| Seq | Timestamp | Type | Name | Duration |
|---|---|---|---|---|
| 0/0 | 2026/10/13 17:33 | flow | patch-triage |
1mArgs:null Results: {
"EnableConfigs": [
"SCSI_AACRAID"
],
"FocusSymbols": [],
"KMSANReasoning": "",
"NeedsKMSAN": false,
"Reasoning": "The patch modifies sense buffer copying logic in `aac_srb_callback` and `hba_resp_task_complete` within the Adaptec AACRAID SCSI RAID controller driver (`drivers/scsi/aacraid/aachba.c`). This driver specifically targets physical Adaptec/Dell PERC PCI/PCIe RAID host bus adapters which are not emulated in standard virtualized fuzzing environments (QEMU/GCE). Because the driver requires non-emulated physical hardware to probe and execute, the modified code paths are structurally unreachable in syzkaller.",
"WorthFuzzing": false
} |
| 1/1 | 2026/10/13 17:33 | action | read-patch-diff |
0mArgs:null Results: {
"PatchDiff": "commit 9836a18a54fe911a2675dab94233d2e3dcbb017a\nAuthor: syz-cluster \u003ctriage@syzkaller.com\u003e\nDate: Tue Oct 13 17:33:45 2026 +0000\n\n syz-cluster: applied patch under review\n\ndiff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c\nindex df9492247631f..23512648e389e 100644\n--- a/drivers/scsi/aacraid/aachba.c\n+++ b/drivers/scsi/aacraid/aachba.c\n@@ -3418,7 +3418,7 @@ static void aac_srb_callback(void *context, struct fib * fibptr)\n \t\tpr_warn(\"aac_srb_callback: srb failed, status = %d\\n\",\n \t\t\t\tle32_to_cpu(srbreply-\u003estatus));\n \t\tlen = min_t(u32, le32_to_cpu(srbreply-\u003esense_data_size),\n-\t\t\t SCSI_SENSE_BUFFERSIZE);\n+\t\t\t sizeof(srbreply-\u003esense_data));\n \t\tscsicmd-\u003eresult = DID_ERROR \u003c\u003c 16 | SAM_STAT_CHECK_CONDITION;\n \t\tmemcpy(scsicmd-\u003esense_buffer,\n \t\t\t\tsrbreply-\u003esense_data, len);\n@@ -3544,7 +3544,7 @@ static void aac_srb_callback(void *context, struct fib * fibptr)\n \n \t\tscsicmd-\u003eresult |= SAM_STAT_CHECK_CONDITION;\n \t\tlen = min_t(u32, le32_to_cpu(srbreply-\u003esense_data_size),\n-\t\t\t SCSI_SENSE_BUFFERSIZE);\n+\t\t\t sizeof(srbreply-\u003esense_data));\n #ifdef AAC_DETAILED_STATUS_INFO\n \t\tpr_warn(\"aac_srb_callback: check condition, status = %d len=%d\\n\",\n \t\t\t\t\tle32_to_cpu(srbreply-\u003estatus), len);\n@@ -3579,7 +3579,7 @@ static void hba_resp_task_complete(struct aac_dev *dev,\n \t\tint len;\n \n \t\tlen = min_t(u8, err-\u003esense_response_data_len,\n-\t\t\tSCSI_SENSE_BUFFERSIZE);\n+\t\t\tsizeof(err-\u003esense_response_buf));\n \t\tif (len)\n \t\t\tmemcpy(scsicmd-\u003esense_buffer,\n \t\t\t\terr-\u003esense_response_buf, len);\n"
} |
| 2/1 | 2026/10/13 17:33 | agent | patch-evaluator |
1mModel:core Args: null Results: {
"EnableConfigs": [
"SCSI_AACRAID"
],
"FocusSymbols": [],
"Reasoning": "The patch modifies sense buffer copying logic in `aac_srb_callback` and `hba_resp_task_complete` within the Adaptec AACRAID SCSI RAID controller driver (`drivers/scsi/aacraid/aachba.c`). This driver specifically targets physical Adaptec/Dell PERC PCI/PCIe RAID host bus adapters which are not emulated in standard virtualized fuzzing environments (QEMU/GCE). Because the driver requires non-emulated physical hardware to probe and execute, the modified code paths are structurally unreachable in syzkaller.",
"WorthFuzzing": false
}Instruction: You are an expert Linux kernel maintainer and security engineer.
Your job is to review a provided patch series and evaluate whether it warrants fuzzing with syzkaller.
IMPORTANT: The changes have ALREADY been applied and committed as the HEAD commit in
your workspace. Do NOT rely on internal assumptions. You must actively use your code access
tools to inspect the actual source code, callers, and surrounding context.
================================================================================
1. CORE TRIAGE PHILOSOPHY
================================================================================
The goal of patch fuzzing is to discover crashes, regressions, exposed latent bugs,
and newly triggered assertions introduced by the patch series.
- REACHABILITY IS THE PRIMARY GATE:
Fuzzing can only discover bugs in code that can actually execute in standard virtualized
environments (GCE or QEMU, utilizing software-emulated devices like USB gadgets, netdev, tun/tap).
If the modified code is structurally unreachable (see Section 2), it MUST NOT be fuzzed,
regardless of whether it adds assertions or complex logic.
- DO NOT BLINDLY TRUST "NO FUNCTIONAL CHANGE" (NFCI) OR "REFACTORING" CLAIMS:
Patch authors routinely label changes as "cleanups", "refactorings", or state
"No functional change intended". Do NOT take these claims at face value.
Code refactorings that rearrange logic, introduce helper functions, or alter state management
in core subsystems frequently introduce subtle semantic shifts or uncover latent kernel bugs.
If reachable executable code is modified or refactored, it MUST be fuzzed.
- NEW OR MODIFIED ASSERTIONS IN REACHABLE CODE MUST BE FUZZED:
When a patch introduces or modifies runtime checks or assertions (e.g., WARN_ON*, VM_WARN_ON*,
BUG_ON*, lockdep_assert*) in reachable code paths, it enforces new or stricter invariants.
Even if the author believes the invariant always holds, fuzzing is essential to verify whether
an unusual sequence of operations can violate it.
================================================================================
2. WHEN TO RETURN WorthFuzzing=false (NEGATIVE CRITERIA)
================================================================================
Return WorthFuzzing=false ONLY IF all modified code falls strictly into one or more of these categories:
- Non-kernel and non-executable changes:
* Modifications to Documentation/, comments, or spelling fixes.
* User-space directories, self-tests, samples, or scripts (e.g., tools/, samples/, scripts/, usr/)
that do not affect the compiled kernel image (vmlinux) or kernel modules.
* Purely decorative logging (e.g., message strings in pr_err, printk, dev_info) or tracepoints
that do not alter control flow or data structures.
* Build system or Kconfig changes that do not alter compiled C logic.
- Structurally unreachable hardware:
* Vendor-specific PCIe switches, SmartNICs, or GPU drivers (e.g., mlxsw, pds_core, qed,
ionic, amdgpu) requiring physical ASIC/PCIe cards not emulated in standard QEMU.
- Unreachable execution paths:
* Driver teardown callbacks (.remove, .shutdown, pci_unregister_driver) executed only during
physical PCI hot-unplug or manual sysfs driver unbinding.
* Code paths exclusive to architectures other than the target architecture.
================================================================================
3. WHEN TO RETURN WorthFuzzing=true (POSITIVE CRITERIA)
================================================================================
Return WorthFuzzing=true whenever the patch touches reachable executable code, including:
- Core Subsystems:
* Any logic modifications in memory management (mm/), synchronization/locking (kernel/locking/),
BPF, scheduler, core networking, VFS, or syscall handling.
- Refactorings and Code Cleanups:
* Any restructuring of reachable data structures, helper abstractions, or algorithm flows.
- Runtime Assertions and Defensive Checks:
* Any introduction or alteration of assertions (WARN_ON*, VM_WARN_ON*, BUG_ON*, etc.) in reachable paths.
- Reachable Drivers and Protocols:
* Drivers accessible via virtual buses (virtio, USB gadget, loopback, netlink, binder, sockets, etc.).
================================================================================
4. EXTRACTING FocusSymbols (PREVENTING DILUTION)
================================================================================
When WorthFuzzing=true, you must extract specific kernel functions into FocusSymbols to guide the fuzzer:
- AVOID UBIQUITOUS LIFECYCLE HOT-PATHS:
Do NOT list generic, ubiquitous functions called by almost every program in the corpus
(including, but not limited to: general memory allocators and deallocators, page fault
and trap handlers, or core synchronization primitives; this is not an exhaustive list).
Listing ubiquitous functions causes the fuzzer to classify thousands of unrelated tests as "focused",
which severely dilutes fuzzing effort away from the actual changes.
- TARGET SPECIFIC FEATURE LOGIC AND ENTRYPOINTS:
List functions that specifically implement the logic being added or altered, or direct API entrypoints
for the subsystem feature under review.
- HANDLING STATIC INLINE FUNCTIONS IN HEADERS (.h):
Compiler-inlined static functions (such as static inlines in mm/*.h or include/linux/*.h) lack
distinct symbol addresses in vmlinux and cannot be targeted directly by symbol coverage filters.
If the changes are primarily in static inline helpers, identify non-static, feature-specific caller
functions in .c files that exercise them (avoiding ubiquitous lifecycle wrappers).
================================================================================
5. IDENTIFYING EnableConfigs
================================================================================
Identify any specific CONFIG_ options required to properly compile and reach the modified code:
- Inspect Kconfig files and #ifdef guards; do not make assumptions.
- Check "depends on" lines in Kconfig to include any non-standard parent subsystem configs needed.
- Strip any 'CONFIG_' prefix (e.g., return "NET_IPV4" instead of "CONFIG_NET_IPV4").
Prefer calling several tools at the same time to save round-trips.
Use set-results tool to provide results of the analysis.
It must be called exactly once before the final reply.
Ignore results of this tool.
Prompt: Target architecture: amd64
For your convenience, here is the diff of the changes:
commit 9836a18a54fe911a2675dab94233d2e3dcbb017a
Author: syz-cluster <triage@syzkaller.com>
Date: Tue Oct 13 17:33:45 2026 +0000
syz-cluster: applied patch under review
diff --git a/drivers/scsi/aacraid/aachba.c b/drivers/scsi/aacraid/aachba.c
index df9492247631f..23512648e389e 100644
--- a/drivers/scsi/aacraid/aachba.c
+++ b/drivers/scsi/aacraid/aachba.c
@@ -3418,7 +3418,7 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
pr_warn("aac_srb_callback: srb failed, status = %d\n",
le32_to_cpu(srbreply->status));
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
- SCSI_SENSE_BUFFERSIZE);
+ sizeof(srbreply->sense_data));
scsicmd->result = DID_ERROR << 16 | SAM_STAT_CHECK_CONDITION;
memcpy(scsicmd->sense_buffer,
srbreply->sense_data, len);
@@ -3544,7 +3544,7 @@ static void aac_srb_callback(void *context, struct fib * fibptr)
scsicmd->result |= SAM_STAT_CHECK_CONDITION;
len = min_t(u32, le32_to_cpu(srbreply->sense_data_size),
- SCSI_SENSE_BUFFERSIZE);
+ sizeof(srbreply->sense_data));
#ifdef AAC_DETAILED_STATUS_INFO
pr_warn("aac_srb_callback: check condition, status = %d len=%d\n",
le32_to_cpu(srbreply->status), len);
@@ -3579,7 +3579,7 @@ static void hba_resp_task_complete(struct aac_dev *dev,
int len;
len = min_t(u8, err->sense_response_data_len,
- SCSI_SENSE_BUFFERSIZE);
+ sizeof(err->sense_response_buf));
if (len)
memcpy(scsicmd->sense_buffer,
err->sense_response_buf, len);
|
| 3/2 | 2026/10/13 17:33 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 3386 output: 30 thoughts: 207 Thoughts: **Analyzing a Kernel Patch in `drivers/scsi/aacraid/aachba.c`** Okay, so I've been asked to evaluate a patch, specifically targeting `drivers/scsi/aacraid/aachba.c`. My first move? Dive right into that patch and see what's changed. Looks like it's touching `aac_srb_callback` and `hba_resp_task_complete`. Interesting... the key change seems to be replacing `SCSI_SENSE_BUFFERSIZE` with `sizeof(srbreply->sense_data)` and `sizeof(err->sense_response_buf)`. That's a classic size-related fix, likely intended to handle sense data more robustly. My initial thought is it's a good move, but I need more context to be sure. Hang on... what *is* `aacraid`? Ah, Adaptec AACRAID SCSI RAID driver. Right, so we're dealing with a specific hardware driver. That narrows things down considerably. Adaptec... right, that's PCI, more often physically reachable, or at least easily emulated. I'm going to want to confirm it's a real driver, not a stub or something emulated, and if syzkaller can reach it. Time for some quick greps and checks within the `drivers/scsi/aacraid/` directory. Gotta get a feel for the supported hardware, how it's connected, and if there are any known areas of vulnerability or recent activity in that area. Gotta see if this relates to a specific controller family, or if it's more generic. This seems like a potentially important fix, and I need to establish its context and scope before I can give a solid evaluation. |
| 4/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "aacraid",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "\nFull output is too long, showing 200 out of 524 lines.\nUse more precise expression or PathPrefixes if possible.\n\nNumber of matching lines per file (13 files in total):\ndrivers/scsi/aacraid/Makefile:3\ndrivers/scsi/aacraid/aachba.c:17\ndrivers/scsi/aacraid/aacraid.h:6\ndrivers/scsi/aacraid/commctrl.c:28\ndrivers/scsi/aacraid/comminit.c:12\ndrivers/scsi/aacraid/commsup.c:10\ndrivers/scsi/aacraid/dpcsup.c:5\ndrivers/scsi/aacraid/linit.c:66\ndrivers/scsi/aacraid/nark.c:5\ndrivers/scsi/aacraid/rkt.c:5\ndrivers/scsi/aacraid/rx.c:6\ndrivers/scsi/aacraid/sa.c:6\ndrivers/scsi/aacraid/src.c:6\n\ndrivers/scsi/aacraid/Makefile-1-# SPDX-License-Identifier: GPL-2.0-only\ndrivers/scsi/aacraid/Makefile:2:# Adaptec aacraid\ndrivers/scsi/aacraid/Makefile-3-\ndrivers/scsi/aacraid/Makefile:4:obj-$(CONFIG_SCSI_AACRAID) := aacraid.o\ndrivers/scsi/aacraid/Makefile-5-\ndrivers/scsi/aacraid/Makefile:6:aacraid-objs\t:= linit.o aachba.o commctrl.o comminit.o commsup.o \\\ndrivers/scsi/aacraid/Makefile-7-\t\t dpcsup.o rx.o sa.o rkt.o nark.o src.o\n--\ndrivers/scsi/aacraid/aachba.c-5- *\ndrivers/scsi/aacraid/aachba.c:6: * based on the old aacraid driver that is..\ndrivers/scsi/aacraid/aachba.c:7: * Adaptec aacraid device driver for Linux.\ndrivers/scsi/aacraid/aachba.c-8- *\ndrivers/scsi/aacraid/aachba.c-9- * Copyright (c) 2000-2010 Adaptec, Inc.\ndrivers/scsi/aacraid/aachba.c:10: * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)\ndrivers/scsi/aacraid/aachba.c:11: *\t\t 2016-2017 Microsemi Corp. (aacraid@microsemi.com)\ndrivers/scsi/aacraid/aachba.c-12- *\n--\ndrivers/scsi/aacraid/aachba.c-36-\ndrivers/scsi/aacraid/aachba.c:37:#include \"aacraid.h\"\ndrivers/scsi/aacraid/aachba.c-38-\n--\ndrivers/scsi/aacraid/aachba.c=1203=static int aac_bounds_32(struct aac_dev * dev, struct scsi_cmnd * cmd, u64 lba)\n--\ndrivers/scsi/aacraid/aachba.c-1206-\t\tint cid = scmd_id(cmd);\ndrivers/scsi/aacraid/aachba.c:1207:\t\tdprintk((KERN_DEBUG \"aacraid: Illegal lba\\n\"));\ndrivers/scsi/aacraid/aachba.c-1208-\t\tcmd-\u003eresult = DID_OK \u003c\u003c 16 | SAM_STAT_CHECK_CONDITION;\n--\ndrivers/scsi/aacraid/aachba.c=2411=static int aac_read(struct scsi_cmnd * scsicmd)\n--\ndrivers/scsi/aacraid/aachba.c-2470-\t\tcid = scmd_id(scsicmd);\ndrivers/scsi/aacraid/aachba.c:2471:\t\tdprintk((KERN_DEBUG \"aacraid: Illegal lba\\n\"));\ndrivers/scsi/aacraid/aachba.c-2472-\t\tscsicmd-\u003eresult = DID_OK \u003c\u003c 16 | SAM_STAT_CHECK_CONDITION;\n--\ndrivers/scsi/aacraid/aachba.c=2511=static int aac_write(struct scsi_cmnd * scsicmd)\n--\ndrivers/scsi/aacraid/aachba.c-2561-\t\tcid = scmd_id(scsicmd);\ndrivers/scsi/aacraid/aachba.c:2562:\t\tdprintk((KERN_DEBUG \"aacraid: Illegal lba\\n\"));\ndrivers/scsi/aacraid/aachba.c-2563-\t\tscsicmd-\u003eresult = DID_OK \u003c\u003c 16 | SAM_STAT_CHECK_CONDITION;\n--\ndrivers/scsi/aacraid/aachba.c=2707=static int aac_start_stop(struct scsi_cmnd *scsicmd)\n--\ndrivers/scsi/aacraid/aachba.c-2769- *\tEmulate a SCSI command and queue the required request for the\ndrivers/scsi/aacraid/aachba.c:2770: *\taacraid firmware.\ndrivers/scsi/aacraid/aachba.c-2771- */\n--\ndrivers/scsi/aacraid/aachba.c=3375=static void aac_srb_callback(void *context, struct fib * fibptr)\n--\ndrivers/scsi/aacraid/aachba.c-3447-\t\t\t\t\t\t\u003c scsicmd-\u003eunderflow)\ndrivers/scsi/aacraid/aachba.c:3448:\t\t\t\tpr_warn(\"aacraid: SCSI CMD underflow\\n\");\ndrivers/scsi/aacraid/aachba.c-3449-\t\t\telse\ndrivers/scsi/aacraid/aachba.c:3450:\t\t\t\tpr_warn(\"aacraid: SCSI CMD Data Overrun\\n\");\ndrivers/scsi/aacraid/aachba.c-3451-\t\t\tscsicmd-\u003eresult = DID_ERROR \u003c\u003c 16;\n--\ndrivers/scsi/aacraid/aachba.c-3513-#ifdef AAC_DETAILED_STATUS_INFO\ndrivers/scsi/aacraid/aachba.c:3514:\t\tpr_info(\"aacraid: SRB ERROR(%u) %s scsi cmd 0x%x -scsi status 0x%x\\n\",\ndrivers/scsi/aacraid/aachba.c-3515-\t\t\tle32_to_cpu(srbreply-\u003esrb_status) \u0026 0x3F,\n--\ndrivers/scsi/aacraid/aachba.c=3792=static long aac_build_sg(struct scsi_cmnd *scsicmd, struct sgmap *psg)\n--\ndrivers/scsi/aacraid/aachba.c-3823-\tif (scsicmd-\u003eunderflow \u0026\u0026 (byte_count \u003c scsicmd-\u003eunderflow)) {\ndrivers/scsi/aacraid/aachba.c:3824:\t\tprintk(KERN_WARNING\"aacraid: cmd len %08lX cmd underflow %08X\\n\",\ndrivers/scsi/aacraid/aachba.c-3825-\t\t byte_count, scsicmd-\u003eunderflow);\n--\ndrivers/scsi/aacraid/aachba.c=3832=static long aac_build_sg64(struct scsi_cmnd *scsicmd, struct sgmap64 *psg)\n--\ndrivers/scsi/aacraid/aachba.c-3867-\tif (scsicmd-\u003eunderflow \u0026\u0026 (byte_count \u003c scsicmd-\u003eunderflow)) {\ndrivers/scsi/aacraid/aachba.c:3868:\t\tprintk(KERN_WARNING\"aacraid: cmd len %08lX cmd underflow %08X\\n\",\ndrivers/scsi/aacraid/aachba.c-3869-\t\t byte_count, scsicmd-\u003eunderflow);\n--\ndrivers/scsi/aacraid/aachba.c=3875=static long aac_build_sgraw(struct scsi_cmnd *scsicmd, struct sgmapraw *psg)\n--\ndrivers/scsi/aacraid/aachba.c-3915-\tif (scsicmd-\u003eunderflow \u0026\u0026 (byte_count \u003c scsicmd-\u003eunderflow)) {\ndrivers/scsi/aacraid/aachba.c:3916:\t\tprintk(KERN_WARNING\"aacraid: cmd len %08lX cmd underflow %08X\\n\",\ndrivers/scsi/aacraid/aachba.c-3917-\t\t byte_count, scsicmd-\u003eunderflow);\n--\ndrivers/scsi/aacraid/aachba.c=3923=static long aac_build_sgraw2(struct scsi_cmnd *scsicmd,\n--\ndrivers/scsi/aacraid/aachba.c-3996-\tif (scsicmd-\u003eunderflow \u0026\u0026 (byte_count \u003c scsicmd-\u003eunderflow)) {\ndrivers/scsi/aacraid/aachba.c:3997:\t\tprintk(KERN_WARNING\"aacraid: cmd len %08lX cmd underflow %08X\\n\",\ndrivers/scsi/aacraid/aachba.c-3998-\t\t byte_count, scsicmd-\u003eunderflow);\n--\ndrivers/scsi/aacraid/aachba.c=4039=static long aac_build_sghba(struct scsi_cmnd *scsicmd,\n--\ndrivers/scsi/aacraid/aachba.c-4100-\tif (scsicmd-\u003eunderflow \u0026\u0026 (byte_count \u003c scsicmd-\u003eunderflow)) {\ndrivers/scsi/aacraid/aachba.c:4101:\t\tpr_warn(\"aacraid: cmd len %08lX cmd underflow %08X\\n\",\ndrivers/scsi/aacraid/aachba.c-4102-\t\t\t\tbyte_count, scsicmd-\u003eunderflow);\n--\ndrivers/scsi/aacraid/aacraid.h-5- *\ndrivers/scsi/aacraid/aacraid.h:6: * based on the old aacraid driver that is..\ndrivers/scsi/aacraid/aacraid.h:7: * Adaptec aacraid device driver for Linux.\ndrivers/scsi/aacraid/aacraid.h-8- *\ndrivers/scsi/aacraid/aacraid.h-9- * Copyright (c) 2000-2010 Adaptec, Inc.\ndrivers/scsi/aacraid/aacraid.h:10: * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)\ndrivers/scsi/aacraid/aacraid.h:11: *\t\t 2016-2017 Microsemi Corp. (aacraid@microsemi.com)\ndrivers/scsi/aacraid/aacraid.h-12- *\ndrivers/scsi/aacraid/aacraid.h-13- * Module Name:\ndrivers/scsi/aacraid/aacraid.h:14: * aacraid.h\ndrivers/scsi/aacraid/aacraid.h-15- *\ndrivers/scsi/aacraid/aacraid.h:16: * Abstract: Contains all routines for control of the aacraid driver\ndrivers/scsi/aacraid/aacraid.h-17- */\n--\ndrivers/scsi/aacraid/commctrl.c-5- *\ndrivers/scsi/aacraid/commctrl.c:6: * based on the old aacraid driver that is..\ndrivers/scsi/aacraid/commctrl.c:7: * Adaptec aacraid device driver for Linux.\ndrivers/scsi/aacraid/commctrl.c-8- *\ndrivers/scsi/aacraid/commctrl.c-9- * Copyright (c) 2000-2010 Adaptec, Inc.\ndrivers/scsi/aacraid/commctrl.c:10: * 2010-2015 PMC-Sierra, Inc. (aacraid@pmc-sierra.com)\ndrivers/scsi/aacraid/commctrl.c:11: *\t\t 2016-2017 Microsemi Corp. (aacraid@microsemi.com)\ndrivers/scsi/aacraid/commctrl.c-12- *\n--\ndrivers/scsi/aacraid/commctrl.c-33-\ndrivers/scsi/aacraid/commctrl.c:34:#include \"aacraid.h\"\ndrivers/scsi/aacraid/commctrl.c-35-\n--\ndrivers/scsi/aacraid/commctrl.c=244=static int next_getadapter_fib(struct aac_dev * dev, void __user *arg)\n--\ndrivers/scsi/aacraid/commctrl.c-327-\t\tspin_unlock_irqrestore(\u0026dev-\u003efib_lock, flags);\ndrivers/scsi/aacraid/commctrl.c:328:\t\t/* If someone killed the AIF aacraid thread, restart it */\ndrivers/scsi/aacraid/commctrl.c-329-\t\tstatus = !dev-\u003eaif_thread;\n--\ndrivers/scsi/aacraid/commctrl.c=479=static int aac_send_raw_srb(struct aac_dev* dev, void __user * arg)\n--\ndrivers/scsi/aacraid/commctrl.c-504-\tif (dev-\u003ein_reset) {\ndrivers/scsi/aacraid/commctrl.c:505:\t\tdprintk((KERN_DEBUG\"aacraid: send raw srb -EBUSY\\n\"));\ndrivers/scsi/aacraid/commctrl.c-506-\t\treturn -EBUSY;\n--\ndrivers/scsi/aacraid/commctrl.c-508-\tif (!capable(CAP_SYS_ADMIN)){\ndrivers/scsi/aacraid/commctrl.c:509:\t\tdprintk((KERN_DEBUG\"aacraid: No permission to send raw srb\\n\"));\ndrivers/scsi/aacraid/commctrl.c-510-\t\treturn -EPERM;\n--\ndrivers/scsi/aacraid/commctrl.c-520-\tif(copy_from_user(\u0026fibsize, \u0026user_srb-\u003ecount,sizeof(u32))){\ndrivers/scsi/aacraid/commctrl.c:521:\t\tdprintk((KERN_DEBUG\"aacraid: Could not copy data size from user\\n\"));\ndrivers/scsi/aacraid/commctrl.c-522-\t\trcode = -EFAULT;\n--\ndrivers/scsi/aacraid/commctrl.c-553-\tif (user_srbcmd-\u003esg.count \u003e ARRAY_SIZE(sg_list)) {\ndrivers/scsi/aacraid/commctrl.c:554:\t\tdprintk((KERN_DEBUG\"aacraid: too many sg entries %d\\n\",\ndrivers/scsi/aacraid/commctrl.c-555-\t\t\tuser_srbcmd-\u003esg.count));\n--\ndrivers/scsi/aacraid/commctrl.c-559-\tif ((data_dir == DMA_NONE) \u0026\u0026 user_srbcmd-\u003esg.count) {\ndrivers/scsi/aacraid/commctrl.c:560:\t\tdprintk((KERN_DEBUG\"aacraid:SG with no direction specified\\n\"));\ndrivers/scsi/aacraid/commctrl.c-561-\t\trcode = -EINVAL;\n--\ndrivers/scsi/aacraid/commctrl.c-569-\tif ((actual_fibsize != fibsize) \u0026\u0026 (actual_fibsize64 != fibsize)) {\ndrivers/scsi/aacraid/commctrl.c:570:\t\tdprintk((KERN_DEBUG\"aacraid: Bad Size specified in \"\ndrivers/scsi/aacraid/commctrl.c-571-\t\t \"Raw SRB command calculated fibsize=%lu;%lu \"\n--\ndrivers/scsi/aacraid/commctrl.c-659-\t\t\t\t(dev-\u003escsi_host_ptr-\u003emax_sectors \u003c\u003c 9)) {\ndrivers/scsi/aacraid/commctrl.c:660:\t\t\t\tpr_err(\"aacraid: upsg-\u003esg[%d].count=%u\u003e%u\\n\",\ndrivers/scsi/aacraid/commctrl.c-661-\t\t\t\t\ti, sg_count[i],\n--\ndrivers/scsi/aacraid/commctrl.c-733-\t\t\t\tif(!p) {\ndrivers/scsi/aacraid/commctrl.c:734:\t\t\t\t\tdprintk((KERN_DEBUG\"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\\n\",\ndrivers/scsi/aacraid/commctrl.c-735-\t\t\t\t\t sg_count[i], i, upsg-\u003ecount));\n--\ndrivers/scsi/aacraid/commctrl.c-747-\t\t\t\t\t\tsg_count[i])){\ndrivers/scsi/aacraid/commctrl.c:748:\t\t\t\t\t\tdprintk((KERN_DEBUG\"aacraid: Could not copy sg data from user\\n\"));\ndrivers/scsi/aacraid/commctrl.c-749-\t\t\t\t\t\trcode = -EFAULT;\n--\ndrivers/scsi/aacraid/commctrl.c-766-\t\t\tif (!usg) {\ndrivers/scsi/aacraid/commctrl.c:767:\t\t\t\tdprintk((KERN_DEBUG\"aacraid: Allocation error in Raw SRB command\\n\"));\ndrivers/scsi/aacraid/commctrl.c-768-\t\t\t\trcode = -ENOMEM;\n--\ndrivers/scsi/aacraid/commctrl.c-789-\t\t\t\tif(!p) {\ndrivers/scsi/aacraid/commctrl.c:790:\t\t\t\t\tdprintk((KERN_DEBUG \"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\\n\",\ndrivers/scsi/aacraid/commctrl.c-791-\t\t\t\t\t\tsg_count[i], i, usg-\u003ecount));\n--\ndrivers/scsi/aacraid/commctrl.c-803-\t\t\t\t\t\tkfree (usg);\ndrivers/scsi/aacraid/commctrl.c:804:\t\t\t\t\t\tdprintk((KERN_DEBUG\"aacraid: Could not copy sg data from user\\n\"));\ndrivers/scsi/aacraid/commctrl.c-805-\t\t\t\t\t\trcode = -EFAULT;\n--\ndrivers/scsi/aacraid/commctrl.c-845-\t\t\t\tif (!p) {\ndrivers/scsi/aacraid/commctrl.c:846:\t\t\t\t\tdprintk((KERN_DEBUG\"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\\n\",\ndrivers/scsi/aacraid/commctrl.c-847-\t\t\t\t\t\tsg_count[i], i, usg-\u003ecount));\n--\ndrivers/scsi/aacraid/commctrl.c-859-\t\t\t\t\t\tsg_count[i])){\ndrivers/scsi/aacraid/commctrl.c:860:\t\t\t\t\t\tdprintk((KERN_DEBUG\"aacraid: Could not copy sg data from user\\n\"));\ndrivers/scsi/aacraid/commctrl.c-861-\t\t\t\t\t\trcode = -EFAULT;\n--\ndrivers/scsi/aacraid/commctrl.c-888-\t\t\t\tif (!p) {\ndrivers/scsi/aacraid/commctrl.c:889:\t\t\t\t\tdprintk((KERN_DEBUG\"aacraid: Could not allocate SG buffer - size = %d buffer number %d of %d\\n\",\ndrivers/scsi/aacraid/commctrl.c-890-\t\t\t\t\t sg_count[i], i, upsg-\u003ecount));\n--\ndrivers/scsi/aacraid/commctrl.c-900-\t\t\t\t\t\tsg_count[i])) {\ndrivers/scsi/aacraid/commctrl.c:901:\t\t\t\t\t\tdprintk((KERN_DEBUG\"aacraid: Could not copy sg data from user\\n\"));\ndrivers/scsi/aacraid/commctrl.c-902-\t\t\t\t\t\trcode = -EFAULT;\n--\ndrivers/scsi/aacraid/commctrl.c-927-\tif (status != 0) {\ndrivers/scsi/aacraid/commctrl.c:928:\t\tdprintk((KERN_DEBUG\"aacraid: Could not send raw srb fib to hba\\n\"));\ndrivers/scsi/aacraid/commctrl.c-929-\t\trcode = -ENXIO;\n--\ndrivers/scsi/aacraid/commctrl.c-935-\t\t\tif (copy_to_user(sg_user[i], sg_list[i], sg_count[i])) {\ndrivers/scsi/aacraid/commctrl.c:936:\t\t\t\tdprintk((KERN_DEBUG\"aacraid: Could not copy sg data to user\\n\"));\ndrivers/scsi/aacraid/commctrl.c-937-\t\t\t\trcode = -EFAULT;\n--\ndrivers/scsi/aacraid/commctrl.c-969-\t\t\tsizeof(struct aac_srb_reply))) {\ndrivers/scsi/aacraid/commctrl.c:970:\t\t\tdprintk((KERN_DEBUG\"aacraid: Copy to user failed\\n\"));\ndrivers/scsi/aacraid/commctrl.c-971-\t\t\trcode = -EFAULT;\n--\ndrivers/scsi/aacraid/commctrl.c-979-\t\t\tsizeof(struct aac_srb_reply))) {\ndrivers/scsi/aacraid/commctrl.c:980:\t\t\tdprintk((KERN_DEBUG\"aacraid: Copy to user failed\\n\"));\n\n"
} |
| 5/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 9348 output: 34 thoughts: 46 Thoughts: Okay, let's dive into this. Here's how I'd approach understanding the aacraid device registration and any virtual or emulated support it might offer: **Investigating aacraid Device Registration and Emulation** My first instinct is to understand exactly *how* aacraid devices are being brought into the system. Where's the entry point? To start, I need to know how the driver is being registered. Specifically, I'm going to look for the function `pci_register_driver` within the driver's code base. I'll focus my search within the `drivers/scsi/aacraid/` directory. That's where I expect to find the core driver logic for this SCSI adapter. By finding where `pci_register_driver` is called, I can determine the PCI device IDs the driver is intended to support, and how the kernel handles the initial probing. Once I locate that point, I can better assess the device enumeration and understand any potential for virtual or emulated aacraid instances. From there, I can determine if any special initialization is performed, which would be crucial to look into if emulation is involved. This is where I can start looking for details on virtual device registration or any code that specifically handles emulated hardware. |
| 6/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "pci_register_driver",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "drivers/scsi/aacraid/linit.c=2049=static int __init aac_init(void)\n--\ndrivers/scsi/aacraid/linit.c-2055-\ndrivers/scsi/aacraid/linit.c:2056:\terror = pci_register_driver(\u0026aac_pci_driver);\ndrivers/scsi/aacraid/linit.c-2057-\tif (error \u003c 0)\n"
} |
| 7/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 9822 output: 34 thoughts: 27 Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience: **Diving into the AACRAID Driver Initialization** Alright, time to get my hands dirty. I'm thinking I need to investigate the `aac_pci_driver` and how it's initialized. Specifically, I'm heading straight for `drivers/scsi/aacraid/linit.c`. That's usually where the core PCI driver registration and initialization logic resides within the AACRAID codebase. I'm expecting to find the driver probe function, likely `aac_pci_probe`, which will handle device detection and resource allocation. I'll need to refresh my memory on the AACRAID's specific device identifiers and how it handles the quirks of different controller revisions. I'm also anticipating checking the `MODULE_DEVICE_TABLE` to see how the driver declares its supported hardware IDs. Understanding the initialization sequence is key to understanding any potential issues related to device enumeration, resource conflicts, or even early firmware loading problems. Time to dig in and see what's what. |
| 8/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "aac_pci_driver",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "drivers/scsi/aacraid/linit.c=2037=static SIMPLE_DEV_PM_OPS(aac_pm_ops, aac_suspend, aac_resume);\ndrivers/scsi/aacraid/linit.c-2038-\ndrivers/scsi/aacraid/linit.c:2039:static struct pci_driver aac_pci_driver = {\ndrivers/scsi/aacraid/linit.c-2040-\t.name\t\t= AAC_DRIVERNAME,\n--\ndrivers/scsi/aacraid/linit.c=2049=static int __init aac_init(void)\n--\ndrivers/scsi/aacraid/linit.c-2055-\ndrivers/scsi/aacraid/linit.c:2056:\terror = pci_register_driver(\u0026aac_pci_driver);\ndrivers/scsi/aacraid/linit.c-2057-\tif (error \u003c 0)\n--\ndrivers/scsi/aacraid/linit.c=2066=static void __exit aac_exit(void)\n--\ndrivers/scsi/aacraid/linit.c-2069-\t\tunregister_chrdev(aac_cfg_major, \"aac\");\ndrivers/scsi/aacraid/linit.c:2070:\tpci_unregister_driver(\u0026aac_pci_driver);\ndrivers/scsi/aacraid/linit.c-2071-}\n"
} |
| 9/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 10486 output: 41 thoughts: 27 Thoughts: Okay, let's dive into this. Here's how I'd approach that, summarized in the first person: **Analyzing PCI ID Support in `linit.c`** Right, so we need to figure out what PCI IDs are supported by the `aac_pci_driver` in the `linit.c` file. My initial thought is to go straight to the source. The most straightforward path is to check that specific source file and focus on the section where the `aac_pci_driver` is defined or referenced. I'll need to look for a list or table that defines the PCI device identifiers. This would likely be an array or structure that maps vendor and device IDs to the driver. This is the place to start. Let's see what we can find. I expect to be looking for either a static array of `pci_device_id` structures, or something similar. |
| 10/2 | 2026/10/13 17:34 | tool | read-file |
0mArgs:{
"File": "drivers/scsi/aacraid/linit.c",
"FirstLine": 2000,
"LineCount": 50
}Results: {
"Contents": "2000:\t\n2001:\t\t\tdev_err(\u0026pdev-\u003edev, \"aacraid: ioremap failed\\n\");\n2002:\t\t\t/* remap failed, go back ... */\n2003:\t\t\taac-\u003ecomm_interface = AAC_COMM_PRODUCER;\n2004:\t\t\tif (aac_adapter_ioremap(aac, AAC_MIN_FOOTPRINT_SIZE)) {\n2005:\t\t\t\tdev_warn(\u0026pdev-\u003edev,\n2006:\t\t\t\t\t\"aacraid: unable to map adapter.\\n\");\n2007:\t\n2008:\t\t\t\treturn;\n2009:\t\t\t}\n2010:\t\t}\n2011:\t\n2012:\t\tmsleep(10000);\n2013:\t\n2014:\t\taac_acquire_resources(aac);\n2015:\t\n2016:\t\t/*\n2017:\t\t * reset this flag to unblock ioctl() as it was set\n2018:\t\t * at aac_send_shutdown() to block ioctls from upperlayer\n2019:\t\t */\n2020:\t\taac-\u003eadapter_shutdown = 0;\n2021:\t\taac-\u003ehandle_pci_error = 0;\n2022:\t\n2023:\t\tscsi_host_unblock(shost, SDEV_RUNNING);\n2024:\t\taac_scan_host(aac);\n2025:\t\tpci_save_state(pdev);\n2026:\t\n2027:\t\tdev_err(\u0026pdev-\u003edev, \"aacraid: PCI error - resume\\n\");\n2028:\t}\n2029:\t\n2030:\tstatic const struct pci_error_handlers aac_pci_err_handler = {\n2031:\t\t.error_detected\t\t= aac_pci_error_detected,\n2032:\t\t.mmio_enabled\t\t= aac_pci_mmio_enabled,\n2033:\t\t.slot_reset\t\t= aac_pci_slot_reset,\n2034:\t\t.resume\t\t\t= aac_pci_resume,\n2035:\t};\n2036:\t\n2037:\tstatic SIMPLE_DEV_PM_OPS(aac_pm_ops, aac_suspend, aac_resume);\n2038:\t\n2039:\tstatic struct pci_driver aac_pci_driver = {\n2040:\t\t.name\t\t= AAC_DRIVERNAME,\n2041:\t\t.id_table\t= aac_pci_tbl,\n2042:\t\t.probe\t\t= aac_probe_one,\n2043:\t\t.remove\t\t= aac_remove_one,\n2044:\t\t.driver.pm = \u0026aac_pm_ops,\n2045:\t\t.shutdown\t= aac_shutdown,\n2046:\t\t.err_handler = \u0026aac_pci_err_handler,\n2047:\t};\n2048:\t\n2049:\tstatic int __init aac_init(void)\n"
} |
| 11/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 11544 output: 32 thoughts: 234 Thoughts: **QEMU and Adaptec AACRAID: A Quick Investigation** Okay, so I'm wondering about QEMU's SCSI controller support and whether it extends to emulating an Adaptec AACRAID controller. First, let's see what the usual suspects are within QEMU's SCSI offerings. I know I typically see things like the LSI Logic 53C895A, the MegaRAID SAS, and the various virtio options, along with the AMD PCscsi and VMware's PVSCSI. But, does QEMU explicitly *emulate* the Adaptec AACRAID? My initial instinct is no. Hold on, before I definitively close the door, let me dig a bit deeper. I need to check for any indication, perhaps in the character device space (char dev, sysfs, ioctl), or even whether a device node is created, which could signify some level of AACRAID support. Specifically, I need to look for `aac_cfg_major`, that's the tell. Aha! There's something in `linit.c`: `register_chrdev(aac_cfg_major, "aac")`. I need to track down where this `register_chrdev` is called. That could be a crucial clue in understanding any sort of Adaptec AACRAID emulation within the system. Let's see what turns up in the codebase. |
| 12/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "register_chrdev",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "drivers/scsi/aacraid/linit.c=1557=static void aac_init_char(void)\ndrivers/scsi/aacraid/linit.c-1558-{\ndrivers/scsi/aacraid/linit.c:1559:\taac_cfg_major = register_chrdev(0, \"aac\", \u0026aac_cfg_fops);\ndrivers/scsi/aacraid/linit.c-1560-\tif (aac_cfg_major \u003c 0) {\n--\ndrivers/scsi/aacraid/linit.c=1903=static void aac_remove_one(struct pci_dev *pdev)\n--\ndrivers/scsi/aacraid/linit.c-1925-\tif (list_empty(\u0026aac_devices)) {\ndrivers/scsi/aacraid/linit.c:1926:\t\tunregister_chrdev(aac_cfg_major, \"aac\");\ndrivers/scsi/aacraid/linit.c-1927-\t\taac_cfg_major = AAC_CHARDEV_NEEDS_REINIT;\n--\ndrivers/scsi/aacraid/linit.c=2066=static void __exit aac_exit(void)\n--\ndrivers/scsi/aacraid/linit.c-2068-\tif (aac_cfg_major \u003e -1)\ndrivers/scsi/aacraid/linit.c:2069:\t\tunregister_chrdev(aac_cfg_major, \"aac\");\ndrivers/scsi/aacraid/linit.c-2070-\tpci_unregister_driver(\u0026aac_pci_driver);\n"
} |
| 13/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 12525 output: 33 thoughts: 28 Thoughts: Okay, here's my take on those thoughts, tailored for an expert audience: **Analyzing the Call Site of `aac_init_char()`** Right, so the first thing I'm doing is zeroing in on the calls to `aac_init_char()`. It’s a pretty standard approach when debugging or analyzing any system, especially when I'm dealing with the initial setup or state of the character data structure. Knowing exactly *where* that initialization happens is crucial. That call site gives me the entry point, the context in which this function operates. I need to trace the initialization process and its execution path. I'm going to follow the code and see exactly where and how this `aac_init_char()` function gets invoked. It is the core of this investigation. |
| 14/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "aac_init_char",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "drivers/scsi/aacraid/linit.c=1514=static void __aac_shutdown(struct aac_dev * aac)\n--\ndrivers/scsi/aacraid/linit.c-1556-}\ndrivers/scsi/aacraid/linit.c:1557:static void aac_init_char(void)\ndrivers/scsi/aacraid/linit.c-1558-{\n--\ndrivers/scsi/aacraid/linit.c=1578=static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)\n--\ndrivers/scsi/aacraid/linit.c-1649-\tif (aac_cfg_major == AAC_CHARDEV_NEEDS_REINIT)\ndrivers/scsi/aacraid/linit.c:1650:\t\taac_init_char();\ndrivers/scsi/aacraid/linit.c-1651-\n--\ndrivers/scsi/aacraid/linit.c=2049=static int __init aac_init(void)\n--\ndrivers/scsi/aacraid/linit.c-2059-\ndrivers/scsi/aacraid/linit.c:2060:\taac_init_char();\ndrivers/scsi/aacraid/linit.c-2061-\n"
} |
| 15/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 13103 output: 34 thoughts: 60 Thoughts: **Investigating the Interplay of Char Devices and PCI Probing** Okay, hold on a second. Just because a character device like `/dev/aac` *exists* or is registered, does that automatically mean it's functional? Can I actually do anything useful with it if the underlying PCI device hasn't been probed and properly initialized? That seems like a critical question to answer. Let's dig into this and figure out the dependencies. My first thought is to examine the `aac_cfg_fops` structure. This likely defines the file operations for this particular device. I need to understand its relationship between the PCI device initialization and the character device operations. I'll need to meticulously inspect the `aac_cfg_fops` implementation, specifically focusing on the `open` and `ioctl` functions. Those are the key entry points for interacting with the device, and they'll likely reveal the necessary probe dependencies, error handling, and any prerequisite checks being performed. I need to see how the system ensures that the PCI device is correctly up and running before allowing access to or modification of the character device. |
| 16/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "aac_cfg_fops",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "drivers/scsi/aacraid/linit.c=1465=ssize_t aac_get_serial_number(struct device *device, char *buf)\n--\ndrivers/scsi/aacraid/linit.c-1469-\ndrivers/scsi/aacraid/linit.c:1470:static const struct file_operations aac_cfg_fops = {\ndrivers/scsi/aacraid/linit.c-1471-\t.owner\t\t= THIS_MODULE,\n--\ndrivers/scsi/aacraid/linit.c=1557=static void aac_init_char(void)\ndrivers/scsi/aacraid/linit.c-1558-{\ndrivers/scsi/aacraid/linit.c:1559:\taac_cfg_major = register_chrdev(0, \"aac\", \u0026aac_cfg_fops);\ndrivers/scsi/aacraid/linit.c-1560-\tif (aac_cfg_major \u003c 0) {\n"
} |
| 17/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 13691 output: 41 thoughts: 26 Thoughts: Okay, let's dive into this. I'm going to pull up `drivers/scsi/aacraid/linit.c` and zero in around line 1470. I need to refresh my memory on the intricacies of the AACRAID driver's initialization sequence, specifically the parts that handle the SCSI layer. I'm betting there's something interesting happening there, a potential interaction point between the controller's setup and the SCSI subsystem's expectations. I wonder if there might be a race condition lurking, or perhaps some subtle error handling related to device discovery or command queuing that I've been meaning to revisit. Let's see what line 1470 has to tell me. I’m thinking this could be a good starting point to further investigate the reported SCSI related issue. |
| 18/2 | 2026/10/13 17:34 | tool | read-file |
0mArgs:{
"File": "drivers/scsi/aacraid/linit.c",
"FirstLine": 1460,
"LineCount": 40
}Results: {
"Contents": "1460:\t\tNULL\n1461:\t};\n1462:\t\n1463:\tATTRIBUTE_GROUPS(aac_host);\n1464:\t\n1465:\tssize_t aac_get_serial_number(struct device *device, char *buf)\n1466:\t{\n1467:\t\treturn aac_show_serial_number(device, \u0026aac_serial_number, buf);\n1468:\t}\n1469:\t\n1470:\tstatic const struct file_operations aac_cfg_fops = {\n1471:\t\t.owner\t\t= THIS_MODULE,\n1472:\t\t.unlocked_ioctl\t= aac_cfg_ioctl,\n1473:\t#ifdef CONFIG_COMPAT\n1474:\t\t.compat_ioctl = aac_cfg_ioctl,\n1475:\t#endif\n1476:\t\t.open\t\t= aac_cfg_open,\n1477:\t\t.llseek\t\t= noop_llseek,\n1478:\t};\n1479:\t\n1480:\tstatic const struct scsi_host_template aac_driver_template = {\n1481:\t\t.module\t\t\t\t= THIS_MODULE,\n1482:\t\t.name\t\t\t\t= \"AAC\",\n1483:\t\t.proc_name\t\t\t= AAC_DRIVERNAME,\n1484:\t\t.info\t\t\t\t= aac_info,\n1485:\t\t.ioctl\t\t\t\t= aac_ioctl,\n1486:\t#ifdef CONFIG_COMPAT\n1487:\t\t.compat_ioctl\t\t\t= aac_ioctl,\n1488:\t#endif\n1489:\t\t.queuecommand\t\t\t= aac_queuecommand,\n1490:\t\t.bios_param\t\t\t= aac_biosparm,\n1491:\t\t.shost_groups\t\t\t= aac_host_groups,\n1492:\t\t.sdev_configure\t\t\t= aac_sdev_configure,\n1493:\t\t.change_queue_depth\t\t= aac_change_queue_depth,\n1494:\t\t.sdev_groups\t\t\t= aac_dev_groups,\n1495:\t\t.eh_abort_handler\t\t= aac_eh_abort,\n1496:\t\t.eh_device_reset_handler\t= aac_eh_dev_reset,\n1497:\t\t.eh_target_reset_handler\t= aac_eh_target_reset,\n1498:\t\t.eh_bus_reset_handler\t\t= aac_eh_bus_reset,\n1499:\t\t.eh_host_reset_handler\t\t= aac_eh_host_reset,\n"
} |
| 19/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 14613 output: 33 thoughts: 22 Thoughts: Okay, let's dive into this code. **Investigating `aac_cfg_open` and `aac_cfg_ioctl`** Alright, let's get down to brass tacks and figure out precisely what `aac_cfg_open` and `aac_cfg_ioctl` are up to. I need to understand their roles in the system. They likely handle the opening and configuration (or control) interface for this AAC (likely meaning Advanced Audio Coding) subsystem, but the specifics are where the juicy details lie. I'll need to trace their implementation, examining the data structures they interact with, and identify the key operations they perform. Specifically, I need to know what kind of device files or channels they create and how they manage the flow of data or commands. This is where the magic happens, and understanding these two functions is essential to understand the overall picture of the configuration process. This seems like a good place to start my investigation. |
| 20/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "aac_cfg_open",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "drivers/scsi/aacraid/linit.c=1085=static int aac_eh_host_reset(struct scsi_cmnd *cmd)\n--\ndrivers/scsi/aacraid/linit.c-1133-/**\ndrivers/scsi/aacraid/linit.c:1134: *\taac_cfg_open\t\t-\topen a configuration file\ndrivers/scsi/aacraid/linit.c-1135- *\t@inode: inode being opened\n--\ndrivers/scsi/aacraid/linit.c-1144-\ndrivers/scsi/aacraid/linit.c:1145:static int aac_cfg_open(struct inode *inode, struct file *file)\ndrivers/scsi/aacraid/linit.c-1146-{\n--\ndrivers/scsi/aacraid/linit.c=1470=static const struct file_operations aac_cfg_fops = {\n--\ndrivers/scsi/aacraid/linit.c-1475-#endif\ndrivers/scsi/aacraid/linit.c:1476:\t.open\t\t= aac_cfg_open,\ndrivers/scsi/aacraid/linit.c-1477-\t.llseek\t\t= noop_llseek,\n"
} |
| 21/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 15196 output: 41 thoughts: 26 Thoughts: Okay, let's dive into this. Here's my take on understanding this `aac_cfg_open` function within the `linit.c` file of the `aacraid` driver: **Dissecting `aac_cfg_open`** Alright, I see we're looking at `aac_cfg_open`. Given the context – `drivers/scsi/aacraid/linit.c` – I'm immediately expecting this function to be the entry point for opening or initializing the configuration interface for the Adaptec RAID controller driver, which is what `aacraid` appears to be. Based on my experience, `linit.c` is very likely the low-level initialization file, so `aac_cfg_open` probably handles the early stages of setup and device connection, maybe dealing with PCI device probing or resource allocation. It's likely involved in setting up the configfs interface or some other method of accessing and managing the controller's settings at a system level, right? I'd bet this function does something like checking permissions, validating the requested configuration access, and then calling other internal `aacraid` functions to actually establish the connection or communication channel. Time to see what I'm right about! |
| 22/2 | 2026/10/13 17:34 | tool | read-file |
0mArgs:{
"File": "drivers/scsi/aacraid/linit.c",
"FirstLine": 1140,
"LineCount": 40
}Results: {
"Contents": "1140:\t *\n1141:\t *\tBugs: This needs extending to check a given adapter is present\n1142:\t *\tso we can support hot plugging, and to ref count adapters.\n1143:\t */\n1144:\t\n1145:\tstatic int aac_cfg_open(struct inode *inode, struct file *file)\n1146:\t{\n1147:\t\tstruct aac_dev *aac;\n1148:\t\tunsigned minor_number = iminor(inode);\n1149:\t\tint err = -ENODEV;\n1150:\t\n1151:\t\tmutex_lock(\u0026aac_mutex); /* BKL pushdown: nothing else protects this list */\n1152:\t\tlist_for_each_entry(aac, \u0026aac_devices, entry) {\n1153:\t\t\tif (aac-\u003eid == minor_number) {\n1154:\t\t\t\tfile-\u003eprivate_data = aac;\n1155:\t\t\t\terr = 0;\n1156:\t\t\t\tbreak;\n1157:\t\t\t}\n1158:\t\t}\n1159:\t\tmutex_unlock(\u0026aac_mutex);\n1160:\t\n1161:\t\treturn err;\n1162:\t}\n1163:\t\n1164:\t/**\n1165:\t *\taac_cfg_ioctl\t\t-\tAAC configuration request\n1166:\t *\t@file: file handle\n1167:\t *\t@cmd: ioctl command code\n1168:\t *\t@arg: argument\n1169:\t *\n1170:\t *\tHandles a configuration ioctl. Currently this involves wrapping it\n1171:\t *\tup and feeding it into the nasty windowsalike glue layer.\n1172:\t *\n1173:\t *\tBugs: Needs locking against parallel ioctls lower down\n1174:\t *\tBugs: Needs to handle hot plugging\n1175:\t */\n1176:\t\n1177:\tstatic long aac_cfg_ioctl(struct file *file,\n1178:\t\t\tunsigned int cmd, unsigned long arg)\n1179:\t{\n"
} |
| 23/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 16086 output: 31 thoughts: 173 Thoughts: **Analyzing the Device Open Function** Okay, let's break down this `aac_cfg_open` function. My initial thought is to examine how it handles device identification during the open operation. I see it starts with a mutex lock, which makes sense to ensure thread safety when accessing the shared device list. It's using `aac_mutex` to protect `aac_devices`, and that's a key detail to note. Then comes the list traversal. The code iterates through the `aac_devices` list, comparing the `aac->id` (presumably the minor number) with the requested minor number. If a match is found, the `file->private_data` is set to the corresponding `aac` structure, and the function returns successfully. But here's the crucial point: if the loop completes without finding a match, the function returns an error code, specifically `-ENODEV`. This immediately raises a red flag in my mind. If `aac_devices` is empty, or if the requested minor number isn't registered, it *will* return `-ENODEV`. So, what's populating this `aac_devices` list in the first place? I need to track down where entries are added. I need to understand the device probe and registration process. That will be my next investigation. Let's see how `aac_devices` gets populated, which I'm pretty sure will be in the `aac_probe_one` function. |
| 24/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "aac_devices",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "drivers/scsi/aacraid/linit.c=68=static DEFINE_MUTEX(aac_mutex);\ndrivers/scsi/aacraid/linit.c:69:static LIST_HEAD(aac_devices);\ndrivers/scsi/aacraid/linit.c-70-static int aac_cfg_major = AAC_CHARDEV_UNREGISTERED;\n--\ndrivers/scsi/aacraid/linit.c=1145=static int aac_cfg_open(struct inode *inode, struct file *file)\n--\ndrivers/scsi/aacraid/linit.c-1151-\tmutex_lock(\u0026aac_mutex); /* BKL pushdown: nothing else protects this list */\ndrivers/scsi/aacraid/linit.c:1152:\tlist_for_each_entry(aac, \u0026aac_devices, entry) {\ndrivers/scsi/aacraid/linit.c-1153-\t\tif (aac-\u003eid == minor_number) {\n--\ndrivers/scsi/aacraid/linit.c=1578=static int aac_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)\n--\ndrivers/scsi/aacraid/linit.c-1582-\tstruct aac_dev *aac;\ndrivers/scsi/aacraid/linit.c:1583:\tstruct list_head *insert = \u0026aac_devices;\ndrivers/scsi/aacraid/linit.c-1584-\tint error;\n--\ndrivers/scsi/aacraid/linit.c-1595-\ndrivers/scsi/aacraid/linit.c:1596:\tlist_for_each_entry(aac, \u0026aac_devices, entry) {\ndrivers/scsi/aacraid/linit.c-1597-\t\tif (aac-\u003eid \u003e unique_id)\n--\ndrivers/scsi/aacraid/linit.c=1903=static void aac_remove_one(struct pci_dev *pdev)\n--\ndrivers/scsi/aacraid/linit.c-1924-\tpci_disable_device(pdev);\ndrivers/scsi/aacraid/linit.c:1925:\tif (list_empty(\u0026aac_devices)) {\ndrivers/scsi/aacraid/linit.c-1926-\t\tunregister_chrdev(aac_cfg_major, \"aac\");\n"
} |
| 25/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 17212 output: 34 thoughts: 68 Thoughts: Here's my understanding of the situation: **Decoding the AAC Driver's Device Allocation** Okay, so I'm focusing on how the `aac` driver handles device initialization. The critical point is that I need to trace device allocation and registration. It's becoming clear that `aac_probe_one` is the **only** function where we're actually allocating and adding a `aac_dev` structure to the `aac_devices` list. That's a good place to start my investigation. Furthermore, `aac_probe_one` is the `probe` callback function defined in the `pci_driver` structure. Which confirms that this function is part of the PCI device detection process. Now, I need to understand what devices this driver is expected to handle, and what device IDs it recognizes. I'll take a look at `aac_pci_tbl` which I'm pretty sure will contain the PCI ID table for this driver. That should give me a good handle on the range of hardware it supports. |
| 26/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "aac_pci_tbl",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "drivers/scsi/aacraid/linit.c=71=char aac_driver_version[] = AAC_DRIVER_FULL_VERSION;\n--\ndrivers/scsi/aacraid/linit.c-78- */\ndrivers/scsi/aacraid/linit.c:79:static const struct pci_device_id aac_pci_tbl[] = {\ndrivers/scsi/aacraid/linit.c-80-\t{ 0x1028, 0x0001, 0x1028, 0x0001, 0, 0, 0 }, /* PERC 2/Si (Iguana/PERC2Si) */\n--\ndrivers/scsi/aacraid/linit.c-151-};\ndrivers/scsi/aacraid/linit.c:152:MODULE_DEVICE_TABLE(pci, aac_pci_tbl);\ndrivers/scsi/aacraid/linit.c-153-\n--\ndrivers/scsi/aacraid/linit.c=2039=static struct pci_driver aac_pci_driver = {\ndrivers/scsi/aacraid/linit.c-2040-\t.name\t\t= AAC_DRIVERNAME,\ndrivers/scsi/aacraid/linit.c:2041:\t.id_table\t= aac_pci_tbl,\ndrivers/scsi/aacraid/linit.c-2042-\t.probe\t\t= aac_probe_one,\n"
} |
| 27/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 17917 output: 43 thoughts: 99 Thoughts: **Analyzing Adaptec RAID Controller Driver Components** Okay, so I'm looking at `aac_pci_tbl`. Right, that's the table that defines the PCI IDs for Adaptec RAID controllers – the classic stuff like the PERC 2/Si, 2810SA, and the 21610SA, you know, those physical PCIe and PCI RAID host bus adapters. Just making sure I'm on the right track, given the context. Now, hold on a second... let's shift focus to any modified function pointers. Hmm, let me check `aac_srb_callback` and `hba_resp_task_complete`. Are there any changes to how these work? I'm wondering, where are those actually used? Gotta find the call sites. Time to fire up the trusty `grep` and see what comes up. |
| 28/2 | 2026/10/13 17:34 | tool | grepper |
0mArgs:{
"Expression": "aac_srb_callback|hba_resp_task_complete",
"PathPrefixes": [
"drivers/scsi/aacraid"
]
}Results: {
"Output": "drivers/scsi/aacraid/aachba.c=1531=static struct aac_hba_cmd_req *aac_construct_hbacmd(struct fib *fib,\n--\ndrivers/scsi/aacraid/aachba.c-1576-\ndrivers/scsi/aacraid/aachba.c:1577:static void aac_srb_callback(void *context, struct fib * fibptr);\ndrivers/scsi/aacraid/aachba.c-1578-\ndrivers/scsi/aacraid/aachba.c=1579=static int aac_scsi_64(struct fib * fib, struct scsi_cmnd * cmd)\n--\ndrivers/scsi/aacraid/aachba.c-1605-\t\t\t\tfibsize, FsaNormal, 0, 1,\ndrivers/scsi/aacraid/aachba.c:1606:\t\t\t\t (fib_callback) aac_srb_callback,\ndrivers/scsi/aacraid/aachba.c-1607-\t\t\t\t (void *) cmd);\n--\ndrivers/scsi/aacraid/aachba.c=1610=static int aac_scsi_32(struct fib * fib, struct scsi_cmnd * cmd)\n--\ndrivers/scsi/aacraid/aachba.c-1635-\treturn aac_fib_send(ScsiPortCommand, fib, fibsize, FsaNormal, 0, 1,\ndrivers/scsi/aacraid/aachba.c:1636:\t\t\t\t (fib_callback) aac_srb_callback, (void *) cmd);\ndrivers/scsi/aacraid/aachba.c-1637-}\n--\ndrivers/scsi/aacraid/aachba.c=3352=int aac_dev_ioctl(struct aac_dev *dev, unsigned int cmd, void __user *arg)\n--\ndrivers/scsi/aacraid/aachba.c-3368-/**\ndrivers/scsi/aacraid/aachba.c:3369: * aac_srb_callback\ndrivers/scsi/aacraid/aachba.c-3370- * @context: the context set in the fib - here it is scsi cmd\n--\ndrivers/scsi/aacraid/aachba.c-3374- */\ndrivers/scsi/aacraid/aachba.c:3375:static void aac_srb_callback(void *context, struct fib * fibptr)\ndrivers/scsi/aacraid/aachba.c-3376-{\n--\ndrivers/scsi/aacraid/aachba.c-3417-\ndrivers/scsi/aacraid/aachba.c:3418:\t\tpr_warn(\"aac_srb_callback: srb failed, status = %d\\n\",\ndrivers/scsi/aacraid/aachba.c-3419-\t\t\t\tle32_to_cpu(srbreply-\u003estatus));\n--\ndrivers/scsi/aacraid/aachba.c-3548-#ifdef AAC_DETAILED_STATUS_INFO\ndrivers/scsi/aacraid/aachba.c:3549:\t\tpr_warn(\"aac_srb_callback: check condition, status = %d len=%d\\n\",\ndrivers/scsi/aacraid/aachba.c-3550-\t\t\t\t\tle32_to_cpu(srbreply-\u003estatus), len);\n--\ndrivers/scsi/aacraid/aachba.c-3564-\ndrivers/scsi/aacraid/aachba.c:3565:static void hba_resp_task_complete(struct aac_dev *dev,\ndrivers/scsi/aacraid/aachba.c-3566-\t\t\t\t\tstruct scsi_cmnd *scsicmd,\n--\ndrivers/scsi/aacraid/aachba.c=3649=void aac_hba_callback(void *context, struct fib *fibptr)\n--\ndrivers/scsi/aacraid/aachba.c-3675-\tcase HBA_RESP_SVCRES_TASK_COMPLETE:\ndrivers/scsi/aacraid/aachba.c:3676:\t\thba_resp_task_complete(dev, scsicmd, err);\ndrivers/scsi/aacraid/aachba.c-3677-\t\tbreak;\n"
} |
| 29/2 | 2026/10/13 17:34 | llm | patch-evaluator |
0mModel:gemini-3.8-flash Args: null Results: null Tokens: input: 19349 output: 158 thoughts: 1295 Thoughts: **Analysis of AACRAID SCSI Command Completion Callbacks for Fuzzing** Okay, so I'm looking at `aac_srb_callback` and `hba_resp_task_complete`. They're callbacks triggered when the firmware completes SCSI commands sent to an Adaptec RAID controller, specifically within the `aacraid` driver. These functions rely on a fully initialized `aac_dev` structure, which, in turn, is connected to a physical Adaptec RAID controller device via PCI. The whole point is to handle responses from a *physical* Adaptec RAID controller. My initial thought is to check if I can somehow get this working in QEMU or GCE. But I have to remember the instructions. I know that if code is structurally unreachable, I shouldn't bother with fuzzing. My analysis needs to be thorough. First, let's verify if QEMU emulates this hardware. And as I suspected, QEMU doesn't emulate the Adaptec AACRAID controller. It's a fundamental architectural limitation. It's not something you can just swap out with a pseudo-driver, USB device, or anything else like that. The `aacraid` driver *strictly* requires PCI hardware matching an Adaptec or Dell PERC device. The `aac_pci_tbl` and the `aac_probe_one` require the device to be present, and it requires firmware interaction on the card itself, which includes MMIO mapping with `aac_adapter_ioremap`, `aac_adapter_comm`, and also a firmware. Without the physical card and a successful `probe`, the `aac_dev` struct will not be initialized, and these callbacks will never be called. Even if someone were to try to manually create `/dev/aac` using `mknod`, the `aac_cfg_open` check validates the existence of the `aac_dev` in a list and would fail. The callback functions are response interrupt and completion handlers, they fundamentally require the physical hardware to exist and be communicating. I've gone back to the instructions. The crucial part is "Structurally unreachable hardware: * Vendor-specific PCIe switches, SmartNICs, or GPU drivers... requiring physical ASIC/PCIe cards not emulated in standard QEMU". This precisely describes this situation. The `aacraid` driver is a vendor-specific PCI driver that *absolutely* requires physical hardware that isn't emulated by the standard fuzzing environment, QEMU or GCE. So the verdict is clear: this code is *structurally* unreachable within the fuzzing context. I can't execute this code in the usual fuzzing environment. I need to provide the `set-results`. Since `WorthFuzzing` is `false`, the `FocusSymbols` must be empty, and `EnableConfigs` can be just the configuration flag for the driver, or empty. Therefore: * `EnableConfigs`: `["SCSI_AACRAID"]` * `FocusSymbols`: `[]` * `Reasoning`: The modified code within `aac_srb_callback` and `hba_resp_task_complete` of the `aacraid` driver is structurally unreachable. This code handles firmware command completion on Adaptec SCSI RAID controllers that require specific physical hardware (not emulated in QEMU or GCE) for interaction, and thus cannot be fuzzed using standard virtualization. |
| 30/2 | 2026/10/13 17:35 | tool | set-results |
0mArgs:{
"EnableConfigs": [
"SCSI_AACRAID"
],
"FocusSymbols": [],
"Reasoning": "The patch modifies sense buffer copying logic in `aac_srb_callback` and `hba_resp_task_complete` within the Adaptec AACRAID SCSI RAID controller driver (`drivers/scsi/aacraid/aachba.c`). This driver specifically targets physical Adaptec/Dell PERC PCI/PCIe RAID host bus adapters which are not emulated in standard virtualized fuzzing environments (QEMU/GCE). Because the driver requires non-emulated physical hardware to probe and execute, the modified code paths are structurally unreachable in syzkaller.",
"WorthFuzzing": false
}Results: {
"EnableConfigs": [
"SCSI_AACRAID"
],
"FocusSymbols": [],
"Reasoning": "The patch modifies sense buffer copying logic in `aac_srb_callback` and `hba_resp_task_complete` within the Adaptec AACRAID SCSI RAID controller driver (`drivers/scsi/aacraid/aachba.c`). This driver specifically targets physical Adaptec/Dell PERC PCI/PCIe RAID host bus adapters which are not emulated in standard virtualized fuzzing environments (QEMU/GCE). Because the driver requires non-emulated physical hardware to probe and execute, the modified code paths are structurally unreachable in syzkaller.",
"WorthFuzzing": false
} |
| 31/1 | 2026/10/13 17:35 | action | If |
0mArgs:{
"WorthFuzzing": false
}Results: null |
| Total Calls | Total Tokens | Avg Tokens | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|
| Total Calls | Total Duration (Seconds) | Avg Duration (Seconds) |
|---|