| Seq | Timestamp | Type | Name | Duration |
|---|---|---|---|---|
| 0/0 | 2026/09/17 17:19 | flow | patch-triage |
1mArgs:null Results: {
"EnableConfigs": null,
"FocusSymbols": [],
"KMSANReasoning": "",
"NeedsKMSAN": false,
"Reasoning": "The patch modifies error path handling in rt6190_out_enable() for the Richtek RT6190 buck-boost controller driver (drivers/regulator/rt6190-regulator.c). This driver requires specific physical I2C hardware that is not emulated in standard virtualized environments (QEMU/GCE), making the modified code structurally unreachable for fuzzing.",
"WorthFuzzing": false
} |
| 1/1 | 2026/09/17 17:19 | action | read-patch-diff |
0mArgs:null Results: {
"PatchDiff": "commit a31a7d2fdcfca135114de392812aaeeb9c18b205\nAuthor: syz-cluster \u003ctriage@syzkaller.com\u003e\nDate: Thu Sep 17 17:19:07 2026 +0000\n\n syz-cluster: applied patch under review\n\ndiff --git a/drivers/regulator/rt6190-regulator.c b/drivers/regulator/rt6190-regulator.c\nindex 3883440295edf..bf99e18f6d5b0 100644\n--- a/drivers/regulator/rt6190-regulator.c\n+++ b/drivers/regulator/rt6190-regulator.c\n@@ -109,19 +109,27 @@ static int rt6190_out_enable(struct regulator_dev *rdev)\n \tret = regmap_raw_read(regmap, RT6190_REG_OUTV, out_cfg,\n \t\t\t sizeof(out_cfg));\n \tif (ret)\n-\t\treturn ret;\n+\t\tgoto err_pm_put;\n \n \tret = regulator_enable_regmap(rdev);\n \tif (ret)\n-\t\treturn ret;\n+\t\tgoto err_pm_put;\n \n \tret = regmap_raw_write(regmap, RT6190_REG_OUTV, out_cfg,\n \t\t\t sizeof(out_cfg));\n \tif (ret)\n-\t\treturn ret;\n+\t\tgoto err_pm_put;\n+\n+\tret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK,\n+\t\t\t\t RT6190_ENGCP_MASK);\n+\tif (ret)\n+\t\tgoto err_pm_put;\n+\n+\treturn 0;\n \n-\treturn regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK,\n-\t\t\t\t RT6190_ENGCP_MASK);\n+err_pm_put:\n+\tpm_runtime_put(data-\u003edev);\n+\treturn ret;\n }\n \n static int rt6190_out_disable(struct regulator_dev *rdev)\n"
} |
| 2/1 | 2026/09/17 17:19 | agent | patch-evaluator |
1mModel:core Args: null Results: {
"EnableConfigs": null,
"FocusSymbols": [],
"Reasoning": "The patch modifies error path handling in rt6190_out_enable() for the Richtek RT6190 buck-boost controller driver (drivers/regulator/rt6190-regulator.c). This driver requires specific physical I2C hardware that is not emulated in standard virtualized environments (QEMU/GCE), making the modified code structurally unreachable for fuzzing.",
"WorthFuzzing": false
}Instruction: You are an expert Linux kernel maintainer and security engineer.
Your job is to review a provided patch series and evaluate whether it warrants fuzzing with syzkaller.
IMPORTANT: The changes have ALREADY been applied and committed as the HEAD commit in
your workspace. Do NOT rely on internal assumptions. You must actively use your code access
tools to inspect the actual source code, callers, and surrounding context.
================================================================================
1. CORE TRIAGE PHILOSOPHY
================================================================================
The goal of patch fuzzing is to discover crashes, regressions, exposed latent bugs,
and newly triggered assertions introduced by the patch series.
- REACHABILITY IS THE PRIMARY GATE:
Fuzzing can only discover bugs in code that can actually execute in standard virtualized
environments (GCE or QEMU, utilizing software-emulated devices like USB gadgets, netdev, tun/tap).
If the modified code is structurally unreachable (see Section 2), it MUST NOT be fuzzed,
regardless of whether it adds assertions or complex logic.
- DO NOT BLINDLY TRUST "NO FUNCTIONAL CHANGE" (NFCI) OR "REFACTORING" CLAIMS:
Patch authors routinely label changes as "cleanups", "refactorings", or state
"No functional change intended". Do NOT take these claims at face value.
Code refactorings that rearrange logic, introduce helper functions, or alter state management
in core subsystems frequently introduce subtle semantic shifts or uncover latent kernel bugs.
If reachable executable code is modified or refactored, it MUST be fuzzed.
- NEW OR MODIFIED ASSERTIONS IN REACHABLE CODE MUST BE FUZZED:
When a patch introduces or modifies runtime checks or assertions (e.g., WARN_ON*, VM_WARN_ON*,
BUG_ON*, lockdep_assert*) in reachable code paths, it enforces new or stricter invariants.
Even if the author believes the invariant always holds, fuzzing is essential to verify whether
an unusual sequence of operations can violate it.
================================================================================
2. WHEN TO RETURN WorthFuzzing=false (NEGATIVE CRITERIA)
================================================================================
Return WorthFuzzing=false ONLY IF all modified code falls strictly into one or more of these categories:
- Non-kernel and non-executable changes:
* Modifications to Documentation/, comments, or spelling fixes.
* User-space directories, self-tests, samples, or scripts (e.g., tools/, samples/, scripts/, usr/)
that do not affect the compiled kernel image (vmlinux) or kernel modules.
* Purely decorative logging (e.g., message strings in pr_err, printk, dev_info) or tracepoints
that do not alter control flow or data structures.
* Build system or Kconfig changes that do not alter compiled C logic.
- Structurally unreachable hardware:
* Vendor-specific PCIe switches, SmartNICs, or GPU drivers (e.g., mlxsw, pds_core, qed,
ionic, amdgpu) requiring physical ASIC/PCIe cards not emulated in standard QEMU.
- Unreachable execution paths:
* Driver teardown callbacks (.remove, .shutdown, pci_unregister_driver) executed only during
physical PCI hot-unplug or manual sysfs driver unbinding.
* Code paths exclusive to architectures other than the target architecture.
================================================================================
3. WHEN TO RETURN WorthFuzzing=true (POSITIVE CRITERIA)
================================================================================
Return WorthFuzzing=true whenever the patch touches reachable executable code, including:
- Core Subsystems:
* Any logic modifications in memory management (mm/), synchronization/locking (kernel/locking/),
BPF, scheduler, core networking, VFS, or syscall handling.
- Refactorings and Code Cleanups:
* Any restructuring of reachable data structures, helper abstractions, or algorithm flows.
- Runtime Assertions and Defensive Checks:
* Any introduction or alteration of assertions (WARN_ON*, VM_WARN_ON*, BUG_ON*, etc.) in reachable paths.
- Reachable Drivers and Protocols:
* Drivers accessible via virtual buses (virtio, USB gadget, loopback, netlink, binder, sockets, etc.).
================================================================================
4. EXTRACTING FocusSymbols (PREVENTING DILUTION)
================================================================================
When WorthFuzzing=true, you must extract specific kernel functions into FocusSymbols to guide the fuzzer:
- AVOID UBIQUITOUS LIFECYCLE HOT-PATHS:
Do NOT list generic, ubiquitous functions called by almost every program in the corpus
(including, but not limited to: general memory allocators and deallocators, page fault
and trap handlers, or core synchronization primitives; this is not an exhaustive list).
Listing ubiquitous functions causes the fuzzer to classify thousands of unrelated tests as "focused",
which severely dilutes fuzzing effort away from the actual changes.
- TARGET SPECIFIC FEATURE LOGIC AND ENTRYPOINTS:
List functions that specifically implement the logic being added or altered, or direct API entrypoints
for the subsystem feature under review.
- HANDLING STATIC INLINE FUNCTIONS IN HEADERS (.h):
Compiler-inlined static functions (such as static inlines in mm/*.h or include/linux/*.h) lack
distinct symbol addresses in vmlinux and cannot be targeted directly by symbol coverage filters.
If the changes are primarily in static inline helpers, identify non-static, feature-specific caller
functions in .c files that exercise them (avoiding ubiquitous lifecycle wrappers).
================================================================================
5. IDENTIFYING EnableConfigs
================================================================================
Identify any specific CONFIG_ options required to properly compile and reach the modified code:
- Inspect Kconfig files and #ifdef guards; do not make assumptions.
- Check "depends on" lines in Kconfig to include any non-standard parent subsystem configs needed.
- Strip any 'CONFIG_' prefix (e.g., return "NET_IPV4" instead of "CONFIG_NET_IPV4").
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Target architecture: amd64
For your convenience, here is the diff of the changes:
commit a31a7d2fdcfca135114de392812aaeeb9c18b205
Author: syz-cluster <triage@syzkaller.com>
Date: Thu Sep 17 17:19:07 2026 +0000
syz-cluster: applied patch under review
diff --git a/drivers/regulator/rt6190-regulator.c b/drivers/regulator/rt6190-regulator.c
index 3883440295edf..bf99e18f6d5b0 100644
--- a/drivers/regulator/rt6190-regulator.c
+++ b/drivers/regulator/rt6190-regulator.c
@@ -109,19 +109,27 @@ static int rt6190_out_enable(struct regulator_dev *rdev)
ret = regmap_raw_read(regmap, RT6190_REG_OUTV, out_cfg,
sizeof(out_cfg));
if (ret)
- return ret;
+ goto err_pm_put;
ret = regulator_enable_regmap(rdev);
if (ret)
- return ret;
+ goto err_pm_put;
ret = regmap_raw_write(regmap, RT6190_REG_OUTV, out_cfg,
sizeof(out_cfg));
if (ret)
- return ret;
+ goto err_pm_put;
+
+ ret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK,
+ RT6190_ENGCP_MASK);
+ if (ret)
+ goto err_pm_put;
+
+ return 0;
- return regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK,
- RT6190_ENGCP_MASK);
+err_pm_put:
+ pm_runtime_put(data->dev);
+ return ret;
}
static int rt6190_out_disable(struct regulator_dev *rdev)
|
| 3/2 | 2026/09/17 17:19 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 3158 output: 42 thoughts: 61 Thoughts: **Analyzing the Regulator Patch** Okay, let's dive into this. My initial approach would be to meticulously analyze the provided patch. I'd start by either using `git grep` to identify the relevant code changes or, if that seems too broad, I'll go straight to the source. Specifically, I know that the `drivers/regulator/` directory is the likely location for this and, given the mention, `rt6190-regulator.c` is the prime suspect. Therefore, my next action is to carefully read and thoroughly understand the contents of `drivers/regulator/rt6190-regulator.c`. I need to grasp the existing code base before I can assess the impact and implications of the proposed modifications. I want to build a solid mental model of the regulator's functionality within this file. |
| 4/2 | 2026/09/17 17:19 | tool | read-file |
0mArgs:{
"File": "drivers/regulator/rt6190-regulator.c",
"FirstLine": 80,
"LineCount": 80
}Results: {
"Contents": " 80:\t\n 81:\t\treturn regmap_raw_write(regmap, RT6190_REG_OUTV, \u0026le_sel,\n 82:\t\t\t\t\tsizeof(le_sel));\n 83:\t}\n 84:\t\n 85:\tstatic int rt6190_out_get_voltage_sel(struct regulator_dev *rdev)\n 86:\t{\n 87:\t\tstruct regmap *regmap = rdev_get_regmap(rdev);\n 88:\t\t__le16 le_sel;\n 89:\t\tint ret;\n 90:\t\n 91:\t\tret = regmap_raw_read(regmap, RT6190_REG_OUTV, \u0026le_sel, sizeof(le_sel));\n 92:\t\n 93:\t\treturn ret ?: le16_to_cpu(le_sel);\n 94:\t}\n 95:\t\n 96:\tstatic int rt6190_out_enable(struct regulator_dev *rdev)\n 97:\t{\n 98:\t\tstruct rt6190_data *data = rdev_get_drvdata(rdev);\n 99:\t\tstruct regmap *regmap = rdev_get_regmap(rdev);\n 100:\t\tu8 out_cfg[4];\n 101:\t\tint ret;\n 102:\t\n 103:\t\tpm_runtime_get_sync(data-\u003edev);\n 104:\t\n 105:\t\t/*\n 106:\t\t * From off to on, vout config will restore to IC default.\n 107:\t\t * Read vout configs before enable, and restore them after enable\n 108:\t\t */\n 109:\t\tret = regmap_raw_read(regmap, RT6190_REG_OUTV, out_cfg,\n 110:\t\t\t\t sizeof(out_cfg));\n 111:\t\tif (ret)\n 112:\t\t\tgoto err_pm_put;\n 113:\t\n 114:\t\tret = regulator_enable_regmap(rdev);\n 115:\t\tif (ret)\n 116:\t\t\tgoto err_pm_put;\n 117:\t\n 118:\t\tret = regmap_raw_write(regmap, RT6190_REG_OUTV, out_cfg,\n 119:\t\t\t\t sizeof(out_cfg));\n 120:\t\tif (ret)\n 121:\t\t\tgoto err_pm_put;\n 122:\t\n 123:\t\tret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK,\n 124:\t\t\t\t\t RT6190_ENGCP_MASK);\n 125:\t\tif (ret)\n 126:\t\t\tgoto err_pm_put;\n 127:\t\n 128:\t\treturn 0;\n 129:\t\n 130:\terr_pm_put:\n 131:\t\tpm_runtime_put(data-\u003edev);\n 132:\t\treturn ret;\n 133:\t}\n 134:\t\n 135:\tstatic int rt6190_out_disable(struct regulator_dev *rdev)\n 136:\t{\n 137:\t\tstruct rt6190_data *data = rdev_get_drvdata(rdev);\n 138:\t\tstruct regmap *regmap = rdev_get_regmap(rdev);\n 139:\t\tint ret;\n 140:\t\n 141:\t\tret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK, 0);\n 142:\t\tif (ret)\n 143:\t\t\treturn ret;\n 144:\t\n 145:\t\tret = regulator_disable_regmap(rdev);\n 146:\t\tif (ret)\n 147:\t\t\treturn ret;\n 148:\t\n 149:\t\t/* cleared cached alert event */\n 150:\t\tdata-\u003ecached_alert_evt = 0;\n 151:\t\n 152:\t\tpm_runtime_put(data-\u003edev);\n 153:\t\n 154:\t\treturn 0;\n 155:\t}\n 156:\t\n 157:\tstatic int rt6190_out_set_current_limit(struct regulator_dev *rdev, int min_uA,\n 158:\t\t\t\t\t\tint max_uA)\n 159:\t{\n"
} |
| 5/2 | 2026/09/17 17:19 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 4632 output: 41 thoughts: 47 Thoughts: Okay, let's dive into this. I need to understand what this `rt6190` is all about. The first thing I'll do, as always, is go straight to the source. I'm going to start by examining the `drivers/regulator/rt6190-regulator.c` file. Specifically, I'll focus on lines 1 through 80, which typically contain the core definitions and structures, including header includes, maybe some device IDs, and initial function declarations. I also want to take a quick peek at the end of the file, just to see what kind of closing comments or module stuff is there. That will give me a first overview of the code, so I can start to understand this regulator. |
| 6/2 | 2026/09/17 17:19 | tool | read-file |
0mArgs:{
"File": "drivers/regulator/rt6190-regulator.c",
"FirstLine": 1,
"LineCount": 80
}Results: {
"Contents": " 1:\t// SPDX-License-Identifier: GPL-2.0-only\n 2:\t/*\n 3:\t * Copyright (C) 2022 Richtek Technology Corp.\n 4:\t *\n 5:\t * Author: ChiYuan Huang \u003ccy_huang@richtek.com\u003e\n 6:\t *\n 7:\t */\n 8:\t\n 9:\t#include \u003clinux/bits.h\u003e\n 10:\t#include \u003clinux/delay.h\u003e\n 11:\t#include \u003clinux/gpio/consumer.h\u003e\n 12:\t#include \u003clinux/i2c.h\u003e\n 13:\t#include \u003clinux/interrupt.h\u003e\n 14:\t#include \u003clinux/kernel.h\u003e\n 15:\t#include \u003clinux/mod_devicetable.h\u003e\n 16:\t#include \u003clinux/module.h\u003e\n 17:\t#include \u003clinux/pm_runtime.h\u003e\n 18:\t#include \u003clinux/regmap.h\u003e\n 19:\t#include \u003clinux/regulator/consumer.h\u003e\n 20:\t#include \u003clinux/regulator/driver.h\u003e\n 21:\t#include \u003clinux/regulator/of_regulator.h\u003e\n 22:\t\n 23:\t#define RT6190_REG_VID\t\t0x00\n 24:\t#define RT6190_REG_OUTV\t\t0x01\n 25:\t#define RT6190_REG_OUTC\t\t0x03\n 26:\t#define RT6190_REG_SET1\t\t0x0D\n 27:\t#define RT6190_REG_SET2\t\t0x0E\n 28:\t#define RT6190_REG_SET4\t\t0x10\n 29:\t#define RT6190_REG_RATIO\t0x11\n 30:\t#define RT6190_REG_OUT_VOLT_L\t0x12\n 31:\t#define RT6190_REG_TEMP_H\t0x1B\n 32:\t#define RT6190_REG_STAT1\t0x1C\n 33:\t#define RT6190_REG_ALERT1\t0x1E\n 34:\t#define RT6190_REG_ALERT2\t0x1F\n 35:\t#define RT6190_REG_MASK2\t0x21\n 36:\t#define RT6190_REG_OCPEN\t0x28\n 37:\t#define RT6190_REG_SET5\t\t0x29\n 38:\t#define RT6190_REG_VBUSC_ADC\t0x32\n 39:\t#define RT6190_REG_BUSC_VOLT_L\t0x33\n 40:\t#define RT6190_REG_BUSC_VOLT_H\t0x34\n 41:\t#define RT6190_REG_STAT3\t0x37\n 42:\t#define RT6190_REG_ALERT3\t0x38\n 43:\t#define RT6190_REG_MASK3\t0x39\n 44:\t\n 45:\t#define RT6190_ENPWM_MASK\tBIT(7)\n 46:\t#define RT6190_ENDCHG_MASK\tBIT(4)\n 47:\t#define RT6190_ALERT_OTPEVT\tBIT(6)\n 48:\t#define RT6190_ALERT_UVPEVT\tBIT(5)\n 49:\t#define RT6190_ALERT_OVPEVT\tBIT(4)\n 50:\t#define RT6190_ENGCP_MASK\tBIT(1)\n 51:\t#define RT6190_FCCM_MASK\tBIT(7)\n 52:\t\n 53:\t#define RICHTEK_VID\t\t0x82\n 54:\t#define RT6190_OUT_MIN_UV\t3000000\n 55:\t#define RT6190_OUT_MAX_UV\t32000000\n 56:\t#define RT6190_OUT_STEP_UV\t20000\n 57:\t#define RT6190_OUT_N_VOLT\t(RT6190_OUT_MAX_UV / RT6190_OUT_STEP_UV + 1)\n 58:\t#define RT6190_OUTV_MINSEL\t150\n 59:\t#define RT6190_OUT_MIN_UA\t306000\n 60:\t#define RT6190_OUT_MAX_UA\t12114000\n 61:\t#define RT6190_OUT_STEP_UA\t24000\n 62:\t#define RT6190_OUTC_MINSEL\t19\n 63:\t#define RT6190_EN_TIME_US\t500\n 64:\t\n 65:\t#define RT6190_PSM_MODE\t\t0\n 66:\t#define RT6190_FCCM_MODE\t1\n 67:\t\n 68:\tstruct rt6190_data {\n 69:\t\tstruct device *dev;\n 70:\t\tstruct regmap *regmap;\n 71:\t\tstruct gpio_desc *enable_gpio;\n 72:\t\tunsigned int cached_alert_evt;\n 73:\t};\n 74:\t\n 75:\tstatic int rt6190_out_set_voltage_sel(struct regulator_dev *rdev,\n 76:\t\t\t\t\t unsigned int selector)\n 77:\t{\n 78:\t\tstruct regmap *regmap = rdev_get_regmap(rdev);\n 79:\t\t__le16 le_sel = cpu_to_le16(selector);\n 80:\t\n"
} |
| 7/2 | 2026/09/17 17:19 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 6412 output: 43 thoughts: 12 Thoughts: Okay, here's the summary, rendered in the first person, assuming an expert user: **Deep Dive Checkpoint** Alright, I've thoroughly reviewed the file, top to bottom. But I've learned a few hard lessons over the years, and one of them is to *never* assume anything. So, before I call this analysis complete, I'm going to double back and hit the tail end of this file, too. You never know where they might have buried a critical data point, an overlooked anomaly, or a crucial addendum. Going back to the bottom. Let's make sure there aren't any surprises hiding down there. Gotta ensure this is a comprehensive understanding of the situation. |
| 8/2 | 2026/09/17 17:19 | tool | read-file |
0mArgs:{
"File": "drivers/regulator/rt6190-regulator.c",
"FirstLine": 220,
"LineCount": 80
}Results: {
"Contents": " 220:\t\tunsigned int config;\n 221:\t\tint ret;\n 222:\t\n 223:\t\tret = regmap_read(regmap, RT6190_REG_SET1, \u0026config);\n 224:\t\tif (ret)\n 225:\t\t\treturn REGULATOR_MODE_INVALID;\n 226:\t\n 227:\t\tif (config \u0026 RT6190_FCCM_MASK)\n 228:\t\t\treturn REGULATOR_MODE_FAST;\n 229:\t\n 230:\t\treturn REGULATOR_MODE_NORMAL;\n 231:\t}\n 232:\t\n 233:\tstatic int rt6190_out_get_error_flags(struct regulator_dev *rdev,\n 234:\t\t\t\t\t unsigned int *flags)\n 235:\t{\n 236:\t\tstruct rt6190_data *data = rdev_get_drvdata(rdev);\n 237:\t\tunsigned int state, rpt_flags = 0;\n 238:\t\tint ret;\n 239:\t\n 240:\t\tret = regmap_read(data-\u003eregmap, RT6190_REG_STAT1, \u0026state);\n 241:\t\tif (ret)\n 242:\t\t\treturn ret;\n 243:\t\n 244:\t\tstate |= data-\u003ecached_alert_evt;\n 245:\t\n 246:\t\tif (state \u0026 RT6190_ALERT_OTPEVT)\n 247:\t\t\trpt_flags |= REGULATOR_ERROR_OVER_TEMP;\n 248:\t\n 249:\t\tif (state \u0026 RT6190_ALERT_UVPEVT)\n 250:\t\t\trpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;\n 251:\t\n 252:\t\tif (state \u0026 RT6190_ALERT_OVPEVT)\n 253:\t\t\trpt_flags |= REGULATOR_ERROR_REGULATION_OUT;\n 254:\t\n 255:\t\t*flags = rpt_flags;\n 256:\t\n 257:\t\treturn 0;\n 258:\t}\n 259:\t\n 260:\tstatic unsigned int rt6190_out_of_map_mode(unsigned int mode)\n 261:\t{\n 262:\t\tswitch (mode) {\n 263:\t\tcase RT6190_PSM_MODE:\n 264:\t\t\treturn REGULATOR_MODE_NORMAL;\n 265:\t\tcase RT6190_FCCM_MODE:\n 266:\t\t\treturn REGULATOR_MODE_FAST;\n 267:\t\tdefault:\n 268:\t\t\treturn REGULATOR_MODE_INVALID;\n 269:\t\t}\n 270:\t}\n 271:\t\n 272:\tstatic const struct regulator_ops rt6190_regulator_ops = {\n 273:\t\t.list_voltage = regulator_list_voltage_linear,\n 274:\t\t.set_voltage_sel = rt6190_out_set_voltage_sel,\n 275:\t\t.get_voltage_sel = rt6190_out_get_voltage_sel,\n 276:\t\t.enable = rt6190_out_enable,\n 277:\t\t.disable = rt6190_out_disable,\n 278:\t\t.is_enabled = regulator_is_enabled_regmap,\n 279:\t\t.set_current_limit = rt6190_out_set_current_limit,\n 280:\t\t.get_current_limit = rt6190_out_get_current_limit,\n 281:\t\t.set_active_discharge = regulator_set_active_discharge_regmap,\n 282:\t\t.set_mode = rt6190_out_set_mode,\n 283:\t\t.get_mode = rt6190_out_get_mode,\n 284:\t\t.get_error_flags = rt6190_out_get_error_flags,\n 285:\t};\n 286:\t\n 287:\tstatic const struct regulator_desc rt6190_regulator_desc = {\n 288:\t\t.name = \"rt6190-regulator\",\n 289:\t\t.type = REGULATOR_VOLTAGE,\n 290:\t\t.owner = THIS_MODULE,\n 291:\t\t.ops = \u0026rt6190_regulator_ops,\n 292:\t\t.min_uV = RT6190_OUT_MIN_UV,\n 293:\t\t.uV_step = RT6190_OUT_STEP_UV,\n 294:\t\t.n_voltages = RT6190_OUT_N_VOLT,\n 295:\t\t.linear_min_sel = RT6190_OUTV_MINSEL,\n 296:\t\t.enable_reg = RT6190_REG_SET2,\n 297:\t\t.enable_mask = RT6190_ENPWM_MASK,\n 298:\t\t.active_discharge_reg = RT6190_REG_SET2,\n 299:\t\t.active_discharge_mask = RT6190_ENDCHG_MASK,\n"
} |
| 9/2 | 2026/09/17 17:19 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 8000 output: 43 thoughts: 11 Thoughts: Okay, here's my interpretation of that thought process, tailored for an expert audience, and written in the first person: **Analyzing the Probe/Init Sequence** Alright, so the first thing I'm thinking is, "Let's dig in deeper and review the remaining components of the probe/init process." Given the context of a previous discussion – whatever that was about – I'm clearly not satisfied with the cursory overview, and I want to understand the complete picture of this process, the full workflow. I'm looking for the specifics. I'm probably looking at a snippet of code, a system diagram, or some documentation. What remains of that? |
| 10/2 | 2026/09/17 17:19 | tool | read-file |
0mArgs:{
"File": "drivers/regulator/rt6190-regulator.c",
"FirstLine": 300,
"LineCount": 80
}Results: {
"Contents": " 300:\t\t.active_discharge_on = RT6190_ENDCHG_MASK,\n 301:\t\t.of_map_mode = rt6190_out_of_map_mode,\n 302:\t};\n 303:\t\n 304:\tstatic bool rt6190_is_volatile_reg(struct device *dev, unsigned int reg)\n 305:\t{\n 306:\t\tswitch (reg) {\n 307:\t\tcase RT6190_REG_OUT_VOLT_L ... RT6190_REG_ALERT2:\n 308:\t\tcase RT6190_REG_BUSC_VOLT_L ... RT6190_REG_BUSC_VOLT_H:\n 309:\t\tcase RT6190_REG_STAT3 ... RT6190_REG_ALERT3:\n 310:\t\t\treturn true;\n 311:\t\tdefault:\n 312:\t\t\treturn false;\n 313:\t\t}\n 314:\t}\n 315:\t\n 316:\tstatic const struct regmap_config rt6190_regmap_config = {\n 317:\t\t.name = \"rt6190\",\n 318:\t\t.cache_type = REGCACHE_FLAT,\n 319:\t\t.reg_bits = 8,\n 320:\t\t.val_bits = 8,\n 321:\t\t.max_register = RT6190_REG_MASK3,\n 322:\t\t.num_reg_defaults_raw = RT6190_REG_MASK3 + 1,\n 323:\t\t.volatile_reg = rt6190_is_volatile_reg,\n 324:\t};\n 325:\t\n 326:\tstatic irqreturn_t rt6190_irq_handler(int irq, void *devid)\n 327:\t{\n 328:\t\tstruct regulator_dev *rdev = devid;\n 329:\t\tstruct rt6190_data *data = rdev_get_drvdata(rdev);\n 330:\t\tunsigned int alert;\n 331:\t\tint ret;\n 332:\t\n 333:\t\tret = regmap_read(data-\u003eregmap, RT6190_REG_ALERT1, \u0026alert);\n 334:\t\tif (ret)\n 335:\t\t\treturn IRQ_NONE;\n 336:\t\n 337:\t\t/* Write clear alert events */\n 338:\t\tret = regmap_write(data-\u003eregmap, RT6190_REG_ALERT1, alert);\n 339:\t\tif (ret)\n 340:\t\t\treturn IRQ_NONE;\n 341:\t\n 342:\t\tdata-\u003ecached_alert_evt |= alert;\n 343:\t\n 344:\t\tif (alert \u0026 RT6190_ALERT_OTPEVT)\n 345:\t\t\tregulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_TEMP, NULL);\n 346:\t\n 347:\t\tif (alert \u0026 RT6190_ALERT_UVPEVT)\n 348:\t\t\tregulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE, NULL);\n 349:\t\n 350:\t\tif (alert \u0026 RT6190_ALERT_OVPEVT)\n 351:\t\t\tregulator_notifier_call_chain(rdev, REGULATOR_EVENT_REGULATION_OUT, NULL);\n 352:\t\n 353:\t\treturn IRQ_HANDLED;\n 354:\t}\n 355:\t\n 356:\tstatic int rt6190_init_registers(struct regmap *regmap)\n 357:\t{\n 358:\t\tint ret;\n 359:\t\n 360:\t\t/* Enable_ADC = 1 */\n 361:\t\tret = regmap_write(regmap, RT6190_REG_SET4, 0x82);\n 362:\t\tif (ret)\n 363:\t\t\treturn ret;\n 364:\t\n 365:\t\t/* Config default VOUT ratio to be higher */\n 366:\t\tret = regmap_write(regmap, RT6190_REG_RATIO, 0x20);\n 367:\t\n 368:\t\t/* Mask unused alert */\n 369:\t\tret = regmap_write(regmap, RT6190_REG_MASK2, 0);\n 370:\t\tif (ret)\n 371:\t\t\treturn ret;\n 372:\t\n 373:\t\t/* OCP config */\n 374:\t\tret = regmap_write(regmap, RT6190_REG_OCPEN, 0);\n 375:\t\tif (ret)\n 376:\t\t\treturn ret;\n 377:\t\n 378:\t\t/* Enable VBUSC ADC */\n 379:\t\treturn regmap_write(regmap, RT6190_REG_VBUSC_ADC, 0x02);\n"
} |
| 11/2 | 2026/09/17 17:19 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 9536 output: 43 thoughts: 14 Thoughts: Okay, I'm ready to dive into this text. Here's my thought process, summarized as you requested: **Assessing the Scope** Alright, I'm starting by mentally flagging that the instruction specifies examining the text *up to* line 450. That's my immediate perimeter. I need to make sure I don't get sidetracked by anything that comes later. My brain, as an expert in my field, is already starting to form questions: Is this a methodology? A study description? A piece of philosophical writing? Knowing the subject matter will inform how I approach this. |
| 12/2 | 2026/09/17 17:19 | tool | read-file |
0mArgs:{
"File": "drivers/regulator/rt6190-regulator.c",
"FirstLine": 380,
"LineCount": 80
}Results: {
"Contents": " 380:\t}\n 381:\t\n 382:\tstatic int rt6190_probe(struct i2c_client *i2c)\n 383:\t{\n 384:\t\tstruct device *dev = \u0026i2c-\u003edev;\n 385:\t\tstruct rt6190_data *data;\n 386:\t\tstruct gpio_desc *enable_gpio;\n 387:\t\tstruct regmap *regmap;\n 388:\t\tstruct regulator_dev *rdev;\n 389:\t\tstruct regulator_config cfg = {};\n 390:\t\tunsigned int vid;\n 391:\t\tint ret;\n 392:\t\n 393:\t\tdata = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);\n 394:\t\tif (!data)\n 395:\t\t\treturn -ENOMEM;\n 396:\t\n 397:\t\tenable_gpio = devm_gpiod_get_optional(dev, \"enable\", GPIOD_OUT_HIGH);\n 398:\t\tif (IS_ERR(enable_gpio))\n 399:\t\t\treturn dev_err_probe(dev, PTR_ERR(enable_gpio), \"Failed to get 'enable' gpio\\n\");\n 400:\t\telse if (enable_gpio)\n 401:\t\t\tusleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);\n 402:\t\n 403:\t\tregmap = devm_regmap_init_i2c(i2c, \u0026rt6190_regmap_config);\n 404:\t\tif (IS_ERR(regmap))\n 405:\t\t\treturn dev_err_probe(dev, PTR_ERR(regmap), \"Failed to init regmap\\n\");\n 406:\t\n 407:\t\tdata-\u003edev = dev;\n 408:\t\tdata-\u003eenable_gpio = enable_gpio;\n 409:\t\tdata-\u003eregmap = regmap;\n 410:\t\ti2c_set_clientdata(i2c, data);\n 411:\t\n 412:\t\tret = regmap_read(regmap, RT6190_REG_VID, \u0026vid);\n 413:\t\tif (ret)\n 414:\t\t\treturn dev_err_probe(dev, ret, \"Failed to read VID\\n\");\n 415:\t\n 416:\t\tif (vid != RICHTEK_VID)\n 417:\t\t\treturn dev_err_probe(dev, -ENODEV, \"Incorrect VID 0x%02x\\n\", vid);\n 418:\t\n 419:\t\tret = rt6190_init_registers(regmap);\n 420:\t\tif (ret)\n 421:\t\t\treturn dev_err_probe(dev, ret, \"Failed to init registers\\n\");\n 422:\t\n 423:\t\tpm_runtime_set_active(dev);\n 424:\t\tret = devm_pm_runtime_enable(dev);\n 425:\t\tif (ret)\n 426:\t\t\treturn dev_err_probe(dev, ret, \"Failed to set pm_runtime enable\\n\");\n 427:\t\n 428:\t\tcfg.dev = dev;\n 429:\t\tcfg.of_node = dev-\u003eof_node;\n 430:\t\tcfg.driver_data = data;\n 431:\t\tcfg.init_data = of_get_regulator_init_data(dev, dev-\u003eof_node,\n 432:\t\t\t\t\t\t\t \u0026rt6190_regulator_desc);\n 433:\t\n 434:\t\trdev = devm_regulator_register(dev, \u0026rt6190_regulator_desc, \u0026cfg);\n 435:\t\tif (IS_ERR(rdev))\n 436:\t\t\treturn dev_err_probe(dev, PTR_ERR(rdev), \"Failed to register regulator\\n\");\n 437:\t\n 438:\t\tif (i2c-\u003eirq) {\n 439:\t\t\tret = devm_request_threaded_irq(dev, i2c-\u003eirq, NULL,\n 440:\t\t\t\t\t\t\trt6190_irq_handler,\n 441:\t\t\t\t\t\t\tIRQF_ONESHOT, dev_name(dev),\n 442:\t\t\t\t\t\t\trdev);\n 443:\t\t\tif (ret)\n 444:\t\t\t\treturn dev_err_probe(dev, ret, \"Failed to register interrupt\\n\");\n 445:\t\t}\n 446:\t\n 447:\t\treturn 0;\n 448:\t}\n 449:\t\n 450:\tstatic int rt6190_runtime_suspend(struct device *dev)\n 451:\t{\n 452:\t\tstruct rt6190_data *data = dev_get_drvdata(dev);\n 453:\t\tstruct regmap *regmap = data-\u003eregmap;\n 454:\t\n 455:\t\tif (!data-\u003eenable_gpio)\n 456:\t\t\treturn 0;\n 457:\t\n 458:\t\tregcache_cache_only(regmap, true);\n 459:\t\tregcache_mark_dirty(regmap);\n"
} |
| 13/2 | 2026/09/17 17:19 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 11086 output: 43 thoughts: 10 Thoughts: Okay, I'm ready to receive the text and provide a first-person summary of the described thoughts, tailored for an expert audience. I understand the goal is a detailed walkthrough of the thought process, as if it were my own. Please provide the text you would like me to summarize. I will begin my response with the **bolded header** as requested. |
| 14/2 | 2026/09/17 17:19 | tool | read-file |
0mArgs:{
"File": "drivers/regulator/rt6190-regulator.c",
"FirstLine": 460,
"LineCount": 80
}Results: {
"Contents": " 460:\t\n 461:\t\tgpiod_set_value(data-\u003eenable_gpio, 0);\n 462:\t\n 463:\t\treturn 0;\n 464:\t}\n 465:\t\n 466:\tstatic int rt6190_runtime_resume(struct device *dev)\n 467:\t{\n 468:\t\tstruct rt6190_data *data = dev_get_drvdata(dev);\n 469:\t\tstruct regmap *regmap = data-\u003eregmap;\n 470:\t\n 471:\t\tif (!data-\u003eenable_gpio)\n 472:\t\t\treturn 0;\n 473:\t\n 474:\t\tgpiod_set_value(data-\u003eenable_gpio, 1);\n 475:\t\tusleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);\n 476:\t\n 477:\t\tregcache_cache_only(regmap, false);\n 478:\t\treturn regcache_sync(regmap);\n 479:\t}\n 480:\t\n 481:\tstatic const struct dev_pm_ops __maybe_unused rt6190_dev_pm = {\n 482:\t\tRUNTIME_PM_OPS(rt6190_runtime_suspend, rt6190_runtime_resume, NULL)\n 483:\t};\n 484:\t\n 485:\tstatic const struct of_device_id rt6190_of_dev_table[] = {\n 486:\t\t{ .compatible = \"richtek,rt6190\" },\n 487:\t\t{}\n 488:\t};\n 489:\tMODULE_DEVICE_TABLE(of, rt6190_of_dev_table);\n 490:\t\n 491:\tstatic struct i2c_driver rt6190_driver = {\n 492:\t\t.driver = {\n 493:\t\t\t.name = \"rt6190\",\n 494:\t\t\t.probe_type = PROBE_PREFER_ASYNCHRONOUS,\n 495:\t\t\t.of_match_table = rt6190_of_dev_table,\n 496:\t\t\t.pm = pm_ptr(\u0026rt6190_dev_pm),\n 497:\t\t},\n 498:\t\t.probe = rt6190_probe,\n 499:\t};\n 500:\tmodule_i2c_driver(rt6190_driver);\n 501:\t\n 502:\tMODULE_DESCRIPTION(\"Richtek RT6190 regulator driver\");\n 503:\tMODULE_AUTHOR(\"ChiYuan Huang \u003ccy_huang@richtek.com\u003e\");\n 504:\tMODULE_LICENSE(\"GPL\");\n"
} |
| 15/2 | 2026/09/17 17:19 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 11961 output: 29 thoughts: 29 Thoughts: Here's my take on those thoughts: **Investigating the RT6190 Regulator Configuration** Okay, so I need to figure out which Kconfig option controls the configuration for the rt6190 regulator. My first step is to dive into the standard location for regulator Kconfig options: `drivers/regulator/Kconfig`. That's the obvious place to start. Let's see what's in there. I'm assuming that it will use the standard Kconfig syntax and dependencies so I will keep an eye out for how this device may have been incorporated into the overall regulator structure. |
| 16/2 | 2026/09/17 17:19 | tool | grepper |
0mArgs:{
"Expression": "RT6190",
"PathPrefix": "drivers/regulator"
}Results: {
"Output": "drivers/regulator/Kconfig=1368=config REGULATOR_RT6160\n--\ndrivers/regulator/Kconfig-1378-\ndrivers/regulator/Kconfig:1379:config REGULATOR_RT6190\ndrivers/regulator/Kconfig:1380:\ttristate \"Richtek RT6190 4-Switch BuckBoost controller\"\ndrivers/regulator/Kconfig-1381-\tdepends on I2C\n--\ndrivers/regulator/Kconfig-1383-\thelp\ndrivers/regulator/Kconfig:1384:\t The RT6190 is a 4-Switch BuckBoost controller designed for converting\ndrivers/regulator/Kconfig-1385-\t input voltage to output voltage that can be equal to, higher or lower\n--\ndrivers/regulator/Makefile=161=obj-$(CONFIG_REGULATOR_RT6160)\t+= rt6160-regulator.o\ndrivers/regulator/Makefile:162:obj-$(CONFIG_REGULATOR_RT6190)\t+= rt6190-regulator.o\ndrivers/regulator/Makefile-163-obj-$(CONFIG_REGULATOR_RT6245)\t+= rt6245-regulator.o\n--\ndrivers/regulator/rt6190-regulator.c-22-\ndrivers/regulator/rt6190-regulator.c:23:#define RT6190_REG_VID\t\t0x00\ndrivers/regulator/rt6190-regulator.c:24:#define RT6190_REG_OUTV\t\t0x01\ndrivers/regulator/rt6190-regulator.c:25:#define RT6190_REG_OUTC\t\t0x03\ndrivers/regulator/rt6190-regulator.c:26:#define RT6190_REG_SET1\t\t0x0D\ndrivers/regulator/rt6190-regulator.c:27:#define RT6190_REG_SET2\t\t0x0E\ndrivers/regulator/rt6190-regulator.c:28:#define RT6190_REG_SET4\t\t0x10\ndrivers/regulator/rt6190-regulator.c:29:#define RT6190_REG_RATIO\t0x11\ndrivers/regulator/rt6190-regulator.c:30:#define RT6190_REG_OUT_VOLT_L\t0x12\ndrivers/regulator/rt6190-regulator.c:31:#define RT6190_REG_TEMP_H\t0x1B\ndrivers/regulator/rt6190-regulator.c:32:#define RT6190_REG_STAT1\t0x1C\ndrivers/regulator/rt6190-regulator.c:33:#define RT6190_REG_ALERT1\t0x1E\ndrivers/regulator/rt6190-regulator.c:34:#define RT6190_REG_ALERT2\t0x1F\ndrivers/regulator/rt6190-regulator.c:35:#define RT6190_REG_MASK2\t0x21\ndrivers/regulator/rt6190-regulator.c:36:#define RT6190_REG_OCPEN\t0x28\ndrivers/regulator/rt6190-regulator.c:37:#define RT6190_REG_SET5\t\t0x29\ndrivers/regulator/rt6190-regulator.c:38:#define RT6190_REG_VBUSC_ADC\t0x32\ndrivers/regulator/rt6190-regulator.c:39:#define RT6190_REG_BUSC_VOLT_L\t0x33\ndrivers/regulator/rt6190-regulator.c:40:#define RT6190_REG_BUSC_VOLT_H\t0x34\ndrivers/regulator/rt6190-regulator.c:41:#define RT6190_REG_STAT3\t0x37\ndrivers/regulator/rt6190-regulator.c:42:#define RT6190_REG_ALERT3\t0x38\ndrivers/regulator/rt6190-regulator.c:43:#define RT6190_REG_MASK3\t0x39\ndrivers/regulator/rt6190-regulator.c-44-\ndrivers/regulator/rt6190-regulator.c:45:#define RT6190_ENPWM_MASK\tBIT(7)\ndrivers/regulator/rt6190-regulator.c:46:#define RT6190_ENDCHG_MASK\tBIT(4)\ndrivers/regulator/rt6190-regulator.c:47:#define RT6190_ALERT_OTPEVT\tBIT(6)\ndrivers/regulator/rt6190-regulator.c:48:#define RT6190_ALERT_UVPEVT\tBIT(5)\ndrivers/regulator/rt6190-regulator.c:49:#define RT6190_ALERT_OVPEVT\tBIT(4)\ndrivers/regulator/rt6190-regulator.c:50:#define RT6190_ENGCP_MASK\tBIT(1)\ndrivers/regulator/rt6190-regulator.c:51:#define RT6190_FCCM_MASK\tBIT(7)\ndrivers/regulator/rt6190-regulator.c-52-\ndrivers/regulator/rt6190-regulator.c-53-#define RICHTEK_VID\t\t0x82\ndrivers/regulator/rt6190-regulator.c:54:#define RT6190_OUT_MIN_UV\t3000000\ndrivers/regulator/rt6190-regulator.c:55:#define RT6190_OUT_MAX_UV\t32000000\ndrivers/regulator/rt6190-regulator.c:56:#define RT6190_OUT_STEP_UV\t20000\ndrivers/regulator/rt6190-regulator.c:57:#define RT6190_OUT_N_VOLT\t(RT6190_OUT_MAX_UV / RT6190_OUT_STEP_UV + 1)\ndrivers/regulator/rt6190-regulator.c:58:#define RT6190_OUTV_MINSEL\t150\ndrivers/regulator/rt6190-regulator.c:59:#define RT6190_OUT_MIN_UA\t306000\ndrivers/regulator/rt6190-regulator.c:60:#define RT6190_OUT_MAX_UA\t12114000\ndrivers/regulator/rt6190-regulator.c:61:#define RT6190_OUT_STEP_UA\t24000\ndrivers/regulator/rt6190-regulator.c:62:#define RT6190_OUTC_MINSEL\t19\ndrivers/regulator/rt6190-regulator.c:63:#define RT6190_EN_TIME_US\t500\ndrivers/regulator/rt6190-regulator.c-64-\ndrivers/regulator/rt6190-regulator.c:65:#define RT6190_PSM_MODE\t\t0\ndrivers/regulator/rt6190-regulator.c:66:#define RT6190_FCCM_MODE\t1\ndrivers/regulator/rt6190-regulator.c-67-\n--\ndrivers/regulator/rt6190-regulator.c=75=static int rt6190_out_set_voltage_sel(struct regulator_dev *rdev,\n--\ndrivers/regulator/rt6190-regulator.c-80-\ndrivers/regulator/rt6190-regulator.c:81:\treturn regmap_raw_write(regmap, RT6190_REG_OUTV, \u0026le_sel,\ndrivers/regulator/rt6190-regulator.c-82-\t\t\t\tsizeof(le_sel));\n--\ndrivers/regulator/rt6190-regulator.c=85=static int rt6190_out_get_voltage_sel(struct regulator_dev *rdev)\n--\ndrivers/regulator/rt6190-regulator.c-90-\ndrivers/regulator/rt6190-regulator.c:91:\tret = regmap_raw_read(regmap, RT6190_REG_OUTV, \u0026le_sel, sizeof(le_sel));\ndrivers/regulator/rt6190-regulator.c-92-\n--\ndrivers/regulator/rt6190-regulator.c=96=static int rt6190_out_enable(struct regulator_dev *rdev)\n--\ndrivers/regulator/rt6190-regulator.c-108-\t */\ndrivers/regulator/rt6190-regulator.c:109:\tret = regmap_raw_read(regmap, RT6190_REG_OUTV, out_cfg,\ndrivers/regulator/rt6190-regulator.c-110-\t\t\t sizeof(out_cfg));\n--\ndrivers/regulator/rt6190-regulator.c-117-\ndrivers/regulator/rt6190-regulator.c:118:\tret = regmap_raw_write(regmap, RT6190_REG_OUTV, out_cfg,\ndrivers/regulator/rt6190-regulator.c-119-\t\t\t sizeof(out_cfg));\n--\ndrivers/regulator/rt6190-regulator.c-122-\ndrivers/regulator/rt6190-regulator.c:123:\tret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK,\ndrivers/regulator/rt6190-regulator.c:124:\t\t\t\t RT6190_ENGCP_MASK);\ndrivers/regulator/rt6190-regulator.c-125-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c=135=static int rt6190_out_disable(struct regulator_dev *rdev)\n--\ndrivers/regulator/rt6190-regulator.c-140-\ndrivers/regulator/rt6190-regulator.c:141:\tret = regmap_update_bits(regmap, RT6190_REG_SET5, RT6190_ENGCP_MASK, 0);\ndrivers/regulator/rt6190-regulator.c-142-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c=157=static int rt6190_out_set_current_limit(struct regulator_dev *rdev, int min_uA,\n--\ndrivers/regulator/rt6190-regulator.c-163-\ndrivers/regulator/rt6190-regulator.c:164:\tif (min_uA \u003c RT6190_OUT_MIN_UA || max_uA \u003e RT6190_OUT_MAX_UA)\ndrivers/regulator/rt6190-regulator.c-165-\t\treturn -EINVAL;\ndrivers/regulator/rt6190-regulator.c-166-\ndrivers/regulator/rt6190-regulator.c:167:\tcsel = DIV_ROUND_UP(min_uA - RT6190_OUT_MIN_UA, RT6190_OUT_STEP_UA);\ndrivers/regulator/rt6190-regulator.c-168-\ndrivers/regulator/rt6190-regulator.c:169:\tclim = RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel;\ndrivers/regulator/rt6190-regulator.c-170-\tif (clim \u003e max_uA)\n--\ndrivers/regulator/rt6190-regulator.c-172-\ndrivers/regulator/rt6190-regulator.c:173:\tcsel += RT6190_OUTC_MINSEL;\ndrivers/regulator/rt6190-regulator.c-174-\tle_csel = cpu_to_le16(csel);\ndrivers/regulator/rt6190-regulator.c-175-\ndrivers/regulator/rt6190-regulator.c:176:\treturn regmap_raw_write(regmap, RT6190_REG_OUTC, \u0026le_csel,\ndrivers/regulator/rt6190-regulator.c-177-\t\t\t\tsizeof(le_csel));\n--\ndrivers/regulator/rt6190-regulator.c=180=static int rt6190_out_get_current_limit(struct regulator_dev *rdev)\n--\ndrivers/regulator/rt6190-regulator.c-185-\ndrivers/regulator/rt6190-regulator.c:186:\tret = regmap_raw_read(regmap, RT6190_REG_OUTC, \u0026le_csel,\ndrivers/regulator/rt6190-regulator.c-187-\t\t\t sizeof(le_csel));\n--\ndrivers/regulator/rt6190-regulator.c-191-\tcsel = le16_to_cpu(le_csel);\ndrivers/regulator/rt6190-regulator.c:192:\tcsel -= RT6190_OUTC_MINSEL;\ndrivers/regulator/rt6190-regulator.c-193-\ndrivers/regulator/rt6190-regulator.c:194:\treturn RT6190_OUT_MIN_UA + RT6190_OUT_STEP_UA * csel;\ndrivers/regulator/rt6190-regulator.c-195-}\n--\ndrivers/regulator/rt6190-regulator.c=197=static int rt6190_out_set_mode(struct regulator_dev *rdev, unsigned int mode)\n--\ndrivers/regulator/rt6190-regulator.c-203-\tcase REGULATOR_MODE_FAST:\ndrivers/regulator/rt6190-regulator.c:204:\t\tval = RT6190_FCCM_MASK;\ndrivers/regulator/rt6190-regulator.c-205-\t\tbreak;\n--\ndrivers/regulator/rt6190-regulator.c-212-\ndrivers/regulator/rt6190-regulator.c:213:\treturn regmap_update_bits(regmap, RT6190_REG_SET1, RT6190_FCCM_MASK,\ndrivers/regulator/rt6190-regulator.c-214-\t\t\t\t val);\n--\ndrivers/regulator/rt6190-regulator.c=217=static unsigned int rt6190_out_get_mode(struct regulator_dev *rdev)\n--\ndrivers/regulator/rt6190-regulator.c-222-\ndrivers/regulator/rt6190-regulator.c:223:\tret = regmap_read(regmap, RT6190_REG_SET1, \u0026config);\ndrivers/regulator/rt6190-regulator.c-224-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c-226-\ndrivers/regulator/rt6190-regulator.c:227:\tif (config \u0026 RT6190_FCCM_MASK)\ndrivers/regulator/rt6190-regulator.c-228-\t\treturn REGULATOR_MODE_FAST;\n--\ndrivers/regulator/rt6190-regulator.c=233=static int rt6190_out_get_error_flags(struct regulator_dev *rdev,\n--\ndrivers/regulator/rt6190-regulator.c-239-\ndrivers/regulator/rt6190-regulator.c:240:\tret = regmap_read(data-\u003eregmap, RT6190_REG_STAT1, \u0026state);\ndrivers/regulator/rt6190-regulator.c-241-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c-245-\ndrivers/regulator/rt6190-regulator.c:246:\tif (state \u0026 RT6190_ALERT_OTPEVT)\ndrivers/regulator/rt6190-regulator.c-247-\t\trpt_flags |= REGULATOR_ERROR_OVER_TEMP;\ndrivers/regulator/rt6190-regulator.c-248-\ndrivers/regulator/rt6190-regulator.c:249:\tif (state \u0026 RT6190_ALERT_UVPEVT)\ndrivers/regulator/rt6190-regulator.c-250-\t\trpt_flags |= REGULATOR_ERROR_UNDER_VOLTAGE;\ndrivers/regulator/rt6190-regulator.c-251-\ndrivers/regulator/rt6190-regulator.c:252:\tif (state \u0026 RT6190_ALERT_OVPEVT)\ndrivers/regulator/rt6190-regulator.c-253-\t\trpt_flags |= REGULATOR_ERROR_REGULATION_OUT;\n--\ndrivers/regulator/rt6190-regulator.c=260=static unsigned int rt6190_out_of_map_mode(unsigned int mode)\n--\ndrivers/regulator/rt6190-regulator.c-262-\tswitch (mode) {\ndrivers/regulator/rt6190-regulator.c:263:\tcase RT6190_PSM_MODE:\ndrivers/regulator/rt6190-regulator.c-264-\t\treturn REGULATOR_MODE_NORMAL;\ndrivers/regulator/rt6190-regulator.c:265:\tcase RT6190_FCCM_MODE:\ndrivers/regulator/rt6190-regulator.c-266-\t\treturn REGULATOR_MODE_FAST;\n--\ndrivers/regulator/rt6190-regulator.c=287=static const struct regulator_desc rt6190_regulator_desc = {\n--\ndrivers/regulator/rt6190-regulator.c-291-\t.ops = \u0026rt6190_regulator_ops,\ndrivers/regulator/rt6190-regulator.c:292:\t.min_uV = RT6190_OUT_MIN_UV,\ndrivers/regulator/rt6190-regulator.c:293:\t.uV_step = RT6190_OUT_STEP_UV,\ndrivers/regulator/rt6190-regulator.c:294:\t.n_voltages = RT6190_OUT_N_VOLT,\ndrivers/regulator/rt6190-regulator.c:295:\t.linear_min_sel = RT6190_OUTV_MINSEL,\ndrivers/regulator/rt6190-regulator.c:296:\t.enable_reg = RT6190_REG_SET2,\ndrivers/regulator/rt6190-regulator.c:297:\t.enable_mask = RT6190_ENPWM_MASK,\ndrivers/regulator/rt6190-regulator.c:298:\t.active_discharge_reg = RT6190_REG_SET2,\ndrivers/regulator/rt6190-regulator.c:299:\t.active_discharge_mask = RT6190_ENDCHG_MASK,\ndrivers/regulator/rt6190-regulator.c:300:\t.active_discharge_on = RT6190_ENDCHG_MASK,\ndrivers/regulator/rt6190-regulator.c-301-\t.of_map_mode = rt6190_out_of_map_mode,\n--\ndrivers/regulator/rt6190-regulator.c=304=static bool rt6190_is_volatile_reg(struct device *dev, unsigned int reg)\n--\ndrivers/regulator/rt6190-regulator.c-306-\tswitch (reg) {\ndrivers/regulator/rt6190-regulator.c:307:\tcase RT6190_REG_OUT_VOLT_L ... RT6190_REG_ALERT2:\ndrivers/regulator/rt6190-regulator.c:308:\tcase RT6190_REG_BUSC_VOLT_L ... RT6190_REG_BUSC_VOLT_H:\ndrivers/regulator/rt6190-regulator.c:309:\tcase RT6190_REG_STAT3 ... RT6190_REG_ALERT3:\ndrivers/regulator/rt6190-regulator.c-310-\t\treturn true;\n--\ndrivers/regulator/rt6190-regulator.c=316=static const struct regmap_config rt6190_regmap_config = {\n--\ndrivers/regulator/rt6190-regulator.c-320-\t.val_bits = 8,\ndrivers/regulator/rt6190-regulator.c:321:\t.max_register = RT6190_REG_MASK3,\ndrivers/regulator/rt6190-regulator.c:322:\t.num_reg_defaults_raw = RT6190_REG_MASK3 + 1,\ndrivers/regulator/rt6190-regulator.c-323-\t.volatile_reg = rt6190_is_volatile_reg,\n--\ndrivers/regulator/rt6190-regulator.c=326=static irqreturn_t rt6190_irq_handler(int irq, void *devid)\n--\ndrivers/regulator/rt6190-regulator.c-332-\ndrivers/regulator/rt6190-regulator.c:333:\tret = regmap_read(data-\u003eregmap, RT6190_REG_ALERT1, \u0026alert);\ndrivers/regulator/rt6190-regulator.c-334-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c-337-\t/* Write clear alert events */\ndrivers/regulator/rt6190-regulator.c:338:\tret = regmap_write(data-\u003eregmap, RT6190_REG_ALERT1, alert);\ndrivers/regulator/rt6190-regulator.c-339-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c-343-\ndrivers/regulator/rt6190-regulator.c:344:\tif (alert \u0026 RT6190_ALERT_OTPEVT)\ndrivers/regulator/rt6190-regulator.c-345-\t\tregulator_notifier_call_chain(rdev, REGULATOR_EVENT_OVER_TEMP, NULL);\ndrivers/regulator/rt6190-regulator.c-346-\ndrivers/regulator/rt6190-regulator.c:347:\tif (alert \u0026 RT6190_ALERT_UVPEVT)\ndrivers/regulator/rt6190-regulator.c-348-\t\tregulator_notifier_call_chain(rdev, REGULATOR_EVENT_UNDER_VOLTAGE, NULL);\ndrivers/regulator/rt6190-regulator.c-349-\ndrivers/regulator/rt6190-regulator.c:350:\tif (alert \u0026 RT6190_ALERT_OVPEVT)\ndrivers/regulator/rt6190-regulator.c-351-\t\tregulator_notifier_call_chain(rdev, REGULATOR_EVENT_REGULATION_OUT, NULL);\n--\ndrivers/regulator/rt6190-regulator.c=356=static int rt6190_init_registers(struct regmap *regmap)\n--\ndrivers/regulator/rt6190-regulator.c-360-\t/* Enable_ADC = 1 */\ndrivers/regulator/rt6190-regulator.c:361:\tret = regmap_write(regmap, RT6190_REG_SET4, 0x82);\ndrivers/regulator/rt6190-regulator.c-362-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c-365-\t/* Config default VOUT ratio to be higher */\ndrivers/regulator/rt6190-regulator.c:366:\tret = regmap_write(regmap, RT6190_REG_RATIO, 0x20);\ndrivers/regulator/rt6190-regulator.c-367-\ndrivers/regulator/rt6190-regulator.c-368-\t/* Mask unused alert */\ndrivers/regulator/rt6190-regulator.c:369:\tret = regmap_write(regmap, RT6190_REG_MASK2, 0);\ndrivers/regulator/rt6190-regulator.c-370-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c-373-\t/* OCP config */\ndrivers/regulator/rt6190-regulator.c:374:\tret = regmap_write(regmap, RT6190_REG_OCPEN, 0);\ndrivers/regulator/rt6190-regulator.c-375-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c-378-\t/* Enable VBUSC ADC */\ndrivers/regulator/rt6190-regulator.c:379:\treturn regmap_write(regmap, RT6190_REG_VBUSC_ADC, 0x02);\ndrivers/regulator/rt6190-regulator.c-380-}\n--\ndrivers/regulator/rt6190-regulator.c=382=static int rt6190_probe(struct i2c_client *i2c)\n--\ndrivers/regulator/rt6190-regulator.c-400-\telse if (enable_gpio)\ndrivers/regulator/rt6190-regulator.c:401:\t\tusleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);\ndrivers/regulator/rt6190-regulator.c-402-\n--\ndrivers/regulator/rt6190-regulator.c-411-\ndrivers/regulator/rt6190-regulator.c:412:\tret = regmap_read(regmap, RT6190_REG_VID, \u0026vid);\ndrivers/regulator/rt6190-regulator.c-413-\tif (ret)\n--\ndrivers/regulator/rt6190-regulator.c=466=static int rt6190_runtime_resume(struct device *dev)\n--\ndrivers/regulator/rt6190-regulator.c-474-\tgpiod_set_value(data-\u003eenable_gpio, 1);\ndrivers/regulator/rt6190-regulator.c:475:\tusleep_range(RT6190_EN_TIME_US, RT6190_EN_TIME_US * 2);\ndrivers/regulator/rt6190-regulator.c-476-\n--\ndrivers/regulator/rt6190-regulator.c=500=module_i2c_driver(rt6190_driver);\ndrivers/regulator/rt6190-regulator.c-501-\ndrivers/regulator/rt6190-regulator.c:502:MODULE_DESCRIPTION(\"Richtek RT6190 regulator driver\");\ndrivers/regulator/rt6190-regulator.c-503-MODULE_AUTHOR(\"ChiYuan Huang \u003ccy_huang@richtek.com\u003e\");\n"
} |
| 17/2 | 2026/09/17 17:19 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 19494 output: 31 thoughts: 3029 Thoughts: **Analysis of Potential Fuzzability** Okay, let's break this down. First, I need to understand the change. The patch modifies `rt6190-regulator.c`, specifically the `rt6190_out_enable` function, adding an additional `regmap_update_bits` call and error handling. The core of this seems to be a power regulator driver for a Richtek RT6190 chip. I need to figure out if this is something syzkaller *can* realistically fuzz. My initial thought is to examine the `git diff` to understand what this patch changes. My first thought is to use `git show` with `grepper` but then I realize I've already got the diff. Now I'm focusing on reachability, per the triage guidelines. I need to determine if this driver is reachable in the standard QEMU/GCE environment that syzkaller uses. The driver is part of `drivers/regulator`, so I need to assess whether regulator drivers are generally fuzzed, or if they depend on hardware emulation. The driver utilizes I2C, as indicated by its `i2c_driver` structure and the `regmap_read/write` calls. I2C devices *can* be probed using `/sys/bus/i2c/devices/i2c-.../new_device`, or through i2c-dev ioctls, or they can be instantiated via Device Tree configuration. However, the driver's probe function (`rt6190_probe`) performs a check (`regmap_read`) to verify the correct device ID (`RICHTEK_VID`). This suggests that the driver won't probe correctly unless a real RT6190 chip, or a precise emulation, is present on the I2C bus. My current focus is to determine the architecture of the I2C interactions as they are the primary source for the code to be executed. Now, I'm thinking about how syzkaller interacts with drivers. Does it have any specific handling for I2C, or does it instantiate hardware? I need to know if syzkaller can probe an I2C device. I am now double-checking my assumptions and what I can do from userspace to interact with the device. Examining `rt6190_probe`, if a device is connected, the function also needs to be called. Furthermore, the `rt6190_out_enable` function would be called through the regulator framework. The regulators need to be connected through device tree or via userland calls, which seems unlikely. I need to confirm if the `regulator_enable_regmap` function can be reached as the patch has added error handling around those functions. I remember the triage guidelines mention that "structurally unreachable hardware" is a negative criterion. I need to be sure before I rule this out. I am re-reading the triage guidelines. I will check the wording: "Structurally unreachable hardware: * Vendor-specific PCIe switches, SmartNICs, or GPU drivers (e.g., mlxsw, pds_core, qed, ionic, amdgpu) requiring physical ASIC/PCIe cards not emulated in standard QEMU". "Reachable Drivers and Protocols: * Drivers accessible via virtual buses (virtio, USB gadget, loopback, netlink, binder, sockets, etc.)" This is the section I need to re-read. Is an I2C regulator chip like the RT6190 reachable in the standard virtualized environments (QEMU/GCE)? It is a dedicated power management IC, a PMIC regulator chip. My conclusion is that this is *unlikely* to be reachable. A Richtek RT6190 is a discrete hardware chip. Standard QEMU does *not* emulate this, and syzkaller does not appear to instantiate hardware in that way. I'm going to determine that this falls under the "structurally unreachable hardware" category. Therefore, this patch is *not* worth fuzzing and I will return `WorthFuzzing=false`. |
| 18/2 | 2026/09/17 17:20 | tool | grepper |
0mError:no matches Args: {
"Expression": "REGULATOR_RT6190",
"PathPrefix": "arch/"
}Results: {
"error": "no matches"
} |
| 19/2 | 2026/09/17 17:20 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 23438 output: 36 thoughts: 31 Thoughts: Here's my thought process, as requested: **Checking x86/amd64 Defconfigs for RT6190 Regulator Support** Okay, so I need to quickly determine if `CONFIG_REGULATOR_RT6190` is enabled in any of the x86 or amd64 defconfigs. This is a common situation - I need to see if a specific regulator is already supported within those architectures. Makes sense to start there, before I consider anything else. This tells me if someone has already done the legwork, or if I need to start from scratch. I’ll probably need to look through the relevant `defconfig` files – maybe search them directly, or use some scripts if they exist to automate this. The goal is to avoid duplicating effort and leverage any existing work, or, if not, to understand the current state before further analysis is undertaken. I'll need to examine both the x86 and amd64 branches, as they often share configuration but sometimes diverge. This process will take me no more than a few minutes. |
| 20/2 | 2026/09/17 17:20 | tool | grepper |
0mError:no matches Args: {
"Expression": "CONFIG_REGULATOR_RT6190",
"PathPrefix": "arch/x86"
}Results: {
"error": "no matches"
} |
| 21/2 | 2026/09/17 17:20 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 23743 output: 31 thoughts: 17 Thoughts: Here's my attempt at summarizing the thought process, tailored for an expert audience: **Investigating Architecture-Specific Codebases** Okay, so I need to dig into some architecture-specific code, likely to understand a particular behavior or debug an issue. My first instinct, as always, is to narrow down the search to the most relevant areas. Given the context, `arch/arm64` and `arch/arm` are the obvious candidates. These directories are the usual suspects. I'll start there, knowing that the specific target (AArch64 or ARM) dictates the initial focus, but they're the standard starting points for anything related to those processor families. The structure within those directories will then guide the next steps, based on the problem I'm trying to solve. |
| 22/2 | 2026/09/17 17:20 | tool | grepper |
0mError:no matches Args: {
"Expression": "REGULATOR_RT6190",
"PathPrefix": "arch/"
}Results: {
"error": "no matches"
} |
| 23/2 | 2026/09/17 17:20 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 23970 output: 27 thoughts: 30 Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience: **Debugging DTS Inclusion** Alright, so I'm dealing with this "rt6190" thing, and the first red flag is that it's *nowhere* to be found in the standard in-tree DTS files. That's unusual, and immediately raises some questions. I'm going to have to do some digging to understand where it's defined. My immediate next step is to initiate a focused search. Time to pull up the tool chain and look for any DTS files, whether upstream or in my custom patches, that might contain "rt6190". This search needs to be comprehensive, I need to check anything in any relevant path and configuration I can think of. I need to make sure I haven't just missed it, or have a typo or something simple. It is time to get digging. |
| 24/2 | 2026/09/17 17:20 | tool | grepper |
0mError:no matches Args: {
"Expression": "rt6190",
"PathPrefix": "arch/"
}Results: {
"error": "no matches"
} |
| 25/2 | 2026/09/17 17:20 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 24234 output: 27 thoughts: 24 Thoughts: Here's my summary, as though I'm thinking through this problem: **DTS Blues & the Devicetree Bindings** Okay, so I'm hitting a roadblock. It seems like the Device Tree Source (DTS) isn't even showing up in the expected architecture directory. That's a bit odd, usually they're pretty well organized. Alright, let's take a look at the `Documentation/devicetree/bindings` directory. That's where all the good stuff lives – the definitions for how devices should be represented in the Device Tree. Time to delve into those bindings and see if I can figure out what's going on. Let's see if I can find what I need there. |
| 26/2 | 2026/09/17 17:20 | tool | grepper |
0mArgs:{
"Expression": "rt6190",
"PathPrefix": "Documentation/"
}Results: {
"Output": "Documentation/devicetree/bindings/regulator/richtek,rt6190.yaml-3----\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml:4:$id: http://devicetree.org/schemas/regulator/richtek,rt6190.yaml#\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml-5-$schema: http://devicetree.org/meta-schemas/core.yaml#\n--\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml=26=properties:\n--\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml-28- enum:\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml:29: - richtek,rt6190\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml-30-\n--\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml=57=examples:\n--\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml-66- regulator@2c {\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml:67: compatible = \"richtek,rt6190\";\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml-68- reg = \u003c0x2c\u003e;\n--\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml-71- enable-gpios = \u003c\u0026gpio26 1 GPIO_ACTIVE_HIGH\u003e;\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml:72: regulator-name = \"richtek,rt6190-buckboost\";\nDocumentation/devicetree/bindings/regulator/richtek,rt6190.yaml-73- regulator-min-microvolt = \u003c3000000\u003e;\n"
} |
| 27/2 | 2026/09/17 17:20 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 24987 output: 116 thoughts: 455 Thoughts: **My Assessment of the RT6190 Regulator Driver Patch** Okay, let's break this down. I'm looking at a patch that touches the `rt6190_out_enable()` function within the `rt6190-regulator.c` driver. Specifically, it seems to modify error handling, adding a `goto err_pm_put` rather than a direct return, in several error paths. But, is this code even *reachable* for fuzzing? That's the critical question. Based on my understanding, this is a discrete hardware chip – the Richtek RT6190, a 4-Switch BuckBoost controller that communicates over I2C. This means it's an *external* I2C device. It's not something that's likely going to be simulated in a standard QEMU or Google Compute Engine virtual machine environment. It needs physical hardware, or a very specific device tree configuration with a physical IC responding to I2C transactions. Syzkaller, or any standard fuzzer on amd64 or a standard virtualized environment, is going to be useless in this case. This immediately flags it as structurally unreachable in a fuzzing context. I've seen this before. It aligns perfectly with the "Structurally unreachable hardware" category defined in the triage guidelines. This includes vendor-specific devices, such as PCIe switches or certain SmartNICs or GPU drivers that require specific physical ASICs or cards which aren't emulated. This RT6190 driver clearly falls into this category: a driver for a specific physical chip (a discrete I2C buck-boost PMIC) that lacks emulation in standard virtualized environments. So, the conclusion is clear: WorthFuzzing: `false`. No `EnableConfigs` are required. No particular `FocusSymbols` are relevant here. The reasoning is straightforward and aligns with the analysis: This patch modifies error handling in the `rt6190_out_enable()` function for the Richtek RT6190, an I2C buck-boost controller that can only be reached using physical hardware. Time for a final, quick review of everything to confirm that I've followed the triage instructions and guidelines accurately. All good to go. |
| 28/2 | 2026/09/17 17:20 | tool | set-results |
0mArgs:{
"EnableConfigs": [],
"FocusSymbols": [],
"Reasoning": "The patch modifies error path handling in rt6190_out_enable() for the Richtek RT6190 buck-boost controller driver (drivers/regulator/rt6190-regulator.c). This driver requires specific physical I2C hardware that is not emulated in standard virtualized environments (QEMU/GCE), making the modified code structurally unreachable for fuzzing.",
"WorthFuzzing": false
}Results: {
"EnableConfigs": null,
"FocusSymbols": [],
"Reasoning": "The patch modifies error path handling in rt6190_out_enable() for the Richtek RT6190 buck-boost controller driver (drivers/regulator/rt6190-regulator.c). This driver requires specific physical I2C hardware that is not emulated in standard virtualized environments (QEMU/GCE), making the modified code structurally unreachable for fuzzing.",
"WorthFuzzing": false
} |
| 29/1 | 2026/09/17 17:20 | action | If |
0mArgs:{
"WorthFuzzing": false
}Results: null |
| Total Calls | Total Tokens | Avg Tokens | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|
| Total Calls | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|