Bluetooth: hci2: unexpected cc 0x1001 length: 249 > 9
[   73.623922][ T5934] Bluetooth: hci2: unexpected cc 0x0c23 length: 249 > 4
[   73.627279][ T5934] Bluetooth: hci2: unexpected cc 0x0c38 length: 249 > 2
[   73.911828][ T5925] chnl_net:caif_netlink_parms(): no params data found
[   74.022872][ T5930] chnl_net:caif_netlink_parms(): no params data found
[   74.092892][ T5925] bridge0: port 1(bridge_slave_0) entered blocking state
[   74.095425][ T5925] bridge0: port 1(bridge_slave_0) entered disabled state
[   74.100718][ T5925] bridge_slave_0: entered allmulticast mode
[   74.103579][ T5925] bridge_slave_0: entered promiscuous mode
[   74.117834][ T5928] chnl_net:caif_netlink_parms(): no params data found
[   74.129137][ T5925] bridge0: port 2(bridge_slave_1) entered blocking state
[   74.131406][ T5925] bridge0: port 2(bridge_slave_1) entered disabled state
[   74.133699][ T5925] bridge_slave_1: entered allmulticast mode
[   74.137224][ T5925] bridge_slave_1: entered promiscuous mode
[   74.196435][ T5925] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   74.206316][ T5925] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   74.262347][ T5925] team0: Port device team_slave_0 added
[   74.266790][ T5925] team0: Port device team_slave_1 added
[   74.274658][ T5930] bridge0: port 1(bridge_slave_0) entered blocking state
[   74.278061][ T5930] bridge0: port 1(bridge_slave_0) entered disabled state
[   74.280618][ T5930] bridge_slave_0: entered allmulticast mode
[   74.283710][ T5930] bridge_slave_0: entered promiscuous mode
[   74.325212][ T5930] bridge0: port 2(bridge_slave_1) entered blocking state
[   74.328358][ T5930] bridge0: port 2(bridge_slave_1) entered disabled state
[   74.331120][ T5930] bridge_slave_1: entered allmulticast mode
[   74.334949][ T5930] bridge_slave_1: entered promiscuous mode
[   74.339106][ T5925] batman_adv: batadv0: Adding interface: batadv_slave_0
[   74.341729][ T5925] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   74.351782][ T5925] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   74.358126][ T5925] batman_adv: batadv0: Adding interface: batadv_slave_1
[   74.360494][ T5925] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   74.370059][ T5925] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   74.408275][ T5928] bridge0: port 1(bridge_slave_0) entered blocking state
[   74.410829][ T5928] bridge0: port 1(bridge_slave_0) entered disabled state
[   74.413502][ T5928] bridge_slave_0: entered allmulticast mode
[   74.417402][ T5928] bridge_slave_0: entered promiscuous mode
[   74.436225][ T5930] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   74.439688][ T5928] bridge0: port 2(bridge_slave_1) entered blocking state
[   74.442724][ T5928] bridge0: port 2(bridge_slave_1) entered disabled state
[   74.445600][ T5928] bridge_slave_1: entered allmulticast mode
[   74.449745][ T5928] bridge_slave_1: entered promiscuous mode
[   74.470692][ T5930] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   74.519404][ T5925] hsr_slave_0: entered promiscuous mode
[   74.522136][ T5925] hsr_slave_1: entered promiscuous mode
[   74.537945][ T5928] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   74.544623][ T5928] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   74.561120][ T5930] team0: Port device team_slave_0 added
[   74.565633][ T5930] team0: Port device team_slave_1 added
[   74.651195][ T5928] team0: Port device team_slave_0 added
[   74.653930][ T5930] batman_adv: batadv0: Adding interface: batadv_slave_0
[   74.656369][ T5930] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   74.664672][ T5930] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   74.674204][ T5928] team0: Port device team_slave_1 added
[   74.678190][ T5930] batman_adv: batadv0: Adding interface: batadv_slave_1
[   74.680839][ T5930] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   74.691401][ T5930] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   74.729795][ T5928] batman_adv: batadv0: Adding interface: batadv_slave_0
[   74.732557][ T5928] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   74.742767][ T5928] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   74.755073][ T5928] batman_adv: batadv0: Adding interface: batadv_slave_1
[   74.757548][ T5928] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   74.766479][ T5928] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   74.812819][ T5930] hsr_slave_0: entered promiscuous mode
[   74.815234][ T5930] hsr_slave_1: entered promiscuous mode
[   74.818239][ T5930] debugfs: 'hsr0' already exists in 'hsr'
[   74.820091][ T5930] Cannot create hsr debugfs directory
[   74.904462][ T5928] hsr_slave_0: entered promiscuous mode
[   74.907697][ T5928] hsr_slave_1: entered promiscuous mode
[   74.910452][ T5928] debugfs: 'hsr0' already exists in 'hsr'
[   74.912315][ T5928] Cannot create hsr debugfs directory
[   75.091287][ T5925] netdevsim netdevsim1 netdevsim0: renamed from eth0
[   75.099240][ T5925] netdevsim netdevsim1 netdevsim1: renamed from eth1
[   75.128885][ T5925] netdevsim netdevsim1 netdevsim2: renamed from eth2
[   75.142473][ T5925] netdevsim netdevsim1 netdevsim3: renamed from eth3
[   75.244684][ T5930] netdevsim netdevsim2 netdevsim0: renamed from eth0
[   75.257744][ T5930] netdevsim netdevsim2 netdevsim1: renamed from eth1
[   75.269274][ T5930] netdevsim netdevsim2 netdevsim2: renamed from eth2
[   75.279162][ T5930] netdevsim netdevsim2 netdevsim3: renamed from eth3
[   75.368548][ T5928] netdevsim netdevsim0 netdevsim0: renamed from eth0
[   75.375714][ T5928] netdevsim netdevsim0 netdevsim1: renamed from eth1
[   75.384891][ T5928] netdevsim netdevsim0 netdevsim2: renamed from eth2
[   75.397682][ T5928] netdevsim netdevsim0 netdevsim3: renamed from eth3
[   75.444955][ T5925] 8021q: adding VLAN 0 to HW filter on device bond0
[   75.492709][ T5925] 8021q: adding VLAN 0 to HW filter on device team0
[   75.508871][ T1206] bridge0: port 1(bridge_slave_0) entered blocking state
[   75.511724][ T1206] bridge0: port 1(bridge_slave_0) entered forwarding state
[   75.533850][ T1206] bridge0: port 2(bridge_slave_1) entered blocking state
[   75.536886][ T1206] bridge0: port 2(bridge_slave_1) entered forwarding state
[   75.567306][ T5934] Bluetooth: hci0: command tx timeout
[   75.607390][ T5930] 8021q: adding VLAN 0 to HW filter on device bond0
[   75.642171][ T5930] 8021q: adding VLAN 0 to HW filter on device team0
[   75.647492][ T5934] Bluetooth: hci1: command tx timeout
[   75.656351][ T5934] Bluetooth: hci2: command tx timeout
[   75.668673][   T40] bridge0: port 1(bridge_slave_0) entered blocking state
[   75.671486][   T40] bridge0: port 1(bridge_slave_0) entered forwarding state
[   75.690582][   T40] bridge0: port 2(bridge_slave_1) entered blocking state
[   75.693532][   T40] bridge0: port 2(bridge_slave_1) entered forwarding state
[   75.704233][ T5928] 8021q: adding VLAN 0 to HW filter on device bond0
[   75.748920][ T5928] 8021q: adding VLAN 0 to HW filter on device team0
[   75.770991][   T40] bridge0: port 1(bridge_slave_0) entered blocking state
[   75.773261][   T40] bridge0: port 1(bridge_slave_0) entered forwarding state
[   75.784209][   T40] bridge0: port 2(bridge_slave_1) entered blocking state
[   75.786457][   T40] bridge0: port 2(bridge_slave_1) entered forwarding state
[   75.859135][ T5925] 8021q: adding VLAN 0 to HW filter on device batadv0
[   75.929954][ T5930] 8021q: adding VLAN 0 to HW filter on device batadv0
[   75.933630][ T5925] veth0_vlan: entered promiscuous mode
[   75.949402][ T5925] veth1_vlan: entered promiscuous mode
[   75.992821][ T5930] veth0_vlan: entered promiscuous mode
[   76.000486][ T5925] veth0_macvtap: entered promiscuous mode
[   76.014481][ T5930] veth1_vlan: entered promiscuous mode
[   76.020174][ T5925] veth1_macvtap: entered promiscuous mode
[   76.042946][ T5925] batman_adv: batadv0: Interface activated: batadv_slave_0
[   76.069255][ T5930] veth0_macvtap: entered promiscuous mode
[   76.075754][ T5925] batman_adv: batadv0: Interface activated: batadv_slave_1
[   76.088328][ T5930] veth1_macvtap: entered promiscuous mode
[   76.099354][ T5942] netdevsim netdevsim1 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   76.105280][ T5928] 8021q: adding VLAN 0 to HW filter on device batadv0
[   76.108549][ T5942] netdevsim netdevsim1 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   76.114401][ T5942] netdevsim netdevsim1 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   76.118510][ T5942] netdevsim netdevsim1 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   76.138039][ T5930] batman_adv: batadv0: Interface activated: batadv_slave_0
[   76.161642][ T5930] batman_adv: batadv0: Interface activated: batadv_slave_1
[   76.183312][ T5942] netdevsim netdevsim2 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   76.187552][ T5942] netdevsim netdevsim2 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   76.212584][ T5942] netdevsim netdevsim2 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   76.220432][ T5942] netdevsim netdevsim2 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   76.288979][ T1091] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   76.294894][ T5928] veth0_vlan: entered promiscuous mode
[   76.299698][ T1091] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   76.336900][ T5928] veth1_vlan: entered promiscuous mode
[   76.355178][ T1091] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   76.361961][ T1091] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   76.412713][ T1206] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   76.415686][ T1206] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   76.425167][ T5925] soft_limit_in_bytes is deprecated and will be removed. Please report your usecase to linux-mm@kvack.org if you depend on this functionality.
[   76.434295][ T5928] veth0_macvtap: entered promiscuous mode
[   76.445849][ T5928] veth1_macvtap: entered promiscuous mode
[   76.494988][ T5928] batman_adv: batadv0: Interface activated: batadv_slave_0
[   76.502459][ T1090] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   76.509720][ T1090] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   76.521415][ T5928] batman_adv: batadv0: Interface activated: batadv_slave_1
[   76.548411][   T12] netdevsim netdevsim0 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[   76.551126][   T12] netdevsim netdevsim0 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[   76.553922][   T12] netdevsim netdevsim0 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[   76.563350][   T12] netdevsim netdevsim0 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[   76.651117][   T90] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   76.653695][   T90] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   76.682166][   T90] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[   76.684704][   T90] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[   76.915595][ T6006] use of bytesused == 0 is deprecated and will be removed in the future,
[   76.919154][ T6006] use the actual size instead.
[   76.951003][ T6006] loop2: detected capacity change from 0 to 128
[   77.523638][ T6012] syz.2.69 uses obsolete (PF_INET,SOCK_PACKET)
[   77.649073][ T5934] Bluetooth: hci0: command tx timeout
[   77.729785][ T5926] Bluetooth: hci1: command tx timeout
[   77.729820][ T5934] Bluetooth: hci2: command tx timeout
[   78.874395][   T33] audit: type=1326 audit(1759223435.656:2): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6030 comm="syz.0.77" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   78.894839][   T33] audit: type=1326 audit(1759223435.676:3): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6030 comm="syz.0.77" exe="/syz-executor" sig=0 arch=c000003e syscall=449 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   78.926723][   T33] audit: type=1326 audit(1759223435.676:4): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6030 comm="syz.0.77" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   78.996786][   T33] audit: type=1326 audit(1759223435.676:5): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6030 comm="syz.0.77" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   79.084593][ T6036] loop2: detected capacity change from 0 to 22
[   79.094364][ T6036] MTD: Attempt to mount non-MTD device "/dev/loop2"
[   79.100929][ T6036] romfs: Mounting image 'rom 637cf1fa' through the block layer
[   79.511160][ T5974] libceph: connect (1)[c::]:6789 error -101
[   79.513988][ T5974] libceph: mon0 (1)[c::]:6789 connect error
[   79.519350][ T6060] ceph: No mds server is up or the cluster is laggy
[   79.639384][ T6067] loop2: detected capacity change from 0 to 4096
[   79.643273][ T6067] =======================================================
[   79.643273][ T6067] WARNING: The mand mount option has been deprecated and
[   79.643273][ T6067]          and is ignored by this kernel. Remove the mand
[   79.643273][ T6067]          option from the mount to silence this warning.
[   79.643273][ T6067] =======================================================
[   79.726821][ T5934] Bluetooth: hci0: command tx timeout
[   79.754824][ T6072] NILFS (loop2): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
[   79.773323][ T6067] NILFS error (device loop2): nilfs_bmap_lookup_contig: broken bmap (inode number=12)
[   79.779528][ T6067] Remounting filesystem read-only
[   79.781183][ T6071] loop0: detected capacity change from 0 to 4096
[   79.807672][ T5934] Bluetooth: hci2: command tx timeout
[   79.810532][ T6071] ntfs3(loop0): Different NTFS sector size (4096) and media sector size (512).
[   79.883733][ T6071] ntfs3(loop0): Failed to initialize $Secure::$SDH (-22).
[   79.887940][ T6071] ntfs3(loop0): Failed to initialize $Secure (-22).
[   80.069814][   T33] audit: type=1326 audit(1759223436.856:6): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6084 comm="syz.0.100" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   80.078672][   T33] audit: type=1326 audit(1759223436.856:7): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6084 comm="syz.0.100" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   80.088021][   T33] audit: type=1326 audit(1759223436.876:8): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6084 comm="syz.0.100" exe="/syz-executor" sig=0 arch=c000003e syscall=300 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   80.096937][   T33] audit: type=1326 audit(1759223436.876:9): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6084 comm="syz.0.100" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   80.107342][   T33] audit: type=1326 audit(1759223436.876:10): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6084 comm="syz.0.100" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   80.116407][   T33] audit: type=1326 audit(1759223436.876:11): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6084 comm="syz.0.100" exe="/syz-executor" sig=0 arch=c000003e syscall=257 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   80.152644][ T6087] loop0: detected capacity change from 0 to 164
[   80.177741][ T6087] rock: directory entry would overflow storage
[   80.180764][ T6087] rock: sig=0x66, size=4, remaining=3
[   80.191691][ T6087] rock: directory entry would overflow storage
[   80.199029][ T6087] rock: sig=0x66, size=4, remaining=3
[   80.414060][ T6093] loop0: detected capacity change from 0 to 8192
[   80.478393][ T6095] loop0: detected capacity change from 0 to 128
[   80.484700][ T6095] UDF-fs: error (device loop0): udf_read_tagged: read failed, block=256, location=256
[   80.489989][ T6095] UDF-fs: INFO Mounting volume 'LinuxUDF', timestamp 2022/11/22 14:59 (1000)
[   80.504709][ T6095] UDF-fs: error (device loop0): udf_bitmap_new_block: bitmap for partition 0 corrupted (block 264 marked as free, partition length is 40)
[   80.545067][ T6097] netlink: 8 bytes leftover after parsing attributes in process `syz.0.106'.
[   80.660743][ T6102] UDPLite6: UDP-Lite is deprecated and scheduled to be removed in 2025, please contact the netdev mailing list
[   81.108319][ T6106] loop2: detected capacity change from 0 to 4096
[   81.117677][ T6106] ntfs3(loop2): Different NTFS sector size (1024) and media sector size (512).
[   81.406445][ T5934] Bluetooth: hci1: command tx timeout
[   81.807953][ T5934] Bluetooth: hci0: command tx timeout
[   81.886627][ T5934] Bluetooth: hci2: command tx timeout
[   82.250182][ T6141] netlink: 12 bytes leftover after parsing attributes in process `syz.1.127'.
[   82.324666][ T6147] iommufd_mock iommufd_mock0: Adding to iommu group 0
[   82.639620][ T6157] loop2: detected capacity change from 0 to 2048
[   82.682523][ T6157] UDF-fs: INFO Mounting volume 'LinuxUDF', timestamp 2022/11/22 14:59 (1000)
[   82.699591][ T6163] netlink: 27 bytes leftover after parsing attributes in process `syz.1.135'.
[   83.758503][ T6167] Bluetooth: MGMT ver 1.23
[   83.983813][ T6181] loop0: detected capacity change from 0 to 256
[   84.019489][ T6181] FAT-fs (loop0): Directory bread(block 64) failed
[   84.027660][ T6181] FAT-fs (loop0): Directory bread(block 65) failed
[   84.033694][ T6181] FAT-fs (loop0): Directory bread(block 66) failed
[   84.043781][ T6181] FAT-fs (loop0): Directory bread(block 67) failed
[   84.047135][ T6181] FAT-fs (loop0): Directory bread(block 68) failed
[   84.049700][ T6181] FAT-fs (loop0): Directory bread(block 69) failed
[   84.052298][ T6181] FAT-fs (loop0): Directory bread(block 70) failed
[   84.066005][ T6181] FAT-fs (loop0): Directory bread(block 71) failed
[   84.068791][ T6181] FAT-fs (loop0): Directory bread(block 72) failed
[   84.071345][ T6181] FAT-fs (loop0): Directory bread(block 73) failed
[   84.299324][ T6177] loop2: detected capacity change from 0 to 32768
[   84.321520][ T6177] BTRFS: device fsid 395ef67a-297e-477c-816d-cd80a5b93e5d devid 1 transid 8 /dev/loop2 (7:2) scanned by syz.2.142 (6177)
[   84.424018][ T6177] BTRFS info (device loop2): first mount of filesystem 395ef67a-297e-477c-816d-cd80a5b93e5d
[   84.429710][ T6177] BTRFS info (device loop2): using sha256 (sha256-lib) checksum algorithm
[   84.718303][ T5989] usb 2-1: new low-speed USB device number 2 using dummy_hcd
[   84.812999][ T6177] BTRFS info (device loop2): enabling ssd optimizations
[   84.816988][ T6177] BTRFS info (device loop2): enabling free space tree
[   84.854292][ T5930] BTRFS info (device loop2): last unmount of filesystem 395ef67a-297e-477c-816d-cd80a5b93e5d
[   84.901177][ T5989] usb 2-1: config 65 has an invalid interface number: 95 but max is 0
[   84.913287][ T5989] usb 2-1: config 65 has no interface number 0
[   84.929512][ T5989] usb 2-1: string descriptor 0 read error: -22
[   84.934478][ T5989] usb 2-1: New USB device found, idVendor=0525, idProduct=a4a0, bcdDevice=6f.b6
[   84.943745][ T5989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   84.977597][ T5989] usbtest 2-1:65.95: Linux gadget zero
[   84.980532][ T5989] usbtest 2-1:65.95: low-speed {control in/out} tests (+alt)
[   85.248941][ T6213] loop0: detected capacity change from 0 to 128
[   85.263746][ T6215] binder: 6214:6215 ioctl c018620c 200000000380 returned -22
[   85.390229][ T5922] usb 2-1: USB disconnect, device number 2
[   85.494311][ T6230] netlink: 44 bytes leftover after parsing attributes in process `syz.2.158'.
[   85.554561][ T6232] loop2: detected capacity change from 0 to 4096
[   85.576447][ T6232] ntfs3(loop2): ino=b, mi_enum_attr
[   85.578641][ T6232] ntfs3(loop2): Mark volume as dirty due to NTFS errors
[   85.582773][ T6232] ntfs3(loop2): Failed to load $Extend (-22).
[   85.585122][ T6232] ntfs3(loop2): Failed to initialize $Extend.
[   85.601943][   T33] kauditd_printk_skb: 4 callbacks suppressed
[   85.601984][   T33] audit: type=1804 audit(1759223442.386:16): pid=6232 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz.2.159" name="/newroot/31/file1/file1" dev="loop2" ino=30 res=1 errno=0
[   85.602460][ T6232] ntfs3(loop2): ino=1e, "file1" attr_set_size
[   85.637109][ T5931] usb 1-1: new high-speed USB device number 2 using dummy_hcd
[   85.798047][ T5931] usb 1-1: Using ep0 maxpacket: 16
[   85.823884][ T5931] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[   85.828987][ T5931] usb 1-1: New USB device found, idVendor=04d8, idProduct=00dd, bcdDevice= 0.00
[   85.832363][ T5931] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   85.840705][ T5931] usb 1-1: config 0 descriptor??
[   85.926755][ T5922] usb 3-1: new high-speed USB device number 2 using dummy_hcd
[   86.077872][ T5922] usb 3-1: config 0 interface 0 altsetting 251 endpoint 0x9 has invalid wMaxPacketSize 0
[   86.081592][ T5922] usb 3-1: config 0 interface 0 has no altsetting 0
[   86.098858][ T5922] usb 3-1: New USB device found, idVendor=045e, idProduct=0283, bcdDevice=99.0b
[   86.102414][ T5922] usb 3-1: New USB device strings: Mfr=1, Product=228, SerialNumber=2
[   86.105361][ T5922] usb 3-1: Product: syz
[   86.107095][ T5922] usb 3-1: Manufacturer: syz
[   86.109081][ T5922] usb 3-1: SerialNumber: syz
[   86.113782][ T5922] usb 3-1: config 0 descriptor??
[   86.124026][ T5922] usb 3-1: selecting invalid altsetting 0
[   86.258797][ T5931] mcp2221 0003:04D8:00DD.0001: USB HID v0.05 Device [HID 04d8:00dd] on usb-dummy_hcd.0-1/input0
[   86.369319][ T5988] usb 3-1: USB disconnect, device number 2
[   86.451539][   T47] cfg80211: failed to load regulatory.db
[   86.666345][ T5988] usb 1-1: USB disconnect, device number 2
[   87.216356][ T5922] usb 2-1: new full-speed USB device number 3 using dummy_hcd
[   87.225859][ T6255] loop0: detected capacity change from 0 to 2048
[   87.279428][ T6239]  loop0: p3 p4 < >
[   87.281308][ T6239] loop0: p3 size 16777216 extends beyond EOD, truncated
[   87.294672][ T6255]  loop0: p3 p4 < >
[   87.296875][ T6255] loop0: p3 size 16777216 extends beyond EOD, truncated
[   87.310534][ T5295]  loop0: p3 p4 < >
[   87.312211][ T5295] loop0: p3 size 16777216 extends beyond EOD, truncated
[   87.360781][ T5936] udevd[5936]: inotify_add_watch(7, /dev/loop0p4, 10) failed: No such file or directory
[   87.368214][ T6239] udevd[6239]: inotify_add_watch(7, /dev/loop0p3, 10) failed: No such file or directory
[   87.384156][ T5922] usb 2-1: New USB device found, idVendor=0ccd, idProduct=00b3, bcdDevice=2d.ea
[   87.389075][ T5922] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   87.392233][ T5922] usb 2-1: Product: syz
[   87.393964][ T5922] usb 2-1: Manufacturer: syz
[   87.395857][ T5922] usb 2-1: SerialNumber: syz
[   87.406128][ T5988] usb 3-1: new high-speed USB device number 3 using dummy_hcd
[   87.406873][ T5936] udevd[5936]: inotify_add_watch(7, /dev/loop0p4, 10) failed: No such file or directory
[   87.420456][ T6239] udevd[6239]: inotify_add_watch(7, /dev/loop0p3, 10) failed: No such file or directory
[   87.426429][ T5922] usb 2-1: config 0 descriptor??
[   87.450415][ T5936] udevd[5936]: inotify_add_watch(7, /dev/loop0p4, 10) failed: No such file or directory
[   87.452620][ T6239] udevd[6239]: inotify_add_watch(7, /dev/loop0p3, 10) failed: No such file or directory
[   87.570561][ T5988] usb 3-1: Using ep0 maxpacket: 8
[   87.574447][ T5988] usb 3-1: config 162 has an invalid interface number: 166 but max is 0
[   87.577392][ T5988] usb 3-1: config 162 has an invalid descriptor of length 0, skipping remainder of the config
[   87.582634][ T5988] usb 3-1: config 162 has no interface number 0
[   87.585710][ T5988] usb 3-1: config 162 interface 166 altsetting 1 endpoint 0x3 has invalid wMaxPacketSize 0
[   87.589634][ T5988] usb 3-1: config 162 interface 166 altsetting 1 has 1 endpoint descriptor, different from the interface descriptor's value: 2
[   87.595061][ T5988] usb 3-1: config 162 interface 166 has no altsetting 0
[   87.610254][ T5988] usb 3-1: New USB device found, idVendor=05ac, idProduct=921d, bcdDevice=d3.ea
[   87.613685][ T5988] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   87.619841][ T5988] usb 3-1: Product: syz
[   87.621508][ T5988] usb 3-1: Manufacturer: syz
[   87.623356][ T5988] usb 3-1: SerialNumber: syz
[   87.882871][ T5988] appledisplay 3-1:162.166: Could not find int-in endpoint
[   87.910877][ T5988] usbhid 3-1:162.166: couldn't find an input interrupt endpoint
[   87.932356][ T5988] usb 3-1: USB disconnect, device number 3
[   87.962367][ T6265] loop0: detected capacity change from 0 to 128
[   87.995313][ T6265] EXT4-fs (loop0): mounted filesystem 76b65be2-f6da-4727-8c75-0525a5b65a09 r/w without journal. Quota mode: none.
[   88.020274][ T6265] ext4 filesystem being mounted at /45/mnt supports timestamps until 2038-01-19 (0x7fffffff)
[   88.108069][ T5928] EXT4-fs (loop0): unmounting filesystem 76b65be2-f6da-4727-8c75-0525a5b65a09.
[   88.386014][ T5988] usb 1-1: new full-speed USB device number 3 using dummy_hcd
[   88.459865][ T5922] dvb_usb_rtl28xxu 2-1:0.0: chip type detection failed -110
[   88.463497][ T5922] dvb_usb_rtl28xxu 2-1:0.0: probe with driver dvb_usb_rtl28xxu failed with error -110
[   88.484729][ T6273] UDF-fs: error (device nbd2): udf_read_tagged: read failed, block=256, location=256
[   88.489380][ T6273] UDF-fs: error (device nbd2): udf_read_tagged: read failed, block=512, location=512
[   88.493865][ T6273] UDF-fs: error (device nbd2): udf_read_tagged: read failed, block=256, location=256
[   88.497554][ T6273] UDF-fs: error (device nbd2): udf_read_tagged: read failed, block=512, location=512
[   88.502922][ T6273] UDF-fs: error (device nbd2): udf_read_tagged: read failed, block=256, location=256
[   88.507246][ T6273] UDF-fs: error (device nbd2): udf_read_tagged: read failed, block=512, location=512
[   88.511729][ T6273] UDF-fs: error (device nbd2): udf_read_tagged: read failed, block=256, location=256
[   88.515635][ T6273] UDF-fs: error (device nbd2): udf_read_tagged: read failed, block=512, location=512
[   88.520368][ T6273] UDF-fs: warning (device nbd2): udf_fill_super: No partition found (1)
[   88.537450][ T5988] usb 1-1: New USB device found, idVendor=09c0, idProduct=0203, bcdDevice=d3.43
[   88.541024][ T5988] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[   88.547416][ T5988] usb 1-1: config 0 descriptor??
[   88.561561][ T5988] dvb-usb: found a 'Genpix SkyWalker-1 DVB-S receiver' in warm state.
[   88.629976][ T6277] process 'syz.2.179' launched '/dev/fd/4' with NULL argv: empty string added
[   88.767227][ T5988] gp8psk: usb in 128 operation failed.
[   88.973072][ T5988] gp8psk: FW Version = 0.00.0 (0x0)  Build 2000/00/00
[   89.178043][ T5988] gp8psk: usb in 149 operation failed.
[   89.180276][ T5988] gp8psk: failed to get FPGA version
[   89.188569][ T5988] gp8psk: usb in 138 operation failed.
[   89.190780][ T5988] dvb-usb: This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)
[   89.194949][ T5988] dvb-usb: Genpix SkyWalker-1 DVB-S receiver error while loading driver (-19)
[   89.206480][ T5988] usb 1-1: USB disconnect, device number 3
[   90.006189][ T5988] usb 2-1: USB disconnect, device number 3
[   90.027330][ T5931] usb 1-1: new high-speed USB device number 4 using dummy_hcd
[   90.176124][ T5931] usb 1-1: Using ep0 maxpacket: 8
[   90.183380][ T5931] usb 1-1: New USB device found, idVendor=110a, idProduct=1450, bcdDevice=62.cb
[   90.187772][ T5931] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   90.190960][ T5931] usb 1-1: Product: syz
[   90.192722][ T5931] usb 1-1: Manufacturer: syz
[   90.196264][ T5931] usb 1-1: SerialNumber: syz
[   90.281181][ T6301] loop1: detected capacity change from 0 to 2048
[   90.298970][ T6301] UDF-fs: error (device loop1): udf_read_tagged: tag version 0x0000 != 0x0002 || 0x0003, block 0
[   90.310763][ T6301] UDF-fs: warning (device loop1): udf_load_vrs: No anchor found
[   90.313714][ T6301] UDF-fs: warning (device loop1): udf_fill_super: No partition found (1)
[   90.422130][ T5931] mxuport 1-1:254.0: mxuport_send_ctrl_data_urb - usb_control_msg failed (-71)
[   90.431941][ T5931] mxuport 1-1:254.0: mxuport_send_ctrl_data_urb - usb_control_msg failed (-71)
[   90.437089][ T5931] mxuport 1-1:254.0: probe with driver mxuport failed with error -71
[   90.459286][ T5931] usb 1-1: USB disconnect, device number 4
[   91.033890][ T6314] binder: transaction release 5 bad handle 1, ret = -22
[   91.518874][   T33] audit: type=1326 audit(1759223448.256:17): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6308 comm="syz.2.193" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f99f118ec29 code=0x7fc00000
[   91.577557][   T33] audit: type=1326 audit(1759223448.266:18): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6308 comm="syz.2.193" exe="/syz-executor" sig=0 arch=c000003e syscall=41 compat=0 ip=0x7f99f118ec29 code=0x7fc00000
[   91.642745][   T33] audit: type=1326 audit(1759223448.286:19): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6308 comm="syz.2.193" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f99f118ec29 code=0x7fc00000
[   91.735479][ T6326] loop1: detected capacity change from 0 to 164
[   91.740231][ T6325] netlink: 'syz.2.200': attribute type 2 has an invalid length.
[   91.745375][ T6325] netlink: 'syz.2.200': attribute type 2 has an invalid length.
[   91.815064][ T6328] netlink: 536 bytes leftover after parsing attributes in process `syz.2.201'.
[   91.867640][ T5925] iso9660: Corrupted directory entry in block 2 of inode 1920
[   91.882518][ T5925] iso9660: Corrupted directory entry in block 2 of inode 1920
[   91.893286][ T5925] iso9660: Corrupted directory entry in block 2 of inode 1920
[   91.898352][ T5925] iso9660: Corrupted directory entry in block 2 of inode 1920
[   91.910802][ T6330] netlink: 8 bytes leftover after parsing attributes in process `syz.2.202'.
[   92.565650][   T33] audit: type=1326 audit(1759223449.246:20): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6340 comm="syz.0.208" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   92.582944][   T33] audit: type=1326 audit(1759223449.246:21): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6340 comm="syz.0.208" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   92.616086][   T33] audit: type=1326 audit(1759223449.256:22): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6340 comm="syz.0.208" exe="/syz-executor" sig=0 arch=c000003e syscall=2 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   92.658347][   T33] audit: type=1326 audit(1759223449.256:23): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6340 comm="syz.0.208" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   92.691498][   T33] audit: type=1326 audit(1759223449.256:24): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6340 comm="syz.0.208" exe="/syz-executor" sig=0 arch=c000003e syscall=18 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   92.726403][   T33] audit: type=1326 audit(1759223449.256:25): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6340 comm="syz.0.208" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[   92.817387][ T6347] netlink: 8 bytes leftover after parsing attributes in process `syz.2.211'.
[   92.820868][ T6347] netlink: 12 bytes leftover after parsing attributes in process `syz.2.211'.
[   92.897712][ T6349] loop0: detected capacity change from 0 to 1024
[   92.950692][ T6349] EXT4-fs (loop0): mounted filesystem 00000000-0000-0006-0000-000000000000 r/w without journal. Quota mode: none.
[   92.954814][ T6349] ext4 filesystem being mounted at /59/file1 supports timestamps until 2038-01-19 (0x7fffffff)
[   92.960888][ T6353] loop2: detected capacity change from 0 to 65
[   92.983135][ T6353] BFS-fs: bfs_fill_super(): NOTE: filesystem loop2 was created with 512 inodes, the real maximum is 511, mounting anyway
[   93.001832][ T6349] EXT4-fs error (device loop0): ext4_mb_generate_buddy:1289: group 0, block bitmap and bg descriptor inconsistent: 21 vs 268369941 free clusters
[   93.018765][ T6349] EXT4-fs (loop0): Delayed block allocation failed for inode 15 at logical offset 32 with max blocks 1 with error 28
[   93.033535][ T6349] EXT4-fs (loop0): This should not happen!! Data will be lost
[   93.033535][ T6349] 
[   93.039544][ T6349] EXT4-fs (loop0): Total free blocks count 0
[   93.041364][ T6349] EXT4-fs (loop0): Free/Dirty block details
[   93.043182][ T6349] EXT4-fs (loop0): free_blocks=4293918720
[   93.052957][ T6349] EXT4-fs (loop0): dirty_blocks=16
[   93.054534][ T6349] EXT4-fs (loop0): Block reservation details
[   93.066092][ T6349] EXT4-fs (loop0): i_reserved_data_blocks=1
[   93.089775][ T6355] EXT4-fs error (device loop0): ext4_map_blocks:814: inode #15: comm syz.0.212: lblock 0 mapped to illegal pblock 0 (length 4)
[   93.098674][ T6355] EXT4-fs error (device loop0): ext4_ext_remove_space:2955: inode #15: comm syz.0.212: pblk 0 bad header/extent: invalid extent entries - magic f30a, entries 2, max 4(4), depth 0(0)
[   93.112538][ T6349] EXT4-fs error (device loop0): ext4_map_blocks:814: inode #15: block 3: comm syz.0.212: lblock 3 mapped to illegal pblock 3 (length 1)
[   93.142543][ T6349] EXT4-fs (loop0): Delayed block allocation failed for inode 15 at logical offset 3 with max blocks 1 with error 117
[   93.253620][ T5942] netdevsim netdevsim1 netdevsim3 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   93.463588][ T5942] netdevsim netdevsim1 netdevsim2 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   93.535192][ T5942] netdevsim netdevsim1 netdevsim1 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   93.535400][ T6364] netlink: 16 bytes leftover after parsing attributes in process `syz.0.218'.
[   93.612183][ T5942] netdevsim netdevsim1 netdevsim0 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[   93.724160][ T6372] loop2: detected capacity change from 0 to 4096
[   93.769898][ T6373] NILFS (loop2): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
[   94.311310][ T5942] bridge_slave_1: left allmulticast mode
[   94.328242][ T5942] bridge_slave_1: left promiscuous mode
[   94.342688][ T5942] bridge0: port 2(bridge_slave_1) entered disabled state
[   94.367170][ T5926] Bluetooth: hci0: unexpected cc 0x0c03 length: 249 > 1
[   94.372756][ T5926] Bluetooth: hci0: unexpected cc 0x1003 length: 249 > 9
[   94.376489][ T5926] Bluetooth: hci0: unexpected cc 0x1001 length: 249 > 9
[   94.377402][ T5942] bridge_slave_0: left allmulticast mode
[   94.387523][ T5926] Bluetooth: hci0: unexpected cc 0x0c23 length: 249 > 4
[   94.390582][ T5942] bridge_slave_0: left promiscuous mode
[   94.396296][ T5926] Bluetooth: hci0: unexpected cc 0x0c38 length: 249 > 2
[   94.421234][ T5942] bridge0: port 1(bridge_slave_0) entered disabled state
[   95.276008][ T5974] usb 3-1: new high-speed USB device number 4 using dummy_hcd
[   95.364325][ T5942] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[   95.370819][ T5942] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[   95.375785][ T5942] bond0 (unregistering): Released all slaves
[   95.436891][ T5974] usb 3-1: Using ep0 maxpacket: 8
[   95.447763][ T5974] usb 3-1: config 0 has an invalid interface number: 38 but max is 0
[   95.452173][ T5974] usb 3-1: config 0 has no interface number 0
[   95.545075][ T5974] usb 3-1: New USB device found, idVendor=093a, idProduct=2601, bcdDevice=7e.a5
[   95.553257][ T5974] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   95.558024][ T5974] usb 3-1: Product: syz
[   95.559684][ T5974] usb 3-1: Manufacturer: syz
[   95.563623][ T5974] usb 3-1: SerialNumber: syz
[   95.591477][ T5974] usb 3-1: config 0 descriptor??
[   95.619018][ T5974] gspca_main: pac7311-2.14.0 probing 093a:2601
[   95.804806][ T5974] gspca_pac7311: reg_w() failed index 0xff, value 0x01, error -71
[   95.817544][ T5974] pac7311 3-1:0.38: probe with driver pac7311 failed with error -71
[   95.833338][ T5974] usb 3-1: USB disconnect, device number 4
[   95.856982][ T6378] chnl_net:caif_netlink_parms(): no params data found
[   95.931142][ T6409] netlink: 5 bytes leftover after parsing attributes in process `syz.0.230'.
[   95.965574][ T6409] A link change request failed with some changes committed already. Interface lo may have been left with an inconsistent configuration, please check.
[   96.022802][ T5942] hsr_slave_0: left promiscuous mode
[   96.029701][ T5942] hsr_slave_1: left promiscuous mode
[   96.032133][ T5942] batman_adv: batadv0: Interface deactivated: batadv_slave_0
[   96.034957][ T5942] batman_adv: batadv0: Removing interface: batadv_slave_0
[   96.039389][ T5942] batman_adv: batadv0: Interface deactivated: batadv_slave_1
[   96.042079][ T5942] batman_adv: batadv0: Removing interface: batadv_slave_1
[   96.057187][ T5942] veth1_macvtap: left promiscuous mode
[   96.059183][ T5942] veth0_macvtap: left promiscuous mode
[   96.060979][ T5942] veth1_vlan: left promiscuous mode
[   96.062755][ T5942] veth0_vlan: left promiscuous mode
[   96.426641][ T5942] team0 (unregistering): Port device team_slave_1 removed
[   96.446519][ T5926] Bluetooth: hci0: command tx timeout
[   96.464151][ T5942] team0 (unregistering): Port device team_slave_0 removed
[   97.268142][ T6378] bridge0: port 1(bridge_slave_0) entered blocking state
[   97.271038][ T6378] bridge0: port 1(bridge_slave_0) entered disabled state
[   97.285539][ T6378] bridge_slave_0: entered allmulticast mode
[   97.290009][ T6378] bridge_slave_0: entered promiscuous mode
[   97.300749][ T6378] bridge0: port 2(bridge_slave_1) entered blocking state
[   97.305052][ T6378] bridge0: port 2(bridge_slave_1) entered disabled state
[   97.310148][ T6378] bridge_slave_1: entered allmulticast mode
[   97.314450][ T6378] bridge_slave_1: entered promiscuous mode
[   97.377458][ T6429] loop0: detected capacity change from 0 to 512
[   97.383111][ T6378] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[   97.390090][ T6429] EXT4-fs: Warning: mounting with data=journal disables delayed allocation, dioread_nolock, O_DIRECT and fast_commit support!
[   97.401758][ T6378] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[   97.404032][ T6429] EXT4-fs (loop0): encrypted files will use data=ordered instead of data journaling mode
[   97.425747][ T6429] EXT4-fs warning (device loop0): ext4_expand_extra_isize_ea:2853: Unable to expand inode 15. Delete some EAs or run e2fsck.
[   97.438982][ T6429] EXT4-fs (loop0): 1 truncate cleaned up
[   97.443646][ T6429] EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[   97.510656][ T6378] team0: Port device team_slave_0 added
[   97.557389][ T6378] team0: Port device team_slave_1 added
[   97.764540][ T6378] batman_adv: batadv0: Adding interface: batadv_slave_0
[   97.769375][ T6378] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   97.782478][ T6378] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[   97.800815][ T6378] batman_adv: batadv0: Adding interface: batadv_slave_1
[   97.804190][ T6378] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[   97.816410][ T6378] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[   97.979564][ T6378] hsr_slave_0: entered promiscuous mode
[   97.984592][ T6378] hsr_slave_1: entered promiscuous mode
[   98.526285][ T5926] Bluetooth: hci0: command tx timeout
[   98.920106][ T5928] EXT4-fs (loop0): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[   98.923660][ T6378] netdevsim netdevsim3 netdevsim0: renamed from eth0
[   98.942689][ T6378] netdevsim netdevsim3 netdevsim1: renamed from eth1
[   98.951882][ T6378] netdevsim netdevsim3 netdevsim2: renamed from eth2
[   98.979757][ T6378] netdevsim netdevsim3 netdevsim3: renamed from eth3
[   99.544397][ T6378] 8021q: adding VLAN 0 to HW filter on device bond0
[   99.557083][ T6378] 8021q: adding VLAN 0 to HW filter on device team0
[   99.563836][   T65] bridge0: port 1(bridge_slave_0) entered blocking state
[   99.566791][   T65] bridge0: port 1(bridge_slave_0) entered forwarding state
[   99.595072][   T65] bridge0: port 2(bridge_slave_1) entered blocking state
[   99.597897][   T65] bridge0: port 2(bridge_slave_1) entered forwarding state
[   99.694141][ T6472] Invalid ELF header magic: != ELF
[  100.342541][ T6378] 8021q: adding VLAN 0 to HW filter on device batadv0
[  100.606275][ T5926] Bluetooth: hci0: command tx timeout
[  100.631743][ T6378] veth0_vlan: entered promiscuous mode
[  100.659161][ T6378] veth1_vlan: entered promiscuous mode
[  100.739982][ T6378] veth0_macvtap: entered promiscuous mode
[  100.752096][ T6378] veth1_macvtap: entered promiscuous mode
[  100.792700][ T6378] batman_adv: batadv0: Interface activated: batadv_slave_0
[  100.821797][ T6378] batman_adv: batadv0: Interface activated: batadv_slave_1
[  100.843717][   T13] netdevsim netdevsim3 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[  100.876214][   T13] netdevsim netdevsim3 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[  100.882162][   T13] netdevsim netdevsim3 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[  100.901466][   T13] netdevsim netdevsim3 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[  101.101477][ T6487] usb usb1: usbfs: process 6487 (syz.0.246) did not claim interface 4 before use
[  101.193590][   T65] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[  101.201313][   T65] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[  101.269770][   T26] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[  101.273081][   T26] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[  101.542171][ T6507] loop2: detected capacity change from 0 to 2048
[  101.568679][ T6509] NILFS (loop2): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
[  102.299782][ T6530] loop2: detected capacity change from 0 to 32768
[  102.690493][ T5926] Bluetooth: hci0: command tx timeout
[  102.789501][ T6583] loop3: detected capacity change from 0 to 32768
[  102.798404][ T6583] BTRFS: device fsid 395ef67a-297e-477c-816d-cd80a5b93e5d devid 1 transid 8 /dev/loop3 (7:3) scanned by syz.3.259 (6583)
[  102.807140][ T6583] BTRFS info (device loop3): first mount of filesystem 395ef67a-297e-477c-816d-cd80a5b93e5d
[  102.810536][ T6583] BTRFS info (device loop3): using sha256 (sha256-lib) checksum algorithm
[  102.844309][ T6583] BTRFS info (device loop3): enabling ssd optimizations
[  102.848999][ T6583] BTRFS info (device loop3): enabling free space tree
[  102.900095][ T6378] BTRFS info (device loop3): last unmount of filesystem 395ef67a-297e-477c-816d-cd80a5b93e5d
[  102.906338][ T5974] usb 1-1: new high-speed USB device number 5 using dummy_hcd
[  103.016151][ T6603] loop3: detected capacity change from 0 to 512
[  103.069558][ T5974] usb 1-1: Using ep0 maxpacket: 32
[  103.088753][ T5974] usb 1-1: config 0 has an invalid interface number: 12 but max is 0
[  103.091988][ T5974] usb 1-1: config 0 has no interface number 0
[  103.094449][ T5974] usb 1-1: config 0 interface 12 has no altsetting 0
[  103.108513][ T5974] usb 1-1: New USB device found, idVendor=2c42, idProduct=1202, bcdDevice=85.40
[  103.113272][ T6603] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  103.116685][ T5974] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  103.125666][ T6603] ext4 filesystem being mounted at /3/file1 supports timestamps until 2038-01-19 (0x7fffffff)
[  103.127232][ T5974] usb 1-1: Product: syz
[  103.137090][ T5974] usb 1-1: Manufacturer: syz
[  103.139058][ T5974] usb 1-1: SerialNumber: syz
[  103.156264][ T5974] usb 1-1: config 0 descriptor??
[  103.235311][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  104.642675][ T6622] capability: warning: `syz.3.265' uses 32-bit capabilities (legacy support in use)
[  104.842782][ T6634] netlink: 64 bytes leftover after parsing attributes in process `syz.3.272'.
[  104.925257][ T6637] loop3: detected capacity change from 0 to 2048
[  104.945744][ T6637] UDF-fs: INFO Mounting volume 'LiuxUDF', timestamp 2022/11/22 14:59 (1000)
[  105.232352][ T5974] f81534 1-1:0.12: f81534_set_register: reg: 1002 data: 0 failed: -71
[  105.235817][ T5974] f81534 1-1:0.12: f81534_find_config_idx: read failed: -71
[  105.246202][ T5974] f81534 1-1:0.12: f81534_calc_num_ports: find idx failed: -71
[  105.249170][ T5974] f81534 1-1:0.12: probe with driver f81534 failed with error -71
[  105.256356][ T6648] semctl(GETNCNT/GETZCNT) is since 3.16 Single Unix Specification compliant.
[  105.256356][ T6648] The task syz.3.278 (6648) triggered the difference, watch for misbehavior.
[  105.268060][ T5974] usb 1-1: USB disconnect, device number 5
[  105.362953][ T6651] netlink: 44 bytes leftover after parsing attributes in process `syz.2.279'.
[  105.366952][ T6651] netlink: 24 bytes leftover after parsing attributes in process `syz.2.279'.
[  106.158631][ T6673] pim6reg0: tun_chr_ioctl cmd 1074812118
[  106.384149][ T6683] (unnamed net_device) (uninitialized): option broadcast_neighbor: mode dependency failed, not supported in mode balance-rr(0)
[  106.549712][ T6693] loop2: detected capacity change from 0 to 164
[  106.607764][ T5989] usb 4-1: new high-speed USB device number 2 using dummy_hcd
[  106.669213][ T6703] netlink: 256 bytes leftover after parsing attributes in process `syz.0.300'.
[  106.718250][ T6705] loop0: detected capacity change from 0 to 2048
[  106.766450][ T5989] usb 4-1: Using ep0 maxpacket: 8
[  106.768720][ T6707] veth0: entered promiscuous mode
[  106.770098][ T5989] usb 4-1: config 0 interface 0 altsetting 0 has an invalid descriptor for endpoint zero, skipping
[  106.773306][ T5989] usb 4-1: config 0 interface 0 altsetting 0 has an endpoint descriptor with address 0x94, changing to 0x84
[  106.782568][ T6707] veth0: left promiscuous mode
[  106.784605][ T5989] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x84 has an invalid bInterval 239, changing to 11
[  106.803953][ T5989] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x84 has invalid maxpacket 9059, setting to 1024
[  106.812962][ T5989] usb 4-1: config 0 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 1
[  106.820647][ T5989] usb 4-1: New USB device found, idVendor=04e8, idProduct=ff30, bcdDevice=a6.d1
[  106.823897][ T5989] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  106.826653][ T5989] usb 4-1: Product: syz
[  106.828018][ T5989] usb 4-1: Manufacturer: syz
[  106.829766][ T5989] usb 4-1: SerialNumber: syz
[  106.843079][ T5989] usb 4-1: config 0 descriptor??
[  106.886063][ T5989] rc_core: IR keymap rc-imon-rsc not found
[  106.888326][ T5989] Registered IR keymap rc-empty
[  106.897076][ T5974] usb 3-1: new high-speed USB device number 5 using dummy_hcd
[  106.900954][ T5989] rc rc0: iMON Station as /devices/platform/dummy_hcd.3/usb4/4-1/4-1:0.0/rc/rc0
[  106.922791][ T5989] input: iMON Station as /devices/platform/dummy_hcd.3/usb4/4-1/4-1:0.0/rc/rc0/input4
[  107.091333][   T33] audit: type=1326 audit(1759223463.856:26): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6717 comm="syz.0.305" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[  107.100817][ T5974] usb 3-1: Using ep0 maxpacket: 8
[  107.124772][ T5974] usb 3-1: New USB device found, idVendor=22b8, idProduct=6425, bcdDevice=d3.6c
[  107.125657][   T33] audit: type=1326 audit(1759223463.856:27): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6717 comm="syz.0.305" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[  107.128285][ T5931] usb 4-1: USB disconnect, device number 2
[  107.136057][   T33] audit: type=1326 audit(1759223463.866:28): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6717 comm="syz.0.305" exe="/syz-executor" sig=0 arch=c000003e syscall=79 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[  107.143221][ T5974] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  107.146521][   T33] audit: type=1326 audit(1759223463.866:29): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6717 comm="syz.0.305" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[  107.154647][ T5974] usb 3-1: Product: syz
[  107.162228][   T33] audit: type=1326 audit(1759223463.866:30): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6717 comm="syz.0.305" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x7ffc0000
[  107.167424][ T5974] usb 3-1: Manufacturer: syz
[  107.181368][ T5974] usb 3-1: SerialNumber: syz
[  107.194666][ T5974] usb 3-1: config 0 descriptor??
[  107.199511][ T6720] loop0: detected capacity change from 0 to 736
[  107.210884][ T5974] usb 3-1: bad CDC descriptors
[  107.222242][ T5974] usb 3-1: unsupported MDLM descriptors
[  107.414302][ T5931] usb 3-1: USB disconnect, device number 5
[  107.481672][ T6728] netlink: 16 bytes leftover after parsing attributes in process `syz.0.310'.
[  108.262115][ T6739] netlink: 32 bytes leftover after parsing attributes in process `syz.2.313'.
[  108.400313][ T6743] netlink: 8 bytes leftover after parsing attributes in process `syz.2.315'.
[  108.403789][ T6743] netlink: 28 bytes leftover after parsing attributes in process `syz.2.315'.
[  108.851218][ T6760] loop0: detected capacity change from 0 to 512
[  108.879978][ T6760] [EXT4 FS bs=1024, gc=1, bpg=8192, ipg=32, mo=a843c198, mo2=0002]
[  108.885754][ T6760] System zones: 1-12
[  108.894223][ T6760] EXT4-fs error (device loop0): ext4_iget_extra_inode:5075: inode #15: comm syz.0.323: corrupted in-inode xattr: e_value size too large
[  108.903550][ T6760] EXT4-fs error (device loop0): ext4_orphan_get:1397: comm syz.0.323: couldn't read orphan inode 15 (err -117)
[  108.909900][ T6760] EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
[  108.949725][ T5928] EXT4-fs (loop0): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  109.124977][ T6772] mac80211_hwsim: wmediumd released netlink socket, switching to perfect channel medium
[  109.137251][ T6772] mac80211_hwsim: wmediumd released netlink socket, switching to perfect channel medium
[  109.152983][ T5931] usb 4-1: new high-speed USB device number 3 using dummy_hcd
[  109.312014][ T5931] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 255, changing to 11
[  109.320907][ T5931] usb 4-1: New USB device found, idVendor=046d, idProduct=c626, bcdDevice= 0.00
[  109.324388][ T5931] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  109.333203][ T5931] usb 4-1: config 0 descriptor??
[  109.495659][ T6781] loop0: detected capacity change from 0 to 1764
[  109.525126][ T6781] iso9660: Corrupted directory entry in block 2 of inode 1920
[  109.770607][ T5931] logitech 0003:046D:C626.0002: hidraw0: USB HID v0.00 Device [HID 046d:c626] on usb-dummy_hcd.3-1/input0
[  109.964380][   T47] usb 4-1: USB disconnect, device number 3
[  110.102076][ T6791] loop2: detected capacity change from 0 to 32768
[  110.122201][ T6791] XFS (loop2): Mounting V5 Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791
[  110.157116][ T6791] XFS (loop2): Ending clean mount
[  110.165772][ T6791] XFS (loop2): Quotacheck needed: Please wait.
[  110.176005][ T5931] usb 1-1: new high-speed USB device number 6 using dummy_hcd
[  110.194771][ T6791] XFS (loop2): Quotacheck: Done.
[  110.251792][ T5930] XFS (loop2): Unmounting Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791
[  110.326003][ T5931] usb 1-1: Using ep0 maxpacket: 16
[  110.331304][ T5931] usb 1-1: config 0 has an invalid interface number: 132 but max is 0
[  110.334450][ T5931] usb 1-1: config 0 has no interface number 0
[  110.348935][ T5931] usb 1-1: New USB device found, idVendor=05ac, idProduct=0291, bcdDevice=43.25
[  110.353952][ T5931] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  110.364108][ T5931] usb 1-1: Product: syz
[  110.365831][ T5931] usb 1-1: Manufacturer: syz
[  110.372580][ T5931] usb 1-1: SerialNumber: syz
[  110.385463][ T5931] usb 1-1: config 0 descriptor??
[  110.391725][ T5931] hub 1-1:0.132: bad descriptor, ignoring hub
[  110.394130][ T5931] hub 1-1:0.132: probe with driver hub failed with error -5
[  110.412313][ T5931] input: bcm5974 as /devices/platform/dummy_hcd.0/usb1/1-1/1-1:0.132/input/input5
[  110.741089][ T6833] netlink: 'syz.3.345': attribute type 31 has an invalid length.
[  110.864358][ T6840] No source specified
[  110.876346][   T10] usb 3-1: new full-speed USB device number 6 using dummy_hcd
[  110.897212][ T6842] sctp: [Deprecated]: syz.3.349 (pid 6842) Use of int in max_burst socket option.
[  110.897212][ T6842] Use struct sctp_assoc_value instead
[  111.038186][   T10] usb 3-1: config 0 has an invalid interface number: 189 but max is 0
[  111.041660][   T10] usb 3-1: config 0 has no interface number 0
[  111.044191][   T10] usb 3-1: config 0 interface 189 altsetting 0 has an invalid descriptor for endpoint zero, skipping
[  111.048561][   T10] usb 3-1: config 0 interface 189 altsetting 0 has an endpoint descriptor with address 0xE3, changing to 0x83
[  111.055364][   T10] usb 3-1: config 0 interface 189 altsetting 0 endpoint 0x83 has invalid maxpacket 33307, setting to 64
[  111.059957][   T10] usb 3-1: config 0 interface 189 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[  111.063817][   T10] usb 3-1: config 0 interface 189 altsetting 0 has 3 endpoint descriptors, different from the interface descriptor's value: 2
[  111.082588][   T10] usb 3-1: New USB device found, idVendor=07b4, idProduct=010a, bcdDevice= 1.02
[  111.096076][   T10] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  111.099359][   T10] usb 3-1: Product: syz
[  111.101066][   T10] usb 3-1: Manufacturer: syz
[  111.102969][   T10] usb 3-1: SerialNumber: syz
[  111.115117][   T10] usb 3-1: config 0 descriptor??
[  111.118571][ T6827] raw-gadget.0 gadget.2: fail, usb_ep_enable returned -22
[  111.128351][   T10] ums-alauda 3-1:0.189: USB Mass Storage device detected
[  111.163668][   T10] scsi host6: usb-storage 3-1:0.189
[  111.201330][ T6855] loop3: detected capacity change from 0 to 128
[  111.205108][ T6855] vfat: Unexpected value for 'dos1xfloppy'
[  111.312751][ T6859] netlink: 8 bytes leftover after parsing attributes in process `syz.3.352'.
[  111.345960][ T5922] usb 3-1: USB disconnect, device number 6
[  111.657496][ T6871] netlink: 24 bytes leftover after parsing attributes in process `syz.3.357'.
[  112.661311][ T6887] loop3: detected capacity change from 0 to 512
[  112.669244][ T6887] EXT4-fs: Ignoring removed i_version option
[  112.675806][ T6887] EXT4-fs: Journaled quota options ignored when QUOTA feature is enabled
[  112.708948][ T6887] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  112.734141][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  113.809089][ T6897] loop3: detected capacity change from 0 to 32768
[  113.815205][ T6897] btrfs: Unknown parameter 'ref_verify'
[  114.018969][ T5931] usb 1-1: USB disconnect, device number 6
[  114.607690][ T5931] usb 1-1: new full-speed USB device number 7 using dummy_hcd
[  114.757880][ T5931] usb 1-1: config 0 has an invalid descriptor of length 0, skipping remainder of the config
[  114.761826][ T5931] usb 1-1: config 0 interface 0 altsetting 0 has an endpoint descriptor with address 0x61, changing to 0x1
[  114.766586][ T5931] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x1 has an invalid bInterval 0, changing to 10
[  114.770892][ T5931] usb 1-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 5
[  114.780630][ T5931] usb 1-1: New USB device found, idVendor=2040, idProduct=b138, bcdDevice= 1.42
[  114.784219][ T5931] usb 1-1: New USB device strings: Mfr=4, Product=0, SerialNumber=0
[  114.788220][ T5931] usb 1-1: Manufacturer: syz
[  114.792270][ T5931] usb 1-1: config 0 descriptor??
[  114.895013][ T6918] UDPLite: UDP-Lite is deprecated and scheduled to be removed in 2025, please contact the netdev mailing list
[  115.056722][ T5931] usb 1-1: USB disconnect, device number 7
[  115.168907][ T6923] netlink: 96 bytes leftover after parsing attributes in process `syz.3.378'.
[  115.545356][   T33] audit: type=1326 audit(1759223472.326:31): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=6928 comm="syz.3.381" exe="/syz-executor" sig=31 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x0
[  115.774793][ T6933] netlink: 'syz.3.383': attribute type 1 has an invalid length.
[  115.779138][ T6933] netlink: 224 bytes leftover after parsing attributes in process `syz.3.383'.
[  115.926945][   T47] usb 1-1: new high-speed USB device number 8 using dummy_hcd
[  115.930821][ T6935] loop3: detected capacity change from 0 to 128
[  115.956855][ T6935] vxfs: WRONG superblock magic 7b3185b5 at 1
[  115.959730][ T6935] vxfs: WRONG superblock magic 7b318cb5 at 8
[  115.962644][ T6935] vxfs: can't find superblock.
[  116.076399][   T47] usb 1-1: Using ep0 maxpacket: 8
[  116.095487][   T47] usb 1-1: config 16 has an invalid descriptor of length 0, skipping remainder of the config
[  116.099847][   T47] usb 1-1: config 16 has 0 interfaces, different from the descriptor's value: 1
[  116.103543][   T47] usb 1-1: New USB device found, idVendor=ee8d, idProduct=db1a, bcdDevice=61.23
[  116.108323][   T47] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  116.286002][ T5931] usb 4-1: new full-speed USB device number 4 using dummy_hcd
[  116.422360][   T47] usb 1-1: USB disconnect, device number 8
[  116.437669][ T5931] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[  116.482242][ T5931] usb 4-1: New USB device found, idVendor=057e, idProduct=200e, bcdDevice= 0.00
[  116.485520][ T5931] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  116.511855][ T5931] usb 4-1: config 0 descriptor??
[  116.933337][ T5931] nintendo 0003:057E:200E.0003: unbalanced collection at end of report description
[  116.937608][ T5931] nintendo 0003:057E:200E.0003: HID parse failed
[  116.947481][ T5931] nintendo 0003:057E:200E.0003: probe - fail = -22
[  116.950597][ T5931] nintendo 0003:057E:200E.0003: probe with driver nintendo failed with error -22
[  117.139319][ T5931] usb 4-1: USB disconnect, device number 4
[  117.654029][ T6965] loop0: detected capacity change from 0 to 8192
[  117.750346][ T6972] netlink: 76 bytes leftover after parsing attributes in process `syz.3.398'.
[  117.786169][ T6972] netlink: 76 bytes leftover after parsing attributes in process `syz.3.398'.
[  117.786762][ T6965] ldm_parse_privhead(): Cannot find PRIVHEAD structure. LDM database is corrupt. Aborting.
[  117.798662][ T6965] ldm_validate_privheads(): Cannot find PRIVHEAD 1.
[  117.802795][ T6965]  loop0: unable to read partition table
[  117.805316][ T6965] loop_reread_partitions: partition scan of loop0 () failed (rc=-5)
[  117.822114][ T5295] ldm_parse_privhead(): Cannot find PRIVHEAD structure. LDM database is corrupt. Aborting.
[  117.827899][ T5295] ldm_validate_privheads(): Cannot find PRIVHEAD 1.
[  117.831230][ T5295]  loop0: unable to read partition table
[  118.403446][ T6985] loop3: detected capacity change from 0 to 256
[  118.426943][ T6985] FAT-fs (loop3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  118.733341][ T7000] ptrace attach of "/syz-executor exec"[5928] was attempted by "/syz-executor exec"[7000]
[  118.896110][ T5931] usb 4-1: new high-speed USB device number 5 using dummy_hcd
[  119.064186][ T5931] usb 4-1: config 0 interface 0 altsetting 3 endpoint 0x81 has an invalid bInterval 129, changing to 11
[  119.073035][ T5931] usb 4-1: config 0 interface 0 altsetting 3 endpoint 0x81 has invalid wMaxPacketSize 0
[  119.078319][ T5931] usb 4-1: config 0 interface 0 has no altsetting 0
[  119.081183][ T5931] usb 4-1: New USB device found, idVendor=1e7d, idProduct=2d50, bcdDevice= 0.00
[  119.085218][ T5931] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  119.104446][ T5931] usb 4-1: config 0 descriptor??
[  119.407619][ T7011] Bluetooth: MGMT ver 1.23
[  119.409669][ T7011] Bluetooth: hci0: invalid length 1, exp 2 for type 14
[  119.550696][ T5931] kovaplus 0003:1E7D:2D50.0004: unknown main item tag 0x0
[  119.552797][ T5931] kovaplus 0003:1E7D:2D50.0004: unknown main item tag 0x0
[  119.555137][ T5931] kovaplus 0003:1E7D:2D50.0004: unknown main item tag 0x0
[  119.571457][ T5931] kovaplus 0003:1E7D:2D50.0004: unknown main item tag 0x0
[  119.574154][ T5931] kovaplus 0003:1E7D:2D50.0004: unknown main item tag 0x0
[  119.588176][ T5931] kovaplus 0003:1E7D:2D50.0004: hidraw0: USB HID v0.00 Device [HID 1e7d:2d50] on usb-dummy_hcd.3-1/input0
[  119.765780][ T5931] usb 4-1: USB disconnect, device number 5
[  119.902665][ T7018] loop2: detected capacity change from 0 to 4096
[  119.909285][ T7018] ntfs3(loop2): Primary boot: invalid bytes per sector 0.
[  119.913833][ T7018] ntfs3(loop2): try to read out of volume at offset 0x1ffe00
[  119.992011][ T7024] loop2: detected capacity change from 0 to 128
[  119.994952][ T7024] vfat: Unknown parameter '0xffffffffffffffff01777777777777777777777'
[  120.270112][ T7026] input: syz0 as /devices/virtual/input/input6
[  120.670902][ T7032] netlink: 8 bytes leftover after parsing attributes in process `syz.0.424'.
[  120.923768][ T5989] usb 4-1: new high-speed USB device number 6 using dummy_hcd
[  120.967279][ T7038] netlink: 'syz.2.427': attribute type 3 has an invalid length.
[  121.056279][   T47] usb 1-1: new high-speed USB device number 9 using dummy_hcd
[  121.096071][ T5989] usb 4-1: Using ep0 maxpacket: 16
[  121.100457][ T5989] usb 4-1: config 0 has an invalid descriptor of length 0, skipping remainder of the config
[  121.106171][ T5989] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x82 has an invalid bInterval 0, changing to 7
[  121.110283][ T5989] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x2 has invalid wMaxPacketSize 0
[  121.113956][ T5989] usb 4-1: config 0 interface 0 altsetting 0 bulk endpoint 0x2 has invalid maxpacket 0
[  121.122698][ T5989] usb 4-1: config 0 interface 0 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 3
[  121.131611][ T5989] usb 4-1: New USB device found, idVendor=2040, idProduct=b138, bcdDevice= 1.42
[  121.135128][ T5989] usb 4-1: New USB device strings: Mfr=4, Product=0, SerialNumber=0
[  121.139066][ T5989] usb 4-1: Manufacturer: syz
[  121.144114][ T5989] usb 4-1: config 0 descriptor??
[  121.218522][   T47] usb 1-1: config index 0 descriptor too short (expected 4114, got 18)
[  121.224455][   T47] usb 1-1: New USB device found, idVendor=0dba, idProduct=1000, bcdDevice= 0.09
[  121.228161][   T47] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  121.231348][   T47] usb 1-1: Product: syz
[  121.233098][   T47] usb 1-1: Manufacturer: syz
[  121.235009][   T47] usb 1-1: SerialNumber: syz
[  121.259447][   T47] usb 1-1: config 0 descriptor??
[  121.406068][ T5989] rc_core: IR keymap rc-hauppauge not found
[  121.408314][ T5989] Registered IR keymap rc-empty
[  121.410258][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.426127][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.447264][ T5989] rc rc0: Conexant Hybrid TV (cx231xx) MCE IR no TX as /devices/platform/dummy_hcd.3/usb4/4-1/4-1:0.0/rc/rc0
[  121.453577][ T5989] input: Conexant Hybrid TV (cx231xx) MCE IR no TX as /devices/platform/dummy_hcd.3/usb4/4-1/4-1:0.0/rc/rc0/input7
[  121.459755][ T5922] usb 3-1: new high-speed USB device number 7 using dummy_hcd
[  121.476763][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.480467][   T47] usb 1-1: USB disconnect, device number 9
[  121.496197][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.516480][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.536059][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.556117][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.576273][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.596073][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.616300][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.627793][ T5922] usb 3-1: config 160 has an invalid interface number: 200 but max is 0
[  121.631030][ T5922] usb 3-1: config 160 has no interface number 0
[  121.633188][ T5922] usb 3-1: config 160 interface 200 has no altsetting 0
[  121.636055][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.641080][ T5922] usb 3-1: New USB device found, idVendor=21bb, idProduct=2070, bcdDevice=87.0b
[  121.644848][ T5922] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  121.652786][ T5922] usb 3-1: Product: syz
[  121.654413][ T5922] usb 3-1: Manufacturer: syz
[  121.656960][ T5989] mceusb 4-1:0.0: Error: mce write submit urb error = -90
[  121.659724][ T5922] usb 3-1: SerialNumber: syz
[  121.678944][ T5989] mceusb 4-1:0.0: Registered 424242424242 with mce emulator interface version 1
[  121.682465][ T5989] mceusb 4-1:0.0: 2 tx ports (0x0 cabled) and 2 rx sensors (0x0 active)
[  121.812158][   T10] usb 4-1: USB disconnect, device number 6
[  121.877444][ T5922] usb 3-1: Quirk or no altset; falling back to MIDI 1.0
[  121.880315][ T5922] usb 3-1: MIDIStreaming interface descriptor not found
[  121.906142][ T5922] usb 3-1: USB disconnect, device number 7
[  122.387255][ T7064] netlink: 20 bytes leftover after parsing attributes in process `syz.3.437'.
[  122.432102][ T7069] loop3: detected capacity change from 0 to 256
[  122.435708][ T7069] FAT-fs (loop3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  122.452403][ T5926] Bluetooth: hci2: Dropping invalid advertising data
[  122.455396][ T5926] Bluetooth: hci2: Malformed LE Event: 0x02
[  123.316148][   T47] usb 1-1: new high-speed USB device number 10 using dummy_hcd
[  123.336026][ T5931] usb 3-1: new high-speed USB device number 8 using dummy_hcd
[  123.469712][   T47] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[  123.474356][   T47] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[  123.480157][   T47] usb 1-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 21
[  123.484952][   T47] usb 1-1: New USB device found, idVendor=047f, idProduct=ffff, bcdDevice= 0.00
[  123.488741][   T47] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  123.494057][   T47] usb 1-1: config 0 descriptor??
[  123.499514][   T47] hub 1-1:0.0: USB hub found
[  123.501355][ T5931] usb 3-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[  123.518744][ T5931] usb 3-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[  123.526233][ T5931] usb 3-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 21
[  123.531250][ T5931] usb 3-1: New USB device found, idVendor=047f, idProduct=ffff, bcdDevice= 0.00
[  123.534733][ T5931] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  123.557228][ T5931] usb 3-1: config 0 descriptor??
[  123.706087][   T47] hub 1-1:0.0: 14 ports detected
[  123.710688][   T47] hub 1-1:0.0: insufficient power available to use all downstream ports
[  123.751697][ T7089] loop3: detected capacity change from 0 to 32768
[  123.838252][ T7089] ocfs2: Mounting device (7,3) on (node local, slot 0) with writeback data mode.
[  123.886082][ T6378] ocfs2: Unmounting device (7,3) on (node local)
[  123.905699][   T47] hub 1-1:0.0: hub_hub_status failed (err = -71)
[  123.908623][   T47] hub 1-1:0.0: config failed, can't get hub status (err -71)
[  123.937620][   T47] usb 1-1: USB disconnect, device number 10
[  124.012025][ T5931] plantronics 0003:047F:FFFF.0005: hiddev0,hidraw0: USB HID v0.40 Device [HID 047f:ffff] on usb-dummy_hcd.2-1/input0
[  124.063899][ T7095] netlink: 92 bytes leftover after parsing attributes in process `syz.3.450'.
[  124.142744][ T7099] netlink: 4 bytes leftover after parsing attributes in process `syz.3.452'.
[  124.147474][ T7099] netlink: 4 bytes leftover after parsing attributes in process `syz.3.452'.
[  124.151008][ T7099] A link change request failed with some changes committed already. Interface caif0 may have been left with an inconsistent configuration, please check.
[  124.457202][ T7105] loop0: detected capacity change from 0 to 16
[  124.463990][ T7105] erofs (device loop0): mounted with root inode @ nid 36.
[  124.499594][ T5922] usb 4-1: new high-speed USB device number 7 using dummy_hcd
[  124.610467][    C0] plantronics 0003:047F:FFFF.0005: hid_field_extract() called with n (132) > 32! (syz.0.455)
[  124.655997][ T5922] usb 4-1: Using ep0 maxpacket: 8
[  124.661086][ T5922] usb 4-1: New USB device found, idVendor=10d2, idProduct=0001, bcdDevice= 0.00
[  124.663941][ T5922] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  124.674413][ T5922] usb 4-1: config 0 descriptor??
[  124.684684][ T5922] usblcd 4-1:0.0: Could not find both bulk-in and bulk-out endpoints
[  124.819291][ T5931] usb 3-1: USB disconnect, device number 8
[  124.903212][ T5974] usb 4-1: USB disconnect, device number 7
[  125.719809][ T7113] loop2: detected capacity change from 0 to 32768
[  125.736870][ T7113] XFS (loop2): Mounting V5 Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791
[  125.755647][ T7113] XFS (loop2): Ending clean mount
[  125.836246][ T5930] XFS (loop2): Unmounting Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791
[  126.142395][ T7142] loop0: detected capacity change from 0 to 1024
[  126.151257][ T7142] hfsplus: Bad value for 'gid'
[  126.366033][ T5922] usb 4-1: new high-speed USB device number 8 using dummy_hcd
[  126.397709][ T7144] loop2: detected capacity change from 0 to 8192
[  126.424429][ T7145] NILFS (loop2): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
[  126.484694][ T7147] usb usb9: usbfs: process 7147 (syz.2.469) did not claim interface 6 before use
[  126.518767][ T5922] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x3 has an invalid bInterval 0, changing to 7
[  126.525297][ T5922] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x3 has invalid wMaxPacketSize 0
[  126.535179][ T5922] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x8A has an invalid bInterval 0, changing to 7
[  126.542652][ T5922] usb 4-1: New USB device found, idVendor=0a07, idProduct=00d0, bcdDevice=10.13
[  126.548876][ T5922] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  126.552183][ T5922] usb 4-1: Product: syz
[  126.554008][ T5922] usb 4-1: Manufacturer: syz
[  126.556063][ T5922] usb 4-1: SerialNumber: syz
[  126.561792][ T5922] usb 4-1: config 0 descriptor??
[  127.202133][ T5922] adutux 4-1:0.0: ADU208 4242424 now attached to /dev/usb/adutux0
[  127.217883][ T5922] usb 4-1: USB disconnect, device number 8
[  127.281486][ T7155] netdevsim netdevsim0 : renamed from netdevsim0 (while UP)
[  127.356848][ T7157] loop0: detected capacity change from 0 to 512
[  127.366565][ T7157] EXT4-fs (loop0): Test dummy encryption mode enabled
[  127.372721][ T7157] EXT4-fs (loop0): encrypted files will use data=ordered instead of data journaling mode
[  127.416000][ T7157] EXT4-fs error (device loop0): ext4_orphan_get:1418: comm syz.0.473: bad orphan inode 131083
[  127.420616][ T7157] EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
[  127.510698][ T7157] fscrypt: AES-256-CBC-CTS using implementation "cts(cbc(ecb(aes-fixed-time)))"
[  127.534765][ T5928] EXT4-fs (loop0): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  127.584690][ T7170] iommufd_mock iommufd_mock0: Adding to iommu group 0
[  127.807554][ T5931] usb 3-1: new high-speed USB device number 9 using dummy_hcd
[  127.967503][ T5931] usb 3-1: Using ep0 maxpacket: 8
[  127.975269][ T5931] usb 3-1: config index 0 descriptor too short (expected 30, got 18)
[  128.022350][ T5931] usb 3-1: New USB device found, idVendor=1660, idProduct=0932, bcdDevice=80.ea
[  128.039387][ T5931] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  128.051710][ T5931] usb 3-1: Product: syz
[  128.062713][ T5931] usb 3-1: Manufacturer: syz
[  128.083439][ T5931] usb 3-1: SerialNumber: syz
[  128.124656][ T5931] usb 3-1: config 0 descriptor??
[  128.149147][ T5931] dvb-usb: found a 'Medion MD95700 (MDUSBTV-HYBRID)' in warm state.
[  128.152575][ T5931] usb 3-1: setting power ON
[  128.155257][ T5931] dvb-usb: bulk message failed: -22 (2/0)
[  128.177372][ T5931] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  128.187181][ T5931] dvbdev: DVB: registering new adapter (Medion MD95700 (MDUSBTV-HYBRID))
[  128.190802][ T5931] usb 3-1: media controller created
[  128.283841][ T5931] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[  128.315134][ T5931] usb 3-1: selecting invalid altsetting 6
[  128.318262][ T5931] usb 3-1: digital interface selection failed (-22)
[  128.322327][ T5931] dvb-usb: no frontend was attached by 'Medion MD95700 (MDUSBTV-HYBRID)'
[  128.333901][ T5931] usb 3-1: setting power OFF
[  128.346050][ T5931] dvb-usb: bulk message failed: -22 (2/0)
[  128.348579][ T5931] dvb-usb: Medion MD95700 (MDUSBTV-HYBRID) successfully initialized and connected.
[  128.352407][ T5931] (NULL device *): no alternate interface
[  128.492668][ T5931] dvb-usb: Medion MD95700 (MDUSBTV-HYBRID) successfully deinitialized and disconnected.
[  128.516855][ T5931] usb 3-1: USB disconnect, device number 9
[  128.791806][ T7190] loop3: detected capacity change from 0 to 512
[  128.800767][ T7190] EXT4-fs: Quota format mount options ignored when QUOTA feature is enabled
[  128.825684][ T7190] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  128.830393][ T7190] ext4 filesystem being mounted at /78/file1 supports timestamps until 2038-01-19 (0x7fffffff)
[  128.860464][ T7190] EXT4-fs error (device loop3): ext4_xattr_block_list:766: inode #15: comm syz.3.486: corrupted xattr block 19: overlapping e_value 
[  128.901047][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  129.127148][ T7201] netlink: 36 bytes leftover after parsing attributes in process `syz.2.490'.
[  130.894166][ T7235] loop0: detected capacity change from 0 to 32768
[  130.942524][ T7251] netlink: 61211 bytes leftover after parsing attributes in process `syz.2.509'.
[  131.296231][ T5931] usb 4-1: new high-speed USB device number 9 using dummy_hcd
[  131.460210][ T7284] loop0: detected capacity change from 0 to 1024
[  131.480026][ T5931] usb 4-1: config 0 has an invalid interface number: 57 but max is 0
[  131.483238][ T5931] usb 4-1: config 0 has no interface number 0
[  131.485605][ T5931] usb 4-1: New USB device found, idVendor=093a, idProduct=010f, bcdDevice=c6.63
[  131.504039][ T5931] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  131.510482][ T1090] hfsplus: b-tree write err: -5, ino 4
[  131.522259][ T5931] usb 4-1: config 0 descriptor??
[  131.535457][ T5931] gspca_main: mr97310a-2.14.0 probing 093a:010f
[  131.545004][ T5931] gspca_mr97310a: reg write [21] error -22
[  131.547913][ T5931] mr97310a 4-1:0.57: probe with driver mr97310a failed with error -22
[  131.714848][ T7299] netlink: 12 bytes leftover after parsing attributes in process `syz.2.531'.
[  131.730310][ T5931] usb 4-1: USB disconnect, device number 9
[  131.879160][ T7307] iommufd_mock iommufd_mock0: Adding to iommu group 0
[  131.914854][ T7309] netlink: 128 bytes leftover after parsing attributes in process `syz.0.536'.
[  131.920275][ T7309] netlink: 8 bytes leftover after parsing attributes in process `syz.0.536'.
[  132.286109][   T47] usb 3-1: new high-speed USB device number 10 using dummy_hcd
[  132.436062][   T47] usb 3-1: Using ep0 maxpacket: 32
[  132.461258][   T47] usb 3-1: config 0 has an invalid interface number: 255 but max is 0
[  132.476017][   T47] usb 3-1: config 0 has an invalid descriptor of length 0, skipping remainder of the config
[  132.492599][   T47] usb 3-1: config 0 has no interface number 0
[  132.499057][   T47] usb 3-1: config 0 interface 255 altsetting 0 endpoint 0x6 has invalid wMaxPacketSize 0
[  132.510945][   T47] usb 3-1: config 0 interface 255 altsetting 0 bulk endpoint 0x6 has invalid maxpacket 0
[  132.521184][   T47] usb 3-1: config 0 interface 255 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 2
[  132.536248][ T1362] ieee802154 phy0 wpan0: encryption failed: -22
[  132.540052][ T1362] ieee802154 phy1 wpan1: encryption failed: -22
[  132.557373][   T47] usb 3-1: New USB device found, idVendor=0499, idProduct=152e, bcdDevice=b4.9a
[  132.561179][   T47] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  132.564445][   T47] usb 3-1: Product: syz
[  132.566812][   T47] usb 3-1: Manufacturer: syz
[  132.570321][   T47] usb 3-1: SerialNumber: syz
[  132.578758][   T47] usb 3-1: config 0 descriptor??
[  132.869554][ T7330] loop3: detected capacity change from 0 to 512
[  132.885039][ T7330] EXT4-fs (loop3): feature flags set on rev 0 fs, running e2fsck is recommended
[  132.913876][ T7330] Quota error (device loop3): do_check_range: Getting dqdh_prev_free 1536 out of range 0-5
[  132.927376][ T7330] Quota error (device loop3): qtree_write_dquot: Error -117 occurred while creating quota
[  132.931509][ T7330] EXT4-fs error (device loop3): ext4_acquire_dquot:6945: comm syz.3.546: Failed to acquire dquot type 1
[  132.963372][ T7330] EXT4-fs (loop3): 1 truncate cleaned up
[  133.016281][ T7330] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  133.059776][   T47] usb 3-1: USB disconnect, device number 10
[  133.079471][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  133.225305][ T6239] udevd[6239]: error opening ATTR{/sys/devices/platform/dummy_hcd.2/usb3/3-1/3-1:0.255/sound/card3/controlC3/../uevent} for writing: No such file or directory
[  133.451831][ T7341] vlan2: entered allmulticast mode
[  133.577761][   T33] audit: type=1326 audit(1759223490.356:32): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7348 comm="syz.3.554" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  133.585200][   T33] audit: type=1326 audit(1759223490.356:33): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7348 comm="syz.3.554" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  133.610921][   T33] audit: type=1326 audit(1759223490.356:34): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7348 comm="syz.3.554" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  133.624016][   T33] audit: type=1326 audit(1759223490.356:35): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7348 comm="syz.3.554" exe="/syz-executor" sig=0 arch=c000003e syscall=266 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  133.632252][   T33] audit: type=1326 audit(1759223490.356:36): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7348 comm="syz.3.554" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  133.639982][   T33] audit: type=1326 audit(1759223490.356:37): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7348 comm="syz.3.554" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  133.651656][   T33] audit: type=1326 audit(1759223490.356:38): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7348 comm="syz.3.554" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  133.661192][   T33] audit: type=1326 audit(1759223490.356:39): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7348 comm="syz.3.554" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  133.675428][ T7353] loop3: detected capacity change from 0 to 2048
[  133.696687][ T7353] UDF-fs: INFO Mounting volume 'LiuxUDF', timestamp 2022/11/22 14:59 (1000)
[  133.817800][ T7365] netlink: 164 bytes leftover after parsing attributes in process `syz.2.562'.
[  133.884454][ T7369] loop3: detected capacity change from 0 to 128
[  133.929689][ T7371] netlink: 'syz.2.565': attribute type 1 has an invalid length.
[  133.956114][   T47] usb 1-1: new high-speed USB device number 11 using dummy_hcd
[  134.116027][   T47] usb 1-1: Using ep0 maxpacket: 32
[  134.123805][   T47] usb 1-1: config 0 has an invalid descriptor of length 0, skipping remainder of the config
[  134.142771][   T47] usb 1-1: New USB device found, idVendor=22b8, idProduct=6027, bcdDevice=c2.80
[  134.147563][ T7381] loop2: detected capacity change from 0 to 4096
[  134.151202][   T47] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  134.154309][   T47] usb 1-1: Product: syz
[  134.156779][ T7381] ntfs3(loop2): Different NTFS sector size (1024) and media sector size (512).
[  134.160398][   T47] usb 1-1: Manufacturer: syz
[  134.162193][   T47] usb 1-1: SerialNumber: syz
[  134.176893][   T47] usb 1-1: config 0 descriptor??
[  134.190958][   T47] cdc_ether 1-1:0.0: skipping garbage
[  134.193011][   T47] usb 1-1: bad CDC descriptors
[  134.195742][   T47] usb 1-1: unsupported MDLM descriptors
[  134.210956][ T7381] ntfs3(loop2): ino=0, attr_set_size
[  134.214482][ T7381] ntfs3(loop2): ino=0, attr_set_size
[  134.218902][ T7381] ntfs3(loop2): ino=0, attr_set_size
[  134.384667][   T47] usb 1-1: USB disconnect, device number 11
[  134.584191][ T7404] loop2: detected capacity change from 0 to 8
[  135.426070][ T7410] loop3: detected capacity change from 0 to 256
[  135.448548][ T7410] exFAT-fs (loop3): failed to load upcase table (idx : 0x000104d0, chksum : 0x60d18cac, utbl_chksum : 0xe619d30d)
[  135.453769][ T7410] exFAT-fs (loop3): failed to load alloc-bitmap
[  135.457852][ T7410] exFAT-fs (loop3): failed to recognize exfat type
[  135.650249][   T47] usb 1-1: new high-speed USB device number 12 using dummy_hcd
[  135.766146][ T5974] usb 4-1: new high-speed USB device number 10 using dummy_hcd
[  135.805989][   T47] usb 1-1: Using ep0 maxpacket: 16
[  135.814135][   T47] usb 1-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[  135.818002][   T47] usb 1-1: New USB device found, idVendor=04d8, idProduct=00dd, bcdDevice= 0.00
[  135.820859][   T47] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  135.839556][   T47] usb 1-1: config 0 descriptor??
[  135.916383][ T5974] usb 4-1: Using ep0 maxpacket: 8
[  135.921100][ T5974] usb 4-1: config 162 has an invalid interface number: 97 but max is 0
[  135.924242][ T5974] usb 4-1: config 162 has no interface number 0
[  135.928635][ T5974] usb 4-1: config 162 interface 97 has no altsetting 0
[  135.934417][ T5974] usb 4-1: New USB device found, idVendor=0c2e, idProduct=0700, bcdDevice=e1.3b
[  135.939625][ T5974] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  135.943388][ T5974] usb 4-1: Product: syz
[  135.945079][ T5974] usb 4-1: Manufacturer: syz
[  135.947636][ T5974] usb 4-1: SerialNumber: syz
[  136.159132][ T5974] metro_usb 4-1:162.97: interrupt-out endpoint missing
[  136.171782][ T5974] usb 4-1: USB disconnect, device number 10
[  136.253994][   T47] mcp2221 0003:04D8:00DD.0006: USB HID v0.05 Device [HID 04d8:00dd] on usb-dummy_hcd.0-1/input0
[  136.368554][ T5922] usb 3-1: new high-speed USB device number 11 using dummy_hcd
[  136.525970][ T5922] usb 3-1: Using ep0 maxpacket: 32
[  136.531681][ T5922] usb 3-1: config 8 has an invalid interface number: 183 but max is 0
[  136.535073][ T5922] usb 3-1: config 8 has an invalid interface descriptor of length 5, skipping
[  136.538750][ T5922] usb 3-1: config 8 has an invalid interface descriptor of length 5, skipping
[  136.542371][ T5922] usb 3-1: config 8 has an invalid descriptor of length 1, skipping remainder of the config
[  136.546498][ T5922] usb 3-1: config 8 has no interface number 0
[  136.548961][ T5922] usb 3-1: config 8 interface 183 altsetting 2 has 0 endpoint descriptors, different from the interface descriptor's value: 7
[  136.553925][ T5922] usb 3-1: config 8 interface 183 has no altsetting 0
[  136.560423][ T5922] usb 3-1: New USB device found, idVendor=0545, idProduct=808b, bcdDevice=69.50
[  136.564036][ T5922] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  136.567254][ T5922] usb 3-1: Product: syz
[  136.568945][ T5922] usb 3-1: Manufacturer: syz
[  136.570729][ T5922] usb 3-1: SerialNumber: syz
[  136.659697][ T5931] usb 1-1: USB disconnect, device number 12
[  136.765055][ T7427] mmap: syz.3.589 (7427) uses deprecated remap_file_pages() syscall. See Documentation/mm/remap_file_pages.rst.
[  136.794872][ T5922] gspca_main: tv8532-2.14.0 probing 0545:808b
[  136.844824][ T5922] usb 3-1: USB disconnect, device number 11
[  136.900247][ T7432] netem: incorrect gi model size
[  136.902566][ T7432] netem: change failed
[  137.285743][ T7452] loop3: detected capacity change from 0 to 512
[  137.294154][ T7452] EXT4-fs (loop3): encrypted files will use data=ordered instead of data journaling mode
[  137.320961][ T7452] EXT4-fs (loop3): 1 truncate cleaned up
[  137.323976][ T7452] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
[  137.625711][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  137.960544][ T7479] netlink: 12 bytes leftover after parsing attributes in process `syz.3.606'.
[  138.284525][ T7485] netlink: 60 bytes leftover after parsing attributes in process `syz.0.613'.
[  138.620653][   T33] kauditd_printk_skb: 8 callbacks suppressed
[  138.620666][   T33] audit: type=1326 audit(1759223495.406:48): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7493 comm="syz.3.617" exe="/syz-executor" sig=31 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x0
[  138.739412][ T7499] loop3: detected capacity change from 0 to 16
[  138.750971][ T7499] erofs (device loop3): mounted with root inode @ nid 36.
[  139.466034][   T47] usb 1-1: new high-speed USB device number 13 using dummy_hcd
[  139.623071][   T47] usb 1-1: config 0 has an invalid descriptor of length 0, skipping remainder of the config
[  139.632343][   T47] usb 1-1: config 0 interface 0 altsetting 0 has 0 endpoint descriptors, different from the interface descriptor's value: 1
[  139.639413][   T47] usb 1-1: New USB device found, idVendor=13e5, idProduct=0001, bcdDevice=4e.53
[  139.643191][   T47] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  139.650331][   T47] usb 1-1: config 0 descriptor??
[  139.799538][ T7512] loop2: detected capacity change from 0 to 8
[  139.856051][  T794] usb 4-1: new high-speed USB device number 11 using dummy_hcd
[  139.859058][ T7512] SQUASHFS error: Failed to read block 0x1ec: -5
[  139.859076][ T7512] SQUASHFS error: Unable to read metadata cache entry [1ea]
[  139.921098][   T47] usb 1-1: USB disconnect, device number 13
[  140.034430][ T7516] loop2: detected capacity change from 0 to 1024
[  140.041320][  T794] usb 4-1: New USB device found, idVendor=1604, idProduct=8001, bcdDevice=44.1f
[  140.049276][  T794] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  140.052406][  T794] usb 4-1: Product: syz
[  140.054069][  T794] usb 4-1: Manufacturer: syz
[  140.055861][  T794] usb 4-1: SerialNumber: syz
[  140.065460][  T794] usb 4-1: config 0 descriptor??
[  140.075706][ T7516] EXT4-fs (loop2): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
[  140.102417][ T5930] EXT4-fs (loop2): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  140.192278][ T7522] netlink: 'syz.2.629': attribute type 1 has an invalid length.
[  140.194604][ T7522] netlink: 'syz.2.629': attribute type 1 has an invalid length.
[  140.232489][ T7524] loop2: detected capacity change from 0 to 512
[  140.239762][ T7524] EXT4-fs (loop2): feature flags set on rev 0 fs, running e2fsck is recommended
[  140.243572][ T7524] EXT4-fs (loop2): mounting ext2 file system using the ext4 subsystem
[  140.250860][ T7524] [EXT4 FS bs=4096, gc=1, bpg=32768, ipg=32, mo=a042c01c, mo2=0002]
[  140.253999][ T7524] System zones: 0-2, 18-18, 34-34
[  140.256992][ T7524] EXT4-fs error (device loop2): ext4_orphan_get:1392: comm syz.2.630: inode #15: comm syz.2.630: iget: illegal inode #
[  140.263348][ T7524] EXT4-fs error (device loop2): ext4_orphan_get:1397: comm syz.2.630: couldn't read orphan inode 15 (err -117)
[  140.273479][ T7524] EXT4-fs (loop2): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
[  140.285030][  T794] usb 4-1: USB disconnect, device number 11
[  140.285372][ T7524] EXT4-fs error (device loop2): ext4_empty_dir:3086: inode #12: block 13: comm syz.2.630: bad entry in directory: rec_len is smaller than minimal - offset=0, inode=12, rec_len=0, size=4096 fake=1
[  140.297105][ T7524] EXT4-fs warning (device loop2): ext4_empty_dir:3089: inode #12: comm syz.2.630: directory missing '.'
[  140.329469][ T5930] EXT4-fs (loop2): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  140.388179][ T7527] loop2: detected capacity change from 0 to 2048
[  140.422382][ T7527] EXT4-fs (loop2): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
[  140.442182][   T33] audit: type=1800 audit(1759223497.226:49): pid=7527 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed(directio) comm="syz.2.631" name="file2" dev="loop2" ino=16 res=0 errno=0
[  140.484233][ T5930] EXT4-fs (loop2): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  140.634403][ T7537] loop2: detected capacity change from 0 to 256
[  140.724491][ T7541] xt_HMARK: spi-set and port-set can't be combined
[  141.563357][ T7552] netlink: 2028 bytes leftover after parsing attributes in process `syz.3.641'.
[  141.567191][ T7552] netlink: 24 bytes leftover after parsing attributes in process `syz.3.641'.
[  141.998207][ T7560] loop2: detected capacity change from 0 to 128
[  142.014374][ T7560] qnx6: superblock #1 checksum error
[  142.219025][ T7569] loop2: detected capacity change from 0 to 2048
[  142.241341][ T7569] UDF-fs: INFO Mounting volume 'LiuxUDF', timestamp 2022/11/22 14:59 (1000)
[  142.252983][ T7569] UDF-fs: error (device loop2): udf_read_inode: (ino 1345) failed !bh
[  142.275451][ T7569] UDF-fs: error (device loop2): udf_read_inode: (ino 1345) failed !bh
[  142.280156][ T7569] UDF-fs: error (device loop2): udf_read_inode: (ino 1345) failed !bh
[  142.298114][ T7569] UDF-fs: error (device loop2): udf_read_inode: (ino 1345) failed !bh
[  142.737306][ T7589] loop2: detected capacity change from 0 to 4096
[  142.764207][ T7591] A link change request failed with some changes committed already. Interface team0 may have been left with an inconsistent configuration, please check.
[  142.955679][   T33] audit: type=1326 audit(1759223499.736:50): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7596 comm="syz.2.662" exe="/syz-executor" sig=31 arch=c000003e syscall=202 compat=0 ip=0x7f99f118ec29 code=0x0
[  143.001112][ T7599] netlink: 36 bytes leftover after parsing attributes in process `syz.3.664'.
[  143.023178][ T7599] netlink: 36 bytes leftover after parsing attributes in process `syz.3.664'.
[  143.027340][ T7599] netlink: 21 bytes leftover after parsing attributes in process `syz.3.664'.
[  143.101308][ T7603] loop2: detected capacity change from 0 to 1024
[  143.155773][ T7603] hfsplus: request for non-existent node 1280 in B*Tree
[  143.159483][ T7603] hfsplus: request for non-existent node 1280 in B*Tree
[  143.322984][ T7595] loop0: detected capacity change from 0 to 32768
[  143.377159][ T7595] ERROR: (device loop0): dbAlloc: the hint is outside the map
[  143.377159][ T7595] 
[  143.424624][ T6566] read_mapping_page failed!
[  143.434140][ T6566] ERROR: (device loop0): txCommit: 
[  143.434140][ T6566] 
[  143.438396][ T6566] jfs_write_inode: jfs_commit_inode failed!
[  143.496038][  T794] usb 4-1: new high-speed USB device number 12 using dummy_hcd
[  143.646470][  T794] usb 4-1: Using ep0 maxpacket: 16
[  143.655127][  T794] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[  143.659957][  T794] usb 4-1: New USB device found, idVendor=0e8f, idProduct=0012, bcdDevice= 0.00
[  143.663644][  T794] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  143.681069][  T794] usb 4-1: config 0 descriptor??
[  144.122363][  T794] greenasia 0003:0E8F:0012.0007: hidraw0: USB HID v0.05 Device [HID 0e8f:0012] on usb-dummy_hcd.3-1/input0
[  144.132980][  T794] greenasia 0003:0E8F:0012.0007: no inputs found
[  144.239667][ T7624] capability: warning: `syz.0.676' uses deprecated v2 capabilities in a way that may be insecure
[  144.250809][ T7624] program syz.0.676 is using a deprecated SCSI ioctl, please convert it to SG_IO
[  144.342402][  T794] usb 4-1: USB disconnect, device number 12
[  144.573618][ T7628] netlink: 4 bytes leftover after parsing attributes in process `syz.0.678'.
[  145.331893][ T7647] loop3: detected capacity change from 0 to 4096
[  145.593280][ T7658] loop3: detected capacity change from 0 to 1024
[  145.637348][ T7652] loop0: detected capacity change from 0 to 32768
[  145.716683][ T7660] warning: `syz.2.693' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[  145.726326][   T33] audit: type=1800 audit(1759223502.506:51): pid=7658 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed(directio) comm="syz.3.691" name="file2" dev="loop3" ino=22 res=0 errno=0
[  145.776950][ T1090] hfsplus: b-tree write err: -5, ino 4
[  145.903888][ T7671] overlayfs: NFS export requires "redirect_dir=nofollow" on non-upper mount, falling back to nfs_export=off.
[  145.911103][ T7671] overlayfs: missing 'lowerdir'
[  146.184934][ T7682] loop0: detected capacity change from 0 to 256
[  146.192317][ T7682] exFAT-fs (loop0): failed to load upcase table (idx : 0x00010000, chksum : 0x7c732dc0, utbl_chksum : 0xe619d30d)
[  146.211317][ T7682] overlay: filesystem on ./file0 not supported
[  146.379188][ T7690] XFS (nbd3): SB validate failed with error -5.
[  146.546524][ T7686] loop0: detected capacity change from 0 to 32768
[  146.615007][ T7686] XFS (loop0): Mounting V5 Filesystem c496e05e-540d-4c72-b591-04d79d8b4eeb
[  146.619368][ T7703] loop3: detected capacity change from 0 to 512
[  146.624110][ T7703] EXT4-fs (loop3): feature flags set on rev 0 fs, running e2fsck is recommended
[  146.647450][ T7703] EXT4-fs (loop3): warning: checktime reached, running e2fsck is recommended
[  146.652818][ T7686] XFS (loop0): Ending clean mount
[  146.652975][ T7703] [EXT4 FS bs=4096, gc=1, bpg=32768, ipg=32, mo=a842c01c, mo2=0002]
[  146.658809][ T7703] System zones: 0-2, 18-18, 34-34
[  146.661961][ T7703] EXT4-fs error (device loop3): ext4_orphan_get:1392: inode #15: comm syz.3.708: iget: bad i_size value: 360287970189639680
[  146.669877][ T7703] EXT4-fs error (device loop3): ext4_orphan_get:1397: comm syz.3.708: couldn't read orphan inode 15 (err -117)
[  146.677274][ T7703] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
[  146.700223][ T5928] XFS (loop0): Unmounting Filesystem c496e05e-540d-4c72-b591-04d79d8b4eeb
[  146.886166][ T7712] netlink: 'syz.2.710': attribute type 1 has an invalid length.
[  147.073107][ T7713] EXT4-fs error (device loop3): ext4_lookup:1787: inode #15: comm syz.3.708: iget: bad i_size value: 360287970189639680
[  147.355158][ T7717] netlink: 68 bytes leftover after parsing attributes in process `syz.2.712'.
[  147.586666][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  148.120977][ T7741] loop0: detected capacity change from 0 to 32768
[  148.140820][ T7741] ocfs2: Mounting device (7,0) on (node local, slot 0) with ordered data mode.
[  148.180319][ T7741] OCFS2: ERROR (device loop0): int ocfs2_validate_gd_self(struct super_block *, struct buffer_head *, int): Group descriptor #2304 has bad signature 
[  148.187127][ T7741] On-disk corruption discovered. Please run fsck.ocfs2 once the filesystem is unmounted.
[  148.191105][ T7741] OCFS2: File system is now read-only.
[  148.193399][ T7741] (syz.0.721,7741,0):ocfs2_search_chain:1852 ERROR: status = -30
[  148.198100][ T7741] (syz.0.721,7741,0):ocfs2_search_chain:1940 ERROR: status = -30
[  148.202853][ T7741] (syz.0.721,7741,0):ocfs2_claim_suballoc_bits:2010 ERROR: status = -30
[  148.210382][ T7741] (syz.0.721,7741,0):ocfs2_claim_suballoc_bits:2063 ERROR: status = -30
[  148.213878][ T7741] (syz.0.721,7741,0):__ocfs2_claim_clusters:2438 ERROR: status = -30
[  148.217845][ T7741] (syz.0.721,7741,0):__ocfs2_claim_clusters:2446 ERROR: status = -30
[  148.221127][ T7741] (syz.0.721,7741,0):ocfs2_local_alloc_new_window:1199 ERROR: status = -30
[  148.224618][ T7741] (syz.0.721,7741,0):ocfs2_local_alloc_new_window:1224 ERROR: status = -30
[  148.228727][ T7741] (syz.0.721,7741,0):ocfs2_local_alloc_slide_window:1298 ERROR: status = -30
[  148.232573][ T7741] (syz.0.721,7741,0):ocfs2_local_alloc_slide_window:1317 ERROR: status = -30
[  148.237752][ T7741] (syz.0.721,7741,0):ocfs2_reserve_local_alloc_bits:672 ERROR: status = -30
[  148.241566][ T7741] (syz.0.721,7741,0):ocfs2_reserve_local_alloc_bits:710 ERROR: status = -30
[  148.246661][ T7741] (syz.0.721,7741,0):ocfs2_reserve_clusters_with_limit:1172 ERROR: status = -30
[  148.250326][ T7741] (syz.0.721,7741,0):ocfs2_reserve_clusters_with_limit:1221 ERROR: status = -30
[  148.253994][ T7741] (syz.0.721,7741,0):ocfs2_lock_allocators:2775 ERROR: status = -30
[  148.258631][ T7741] (syz.0.721,7741,0):ocfs2_extend_allocation:592 ERROR: status = -30
[  148.262237][ T7741] (syz.0.721,7741,0):ocfs2_allocate_unwritten_extents:1499 ERROR: status = -30
[  148.266354][ T7741] (syz.0.721,7741,0):__ocfs2_change_file_space:2045 ERROR: status = -30
[  148.302097][ T5928] (syz-executor,5928,1):ocfs2_inode_is_valid_to_delete:948 ERROR: Skipping delete of system file 72
[  148.317250][ T5928] ocfs2: Unmounting device (7,0) on (node local)
[  148.754723][ T7749] loop0: detected capacity change from 0 to 32768
[  148.759343][ T7749] BTRFS: device fsid ed167579-eb65-4e76-9a50-61ac97e9b59d devid 1 transid 8 /dev/loop0 (7:0) scanned by syz.0.724 (7749)
[  148.786611][ T7749] BTRFS info (device loop0): first mount of filesystem ed167579-eb65-4e76-9a50-61ac97e9b59d
[  148.790651][ T7749] BTRFS info (device loop0): using sha256 (sha256-lib) checksum algorithm
[  148.794257][ T7749] BTRFS warning (device loop0): space cache v1 is being deprecated and will be removed in a future release, please use -o space_cache=v2
[  148.890527][ T7764] loop2: detected capacity change from 0 to 136
[  149.094941][ T7749] BTRFS info (device loop0): rebuilding free space tree
[  149.142558][ T7749] BTRFS info (device loop0): disabling free space tree
[  149.145137][ T7749] BTRFS info (device loop0): clearing compat-ro feature flag for FREE_SPACE_TREE (0x1)
[  149.149753][ T7749] BTRFS info (device loop0): clearing compat-ro feature flag for FREE_SPACE_TREE_VALID (0x2)
[  149.158583][ T7749] BTRFS info (device loop0): enabling ssd optimizations
[  149.161346][ T7749] BTRFS info (device loop0): using spread ssd allocation scheme
[  149.164227][ T7749] BTRFS info (device loop0): turning on flush-on-commit
[  149.166974][ T7749] BTRFS info (device loop0): turning on sync discard
[  149.169540][ T7749] BTRFS info (device loop0): enabling disk space caching
[  149.172195][ T7749] BTRFS info (device loop0): force clearing of disk cache
[  149.175287][ T7749] BTRFS info (device loop0): enabling auto defrag
[  149.256926][ T5928] BTRFS info (device loop0): last unmount of filesystem ed167579-eb65-4e76-9a50-61ac97e9b59d
[  149.459896][ T7795] loop2: detected capacity change from 0 to 128
[  149.919929][ T7817] loop3: detected capacity change from 0 to 4096
[  149.923800][ T7817] ntfs3(loop3): Different NTFS sector size (1024) and media sector size (512).
[  150.219747][ T7837] loop0: detected capacity change from 0 to 4096
[  150.250924][ T7841] NILFS (loop0): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
[  150.297940][ T7837] NILFS error (device loop0): nilfs_dotdot: directory #12 missing '.'
[  150.316023][ T7837] Remounting filesystem read-only
[  150.319720][ T7837] NILFS (loop0): mounting fs with errors
[  150.702124][ T7849] loop0: detected capacity change from 0 to 40427
[  150.708028][ T7849] F2FS-fs (loop0): Invalid log_blocksize (268), supports only 12
[  150.711062][ T7849] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock
[  150.717885][ T7849] F2FS-fs (loop0): invalid crc value
[  150.798328][ T7849] F2FS-fs (loop0): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
[  150.812361][ T7849] F2FS-fs (loop0): Try to recover 1th superblock, ret: 0
[  150.815565][ T7849] F2FS-fs (loop0): Mounted with checkpoint version = 48b305e5
[  150.976039][ T5922] usb 4-1: new high-speed USB device number 13 using dummy_hcd
[  152.001646][ T5922] usb 4-1: New USB device found, idVendor=0bed, idProduct=1100, bcdDevice=ec.c3
[  152.005279][ T5922] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  152.021328][ T5922] usb 4-1: config 0 descriptor??
[  152.030603][ T5922] cp210x 4-1:0.0: cp210x converter detected
[  152.258049][ T7880] loop2: detected capacity change from 0 to 512
[  152.292514][ T7880] EXT4-fs error (device loop2): ext4_orphan_get:1392: inode #15: comm syz.2.774: casefold flag without casefold feature
[  152.300815][ T7880] EXT4-fs error (device loop2): ext4_orphan_get:1397: comm syz.2.774: couldn't read orphan inode 15 (err -117)
[  152.306362][ T7880] EXT4-fs (loop2): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  152.500097][ T5922] cp210x 4-1:0.0: failed to get vendor val 0x000e size 3: -32
[  152.527800][ T5922] usb 4-1: cp210x converter now attached to ttyUSB0
[  152.718120][   T33] audit: type=1804 audit(1759223509.456:52): pid=7884 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=invalid_pcr cause=open_writers comm="syz.2.774" name="/newroot/274/file0/bus" dev="loop2" ino=18 res=1 errno=0
[  152.822293][ T7884] Invalid ELF header magic: != ELF
[  152.992225][   T33] audit: type=1800 audit(1759223509.456:53): pid=7884 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed(directio) comm="syz.2.774" name="bus" dev="loop2" ino=18 res=0 errno=0
[  153.000540][   T10] usb 4-1: USB disconnect, device number 13
[  153.006500][   T10] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[  153.024046][   T10] cp210x 4-1:0.0: device disconnected
[  153.226666][ T5930] EXT4-fs (loop2): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  153.371862][ T7898] loop0: detected capacity change from 0 to 4096
[  153.512023][ T7906] comedi comedi3: 8255: I/O port conflict (0x5,4)
[  153.514970][ T7906] comedi comedi3: 8255: I/O port conflict (0x20002,4)
[  153.525817][ T7906] comedi comedi3: 8255: I/O port conflict (0xfffffffffffffffd,4)
[  153.532139][ T7906] comedi comedi3: 8255: I/O port conflict (0x5c952398,4)
[  153.535581][ T7906] comedi comedi3: 8255: I/O port conflict (0x1,4)
[  153.548858][ T7906] comedi comedi3: 8255: I/O port conflict (0x3ff,4)
[  153.551026][ T7906] comedi comedi3: 8255: I/O port conflict (0x6,4)
[  153.553090][ T7906] comedi comedi3: 8255: I/O port conflict (0x9,4)
[  153.555213][ T7906] comedi comedi3: 8255: I/O port conflict (0x1,4)
[  153.557568][ T7906] comedi comedi3: 8255: I/O port conflict (0xfffffffffffffffa,4)
[  153.560013][ T7906] comedi comedi3: 8255: I/O port conflict (0x6,4)
[  153.562313][ T7906] comedi comedi3: 8255: I/O port conflict (0x4,4)
[  153.882379][ T7924] loop3: detected capacity change from 0 to 512
[  153.898073][ T7924] EXT4-fs (loop3): orphan cleanup on readonly fs
[  153.907408][ T7924] EXT4-fs warning (device loop3): ext4_xattr_inode_get:560: inode #11: comm syz.3.793: EA inode hash validation failed
[  153.916374][ T7924] EXT4-fs warning (device loop3): ext4_expand_extra_isize_ea:2853: Unable to expand inode 15. Delete some EAs or run e2fsck.
[  153.921595][ T7924] EXT4-fs error (device loop3): ext4_do_update_inode:5624: inode #15: comm syz.3.793: corrupted inode contents
[  153.941183][ T7924] EXT4-fs error (device loop3): ext4_dirty_inode:6509: inode #15: comm syz.3.793: mark_inode_dirty error
[  153.947021][ T7924] EXT4-fs error (device loop3): ext4_do_update_inode:5624: inode #15: comm syz.3.793: corrupted inode contents
[  153.952310][ T7924] EXT4-fs error (device loop3): ext4_xattr_delete_inode:2996: inode #15: comm syz.3.793: mark_inode_dirty error
[  153.961169][ T7924] EXT4-fs error (device loop3): ext4_xattr_delete_inode:2999: inode #15: comm syz.3.793: mark inode dirty (error -117)
[  153.966564][ T7924] EXT4-fs warning (device loop3): ext4_evict_inode:274: xattr delete (err -117)
[  153.972488][ T7924] EXT4-fs (loop3): 1 orphan inode deleted
[  153.979680][ T7924] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 ro without journal. Quota mode: none.
[  154.010807][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  154.074979][ T7929] netlink: 4544 bytes leftover after parsing attributes in process `syz.2.796'.
[  155.030403][ T7946] loop0: detected capacity change from 0 to 40427
[  155.034413][ T7946] F2FS-fs (loop0): Invalid log_blocksize (268), supports only 12
[  155.038754][ T7946] F2FS-fs (loop0): Can't find valid F2FS filesystem in 1th superblock
[  155.057287][ T7946] F2FS-fs (loop0): invalid crc value
[  155.059383][ T7946] F2FS-fs (loop0): Failed to get valid F2FS checkpoint
[  155.062622][ T7954] loop3: detected capacity change from 0 to 512
[  155.081930][ T7954] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  155.085714][ T7954] ext4 filesystem being mounted at /171/file1 supports timestamps until 2038-01-19 (0x7fffffff)
[  155.209173][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  155.540125][ T7972] ip_tunnel: non-ECT from 0.0.0.0 with TOS=0x13
[  155.942713][   T33] audit: type=1326 audit(1759223512.726:54): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=7980 comm="syz.0.817" exe="/syz-executor" sig=31 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x0
[  156.136051][ T5922] usb 4-1: new high-speed USB device number 14 using dummy_hcd
[  156.286015][ T5922] usb 4-1: Using ep0 maxpacket: 8
[  156.297304][ T5922] usb 4-1: config 179 has an invalid interface number: 65 but max is 0
[  156.300172][ T5922] usb 4-1: config 179 has no interface number 0
[  156.307309][ T5922] usb 4-1: config 179 interface 65 altsetting 0 endpoint 0xF has an invalid bInterval 0, changing to 7
[  156.311338][ T5922] usb 4-1: config 179 interface 65 altsetting 0 endpoint 0xF has invalid maxpacket 1025, setting to 1024
[  156.315487][ T5922] usb 4-1: config 179 interface 65 altsetting 0 endpoint 0x83 has an invalid bInterval 0, changing to 7
[  156.321198][ T5922] usb 4-1: config 179 interface 65 altsetting 0 endpoint 0x83 has invalid maxpacket 41728, setting to 1024
[  156.324975][ T5922] usb 4-1: config 179 interface 65 altsetting 0 has 2 endpoint descriptors, different from the interface descriptor's value: 23
[  156.330169][ T5922] usb 4-1: New USB device found, idVendor=12ab, idProduct=90a3, bcdDevice=1e.eb
[  156.333462][ T5922] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  156.345826][ T7977] raw-gadget.0 gadget.3: fail, usb_ep_enable returned -22
[  156.562636][ T5922] input: Generic X-Box pad as /devices/platform/dummy_hcd.3/usb4/4-1/4-1:179.65/input/input9
[  156.677789][ T7994] loop2: detected capacity change from 0 to 1024
[  156.693108][ T7994] EXT4-fs (loop2): ext4_check_descriptors: Inode bitmap for group 0 overlaps block group descriptors
[  156.698461][ T7994] EXT4-fs (loop2): ext4_check_descriptors: Checksum for group 0 failed (51554!=20869)
[  156.719206][ T7994] JBD2: no valid journal superblock found
[  156.721643][ T7994] EXT4-fs (loop2): Could not load journal inode
[  156.759524][   T10] usb 4-1: USB disconnect, device number 14
[  156.759694][    C1] xpad 4-1:179.65: xpad_irq_out - usb_submit_urb failed with result -19
[  156.765601][    C1] dummy_hcd dummy_hcd.3: timer fired with no URBs pending?
[  156.856460][ T7998] netlink: 'syz.2.823': attribute type 4 has an invalid length.
[  156.939831][   T33] audit: type=1326 audit(1759223513.726:55): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8003 comm="syz.0.827" exe="/syz-executor" sig=31 arch=c000003e syscall=202 compat=0 ip=0x7f50e018ec29 code=0x0
[  156.951775][ T8002] loop2: detected capacity change from 0 to 2048
[  156.958123][ T8002] UDF-fs: error (device loop2): udf_read_tagged: tag checksum failed, block 99: 0x27 != 0x4d
[  157.379637][ T8024] loop3: detected capacity change from 0 to 128
[  157.528131][ T8030] loop3: detected capacity change from 0 to 16
[  157.546957][ T8030] erofs (device loop3): mounted with root inode @ nid 36.
[  157.708532][ T8036] loop3: detected capacity change from 0 to 256
[  157.732013][ T8036] exFAT-fs (loop3): failed to load upcase table (idx : 0x00011d5f, chksum : 0x09863542, utbl_chksum : 0x000cd30d)
[  157.852822][ T8041] tc_dump_action: action bad kind
[  157.869487][ T8043] loop0: detected capacity change from 0 to 512
[  157.874995][ T8043] EXT4-fs (loop0): encrypted files will use data=ordered instead of data journaling mode
[  157.898982][ T8043] EXT4-fs warning (device loop0): ext4_expand_extra_isize_ea:2853: Unable to expand inode 15. Delete some EAs or run e2fsck.
[  157.906294][ T8043] EXT4-fs (loop0): 1 truncate cleaned up
[  157.909861][ T8043] EXT4-fs (loop0): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  157.927126][   T33] audit: type=1800 audit(1759223514.706:56): pid=8043 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed(directio) comm="syz.0.844" name="file2" dev="loop0" ino=16 res=0 errno=0
[  157.927330][ T8043] EXT4-fs (loop0): shut down requested (2)
[  157.953927][ T5928] EXT4-fs (loop0): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  158.021373][ T8049] Bluetooth: hci1: Opcode 0x080f failed: -4
[  158.146412][ T8059] netlink: 'syz.0.850': attribute type 1 has an invalid length.
[  158.191439][ T8059] bond1: (slave bridge1): making interface the new active one
[  158.197513][ T8059] bond1: (slave bridge1): Enslaving as an active interface with an up link
[  158.715968][ T5922] usb 4-1: new high-speed USB device number 15 using dummy_hcd
[  158.896022][ T5922] usb 4-1: Using ep0 maxpacket: 32
[  158.901492][ T5922] usb 4-1: New USB device found, idVendor=0fd9, idProduct=0025, bcdDevice=29.40
[  158.907314][ T5922] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  158.915527][ T5922] usb 4-1: config 0 descriptor??
[  159.077655][ T8072] loop2: detected capacity change from 0 to 32768
[  159.094468][ T8072] XFS (loop2): Mounting V5 Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791
[  159.110824][ T8072] XFS (loop2): Ending clean mount
[  159.131277][ T5930] XFS (loop2): Unmounting Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791
[  159.204982][ T5922] dvb-usb: found a 'Elgato EyeTV Sat' in warm state.
[  159.226706][ T5922] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[  159.236895][ T5922] dvbdev: DVB: registering new adapter (Elgato EyeTV Sat)
[  159.239575][ T5922] usb 4-1: media controller created
[  159.282900][ T5922] dvbdev: dvb_create_media_entity: media entity 'dvb-demux' registered.
[  159.307094][ T5926] sysfs: cannot create duplicate filename '/devices/virtual/bluetooth/hci1/hci1:201'
[  159.311102][ T5926] CPU: 1 UID: 0 PID: 5926 Comm: kworker/u11:2 Not tainted syzkaller #0 PREEMPT(full) 
[  159.311149][ T5926] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[  159.311159][ T5926] Workqueue: hci1 hci_rx_work
[  159.311179][ T5926] Call Trace:
[  159.311211][ T5926]  <TASK>
[  159.311231][ T5926]  dump_stack_lvl+0x189/0x250
[  159.311252][ T5926]  ? __pfx_dump_stack_lvl+0x10/0x10
[  159.311269][ T5926]  ? __pfx__printk+0x10/0x10
[  159.311290][ T5926]  ? kernfs_path_from_node+0x250/0x290
[  159.311301][ T5926]  ? kernfs_path_from_node+0x2f/0x290
[  159.311316][ T5926]  sysfs_create_dir_ns+0x259/0x280
[  159.311339][ T5926]  ? __pfx_sysfs_create_dir_ns+0x10/0x10
[  159.311356][ T5926]  ? do_raw_spin_unlock+0x4d/0x240
[  159.311373][ T5926]  kobject_add_internal+0x59f/0xb40
[  159.311398][ T5926]  kobject_add+0x155/0x220
[  159.311421][ T5926]  ? __pfx_kobject_add+0x10/0x10
[  159.311440][ T5926]  ? _raw_spin_unlock+0x28/0x50
[  159.311458][ T5926]  ? get_device_parent+0x366/0x3a0
[  159.311481][ T5926]  device_add+0x408/0xb50
[  159.311503][ T5926]  hci_conn_add_sysfs+0xd5/0x1e0
[  159.311527][ T5926]  le_conn_complete_evt+0xf39/0x1500
[  159.311555][ T5926]  ? __pfx_le_conn_complete_evt+0x10/0x10
[  159.311573][ T5926]  ? __mutex_unlock_slowpath+0x1a1/0x740
[  159.311589][ T5926]  ? __asan_memcpy+0x40/0x70
[  159.311607][ T5926]  ? __pfx___mutex_unlock_slowpath+0x10/0x10
[  159.311622][ T5926]  ? skb_pull_data+0xfb/0x200
[  159.311645][ T5926]  hci_le_conn_complete_evt+0x187/0x450
[  159.311669][ T5926]  hci_event_packet+0x78f/0x1200
[  159.311686][ T5926]  ? __pfx_hci_le_meta_evt+0x10/0x10
[  159.311702][ T5926]  ? __pfx_hci_event_packet+0x10/0x10
[  159.311717][ T5926]  ? kcov_remote_start+0x4d3/0x7f0
[  159.311737][ T5926]  ? local_clock_noinstr+0xe0/0xe0
[  159.311752][ T5926]  ? hci_send_to_monitor+0xe2/0x570
[  159.311773][ T5926]  hci_rx_work+0x46a/0xe80
[  159.311792][ T5926]  ? process_scheduled_works+0x9ef/0x17b0
[  159.311815][ T5926]  process_scheduled_works+0xae1/0x17b0
[  159.311859][ T5926]  ? __pfx_process_scheduled_works+0x10/0x10
[  159.311891][ T5926]  worker_thread+0x8a0/0xda0
[  159.311914][ T5926]  ? __pfx__raw_spin_unlock_irqrestore+0x10/0x10
[  159.311934][ T5926]  ? __kthread_parkme+0x7b/0x200
[  159.311954][ T5926]  kthread+0x711/0x8a0
[  159.311970][ T5926]  ? __pfx_worker_thread+0x10/0x10
[  159.311991][ T5926]  ? __pfx_kthread+0x10/0x10
[  159.312008][ T5926]  ? _raw_spin_unlock_irq+0x23/0x50
[  159.312023][ T5926]  ? lockdep_hardirqs_on+0x9c/0x150
[  159.312038][ T5926]  ? __pfx_kthread+0x10/0x10
[  159.312054][ T5926]  ret_from_fork+0x4bc/0x870
[  159.312075][ T5926]  ? __pfx_ret_from_fork+0x10/0x10
[  159.312098][ T5926]  ? __switch_to_asm+0x39/0x70
[  159.312113][ T5926]  ? __switch_to_asm+0x33/0x70
[  159.312163][ T5926]  ? __pfx_kthread+0x10/0x10
[  159.312181][ T5926]  ret_from_fork_asm+0x1a/0x30
[  159.312208][ T5926]  </TASK>
[  159.312306][ T5926] kobject: kobject_add_internal failed for hci1:201 with -EEXIST, don't try to register things with the same name in the same directory.
[  159.426931][ T5922] az6027: usb out operation failed. (-71)
[  159.429365][ T5926] Bluetooth: hci1: failed to register connection device
[  159.433758][ T5922] az6027: usb out operation failed. (-71)
[  159.436654][ T5922] stb0899_attach: Driver disabled by Kconfig
[  159.439093][ T5922] az6027: no front-end attached
[  159.439093][ T5922] 
[  159.443051][ T5922] az6027: usb out operation failed. (-71)
[  159.445273][ T5922] dvb-usb: no frontend was attached by 'Elgato EyeTV Sat'
[  159.449793][ T5922] input: IR-receiver inside an USB DVB receiver as /devices/platform/dummy_hcd.3/usb4/4-1/input/input10
[  159.455496][ T5922] dvb-usb: schedule remote query interval to 400 msecs.
[  159.458640][ T5922] dvb-usb: Elgato EyeTV Sat successfully initialized and connected.
[  159.464164][ T5922] usb 4-1: USB disconnect, device number 15
[  159.486650][ T5922] dvb-usb: Elgato EyeTV Sat successfully deinitialized and disconnected.
[  159.556285][   T10] usb 3-1: new high-speed USB device number 12 using dummy_hcd
[  159.875993][   T10] usb 3-1: Using ep0 maxpacket: 16
[  159.879372][   T10] usb 3-1: config 1 has an invalid descriptor of length 0, skipping remainder of the config
[  159.893997][   T10] usb 3-1: config 1 has 1 interface, different from the descriptor's value: 3
[  159.952842][   T10] usb 3-1: New USB device found, idVendor=1d6b, idProduct=0101, bcdDevice= 0.40
[  159.956294][   T10] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  159.958797][   T10] usb 3-1: Product: syz
[  159.960231][   T10] usb 3-1: Manufacturer: syz
[  159.961740][   T10] usb 3-1: SerialNumber: syz
[  160.056724][ T5934] Bluetooth: hci1: command 0x080f tx timeout
[  160.176824][ T8092] loop3: detected capacity change from 0 to 32768
[  160.209829][ T8092] XFS (loop3): Mounting V5 Filesystem ed37bf6e-74ea-4e01-afba-5fee274b0f3a
[  160.222992][ T8092] XFS (loop3): Ending clean mount
[  160.229905][ T8092] XFS (loop3): Quotacheck needed: Please wait.
[  160.255540][ T8092] XFS (loop3): Quotacheck: Done.
[  160.277660][ T6378] XFS (loop3): Unmounting Filesystem ed37bf6e-74ea-4e01-afba-5fee274b0f3a
[  160.377456][   T10] usb 3-1: 0:2 : does not exist
[  160.483368][ T8104] bridge: RTM_NEWNEIGH bridge0 without NUD_PERMANENT
[  160.781555][   T10] usb 3-1: 5:0: failed to get current value for ch 0 (-22)
[  160.793649][   T10] usb 3-1: USB disconnect, device number 12
[  160.884655][ T8114] netlink: 8 bytes leftover after parsing attributes in process `syz.0.864'.
[  161.157013][ T5974] usb 4-1: new high-speed USB device number 16 using dummy_hcd
[  161.306051][ T5974] usb 4-1: Using ep0 maxpacket: 32
[  161.310827][ T5974] usb 4-1: config 0 interface 0 has no altsetting 0
[  161.315493][ T5974] usb 4-1: New USB device found, idVendor=16d0, idProduct=10b8, bcdDevice=de.8e
[  161.319258][ T5974] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  161.322218][ T5974] usb 4-1: Product: syz
[  161.323810][ T5974] usb 4-1: Manufacturer: syz
[  161.325560][ T5974] usb 4-1: SerialNumber: syz
[  161.330475][ T5974] usb 4-1: config 0 descriptor??
[  161.334566][ T5974] gs_usb 4-1:0.0: Required endpoints not found
[  161.449613][ T8118] loop2: detected capacity change from 0 to 512
[  161.462211][ T8118] EXT4-fs (loop2): mounted filesystem 00000000-0000-0000-0000-000000d40000 r/w without journal. Quota mode: writeback.
[  161.467320][ T8118] ext4 filesystem being mounted at /312/file0aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa supports timestamps until 2038-01-19 (0x7fffffff)
[  161.552754][ T5989] usb 4-1: USB disconnect, device number 16
[  161.869911][   T13] netdevsim netdevsim0 netdevsim3 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  161.927401][   T13] netdevsim netdevsim0 netdevsim2 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  161.985484][   T13] netdevsim netdevsim0 netdevsim1 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  162.032924][   T13] netdevsim netdevsim0  (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  162.115464][ T5926] Bluetooth: hci1: unexpected cc 0x0c03 length: 249 > 1
[  162.123406][ T5926] Bluetooth: hci1: unexpected cc 0x1003 length: 249 > 9
[  162.130555][ T5926] Bluetooth: hci1: unexpected cc 0x1001 length: 249 > 9
[  162.134249][ T5926] Bluetooth: hci1: unexpected cc 0x0c23 length: 249 > 4
[  162.137940][ T5926] Bluetooth: hci1: unexpected cc 0x0c38 length: 249 > 2
[  162.307062][ T5930] EXT4-fs (loop2): unmounting filesystem 00000000-0000-0000-0000-000000d40000.
[  162.335988][   T13] bridge_slave_1: left allmulticast mode
[  162.338604][   T13] bridge_slave_1: left promiscuous mode
[  162.340718][   T13] bridge0: port 2(bridge_slave_1) entered disabled state
[  162.363200][   T13] bridge_slave_0: left allmulticast mode
[  162.381635][   T13] bridge_slave_0: left promiscuous mode
[  162.389067][   T13] bridge0: port 1(bridge_slave_0) entered disabled state
[  162.970574][ T8142] loop2: detected capacity change from 0 to 16
[  162.974610][ T8142] erofs (device loop2): mounted with root inode @ nid 36.
[  163.051032][ T8142] erofs (device loop2): bogus lookback distance 1388 @ lcn 42 of nid 36
[  163.080594][ T8142] erofs (device loop2): failed to decompress -29 in[58, 4038] out[1851]
[  163.080915][   T13] bond1 (unregistering): (slave bridge1): Releasing active interface
[  163.083962][ T8142] erofs (device loop2): read error -117 @ 43 of nid 36
[  163.181907][ T8143] erofs (device loop2): bogus lookback distance 1388 @ lcn 42 of nid 36
[  163.185475][ T8143] erofs (device loop2): bogus lookback distance 1388 @ lcn 42 of nid 36
[  163.190281][ T8143] erofs (device loop2): readahead error at folio 42 @ nid 36
[  163.200687][ T8143] erofs (device loop2): bogus lookback distance 774 @ lcn 40 of nid 36
[  163.203959][ T8143] erofs (device loop2): readahead error at folio 41 @ nid 36
[  163.208410][ T8143] erofs (device loop2): bogus lookback distance 774 @ lcn 40 of nid 36
[  163.224341][ T8143] erofs (device loop2): readahead error at folio 40 @ nid 36
[  163.235079][ T8143] erofs (device loop2): readahead error at folio 39 @ nid 36
[  163.238510][ T8143] erofs (device loop2): readahead error at folio 38 @ nid 36
[  163.241936][ T8143] erofs (device loop2): readahead error at folio 36 @ nid 36
[  163.253331][ T8143] erofs (device loop2): bogus lookback distance 1468 @ lcn 31 of nid 36
[  163.256988][ T8143] erofs (device loop2): readahead error at folio 31 @ nid 36
[  163.268878][ T8143] erofs (device loop2): readahead error at folio 25 @ nid 36
[  163.271854][ T8143] erofs (device loop2): readahead error at folio 24 @ nid 36
[  163.282448][ T8143] erofs (device loop2): readahead error at folio 19 @ nid 36
[  163.287658][ T8143] syz.2.877: attempt to access beyond end of device
[  163.287658][ T8143] loop2: rw=524288, sector=784, nr_sectors = 64 limit=16
[  163.301154][ T8143] syz.2.877: attempt to access beyond end of device
[  163.301154][ T8143] loop2: rw=524288, sector=13478624080, nr_sectors = 24 limit=16
[  163.314932][ T8143] syz.2.877: attempt to access beyond end of device
[  163.314932][ T8143] loop2: rw=524288, sector=13478624032, nr_sectors = 48 limit=16
[  163.330284][ T8143] erofs (device loop2): failed to decompress -29 in[58, 4038] out[2639]
[  163.335380][ T8143] erofs (device loop2): bogus lookback distance 1586 @ lcn 46 of nid 36
[  163.346509][ T8143] erofs (device loop2): readahead error at folio 47 @ nid 36
[  163.349960][  T794] usb 4-1: new high-speed USB device number 17 using dummy_hcd
[  163.353632][ T8143] erofs (device loop2): bogus lookback distance 1586 @ lcn 46 of nid 36
[  163.365460][ T8143] erofs (device loop2): readahead error at folio 46 @ nid 36
[  163.369511][ T8143] erofs (device loop2): readahead error at folio 45 @ nid 36
[  163.379870][ T8143] syz.2.877: attempt to access beyond end of device
[  163.379870][ T8143] loop2: rw=524288, sector=16, nr_sectors = 16 limit=16
[  163.393355][ T8143] erofs (device loop2): failed to decompress -29 in[58, 4038] out[3537]
[  163.397787][   T13] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[  163.412946][   T13] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[  163.418133][   T13] bond0 (unregistering): Released all slaves
[  163.431288][   T13] bond1 (unregistering): Released all slaves
[  163.523388][  T794] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[  163.527969][  T794] usb 4-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[  163.533602][  T794] usb 4-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 21
[  163.545978][  T794] usb 4-1: New USB device found, idVendor=047f, idProduct=ffff, bcdDevice= 0.00
[  163.553137][  T794] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  163.606791][  T794] usb 4-1: config 0 descriptor??
[  163.638096][ T8127] chnl_net:caif_netlink_parms(): no params data found
[  163.964841][   T13] hsr_slave_0: left promiscuous mode
[  163.969897][   T13] hsr_slave_1: left promiscuous mode
[  163.973252][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_0
[  163.979846][   T13] batman_adv: batadv0: Removing interface: batadv_slave_0
[  163.984443][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_1
[  163.988717][   T13] batman_adv: batadv0: Removing interface: batadv_slave_1
[  163.991772][ T8155] ip6_tunnel: non-ECT from fc02:0000:0000:0000:0000:0000:0000:0000 with DS=0x6
[  164.020500][   T13] veth1_macvtap: left promiscuous mode
[  164.022847][   T13] veth0_macvtap: left promiscuous mode
[  164.025255][   T13] veth1_vlan: left promiscuous mode
[  164.036747][   T13] veth0_vlan: left promiscuous mode
[  164.041249][  T794] plantronics 0003:047F:FFFF.0008: hiddev0,hidraw0: USB HID v0.40 Device [HID 047f:ffff] on usb-dummy_hcd.3-1/input0
[  164.220517][ T5934] Bluetooth: hci1: command tx timeout
[  164.390065][ T8161] trusted_key: encrypted_key: insufficient parameters specified
[  164.398818][ T8161] trusted_key: encrypted_key: insufficient parameters specified
[  164.787637][   T13] team0 (unregistering): Port device team_slave_1 removed
[  164.831963][   T13] team0 (unregistering): Port device team_slave_0 removed
[  165.168193][ T8170] sctp: [Deprecated]: syz.2.886 (pid 8170) Use of int in max_burst socket option deprecated.
[  165.168193][ T8170] Use struct sctp_assoc_value instead
[  165.417787][ T8127] bridge0: port 1(bridge_slave_0) entered blocking state
[  165.426247][ T8127] bridge0: port 1(bridge_slave_0) entered disabled state
[  165.429131][ T8127] bridge_slave_0: entered allmulticast mode
[  165.432836][ T8127] bridge_slave_0: entered promiscuous mode
[  165.448834][ T8127] bridge0: port 2(bridge_slave_1) entered blocking state
[  165.451724][ T8127] bridge0: port 2(bridge_slave_1) entered disabled state
[  165.454641][ T8127] bridge_slave_1: entered allmulticast mode
[  165.467628][ T8127] bridge_slave_1: entered promiscuous mode
[  165.519798][ T8127] bond0: (slave bond_slave_0): Enslaving as an active interface with an up link
[  165.525518][ T8127] bond0: (slave bond_slave_1): Enslaving as an active interface with an up link
[  165.546115][ T8127] team0: Port device team_slave_0 added
[  165.550670][ T8127] team0: Port device team_slave_1 added
[  165.595101][ T8174] loop2: detected capacity change from 0 to 40427
[  165.598820][ T8174] F2FS-fs: heap/no_heap options were deprecated
[  165.602309][ T8127] batman_adv: batadv0: Adding interface: batadv_slave_0
[  165.603637][ T8174] F2FS-fs (loop2): Mismatch start address, segment0(0) cp_blkaddr(512)
[  165.604462][ T8127] batman_adv: batadv0: The MTU of interface batadv_slave_0 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[  165.608958][ T8174] F2FS-fs (loop2): Can't find valid F2FS filesystem in 1th superblock
[  165.617039][ T8127] batman_adv: batadv0: Not using interface batadv_slave_0 (retrying later): interface not active
[  165.623454][ T8174] F2FS-fs (loop2): invalid crc value
[  165.653763][ T8127] batman_adv: batadv0: Adding interface: batadv_slave_1
[  165.661418][ T8127] batman_adv: batadv0: The MTU of interface batadv_slave_1 is too small (1500) to handle the transport of batman-adv packets. Packets going over this interface will be fragmented on layer2 which could impact the performance. Setting the MTU to 1532 would solve the problem.
[  165.679361][ T8127] batman_adv: batadv0: Not using interface batadv_slave_1 (retrying later): interface not active
[  165.712424][ T8174] F2FS-fs (loop2): f2fs_recover_fsync_data: recovery fsync data, check_only: 1
[  165.717837][ T8174] F2FS-fs (loop2): Start checkpoint disabled!
[  165.734410][ T8174] F2FS-fs (loop2): f2fs_disable_checkpoint() finish, err:0
[  165.739795][ T8174] F2FS-fs (loop2): Try to recover 1th superblock, ret: 0
[  165.742787][ T8174] F2FS-fs (loop2): Mounted with checkpoint version = 48b305e6
[  165.752967][ T8127] hsr_slave_0: entered promiscuous mode
[  165.757051][ T8127] hsr_slave_1: entered promiscuous mode
[  165.760109][ T8127] debugfs: 'hsr0' already exists in 'hsr'
[  165.762211][ T8127] Cannot create hsr debugfs directory
[  165.971027][ T8127] netdevsim netdevsim4 netdevsim0: renamed from eth0
[  165.977964][ T8127] netdevsim netdevsim4 netdevsim1: renamed from eth1
[  165.984358][ T8127] netdevsim netdevsim4 netdevsim2: renamed from eth2
[  165.992451][ T8127] netdevsim netdevsim4 netdevsim3: renamed from eth3
[  166.077454][ T8127] 8021q: adding VLAN 0 to HW filter on device bond0
[  166.099671][ T8127] 8021q: adding VLAN 0 to HW filter on device team0
[  166.111354][ T6566] bridge0: port 1(bridge_slave_0) entered blocking state
[  166.114210][ T6566] bridge0: port 1(bridge_slave_0) entered forwarding state
[  166.127615][ T6566] bridge0: port 2(bridge_slave_1) entered blocking state
[  166.130726][ T6566] bridge0: port 2(bridge_slave_1) entered forwarding state
[  166.290163][ T5934] Bluetooth: hci1: command tx timeout
[  166.361954][ T8127] 8021q: adding VLAN 0 to HW filter on device batadv0
[  166.522555][ T5931] usb 4-1: USB disconnect, device number 17
[  166.619516][   T33] audit: type=1326 audit(1759223523.396:57): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.634959][ T8127] veth0_vlan: entered promiscuous mode
[  166.651930][   T33] audit: type=1326 audit(1759223523.396:58): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.663686][ T8127] veth1_vlan: entered promiscuous mode
[  166.676396][   T33] audit: type=1326 audit(1759223523.416:59): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.697415][   T33] audit: type=1326 audit(1759223523.416:60): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.704122][   T33] audit: type=1326 audit(1759223523.416:61): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=4 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.716026][   T33] audit: type=1326 audit(1759223523.416:62): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.720391][ T8127] veth0_macvtap: entered promiscuous mode
[  166.723094][   T33] audit: type=1326 audit(1759223523.416:63): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.723130][   T33] audit: type=1326 audit(1759223523.426:64): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.739820][ T8127] veth1_macvtap: entered promiscuous mode
[  166.759037][ T8127] batman_adv: batadv0: Interface activated: batadv_slave_0
[  166.776679][   T33] audit: type=1326 audit(1759223523.426:65): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=436 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.783113][   T33] audit: type=1326 audit(1759223523.426:66): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8207 comm="syz.3.895" exe="/syz-executor" sig=0 arch=c000003e syscall=231 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  166.789181][ T8127] batman_adv: batadv0: Interface activated: batadv_slave_1
[  166.800182][ T8200] loop2: detected capacity change from 0 to 40427
[  166.802863][ T8200] F2FS-fs: heap/no_heap options were deprecated
[  166.808729][ T8200] F2FS-fs (loop2): invalid crc value
[  166.844507][ T8200] F2FS-fs (loop2): f2fs_recover_fsync_data: recovery fsync data, check_only: 1
[  166.849201][ T8200] F2FS-fs (loop2): Start checkpoint disabled!
[  166.854642][ T8200] F2FS-fs (loop2): f2fs_disable_checkpoint() finish, err:0
[  166.865365][   T13] netdevsim netdevsim4 netdevsim0: set [1, 0] type 2 family 0 port 6081 - 0
[  166.869141][   T13] netdevsim netdevsim4 netdevsim1: set [1, 0] type 2 family 0 port 6081 - 0
[  166.876465][   T13] netdevsim netdevsim4 netdevsim2: set [1, 0] type 2 family 0 port 6081 - 0
[  166.882304][ T8200] F2FS-fs (loop2): Mounted with checkpoint version = 48b305e6
[  166.891029][ T5942] netdevsim netdevsim4 netdevsim3: set [1, 0] type 2 family 0 port 6081 - 0
[  166.964602][ T6566] wlan0: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[  166.967175][ T6566] wlan0: Creating new IBSS network, BSSID 50:50:50:50:50:50
[  166.987705][ T6563] wlan1: Created IBSS using preconfigured BSSID 50:50:50:50:50:50
[  166.990231][ T6563] wlan1: Creating new IBSS network, BSSID 50:50:50:50:50:50
[  167.722628][ T8229] loop3: detected capacity change from 0 to 16
[  167.730032][ T8229] erofs (device loop3): mounted with root inode @ nid 36.
[  167.828920][ T8235] loop2: detected capacity change from 0 to 128
[  167.842280][ T8235] hpfs: filesystem error: invalid number of hotfixes: 2066844986, used: 2066844985; already mounted read-only
[  167.851438][ T8235] hpfs: filesystem error: improperly stopped
[  167.853853][ T8235] hpfs: filesystem error: warning: spare dnodes used, try chkdsk
[  167.857581][ T8235] hpfs: You really don't want any checks? You are crazy...
[  167.867016][ T8235] hpfs: hpfs_map_sector(): read error
[  167.869136][ T8235] hpfs: code page support is disabled
[  167.872499][ T8235] hpfs: hpfs_map_4sectors(): unaligned read
[  167.874984][ T8235] hpfs: hpfs_map_4sectors(): unaligned read
[  167.877451][ T8235] hpfs: filesystem error: unable to find root dir
[  168.366492][ T5934] Bluetooth: hci1: command tx timeout
[  169.104850][ T8267] netlink: 180 bytes leftover after parsing attributes in process `syz.4.917'.
[  169.520012][ T8278] ref_ctr going negative. vaddr: 0x200000ffc002, curr val: -29824, delta: 1
[  169.523358][ T8278] ref_ctr increment failed for inode: 0x433 offset: 0x5 ref_ctr_offset: 0x2 of mm: 0xffff88802c012b00
[  169.709582][ T8283] IPv6: RTM_NEWROUTE with no NLM_F_CREATE or NLM_F_REPLACE
[  169.712828][ T8283] IPv6: NLM_F_CREATE should be set when creating new route
[  169.766169][ T8290] loop4: detected capacity change from 0 to 512
[  169.768521][ T8290] EXT4-fs: inline encryption not supported
[  169.770555][ T8290] EXT4-fs: Ignoring removed nobh option
[  169.799951][ T8290] EXT4-fs warning (device loop4): dx_probe:846: Directory (ino: 2) htree depth 0x0002 exceedsupported value
[  169.808803][ T8290] EXT4-fs warning (device loop4): dx_probe:849: Enable large directory feature to access it
[  169.812694][ T8290] EXT4-fs warning (device loop4): dx_probe:934: inode #2: comm syz.4.928: Corrupt directory, running e2fsck is recommended
[  169.819898][ T8290] EXT4-fs (loop4): Cannot turn on journaled quota: type 1: error -117
[  169.823363][ T8290] EXT4-fs error (device loop4): ext4_iget_extra_inode:5075: inode #15: comm syz.4.928: corrupted in-inode xattr: invalid ea_ino
[  169.823770][ T8294] netlink: 16 bytes leftover after parsing attributes in process `syz.2.929'.
[  169.828838][ T8290] EXT4-fs error (device loop4): ext4_orphan_get:1397: comm syz.4.928: couldn't read orphan inode 15 (err -117)
[  169.836821][ T8290] EXT4-fs (loop4): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  169.862489][ T8290] EXT4-fs warning (device loop4): dx_probe:846: Directory (ino: 2) htree depth 0x0002 exceedsupported value
[  169.867983][ T8290] EXT4-fs warning (device loop4): dx_probe:849: Enable large directory feature to access it
[  169.871975][ T8290] EXT4-fs warning (device loop4): dx_probe:934: inode #2: comm syz.4.928: Corrupt directory, running e2fsck is recommended
[  169.880625][ T8290] EXT4-fs warning (device loop4): dx_probe:846: Directory (ino: 2) htree depth 0x0002 exceedsupported value
[  169.885450][ T8290] EXT4-fs warning (device loop4): dx_probe:849: Enable large directory feature to access it
[  169.891898][ T8290] EXT4-fs warning (device loop4): dx_probe:934: inode #2: comm syz.4.928: Corrupt directory, running e2fsck is recommended
[  169.906880][ T8290] EXT4-fs warning (device loop4): dx_probe:846: Directory (ino: 2) htree depth 0x0002 exceedsupported value
[  169.910409][ T8296] A link change request failed with some changes committed already. Interface bond0 may have been left with an inconsistent configuration, please check.
[  169.911633][ T8290] EXT4-fs warning (device loop4): dx_probe:849: Enable large directory feature to access it
[  169.924354][ T8290] EXT4-fs warning (device loop4): dx_probe:934: inode #2: comm syz.4.928: Corrupt directory, running e2fsck is recommended
[  169.957927][ T8290] EXT4-fs warning (device loop4): dx_probe:846: Directory (ino: 2) htree depth 0x0002 exceedsupported value
[  170.010005][ T8127] EXT4-fs (loop4): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  170.172033][ T8308] loop4: detected capacity change from 0 to 256
[  170.292339][ T8321] loop3: detected capacity change from 0 to 256
[  170.311926][ T8321] exFAT-fs (loop3): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  170.318179][ T8321] exFAT-fs (loop3): Medium has reported failures. Some data may be lost.
[  170.327480][ T8325] nbd: nbd2 already in use
[  170.333316][ T8321] exFAT-fs (loop3): failed to load upcase table (idx : 0x00010000, chksum : 0xe62de5da, utbl_chksum : 0xe619d30d)
[  170.338663][ T8321] exFAT-fs (loop3): failed to load alloc-bitmap
[  170.341181][ T8321] exFAT-fs (loop3): failed to recognize exfat type
[  170.372913][ T8324] netlink: 'syz.4.944': attribute type 10 has an invalid length.
[  170.380763][ T8324] bond0: (slave wlan1): Enslaving as an active interface with an up link
[  170.446218][ T5934] Bluetooth: hci1: command tx timeout
[  170.565986][ T8338] netlink: 'syz.3.950': attribute type 1 has an invalid length.
[  170.575781][ T8327] loop2: detected capacity change from 0 to 32768
[  170.599991][ T8327] XFS (loop2): Mounting V5 Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791
[  170.618583][ T8327] XFS (loop2): Ending clean mount
[  170.705239][ T5930] XFS (loop2): Unmounting Filesystem bfdc47fc-10d8-4eed-a562-11a831b3f791
[  170.708844][ T5931] usb 5-1: new high-speed USB device number 2 using dummy_hcd
[  170.851126][ T8356] loop6: detected capacity change from 0 to 524287487
[  170.854926][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.859702][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.863572][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.868966][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.872171][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.875535][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.879214][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.882681][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.887582][ T5931] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[  170.891867][ T5931] usb 5-1: New USB device found, idVendor=04b4, idProduct=bca1, bcdDevice= 0.00
[  170.896076][ T5931] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  170.906130][ T8356] ldm_validate_partition_table(): Disk read failed.
[  170.908278][ T5931] usb 5-1: config 0 descriptor??
[  170.908728][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.914672][ T8356] Buffer I/O error on dev loop6, logical block 0, async page read
[  170.918085][ T8356] Dev loop6: unable to read RDB block 0
[  170.921114][ T8356]  loop6: unable to read partition table
[  170.923401][ T8356] loop_reread_partitions: partition scan of loop6 (3xC) failed (rc=-5)
[  171.410340][ T8365] futex_wake_op: syz.3.958 tries to shift op by -1; fix this program
[  171.567478][ T5931] cypress 0003:04B4:BCA1.0009: item fetching failed at offset 0/3
[  171.575278][ T5931] cypress 0003:04B4:BCA1.0009: parse failed
[  171.578027][ T5931] cypress 0003:04B4:BCA1.0009: probe with driver cypress failed with error -22
[  171.855291][ T5931] usb 5-1: USB disconnect, device number 2
[  172.106579][ T8375] loop2: detected capacity change from 0 to 1764
[  172.320414][   T13] nci: nci_rsp_packet: unknown rsp opcode 0x902
[  173.357599][   T33] kauditd_printk_skb: 1 callbacks suppressed
[  173.357617][   T33] audit: type=1326 audit(1759223530.126:68): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8405 comm="syz.3.974" exe="/syz-executor" sig=9 arch=c000003e syscall=231 compat=0 ip=0x7f62bb58ec29 code=0x0
[  173.896118][ T5974] usb 3-1: new full-speed USB device number 13 using dummy_hcd
[  174.054302][ T5974] usb 3-1: config 9 has an invalid interface number: 158 but max is 1
[  174.059216][ T5974] usb 3-1: config 9 has no interface number 1
[  174.066403][ T5974] usb 3-1: config 9 interface 158 has no altsetting 0
[  174.073956][ T5974] usb 3-1: config 9 interface 0 has no altsetting 0
[  174.085516][ T5974] usb 3-1: New USB device found, idVendor=0bb4, idProduct=0a0b, bcdDevice=3e.fe
[  174.090851][ T5974] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  174.095084][ T5974] usb 3-1: Product: syz
[  174.099174][ T5974] usb 3-1: Manufacturer: syz
[  174.101347][ T5974] usb 3-1: SerialNumber: syz
[  174.430693][ T5974] usb 3-1: bad CDC descriptors
[  174.488329][ T5974] usb 3-1: USB disconnect, device number 13
[  174.585792][ T8436] veth3: entered promiscuous mode
[  174.870345][ T5934] Bluetooth: hci1: Malformed Event: 0x02
[  174.918345][ T8452] loop4: detected capacity change from 0 to 2048
[  174.941014][ T8452] EXT4-fs (loop4): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: none.
[  174.997393][ T8457] loop2: detected capacity change from 0 to 256
[  175.011346][ T8127] EXT4-fs (loop4): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  175.024998][ T8457] exFAT-fs (loop2): failed to read boot sector
[  175.029144][ T8457] exFAT-fs (loop2): failed to recognize exfat type
[  175.049064][ T8446] loop3: detected capacity change from 0 to 32768
[  175.053600][ T8446] BTRFS: device fsid e417788f-7a09-42b2-9266-8ddc5d5d35d2 devid 1 transid 8 /dev/loop3 (7:3) scanned by syz.3.991 (8446)
[  175.062715][ T8446] BTRFS info (device loop3): first mount of filesystem e417788f-7a09-42b2-9266-8ddc5d5d35d2
[  175.067165][ T8446] BTRFS info (device loop3): using xxhash64 (xxhash64-generic) checksum algorithm
[  175.116986][ T8446] BTRFS info (device loop3): enabling ssd optimizations
[  175.120197][ T8446] BTRFS info (device loop3): enabling free space tree
[  175.148226][ T8476] loop4: detected capacity change from 0 to 4096
[  175.157616][ T8476] EXT4-fs (loop4): Test dummy encryption mode enabled
[  175.165752][ T6378] BTRFS info (device loop3): last unmount of filesystem e417788f-7a09-42b2-9266-8ddc5d5d35d2
[  175.180115][ T8476] [EXT4 FS bs=4096, gc=1, bpg=524288, ipg=32, mo=a842c018, mo2=0003]
[  175.183983][ T8476] System zones: 0-5
[  175.209025][ T8476] EXT4-fs (loop4): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  175.249694][ T8483] loop2: detected capacity change from 0 to 128
[  175.253843][ T8483] EXT4-fs: Ignoring removed nobh option
[  175.273818][ T8483] EXT4-fs (loop2): mounted filesystem 76b65be2-f6da-4727-8c75-0525a5b65a09 r/w without journal. Quota mode: none.
[  175.304162][ T8483] ext4 filesystem being mounted at /377/mnt supports timestamps until 2038-01-19 (0x7fffffff)
[  175.343175][ T8127] EXT4-fs (loop4): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  175.514986][ T8487] loop4: detected capacity change from 0 to 4096
[  175.518483][ T8487] ntfs3(loop4): Different NTFS sector size (2048) and media sector size (512).
[  175.807634][ T8487] ntfs3(loop4): $UpCase is corrupted.
[  175.965093][ T8499] loop4: detected capacity change from 0 to 1024
[  175.989287][ T8499] hfsplus: bad catalog entry type
[  176.007801][   T90] hfsplus: b-tree write err: -5, ino 4
[  176.190227][ T5930] EXT4-fs (loop2): unmounting filesystem 76b65be2-f6da-4727-8c75-0525a5b65a09.
[  177.029580][ T8525] overlayfs: overlapping lowerdir path
[  177.149708][ T8528] loop3: detected capacity change from 0 to 128
[  177.873450][ T8540] netlink: 'syz.4.1021': attribute type 21 has an invalid length.
[  177.873467][ T8540] IPv6: NLM_F_CREATE should be specified when creating new route
[  178.413431][ T8547] loop3: detected capacity change from 0 to 40427
[  178.417559][ T8547] F2FS-fs (loop3): Invalid log_blocksize (268), supports only 12
[  178.420190][ T8547] F2FS-fs (loop3): Can't find valid F2FS filesystem in 1th superblock
[  178.425066][ T8547] F2FS-fs (loop3): invalid crc value
[  178.469371][ T8547] F2FS-fs (loop3): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
[  178.474809][ T8547] F2FS-fs (loop3): Try to recover 1th superblock, ret: 0
[  178.477585][ T8547] F2FS-fs (loop3): Mounted with checkpoint version = 48b305e5
[  178.696733][ T8567] netlink: 'syz.4.1033': attribute type 10 has an invalid length.
[  178.704516][ T8567] netlink: 40 bytes leftover after parsing attributes in process `syz.4.1033'.
[  178.709924][ T8567] dummy0: entered promiscuous mode
[  178.714798][ T8567] bridge0: port 3(dummy0) entered blocking state
[  178.718113][ T8567] bridge0: port 3(dummy0) entered disabled state
[  178.720846][ T8567] dummy0: entered allmulticast mode
[  178.725393][ T8567] bridge0: port 3(dummy0) entered blocking state
[  178.728380][ T8567] bridge0: port 3(dummy0) entered forwarding state
[  178.775772][ T8572] netlink: 24 bytes leftover after parsing attributes in process `syz.4.1034'.
[  178.793904][ T5934] Bluetooth: hci0: unexpected event 0x03 length: 1 < 11
[  178.949465][ T8583] netlink: 'syz.4.1039': attribute type 4 has an invalid length.
[  179.276181][   T24] usb 3-1: new high-speed USB device number 14 using dummy_hcd
[  179.433182][   T24] usb 3-1: New USB device found, idVendor=1de1, idProduct=c102, bcdDevice=7d.08
[  179.439712][   T24] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  179.443155][   T24] usb 3-1: Product: syz
[  179.445330][   T24] usb 3-1: Manufacturer: syz
[  179.447740][   T24] usb 3-1: SerialNumber: syz
[  179.468156][   T24] usb 3-1: config 0 descriptor??
[  179.492512][   T24] gm12u320 3-1:0.0: [drm:gm12u320_set_ecomode] *ERROR* Misc. req. error -22
[  179.498927][   T24] gm12u320 3-1:0.0: probe with driver gm12u320 failed with error -5
[  179.511297][   T24] usb-storage 3-1:0.0: USB Mass Storage device detected
[  179.521492][   T24] usb-storage 3-1:0.0: device ignored
[  179.716087][ T5974] usb 3-1: USB disconnect, device number 14
[  180.308998][ T8617] loop2: detected capacity change from 0 to 512
[  180.369233][ T8617] EXT4-fs (loop2): mounted filesystem 00000000-0000-0000-0000-000000d40000 r/w without journal. Quota mode: writeback.
[  180.374133][ T8617] ext4 filesystem being mounted at /387/file0 supports timestamps until 2038-01-19 (0x7fffffff)
[  180.400045][ T5930] EXT4-fs (loop2): unmounting filesystem 00000000-0000-0000-0000-000000d40000.
[  180.892510][ T8632] loop3: detected capacity change from 0 to 1024
[  180.982051][ T8636] loop2: detected capacity change from 0 to 4096
[  180.990099][ T8636] ntfs3(loop2): Different NTFS sector size (4096) and media sector size (512).
[  181.005486][ T8636] ntfs3(loop2): Mark volume as dirty due to NTFS errors
[  181.011284][ T8636] ntfs3(loop2): Failed to load $Secure (-22).
[  181.013187][ T8636] ntfs3(loop2): Failed to initialize $Secure (-22).
[  181.060896][ T8638] loop3: detected capacity change from 0 to 4096
[  181.063722][ T8638] ntfs3(loop3): Different NTFS sector size (4096) and media sector size (512).
[  181.074555][ T8638] ntfs3(loop3): Mark volume as dirty due to NTFS errors
[  181.077992][ T8638] ntfs3(loop3): mft corrupted
[  181.079536][ T8638] ntfs3(loop3): Failed to load $Extend (-22).
[  181.081632][ T8638] ntfs3(loop3): Failed to initialize $Extend.
[  181.092190][ T8638] ntfs3(loop3): ino=1e, mi_enum_attr
[  181.093948][ T8638] ntfs3(loop3): ino=1e, mi_enum_attr
[  181.095788][ T8638] ntfs3(loop3): ino=1e, "file1" mi_enum_attr
[  181.099333][ T8638] ntfs3(loop3): ino=1e, "file1" mi_enum_attr
[  181.102939][ T8638] ntfs3(loop3): ino=1e, "file1" mi_enum_attr
[  181.186303][ T5934] Bluetooth: hci2: unexpected event for opcode 0x0c22
[  181.232413][   T33] audit: type=1326 audit(1759223538.016:69): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8648 comm="syz.3.1069" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  181.252313][   T33] audit: type=1326 audit(1759223538.016:70): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8648 comm="syz.3.1069" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  181.272510][   T33] audit: type=1326 audit(1759223538.026:71): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8648 comm="syz.3.1069" exe="/syz-executor" sig=0 arch=c000003e syscall=312 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  181.292720][   T33] audit: type=1326 audit(1759223538.026:72): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8648 comm="syz.3.1069" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  181.302107][ T8654] loop2: detected capacity change from 0 to 128
[  181.305543][   T33] audit: type=1326 audit(1759223538.026:73): auid=4294967295 uid=0 gid=0 ses=4294967295 subj=unconfined pid=8648 comm="syz.3.1069" exe="/syz-executor" sig=0 arch=c000003e syscall=202 compat=0 ip=0x7f62bb58ec29 code=0x7ffc0000
[  181.322780][ T8654] EXT4-fs (loop2): mounted filesystem 76b65be2-f6da-4727-8c75-0525a5b65a09 r/w without journal. Quota mode: writeback.
[  181.339553][ T8654] ext4 filesystem being mounted at /396/file1 supports timestamps until 2038-01-19 (0x7fffffff)
[  181.354629][   T33] audit: type=1800 audit(1759223538.136:74): pid=8654 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed(directio) comm="syz.2.1072" name="file1" dev="loop2" ino=12 res=0 errno=0
[  181.363482][ T8661] netlink: 60 bytes leftover after parsing attributes in process `syz.3.1074'.
[  181.371503][ T8661] IPVS: Unknown mcast interface: 
[  181.408428][ T5930] EXT4-fs (loop2): unmounting filesystem 76b65be2-f6da-4727-8c75-0525a5b65a09.
[  181.826142][ T8676] loop2: detected capacity change from 0 to 512
[  181.828514][ T8676] EXT4-fs: Ignoring removed oldalloc option
[  181.840263][ T8676] EXT4-fs (loop2): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  181.844129][ T8676] ext4 filesystem being mounted at /400/bus supports timestamps until 2038-01-19 (0x7fffffff)
[  181.876090][ T5930] EXT4-fs (loop2): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  182.050036][ T8686] loop2: detected capacity change from 0 to 1024
[  182.352105][ T8690] loop2: detected capacity change from 0 to 32768
[  182.378342][ T8690] ocfs2: Slot 0 on device (7,2) was already allocated to this node!
[  182.391921][ T8690] ocfs2: Mounting device (7,2) on (node local, slot 0) with ordered data mode.
[  182.398751][   T13] (kworker/u8:1,13,0):ocfs2_check_dir_entry:325 ERROR: bad entry in directory #72: rec_len % 4 != 0 - offset=312, inode=13845347915746889, rec_len=25793, name_len=214
[  182.410473][   T33] audit: type=1800 audit(1759223539.196:75): pid=8690 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed(directio) comm="syz.2.1085" name="file1" dev="loop2" ino=17058 res=0 errno=0
[  182.474884][ T8712] loop4: detected capacity change from 0 to 128
[  182.494233][ T5930] ocfs2: Unmounting device (7,2) on (node local)
[  182.494318][ T8712] EXT4-fs (loop4): mounted filesystem 76b65be2-f6da-4727-8c75-0525a5b65a09 r/w without journal. Quota mode: none.
[  182.515391][ T8712] ext4 filesystem being mounted at /65/file0aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa supports timestamps until 2038-01-19 (0x7fffffff)
[  182.574010][ T8127] EXT4-fs (loop4): unmounting filesystem 76b65be2-f6da-4727-8c75-0525a5b65a09.
[  182.639205][ T8721] loop2: detected capacity change from 0 to 136
[  182.644036][ T8721] Attempt to read inode for relocated directory
[  182.866032][   T10] usb 5-1: new full-speed USB device number 3 using dummy_hcd
[  182.898345][ T8743] syz.3.1105 (8743) used greatest stack depth: 17848 bytes left
[  182.962712][ T8749] loop2: detected capacity change from 0 to 128
[  183.018415][   T10] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 10
[  183.022779][   T10] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x81 has invalid wMaxPacketSize 0
[  183.031798][   T10] usb 5-1: New USB device found, idVendor=1e7d, idProduct=319c, bcdDevice= 0.00
[  183.035293][   T10] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  183.047775][   T10] usb 5-1: config 0 descriptor??
[  183.336004][ T5989] usb 4-1: new high-speed USB device number 18 using dummy_hcd
[  183.467537][   T10] isku 0003:1E7D:319C.000A: hidraw0: USB HID v0.00 Device [HID 1e7d:319c] on usb-dummy_hcd.4-1/input0
[  183.498092][ T5989] usb 4-1: New USB device found, idVendor=0bed, idProduct=1100, bcdDevice=ec.c3
[  183.501792][ T5989] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  183.507484][ T5989] usb 4-1: config 0 descriptor??
[  183.511556][ T5989] cp210x 4-1:0.0: cp210x converter detected
[  183.868971][   T10] usb 5-1: USB disconnect, device number 3
[  183.914400][ T5989] cp210x 4-1:0.0: failed to get vendor val 0x000e size 3: -32
[  184.122173][ T5989] usb 4-1: cp210x converter now attached to ttyUSB0
[  184.325198][   T10] usb 4-1: USB disconnect, device number 18
[  184.330828][   T10] cp210x ttyUSB0: cp210x converter now disconnected from ttyUSB0
[  184.336374][   T10] cp210x 4-1:0.0: device disconnected
[  184.685990][ T5989] usb 5-1: new high-speed USB device number 4 using dummy_hcd
[  184.836213][ T5989] usb 5-1: Using ep0 maxpacket: 16
[  184.846053][ T5989] usb 5-1: config 0 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[  184.850480][ T5989] usb 5-1: config 0 interface 0 altsetting 0 has 1 endpoint descriptor, different from the interface descriptor's value: 9
[  184.855272][ T5989] usb 5-1: New USB device found, idVendor=045e, idProduct=07da, bcdDevice= 0.00
[  184.859295][ T5989] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  184.863850][ T5989] usb 5-1: config 0 descriptor??
[  185.187620][ T8775] loop3: detected capacity change from 0 to 32768
[  185.191433][ T8775] BTRFS: device fsid 395ef67a-297e-477c-816d-cd80a5b93e5d devid 1 transid 8 /dev/loop3 (7:3) scanned by syz.3.1121 (8775)
[  185.199924][ T8775] BTRFS info (device loop3): first mount of filesystem 395ef67a-297e-477c-816d-cd80a5b93e5d
[  185.203859][ T8775] BTRFS info (device loop3): using sha256 (sha256-lib) checksum algorithm
[  185.240744][ T8775] BTRFS info (device loop3): enabling ssd optimizations
[  185.243457][ T8775] BTRFS info (device loop3): enabling free space tree
[  185.276322][ T5989] HID 045e:07da: Invalid code 65791 type 1
[  185.278842][ T5989] HID 045e:07da: Invalid code 768 type 1
[  185.280815][ T5989] HID 045e:07da: Invalid code 769 type 1
[  185.282742][ T5989] HID 045e:07da: Invalid code 770 type 1
[  185.284661][ T5989] HID 045e:07da: Invalid code 771 type 1
[  185.287862][ T5989] HID 045e:07da: Invalid code 772 type 1
[  185.288689][ T6378] BTRFS info (device loop3): last unmount of filesystem 395ef67a-297e-477c-816d-cd80a5b93e5d
[  185.289921][ T5989] HID 045e:07da: Invalid code 773 type 1
[  185.295692][ T5989] HID 045e:07da: Invalid code 774 type 1
[  185.298064][ T5989] HID 045e:07da: Invalid code 775 type 1
[  185.299912][ T5989] HID 045e:07da: Invalid code 776 type 1
[  185.313735][ T5989] input: HID 045e:07da as /devices/platform/dummy_hcd.4/usb5/5-1/5-1:0.0/0003:045E:07DA.000B/input/input11
[  185.401005][ T5989] microsoft 0003:045E:07DA.000B: input,hidraw0: USB HID v0.00 Device [HID 045e:07da] on usb-dummy_hcd.4-1/input0
[  185.745938][ T5922] usb 4-1: new high-speed USB device number 19 using dummy_hcd
[  185.898708][ T5922] usb 4-1: config 1 has an invalid interface number: 253 but max is 1
[  185.902034][ T5922] usb 4-1: config 1 has an invalid descriptor of length 0, skipping remainder of the config
[  185.906512][ T5922] usb 4-1: config 1 has 3 interfaces, different from the descriptor's value: 2
[  185.909861][ T5922] usb 4-1: config 1 has no interface number 2
[  185.912058][ T5922] usb 4-1: config 1 interface 0 altsetting 0 endpoint 0x81 has an invalid bInterval 0, changing to 7
[  185.915751][ T5922] usb 4-1: config 1 interface 1 altsetting 1 endpoint 0x82 has invalid wMaxPacketSize 0
[  185.918938][ T5922] usb 4-1: config 1 interface 1 altsetting 1 bulk endpoint 0x82 has invalid maxpacket 0
[  185.923052][ T5922] usb 4-1: config 1 interface 1 altsetting 1 has 1 endpoint descriptor, different from the interface descriptor's value: 2
[  185.928020][ T5922] usb 4-1: config 1 interface 1 has no altsetting 0
[  185.932618][ T5922] usb 4-1: New USB device found, idVendor=0525, idProduct=a4a1, bcdDevice= 0.40
[  185.936202][ T5922] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  185.938927][ T5922] usb 4-1: Product: syz
[  185.940400][ T5922] usb 4-1: Manufacturer: syz
[  185.941823][ T5922] usb 4-1: SerialNumber: syz
[  185.949920][ T5922] cdc_ncm 4-1:1.253: CDC Union missing and no IAD found
[  185.952222][ T5922] cdc_ncm 4-1:1.253: bind() failure
[  186.086194][ T5989] usb 5-1: USB disconnect, device number 4
[  186.364203][ T8796] loop2: detected capacity change from 0 to 40427
[  186.365519][   T10] usb 4-1: USB disconnect, device number 19
[  186.369570][ T8796] F2FS-fs (loop2): invalid crc value
[  186.413718][ T8796] F2FS-fs (loop2): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
[  186.417948][ T8796] F2FS-fs (loop2): Mounted with checkpoint version = 48b305e5
[  186.476557][ T5930] syz-executor: attempt to access beyond end of device
[  186.476557][ T5930] loop2: rw=2049, sector=45096, nr_sectors = 8 limit=40427
[  186.484754][ T5930] CPU: 0 UID: 0 PID: 5930 Comm: syz-executor Not tainted syzkaller #0 PREEMPT(full) 
[  186.484774][ T5930] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[  186.484782][ T5930] Call Trace:
[  186.484789][ T5930]  <TASK>
[  186.484795][ T5930]  dump_stack_lvl+0x189/0x250
[  186.484817][ T5930]  ? __pfx_dump_stack_lvl+0x10/0x10
[  186.484832][ T5930]  ? __pfx_queue_work_on+0x10/0x10
[  186.484843][ T5930]  ? _raw_spin_unlock_irqrestore+0xad/0x110
[  186.484858][ T5930]  ? __pfx__raw_spin_unlock_irqrestore+0x10/0x10
[  186.484883][ T5930]  f2fs_handle_critical_error+0x37c/0x540
[  186.484902][ T5930]  f2fs_write_end_io+0x886/0xb60
[  186.484932][ T5930]  __submit_merged_bio+0x27a/0x6a0
[  186.484951][ T5930]  __submit_merged_write_cond+0x255/0x530
[  186.484978][ T5930]  f2fs_write_data_pages+0x261d/0x3000
[  186.485022][ T5930]  ? __pfx_f2fs_write_data_pages+0x10/0x10
[  186.485109][ T5930]  ? __lock_acquire+0xab9/0xd20
[  186.485140][ T5930]  ? __pfx_f2fs_write_data_pages+0x10/0x10
[  186.485155][ T5930]  do_writepages+0x32e/0x550
[  186.485179][ T5930]  ? do_raw_spin_unlock+0x4d/0x240
[  186.485197][ T5930]  filemap_fdatawrite+0x199/0x240
[  186.485211][ T5930]  ? __pfx_filemap_fdatawrite+0x10/0x10
[  186.485265][ T5930]  ? do_raw_spin_unlock+0x4d/0x240
[  186.485283][ T5930]  f2fs_sync_dirty_inodes+0x31f/0x830
[  186.485312][ T5930]  f2fs_write_checkpoint+0x93e/0x2440
[  186.485327][ T5930]  ? __lock_acquire+0xab9/0xd20
[  186.485368][ T5930]  ? __pfx_f2fs_write_checkpoint+0x10/0x10
[  186.485442][ T5930]  kill_f2fs_super+0x2cc/0x6d0
[  186.485465][ T5930]  ? __pfx_kill_f2fs_super+0x10/0x10
[  186.485495][ T5930]  ? shrinker_free+0x2ce/0x3e0
[  186.485515][ T5930]  deactivate_locked_super+0xbc/0x130
[  186.485536][ T5930]  cleanup_mnt+0x425/0x4c0
[  186.485555][ T5930]  ? lockdep_hardirqs_on+0x9c/0x150
[  186.485573][ T5930]  task_work_run+0x1d4/0x260
[  186.485591][ T5930]  ? __pfx_task_work_run+0x10/0x10
[  186.485634][ T5930]  ? __x64_sys_umount+0x122/0x160
[  186.485650][ T5930]  ? exit_to_user_mode_loop+0x40/0x130
[  186.485667][ T5930]  exit_to_user_mode_loop+0xe9/0x130
[  186.485682][ T5930]  do_syscall_64+0x2bd/0xfa0
[  186.485697][ T5930]  ? lockdep_hardirqs_on+0x9c/0x150
[  186.485711][ T5930]  ? entry_SYSCALL_64_after_hwframe+0x77/0x7f
[  186.485723][ T5930]  ? exc_page_fault+0xab/0x100
[  186.485739][ T5930]  entry_SYSCALL_64_after_hwframe+0x77/0x7f
[  186.485751][ T5930] RIP: 0033:0x7f99f118ff57
[  186.485764][ T5930] Code: a8 ff ff ff f7 d8 64 89 01 48 83 c8 ff c3 0f 1f 44 00 00 31 f6 e9 09 00 00 00 66 0f 1f 84 00 00 00 00 00 b8 a6 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 c7 c2 a8 ff ff ff f7 d8 64 89 02 b8
[  186.485775][ T5930] RSP: 002b:00007ffff119f928 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[  186.485789][ T5930] RAX: 0000000000000000 RBX: 00007f99f1211c2d RCX: 00007f99f118ff57
[  186.485797][ T5930] RDX: 0000000000000000 RSI: 0000000000000009 RDI: 00007ffff119f9e0
[  186.485805][ T5930] RBP: 00007ffff119f9e0 R08: 0000000000000000 R09: 0000000000000000
[  186.485812][ T5930] R10: 00000000ffffffff R11: 0000000000000246 R12: 00007ffff11a0a70
[  186.485820][ T5930] R13: 00007f99f1211c2d R14: 000000000002d7ef R15: 00007ffff11a0ab0
[  186.485845][ T5930]  </TASK>
[  186.485851][ T5930] F2FS-fs (loop2): Stopped filesystem due to reason: 3
[  186.866055][ T5989] usb 5-1: new high-speed USB device number 5 using dummy_hcd
[  187.016341][ T5989] usb 5-1: Using ep0 maxpacket: 8
[  187.021841][ T5989] usb 5-1: config 0 has an invalid interface number: 186 but max is 0
[  187.025098][ T5989] usb 5-1: config 0 has an invalid descriptor of length 0, skipping remainder of the config
[  187.029402][ T5989] usb 5-1: config 0 has no interface number 0
[  187.032122][ T5989] usb 5-1: config 0 interface 186 altsetting 0 has an invalid descriptor for endpoint zero, skipping
[  187.036807][ T5989] usb 5-1: config 0 interface 186 altsetting 0 endpoint 0xC has invalid wMaxPacketSize 0
[  187.048790][ T5989] usb 5-1: New USB device found, idVendor=07c0, idProduct=1505, bcdDevice=b8.c5
[  187.052269][ T5989] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  187.055357][ T5989] usb 5-1: Product: syz
[  187.059734][ T5989] usb 5-1: Manufacturer: syz
[  187.061622][ T5989] usb 5-1: SerialNumber: syz
[  187.076504][ T5989] usb 5-1: config 0 descriptor??
[  187.082227][ T5989] iowarrior 5-1:0.186: no interrupt-in endpoint found
[  187.221196][ T8822] loop2: detected capacity change from 0 to 32768
[  187.223629][ T8822] btrfs: Deprecated parameter 'usebackuproot'
[  187.225609][ T8822] BTRFS warning: 'usebackuproot' is deprecated, use 'rescue=usebackuproot' instead
[  187.229729][ T8822] BTRFS: device fsid c9fe44da-de57-406a-8241-57ec7d4412cf devid 1 transid 8 /dev/loop2 (7:2) scanned by syz.2.1133 (8822)
[  187.235268][ T8822] BTRFS info (device loop2): first mount of filesystem c9fe44da-de57-406a-8241-57ec7d4412cf
[  187.238638][ T8822] BTRFS info (device loop2): using crc32c (crc32c-lib) checksum algorithm
[  187.259765][ T8822] BTRFS info (device loop2): rebuilding free space tree
[  187.269914][ T8822] BTRFS info (device loop2): turning on async discard
[  187.272335][ T8822] BTRFS info (device loop2): enabling free space tree
[  187.274343][ T8822] BTRFS info (device loop2): force clearing of disk cache
[  187.276741][ T8822] BTRFS info (device loop2): trying to use backup root at mount time
[  187.309248][ T5989] usb 5-1: USB disconnect, device number 5
[  187.310783][ T5930] BTRFS info (device loop2): last unmount of filesystem c9fe44da-de57-406a-8241-57ec7d4412cf
[  187.455805][ T8839] loop2: detected capacity change from 0 to 4096
[  187.471664][ T8840] NILFS (loop2): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
[  187.477087][ T8839] NILFS error (device loop2): nilfs_bmap_lookup_at_level: broken bmap (inode number=6)
[  187.487363][ T8839] NILFS (loop2): mounting fs with errors
[  187.496837][ T8839] NILFS error (device loop2): nilfs_bmap_lookup_contig: broken bmap (inode number=2)
[  187.850251][ T8844] netlink: 4280 bytes leftover after parsing attributes in process `syz.2.1135'.
[  187.854152][ T8844] netlink: 4280 bytes leftover after parsing attributes in process `syz.2.1135'.
[  188.094334][ T8849] loop3: detected capacity change from 0 to 1024
[  188.678270][ T8863] loop3: detected capacity change from 0 to 164
[  188.710144][ T8865] loop3: detected capacity change from 0 to 256
[  188.725153][ T8865] FAT-fs (loop3): Directory bread(block 64) failed
[  188.728840][ T8865] FAT-fs (loop3): Directory bread(block 65) failed
[  188.731233][ T8865] FAT-fs (loop3): Directory bread(block 66) failed
[  188.733565][ T8865] FAT-fs (loop3): Directory bread(block 67) failed
[  188.735621][ T8865] FAT-fs (loop3): Directory bread(block 68) failed
[  188.738044][ T8865] FAT-fs (loop3): Directory bread(block 69) failed
[  188.741039][ T8865] FAT-fs (loop3): Directory bread(block 70) failed
[  188.743637][ T8865] FAT-fs (loop3): Directory bread(block 71) failed
[  188.746649][ T8865] FAT-fs (loop3): Directory bread(block 72) failed
[  188.749626][ T8865] FAT-fs (loop3): Directory bread(block 73) failed
[  188.818859][ T8868] loop3: detected capacity change from 0 to 128
[  188.977092][ T8871] gfs2: not a GFS2 filesystem
[  189.359398][ T8875] loop4: detected capacity change from 0 to 256
[  189.379907][ T8875] FAT-fs (loop4): Directory bread(block 64) failed
[  189.382669][ T8875] FAT-fs (loop4): Directory bread(block 65) failed
[  189.383507][ T8877] loop3: detected capacity change from 0 to 47
[  189.385448][ T8875] FAT-fs (loop4): Directory bread(block 66) failed
[  189.390805][ T8875] FAT-fs (loop4): Directory bread(block 67) failed
[  189.393662][ T8875] FAT-fs (loop4): Directory bread(block 68) failed
[  189.396493][ T8875] FAT-fs (loop4): Directory bread(block 69) failed
[  189.399427][ T8875] FAT-fs (loop4): Directory bread(block 70) failed
[  189.402632][ T8875] FAT-fs (loop4): Directory bread(block 71) failed
[  189.405449][ T8875] FAT-fs (loop4): Directory bread(block 72) failed
[  189.408637][ T8875] FAT-fs (loop4): Directory bread(block 73) failed
[  189.483275][ T8879] netlink: 8 bytes leftover after parsing attributes in process `syz.3.1150'.
[  189.492071][ T8879] batman_adv: Cannot find parent device. Skipping batadv-on-batadv check for gretap1
[  189.567873][ T8883] overlayfs: upper fs does not support RENAME_WHITEOUT.
[  189.571052][ T8883] overlayfs: failed to set xattr on upper
[  189.573620][ T8883] overlayfs: ...falling back to index=off.
[  189.579413][ T8883] overlayfs: ...falling back to uuid=null.
[  189.796095][ T5989] usb 5-1: new high-speed USB device number 6 using dummy_hcd
[  189.805256][ T8891] loop3: detected capacity change from 0 to 40427
[  189.811180][ T8891] F2FS-fs (loop3): invalid crc value
[  189.844137][ T8891] F2FS-fs (loop3): f2fs_recover_fsync_data: recovery fsync data, check_only: 0
[  189.849412][ T8891] F2FS-fs (loop3): Start checkpoint disabled!
[  189.852578][ T8891] F2FS-fs (loop3): f2fs_disable_checkpoint() finish, err:0
[  189.855399][ T8891] F2FS-fs (loop3): Mounted with checkpoint version = 48b305e6
[  189.874483][   T33] audit: type=1800 audit(1759223546.656:76): pid=8891 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed(directio) comm="syz.3.1156" name="file1" dev="loop3" ino=10 res=0 errno=0
[  189.948009][ T5989] usb 5-1: config 0 has more interface descriptors, than it declares in bNumInterfaces, ignoring interface number: 0
[  189.952850][ T5989] usb 5-1: config 0 has more interface descriptors, than it declares in bNumInterfaces, ignoring interface number: 255
[  189.958208][ T5989] usb 5-1: config 0 has no interfaces?
[  189.960380][ T5989] usb 5-1: New USB device found, idVendor=1908, idProduct=1315, bcdDevice= 0.00
[  189.963743][ T5989] usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  189.969716][ T5989] usb 5-1: config 0 descriptor??
[  190.268662][ T8895] syz.3.1156: attempt to access beyond end of device
[  190.268662][ T8895] loop3: rw=2049, sector=45096, nr_sectors = 2568 limit=40427
[  190.283345][ T8896] syz.3.1156: attempt to access beyond end of device
[  190.283345][ T8896] loop3: rw=2049, sector=47664, nr_sectors = 8 limit=40427
[  190.292914][ T8896] syz.3.1156: attempt to access beyond end of device
[  190.292914][ T8896] loop3: rw=2049, sector=47672, nr_sectors = 8 limit=40427
[  190.300133][ T8896] syz.3.1156: attempt to access beyond end of device
[  190.300133][ T8896] loop3: rw=2049, sector=47680, nr_sectors = 8 limit=40427
[  190.307230][ T8896] syz.3.1156: attempt to access beyond end of device
[  190.307230][ T8896] loop3: rw=2049, sector=47688, nr_sectors = 8 limit=40427
[  190.314709][ T8896] syz.3.1156: attempt to access beyond end of device
[  190.314709][ T8896] loop3: rw=2049, sector=47696, nr_sectors = 8 limit=40427
[  190.321792][ T8896] syz.3.1156: attempt to access beyond end of device
[  190.321792][ T8896] loop3: rw=2049, sector=47704, nr_sectors = 8 limit=40427
[  190.328844][ T8896] syz.3.1156: attempt to access beyond end of device
[  190.328844][ T8896] loop3: rw=2049, sector=47712, nr_sectors = 8 limit=40427
[  190.333568][ T8896] syz.3.1156: attempt to access beyond end of device
[  190.333568][ T8896] loop3: rw=2049, sector=47720, nr_sectors = 8 limit=40427
[  190.372473][   T10] usb 5-1: USB disconnect, device number 6
[  190.390623][   T33] audit: type=1800 audit(1759223546.906:77): pid=8895 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed(directio) comm="syz.3.1156" name="file1" dev="loop3" ino=10 res=0 errno=0
[  190.581002][ T1206] CPU: 0 UID: 0 PID: 1206 Comm: kworker/u9:4 Not tainted syzkaller #0 PREEMPT(full) 
[  190.581027][ T1206] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.2-debian-1.16.2-1 04/01/2014
[  190.581037][ T1206] Workqueue: writeback wb_workfn (flush-7:3)
[  190.581064][ T1206] Call Trace:
[  190.581071][ T1206]  <TASK>
[  190.581079][ T1206]  dump_stack_lvl+0x189/0x250
[  190.581098][ T1206]  ? __pfx_dump_stack_lvl+0x10/0x10
[  190.581110][ T1206]  ? __pfx_queue_work_on+0x10/0x10
[  190.581120][ T1206]  ? _raw_spin_unlock_irqrestore+0xad/0x110
[  190.581137][ T1206]  ? __pfx__raw_spin_unlock_irqrestore+0x10/0x10
[  190.581158][ T1206]  f2fs_handle_critical_error+0x37c/0x540
[  190.581180][ T1206]  f2fs_write_end_io+0x886/0xb60
[  190.581211][ T1206]  __submit_merged_bio+0x27a/0x6a0
[  190.581266][ T1206]  __submit_merged_write_cond+0x255/0x530
[  190.581294][ T1206]  f2fs_write_data_pages+0x261d/0x3000
[  190.581337][ T1206]  ? __pfx_f2fs_write_data_pages+0x10/0x10
[  190.581364][ T1206]  ? __pfx_f2fs_available_free_memory+0x10/0x10
[  190.581412][ T1206]  ? __pfx_f2fs_balance_fs_bg+0x10/0x10
[  190.581437][ T1206]  ? trace_f2fs_writepages+0x7f/0x200
[  190.581453][ T1206]  ? f2fs_write_node_pages+0x478/0x6e0
[  190.581478][ T1206]  ? __pfx_f2fs_write_node_pages+0x10/0x10
[  190.581502][ T1206]  ? __lock_acquire+0xab9/0xd20
[  190.581527][ T1206]  ? __pfx_f2fs_write_data_pages+0x10/0x10
[  190.581544][ T1206]  do_writepages+0x32e/0x550
[  190.581562][ T1206]  ? reacquire_held_locks+0x127/0x1d0
[  190.581575][ T1206]  ? writeback_sb_inodes+0x384/0x1010
[  190.581599][ T1206]  __writeback_single_inode+0x145/0xff0
[  190.581614][ T1206]  ? do_raw_spin_unlock+0x4d/0x240
[  190.581635][ T1206]  writeback_sb_inodes+0x6c7/0x1010
[  190.581674][ T1206]  ? __pfx_writeback_sb_inodes+0x10/0x10
[  190.581727][ T1206]  ? rcu_is_watching+0x15/0xb0
[  190.581749][ T1206]  wb_writeback+0x43b/0xaf0
[  190.581772][ T1206]  ? queue_io+0x301/0x590
[  190.581790][ T1206]  ? __pfx_wb_writeback+0x10/0x10
[  190.581813][ T1206]  ? _raw_spin_unlock_irq+0x23/0x50
[  190.581832][ T1206]  wb_workfn+0x409/0xef0
[  190.581865][ T1206]  ? __pfx_wb_workfn+0x10/0x10
[  190.581889][ T1206]  ? __lock_acquire+0xab9/0xd20
[  190.581917][ T1206]  ? process_scheduled_works+0x9ef/0x17b0
[  190.581942][ T1206]  ? _raw_spin_unlock_irq+0x23/0x50
[  190.581956][ T1206]  ? process_scheduled_works+0x9ef/0x17b0
[  190.581974][ T1206]  ? process_scheduled_works+0x9ef/0x17b0
[  190.581993][ T1206]  process_scheduled_works+0xae1/0x17b0
[  190.582038][ T1206]  ? __pfx_process_scheduled_works+0x10/0x10
[  190.582073][ T1206]  worker_thread+0x8a0/0xda0
[  190.582095][ T1206]  ? __pfx__raw_spin_unlock_irqrestore+0x10/0x10
[  190.582117][ T1206]  ? __kthread_parkme+0x7b/0x200
[  190.582138][ T1206]  kthread+0x711/0x8a0
[  190.582156][ T1206]  ? __pfx_worker_thread+0x10/0x10
[  190.582174][ T1206]  ? __pfx_kthread+0x10/0x10
[  190.582191][ T1206]  ? _raw_spin_unlock_irq+0x23/0x50
[  190.582206][ T1206]  ? lockdep_hardirqs_on+0x9c/0x150
[  190.582250][ T1206]  ? __pfx_kthread+0x10/0x10
[  190.582266][ T1206]  ret_from_fork+0x4bc/0x870
[  190.582288][ T1206]  ? __pfx_ret_from_fork+0x10/0x10
[  190.582313][ T1206]  ? __switch_to_asm+0x39/0x70
[  190.582329][ T1206]  ? __switch_to_asm+0x33/0x70
[  190.582342][ T1206]  ? __pfx_kthread+0x10/0x10
[  190.582358][ T1206]  ret_from_fork_asm+0x1a/0x30
[  190.582389][ T1206]  </TASK>
[  190.582397][ T1206] F2FS-fs (loop3): Stopped filesystem due to reason: 3
[  191.006673][ T8906] TCP: request_sock_TCP: Possible SYN flooding on port [::]:20002. Sending cookies.
[  191.787171][ T8916] loop4: detected capacity change from 0 to 32768
[  191.818457][   T33] audit: type=1800 audit(1759223548.606:78): pid=8916 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed(directio) comm="syz.4.1166" name="file1" dev="loop4" ino=4 res=0 errno=0
[  191.843495][ T8916] ERROR: (device loop4): dbAllocBits: leaf page corrupt
[  191.843495][ T8916] 
[  191.850188][ T8916] ERROR: (device loop4): remounting filesystem as read-only
[  191.854634][ T8916] bio_check_eod: 1 callbacks suppressed
[  191.854648][ T8916] syz.4.1166: attempt to access beyond end of device
[  191.854648][ T8916] loop4: rw=34817, sector=4680704, nr_sectors = 792 limit=32768
[  191.870991][  T117] blkno = 8ed80, nblocks = 63
[  191.872920][  T117] ERROR: (device loop4): dbFree: block to be freed is outside the map
[  191.872920][  T117] 
[  192.187235][ T8931] loop3: detected capacity change from 0 to 256
[  193.971220][ T1362] ieee802154 phy0 wpan0: encryption failed: -22
[  193.983642][ T1362] ieee802154 phy1 wpan1: encryption failed: -22
[  194.263336][ T8960] loop2: detected capacity change from 0 to 2048
[  194.268135][ T8960] NILFS (loop2): broken superblock, retrying with spare superblock (blocksize = 1024)
[  194.285602][ T8962] NILFS (loop2): segctord starting. Construction interval = 5 seconds, CP frequency < 30 seconds
[  194.371527][ T8950] infiniband !yz!: set active
[  194.373817][ T8950] infiniband !yz!: added team_slave_0
[  194.443560][ T8950] RDS/IB: !yz!: added
[  194.666035][   T10] usb 3-1: new high-speed USB device number 15 using dummy_hcd
[  194.816071][   T10] usb 3-1: Using ep0 maxpacket: 16
[  194.819476][   T10] usb 3-1: config 0 has an invalid interface number: 8 but max is 0
[  194.822285][   T10] usb 3-1: config 0 has no interface number 0
[  194.824193][   T10] usb 3-1: config 0 interface 8 altsetting 0 endpoint 0x8F has an invalid bInterval 0, changing to 7
[  194.828815][   T10] usb 3-1: config 0 interface 8 altsetting 0 endpoint 0x8F has invalid wMaxPacketSize 0
[  194.833654][   T10] usb 3-1: New USB device found, idVendor=0d8c, idProduct=000e, bcdDevice=8e.8f
[  194.836759][   T10] usb 3-1: New USB device strings: Mfr=0, Product=24, SerialNumber=3
[  194.839262][   T10] usb 3-1: Product: syz
[  194.840561][   T10] usb 3-1: SerialNumber: syz
[  194.846715][   T10] usb 3-1: config 0 descriptor??
[  194.850319][   T10] cm109 3-1:0.8: invalid payload size 0, expected 4
[  194.853950][   T10] input: CM109 USB driver as /devices/platform/dummy_hcd.2/usb3/3-1/3-1:0.8/input/input12
[  195.078333][    C0] cm109 3-1:0.8: cm109_urb_ctl_callback: urb status -71
[  195.082261][    C0] cm109 3-1:0.8: cm109_urb_ctl_callback: urb status -71
[  195.084599][    C0] cm109 3-1:0.8: cm109_urb_ctl_callback: urb status -71
[  195.086948][    C0] cm109 3-1:0.8: cm109_urb_ctl_callback: urb status -71
[  195.089452][    C0] cm109 3-1:0.8: cm109_urb_ctl_callback: urb status -71
[  195.092198][    C0] cm109 3-1:0.8: cm109_urb_ctl_callback: urb status -71
[  195.094678][    C0] cm109 3-1:0.8: cm109_urb_ctl_callback: urb status -71
[  195.098047][    C0] cm109 3-1:0.8: cm109_urb_ctl_callback: urb status -71
[  195.100427][   T10] usb 3-1: USB disconnect, device number 15
[  195.103120][    C0] cm109 3-1:0.8: cm109_urb_ctl_callback: urb status -71
[  195.105262][    C0] cm109 3-1:0.8: cm109_submit_buzz_toggle: usb_submit_urb (urb_ctl) failed -19
[  195.110139][   T10] cm109 3-1:0.8: cm109_toggle_buzzer_sync: usb_control_msg() failed -19
[  195.277819][ T8980] loop3: detected capacity change from 0 to 2048
[  195.284400][ T8980] UDF-fs: INFO Mounting volume 'LinuxUDF', timestamp 2022/11/22 14:59 (1000)
[  195.386640][ T5922] usb 5-1: new high-speed USB device number 7 using dummy_hcd
[  195.515203][ T8984] loop3: detected capacity change from 0 to 32768
[  195.522322][ T8984] JBD2: Ignoring recovery information on journal
[  195.544893][ T8984] ocfs2: Mounting device (7,3) on (node local, slot 0) with ordered data mode.
[  195.556098][ T5922] usb 5-1: Using ep0 maxpacket: 8
[  195.562271][ T5922] usb 5-1: New USB device found, idVendor=2770, idProduct=9120, bcdDevice=6c.77
[  195.565687][ T5922] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  195.571322][ T5922] usb 5-1: Product: syz
[  195.572986][ T5922] usb 5-1: Manufacturer: syz
[  195.574806][ T5922] usb 5-1: SerialNumber: syz
[  195.585685][ T5922] usb 5-1: config 0 descriptor??
[  195.592071][ T5922] gspca_main: sq905-2.14.0 probing 2770:9120
[  195.593352][ T6378] ocfs2: Unmounting device (7,3) on (node local)
[  195.674373][ T8988] loop2: detected capacity change from 0 to 4096
[  195.680600][ T8988] ntfs3(loop2): Different NTFS sector size (2048) and media sector size (512).
[  195.690732][ T8988] ntfs3(loop2): $AttrDef is corrupted.
[  195.939039][ T5922] gspca_sq905: sq905_command: usb_control_msg failed (-71)
[  195.941596][ T5922] sq905 5-1:0.0: probe with driver sq905 failed with error -71
[  195.945535][ T5922] usb 5-1: USB disconnect, device number 7
[  196.173079][ T5934] Bluetooth: hci2: command 0x0405 tx timeout
[  196.203884][ T8997] Zero length message leads to an empty skb
[  196.353057][ T8997] loop3: detected capacity change from 0 to 32768
[  196.750753][ T9007] loop2: detected capacity change from 0 to 256
[  196.768955][ T9007] FAT-fs (loop2): Directory bread(block 64) failed
[  196.771570][ T9007] FAT-fs (loop2): Directory bread(block 65) failed
[  196.774232][ T9007] FAT-fs (loop2): Directory bread(block 66) failed
[  196.777491][ T9007] FAT-fs (loop2): Directory bread(block 67) failed
[  196.782068][ T9007] FAT-fs (loop2): Directory bread(block 68) failed
[  196.784121][ T9009] 8021q: adding VLAN 0 to HW filter on device ipvlan2
[  196.784581][ T9007] FAT-fs (loop2): Directory bread(block 69) failed
[  196.792218][ T9007] FAT-fs (loop2): Directory bread(block 70) failed
[  196.794360][ T9007] FAT-fs (loop2): Directory bread(block 71) failed
[  196.796961][ T9007] FAT-fs (loop2): Directory bread(block 72) failed
[  196.800326][ T9007] FAT-fs (loop2): Directory bread(block 73) failed
[  196.944577][ T9014] loop2: detected capacity change from 0 to 4096
[  196.948408][ T9014] ntfs3(loop2): Different NTFS sector size (4096) and media sector size (512).
[  196.963823][ T9014] ntfs3(loop2): Mark volume as dirty due to NTFS errors
[  196.968197][ T9014] ntfs3(loop2): ino=19, mi_enum_attr
[  196.982314][ T9014] ntfs3(loop2): failed to convert "c46c" to cp863
[  196.988438][ T9014] ntfs3(loop2): ino=20, mi_enum_attr
[  197.102224][   T33] audit: type=1800 audit(1759223553.886:79): pid=9024 uid=0 auid=4294967295 ses=4294967295 subj=unconfined op=collect_data cause=failed comm="syz.4.1209" name="SYSV00000000" dev="hugetlbfs" ino=0 res=0 errno=0
[  197.349994][ T9036] netlink: 16 bytes leftover after parsing attributes in process `syz.3.1213'.
[  198.183073][ T9044] loop3: detected capacity change from 0 to 32768
[  198.230431][ T9044] ocfs2: Mounting device (7,3) on (node local, slot 0) with writeback data mode.
[  198.335193][ T9037] syz.2.1212 (9037): drop_caches: 2
[  198.398334][ T6378] ocfs2: Unmounting device (7,3) on (node local)
[  198.848839][ T5988] usb 4-1: new high-speed USB device number 20 using dummy_hcd
[  198.996059][ T5988] usb 4-1: Using ep0 maxpacket: 8
[  199.001641][ T5988] usb 4-1: config 6 has an invalid interface number: 2 but max is 0
[  199.004768][ T5988] usb 4-1: config 6 has no interface number 0
[  199.008676][ T5988] usb 4-1: config 6 interface 2 altsetting 0 endpoint 0xB has invalid wMaxPacketSize 0
[  199.012472][ T5988] usb 4-1: config 6 interface 2 altsetting 0 endpoint 0x4 has invalid wMaxPacketSize 0
[  199.019225][ T5988] usb 4-1: New USB device found, idVendor=0af0, idProduct=7271, bcdDevice=88.91
[  199.022787][ T5988] usb 4-1: New USB device strings: Mfr=17, Product=2, SerialNumber=3
[  199.025975][ T5988] usb 4-1: Product: syz
[  199.027723][ T5988] usb 4-1: Manufacturer: syz
[  199.029634][ T5988] usb 4-1: SerialNumber: syz
[  199.037401][ T5988] hso 4-1:6.2: Failed to find INT IN ep
[  199.177274][ T9078] loop2: detected capacity change from 0 to 32768
[  199.183120][ T9078] XFS (loop2): Mounting V5 Filesystem d7dc424e-7990-42cb-9f91-9cb7200a101d
[  199.192652][ T9078] XFS (loop2): Ending clean mount
[  199.220027][ T5930] XFS (loop2): Unmounting Filesystem d7dc424e-7990-42cb-9f91-9cb7200a101d
[  199.248959][ T5988] usb 4-1: USB disconnect, device number 20
[  199.338778][ T9088] IPv6: sit1: Disabled Multicast RS
[  199.680797][ T9106] loop2: detected capacity change from 0 to 256
[  199.981112][ T9113] program syz.3.1241 is using a deprecated SCSI ioctl, please convert it to SG_IO
[  199.981146][ T9111] loop2: detected capacity change from 0 to 128
[  199.987992][ T9111] FAT-fs (loop2): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
[  199.992892][ T9111] FAT-fs (loop2): Invalid FSINFO signature: 0x41615252, 0x80417272 (sector = 1)
[  200.059783][ T9118] loop3: detected capacity change from 0 to 512
[  200.098953][ T9118] EXT4-fs error (device loop3): ext4_validate_block_bitmap:441: comm syz.3.1243: bg 0: block 248: padding at end of block bitmap is not set
[  200.106629][ T9118] Quota error (device loop3): write_blk: dquota write failed
[  200.109488][ T9118] Quota error (device loop3): qtree_write_dquot: Error -117 occurred while creating quota
[  200.113173][ T9118] EXT4-fs error (device loop3): ext4_acquire_dquot:6945: comm syz.3.1243: Failed to acquire dquot type 1
[  200.123527][ T9118] EXT4-fs (loop3): 1 truncate cleaned up
[  200.127289][ T9118] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  200.132024][ T9118] ext4 filesystem being mounted at /312/file0 supports timestamps until 2038-01-19 (0x7fffffff)
[  200.165174][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  200.499584][   T10] usb 3-1: new full-speed USB device number 16 using dummy_hcd
[  200.666575][   T10] usb 3-1: config 0 has an invalid interface number: 120 but max is 0
[  200.673225][   T10] usb 3-1: config 0 has no interface number 0
[  200.677506][   T10] usb 3-1: config 0 interface 120 altsetting 0 has an endpoint descriptor with address 0xFF, changing to 0x8F
[  200.682492][   T10] usb 3-1: config 0 interface 120 altsetting 0 endpoint 0x8F has an invalid bInterval 0, changing to 10
[  200.688821][   T10] usb 3-1: config 0 interface 120 altsetting 0 endpoint 0x8F has invalid wMaxPacketSize 0
[  200.692994][   T10] usb 3-1: New USB device found, idVendor=16e3, idProduct=f9e9, bcdDevice= 0.58
[  200.698080][   T10] usb 3-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[  200.708809][   T10] usb 3-1: config 0 descriptor??
[  200.728916][   T10] input: USB Touchscreen 16e3:f9e9 as /devices/platform/dummy_hcd.2/usb3/3-1/3-1:0.120/input/input13
[  200.786037][ T5989] usb 5-1: new high-speed USB device number 8 using dummy_hcd
[  200.936322][ T5989] usb 5-1: Using ep0 maxpacket: 32
[  200.941758][ T5989] usb 5-1: config 0 interface 0 has no altsetting 0
[  200.943802][   T10] usb 3-1: USB disconnect, device number 16
[  200.952103][ T5989] usb 5-1: New USB device found, idVendor=16d0, idProduct=10b8, bcdDevice=de.8e
[  200.955323][ T5989] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  200.958209][ T5989] usb 5-1: Product: syz
[  200.959669][ T5989] usb 5-1: Manufacturer: syz
[  200.961422][ T5989] usb 5-1: SerialNumber: syz
[  200.970983][ T5989] usb 5-1: config 0 descriptor??
[  200.978190][ T5989] gs_usb 5-1:0.0: Required endpoints not found
[  201.229817][   T10] usb 5-1: USB disconnect, device number 8
[  201.593719][ T9153] loop2: detected capacity change from 0 to 256
[  201.605689][ T9153] exFAT-fs (loop2): failed to load upcase table (idx : 0x00010000, chksum : 0x18acca35, utbl_chksum : 0xe619d30d)
[  201.628117][ T9155] loop3: detected capacity change from 0 to 256
[  201.634579][ T9155] exFAT-fs (loop3): failed to load upcase table (idx : 0x00010000, chksum : 0xbe675ead, utbl_chksum : 0xe619d30d)
[  201.672602][ T9157] loop2: detected capacity change from 0 to 512
[  201.692982][ T9157] EXT4-fs (loop2): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  201.697333][ T9157] ext4 filesystem being mounted at /474/bus supports timestamps until 2038-01-19 (0x7fffffff)
[  201.697779][ T9161] loop3: detected capacity change from 0 to 512
[  201.722017][ T9161] EXT4-fs (loop3): mounted filesystem 00000000-0000-0000-0000-000000000000 r/w without journal. Quota mode: writeback.
[  201.727562][ T9161] ext4 filesystem being mounted at /322/file0 supports timestamps until 2038-01-19 (0x7fffffff)
[  201.729865][ T5930] EXT4-fs (loop2): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  201.857360][ T6378] EXT4-fs (loop3): unmounting filesystem 00000000-0000-0000-0000-000000000000.
[  201.941631][ T9175] netlink: 8 bytes leftover after parsing attributes in process `syz.2.1267'.
[  201.945268][ T9175] netlink: 8 bytes leftover after parsing attributes in process `syz.2.1267'.
[  201.949306][ T9175] netlink: 8 bytes leftover after parsing attributes in process `syz.2.1267'.
[  201.953427][ T9175] netlink: 8 bytes leftover after parsing attributes in process `syz.2.1267'.
[  201.957640][ T9175] netlink: 8 bytes leftover after parsing attributes in process `syz.2.1267'.
[  201.961452][ T9175] netlink: 8 bytes leftover after parsing attributes in process `syz.2.1267'.
[  201.965151][ T9175] netlink: 8 bytes leftover after parsing attributes in process `syz.2.1267'.
[  201.973098][ T9175] netlink: 8 bytes leftover after parsing attributes in process `syz.2.1267'.
[  201.977328][ T9175] netlink: 8 bytes leftover after parsing attributes in process `syz.2.1267'.
[  201.986631][ T9175] A link change request failed with some changes committed already. Interface bridge_slave_0 may have been left with an inconsistent configuration, please check.
[  202.082807][ T9177] 8021q: adding VLAN 0 to HW filter on device team0
[  202.113357][ T9177] A link change request failed with some changes committed already. Interface caif0 may have been left with an inconsistent configuration, please check.
[  202.809279][   T13] netdevsim netdevsim2 netdevsim3 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  202.875177][   T13] netdevsim netdevsim2 netdevsim2 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  202.955775][   T13] netdevsim netdevsim2 netdevsim1 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  203.024804][   T13] netdevsim netdevsim2 netdevsim0 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  203.134674][   T13] bridge_slave_1: left allmulticast mode
[  203.136822][   T13] bridge_slave_1: left promiscuous mode
[  203.138991][   T13] bridge0: port 2(bridge_slave_1) entered disabled state
[  203.146593][   T13] bridge_slave_0: left allmulticast mode
[  203.148790][   T13] bridge_slave_0: left promiscuous mode
[  203.150920][   T13] bridge0: port 1(bridge_slave_0) entered disabled state
[  203.392191][   T13] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[  203.398536][   T13] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[  203.402970][   T13] bond0 (unregistering): Released all slaves
[  203.820582][   T13] hsr_slave_0: left promiscuous mode
[  203.828969][   T13] hsr_slave_1: left promiscuous mode
[  203.833289][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_0
[  203.835703][   T13] batman_adv: batadv0: Removing interface: batadv_slave_0
[  203.839245][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_1
[  203.841499][   T13] batman_adv: batadv0: Removing interface: batadv_slave_1
[  203.857969][   T13] veth1_macvtap: left promiscuous mode
[  203.860144][   T13] veth0_macvtap: left promiscuous mode
[  203.862505][   T13] veth1_vlan: left promiscuous mode
[  203.864552][   T13] veth0_vlan: left promiscuous mode
[  204.391739][   T13] team0 (unregistering): Port device team_slave_1 removed
[  204.438137][   T13] team0 (unregistering): Port device team_slave_0 removed
[  205.333059][   T13] netdevsim netdevsim3 netdevsim3 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  205.397640][   T13] netdevsim netdevsim3 netdevsim2 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  205.455140][   T13] netdevsim netdevsim3 netdevsim1 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  205.545046][   T13] netdevsim netdevsim3 netdevsim0 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  205.653418][   T13] netdevsim netdevsim4 netdevsim3 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  205.727386][   T13] netdevsim netdevsim4 netdevsim2 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  205.787139][   T13] netdevsim netdevsim4 netdevsim1 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  205.838716][   T13] netdevsim netdevsim4 netdevsim0 (unregistering): unset [1, 0] type 2 family 0 port 6081 - 0
[  205.946403][   T13] bridge_slave_1: left allmulticast mode
[  205.948679][   T13] bridge_slave_1: left promiscuous mode
[  205.951100][   T13] bridge0: port 2(bridge_slave_1) entered disabled state
[  205.956843][   T13] bridge_slave_0: left promiscuous mode
[  205.959249][   T13] bridge0: port 1(bridge_slave_0) entered disabled state
[  205.969045][   T13] dummy0: left allmulticast mode
[  205.971357][   T13] bridge0: port 3(dummy0) entered disabled state
[  205.975687][   T13] bridge_slave_1: left allmulticast mode
[  205.978040][   T13] bridge_slave_1: left promiscuous mode
[  205.980400][   T13] bridge0: port 2(bridge_slave_1) entered disabled state
[  205.987781][   T13] bridge_slave_0: left allmulticast mode
[  205.989882][   T13] bridge_slave_0: left promiscuous mode
[  205.991690][   T13] bridge0: port 1(bridge_slave_0) entered disabled state
[  206.462890][   T13] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[  206.467417][   T13] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[  206.471117][   T13] bond0 (unregistering): Released all slaves
[  206.714124][   T13] bond0 (unregistering): (slave bond_slave_0): Releasing backup interface
[  206.718717][   T13] bond0 (unregistering): (slave bond_slave_1): Releasing backup interface
[  206.723216][   T13] bond0 (unregistering): (slave wlan1): Releasing backup interface
[  206.732643][   T13] bond0 (unregistering): Released all slaves
[  207.357017][   T13] hsr_slave_0: left promiscuous mode
[  207.359849][   T13] hsr_slave_1: left promiscuous mode
[  207.362481][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_0
[  207.365255][   T13] batman_adv: batadv0: Removing interface: batadv_slave_0
[  207.369118][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_1
[  207.371960][   T13] batman_adv: batadv0: Removing interface: batadv_slave_1
[  207.385440][   T13] hsr_slave_0: left promiscuous mode
[  207.390885][   T13] hsr_slave_1: left promiscuous mode
[  207.393513][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_0
[  207.396816][   T13] batman_adv: batadv0: Removing interface: batadv_slave_0
[  207.400286][   T13] batman_adv: batadv0: Interface deactivated: batadv_slave_1
[  207.403258][   T13] batman_adv: batadv0: Removing interface: batadv_slave_1
[  207.434638][   T13] veth1_macvtap: left promiscuous mode
[  207.437273][   T13] veth0_macvtap: left promiscuous mode
[  207.439970][   T13] veth1_vlan: left promiscuous mode
[  207.442090][   T13] veth0_vlan: left promiscuous mode
[  207.447775][   T13] veth1_macvtap: left promiscuous mode
[  207.449961][   T13] veth0_macvtap: left promiscuous mode
[  207.452215][   T13] veth1_vlan: left promiscuous mode
[  207.454321][   T13] veth0_vlan: left promiscuous mode
[  207.918510][   T13] team0 (unregistering): Port device team_slave_1 removed
[  207.957921][   T13] team0 (unregistering): Port device team_slave_0 removed
[  208.637155][   T13] team0 (unregistering): Port device team_slave_1 removed
[  208.669448][   T13] team0 (unregistering): Port device team_slave_0 removed

VM DIAGNOSIS:
09:12:49  Registers:
info registers vcpu 0

CPU#0
RAX=e450d50f0106a000 RBX=ffffffff81972677 RCX=e450d50f0106a000 RDX=0000000000000001
RSI=ffffffff8db9fb03 RDI=ffffffff8c03da60 RBP=ffffffff8e007ea8 RSP=ffffffff8e007d80
R8 =ffff88804b032fdb R9 =1ffff110096065fb R10=dffffc0000000000 R11=ffffed10096065fc
R12=ffffffff8fc35770 R13=0000000000000000 R14=0000000000000000 R15=1ffffffff1c12a40
RIP=ffffffff8b7f9dd3 RFL=00000286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=1
ES =0000 0000000000000000 ffffffff 00c00000
CS =0010 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA]
SS =0018 0000000000000000 ffffffff 00c09300 DPL=0 DS   [-WA]
DS =0000 0000000000000000 ffffffff 00c00000
FS =0000 0000000000000000 ffffffff 00c00000
GS =0000 ffff8880b83fc000 ffffffff 00c00000
LDT=0000 0000000000000000 ffffffff 00c00000
TR =0040 fffffe0000003000 00004087 00008b00 DPL=0 TSS64-busy
GDT=     fffffe0000001000 0000007f
IDT=     fffffe0000000000 00000fff
CR0=80050033 CR2=00007f9aab9324a0 CR3=000000000e138000 CR4=000006f0
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000d01
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001fa0
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=00000000263de81a 0000000000000010 XMM01=7a79730000000000 00000000284bcd96
XMM02=0000000000000000 0000000000000000 XMM03=0000000000000000 0000000000000000
XMM04=ffffffffffffff00 0000000000000000 XMM05=0200000000000000 00000000000002ff
XMM06=0200000000000000 00000000000002ff XMM07=0000000000000000 0000000000000000
XMM08=0000000000000000 0000000000000000 XMM09=0000000000000000 0000000000000000
XMM10=0000000000000000 0000000000000000 XMM11=0000000000000000 0000000000000000
XMM12=0000000000000000 0000000000000000 XMM13=0000000000000000 0000000000000000
XMM14=0000000000000000 0000000000000000 XMM15=0000000000000000 0000000000000000
info registers vcpu 1

CPU#1
RAX=55727fdcff31f300 RBX=ffffffff81972677 RCX=55727fdcff31f300 RDX=0000000000000001
RSI=ffffffff8db9fb03 RDI=ffffffff8c03da60 RBP=ffffc90000177f10 RSP=ffffc90000177de0
R8 =ffff888136632fdb R9 =1ffff11026cc65fb R10=dffffc0000000000 R11=ffffed1026cc65fc
R12=ffffffff8fc35770 R13=0000000000000001 R14=0000000000000001 R15=1ffff110200d4000
RIP=ffffffff8b7f9dd3 RFL=00000286 [--S--P-] CPL=0 II=0 A20=1 SMM=0 HLT=1
ES =0000 0000000000000000 ffffffff 00c00000
CS =0010 0000000000000000 ffffffff 00a09b00 DPL=0 CS64 [-RA]
SS =0018 0000000000000000 ffffffff 00c09300 DPL=0 DS   [-WA]
DS =0000 0000000000000000 ffffffff 00c00000
FS =0000 0000000000000000 ffffffff 00c00000
GS =0000 ffff8881a39fc000 ffffffff 00c00000
LDT=0000 0000000000000000 ffffffff 00c00000
TR =0040 fffffe000004a000 00004087 00008b00 DPL=0 TSS64-busy
GDT=     fffffe0000048000 0000007f
IDT=     fffffe0000000000 00000fff
CR0=80050033 CR2=0000001b32a12ff8 CR3=000000000e138000 CR4=000006f0
DR0=0000000000000000 DR1=0000000000000000 DR2=0000000000000000 DR3=0000000000000000 
DR6=00000000ffff0ff0 DR7=0000000000000400
EFER=0000000000000d01
FCW=037f FSW=0000 [ST=0] FTW=00 MXCSR=00001f80
FPR0=0000000000000000 0000 FPR1=0000000000000000 0000
FPR2=0000000000000000 0000 FPR3=0000000000000000 0000
FPR4=0000000000000000 0000 FPR5=0000000000000000 0000
FPR6=0000000000000000 0000 FPR7=0000000000000000 0000
XMM00=0000000000000000 0000000000000000 XMM01=ffffffffffffffff 00000000ffffffff
XMM02=0000000000000000 0000000000ff0000 XMM03=0000000000000000 0000000000000000
XMM04=0000000000000000 00000000000000ff XMM05=0000000000000051 0000000000000000
XMM06=ff00000000000000 0000000000000000 XMM07=0000000000000000 0000000000000000
XMM08=ffffffffffffff00 ffffffffffffffff XMM09=00346e6170772f74 656e2f307968702f
XMM10=0000000000000000 0000000000000000 XMM11=0000000000000000 0000000000000000
XMM12=0000000000000000 0000000000000000 XMM13=0000000000000000 0000000000000000
XMM14=0000000000000000 0000000000000000 XMM15=0000000000000000 0000000000000000
