The APICv (apic->apicv_active) can be activated or deactivated at runtime, for instance, because of APICv inhibit reasons. Intel VMX employs different mechanisms to virtualize LAPIC based on whether APICv is active. When APICv is activated at runtime, GUEST_INTR_STATUS is used to configure and report the current pending IRR and ISR states. Unless a specific vector is explicitly included in EOI_EXIT_BITMAP, its EOI will not be trapped to KVM. Intel VMX automatically clears the corresponding ISR bit based on the GUEST_INTR_STATUS.SVI field. When APICv is deactivated at runtime, the VM_ENTRY_INTR_INFO_FIELD is used to specify the next interrupt vector to invoke upon VM-entry. The VMX IDT_VECTORING_INFO_FIELD is used to report un-invoked vectors on VM-exit. EOIs are always trapped to KVM, so the software can manually clear pending ISR bits. There are scenarios where, with APICv activated at runtime, a guest-issued EOI may not be able to clear the pending ISR bit. Taking vector 236 as an example, here is one scenario. 1. Suppose APICv is inactive. Vector 236 is pending in the IRR. 2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR, and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq(). 3. After VM-entry, vector 236 is invoked through the guest IDT. At this point, the data in VM_ENTRY_INTR_INFO_FIELD is no longer valid. The guest interrupt handler for vector 236 is invoked. 4. Suppose a VM exit occurs very early in the guest interrupt handler, before the EOI is issued. 5. Nothing is reported through the IDT_VECTORING_INFO_FIELD because vector 236 has already been invoked in the guest. 6. Now, suppose APICv is activated. Before the next VM-entry, KVM calls kvm_vcpu_update_apicv() to activate APICv. 7. Unfortunately, GUEST_INTR_STATUS.SVI is not configured, although vector 236 is still pending in the ISR. 8. After VM-entry, the guest finally issues the EOI for vector 236. However, because SVI is not configured, vector 236 is not cleared. 9. ISR is stalled forever on vector 236. Here is another scenario. 1. Suppose APICv is inactive. Vector 236 is pending in the IRR. 2. To handle KVM_REQ_EVENT, KVM moves vector 236 from the IRR to the ISR, and configures the VM_ENTRY_INTR_INFO_FIELD via vmx_inject_irq(). 3. VM-exit occurs immediately after the next VM-entry. The vector 236 is not invoked through the guest IDT. Instead, it is saved to the IDT_VECTORING_INFO_FIELD during the VM-exit. 4. KVM calls kvm_queue_interrupt() to re-queue the un-invoked vector 236 into vcpu->arch.interrupt. A KVM_REQ_EVENT is requested. 5. Now, suppose APICv is activated. Before the next VM-entry, KVM calls kvm_vcpu_update_apicv() to activate APICv. 6. Although APICv is now active, KVM still uses the legacy VM_ENTRY_INTR_INFO_FIELD to re-inject vector 236. GUEST_INTR_STATUS.SVI is not configured. 7. After the next VM-entry, vector 236 is invoked through the guest IDT. Finally, an EOI occurs. However, due to the lack of GUEST_INTR_STATUS.SVI configuration, vector 236 is not cleared from the ISR. 8. ISR is stalled forever on vector 236. Using QEMU as an example, vector 236 is stuck in ISR forever. (qemu) info lapic 1 dumping local APIC state for CPU 1 LVT0 0x00010700 active-hi edge masked ExtINT (vec 0) LVT1 0x00010400 active-hi edge masked NMI LVTPC 0x00000400 active-hi edge NMI LVTERR 0x000000fe active-hi edge Fixed (vec 254) LVTTHMR 0x00010000 active-hi edge masked Fixed (vec 0) LVTT 0x000400ec active-hi edge tsc-deadline Fixed (vec 236) Timer DCR=0x0 (divide by 2) initial_count = 0 current_count = 0 SPIV 0x000001ff APIC enabled, focus=off, spurious vec 255 ICR 0x000000fd physical edge de-assert no-shorthand ICR2 0x00000000 cpu 0 (X2APIC ID) ESR 0x00000000 ISR 236 IRR 37(level) 236 The issue is not applicable to AMD SVM which employs a different LAPIC virtualization mechanism. In addition, APICV_INHIBIT_REASON_IRQWIN ensures AMD SVM AVIC is not activated until the last interrupt is EOI. Fix the bug by configuring Intel VMX GUEST_INTR_STATUS.SVI if APICv is activated at runtime. Signed-off-by: Dongli Zhang --- Changed since v2: - Add support for guest mode (suggested by Chao Gao). - Add comments in the code (suggested by Chao Gao). - Remove WARN_ON_ONCE from vmx_hwapic_isr_update(). - Edit commit message "AMD SVM APICv" to "AMD SVM AVIC" (suggested by Alejandro Jimenez). arch/x86/kvm/vmx/vmx.c | 9 --------- arch/x86/kvm/x86.c | 7 +++++++ 2 files changed, 7 insertions(+), 9 deletions(-) diff --git a/arch/x86/kvm/vmx/vmx.c b/arch/x86/kvm/vmx/vmx.c index f87c216d976d..d263dbf0b917 100644 --- a/arch/x86/kvm/vmx/vmx.c +++ b/arch/x86/kvm/vmx/vmx.c @@ -6878,15 +6878,6 @@ void vmx_hwapic_isr_update(struct kvm_vcpu *vcpu, int max_isr) * VM-Exit, otherwise L1 with run with a stale SVI. */ if (is_guest_mode(vcpu)) { - /* - * KVM is supposed to forward intercepted L2 EOIs to L1 if VID - * is enabled in vmcs12; as above, the EOIs affect L2's vAPIC. - * Note, userspace can stuff state while L2 is active; assert - * that VID is disabled if and only if the vCPU is in KVM_RUN - * to avoid false positives if userspace is setting APIC state. - */ - WARN_ON_ONCE(vcpu->wants_to_run && - nested_cpu_has_vid(get_vmcs12(vcpu))); to_vmx(vcpu)->nested.update_vmcs01_hwapic_isr = true; return; } diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index b4b5d2d09634..08b34431c187 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -10878,9 +10878,16 @@ void __kvm_vcpu_update_apicv(struct kvm_vcpu *vcpu) * pending. At the same time, KVM_REQ_EVENT may not be set as APICv was * still active when the interrupt got accepted. Make sure * kvm_check_and_inject_events() is called to check for that. + * + * When APICv gets enabled, updating SVI is necessary; otherwise, + * SVI won't reflect the highest bit in vISR and the next EOI from + * the guest won't be virtualized correctly, as the CPU will clear + * the SVI bit from vISR. */ if (!apic->apicv_active) kvm_make_request(KVM_REQ_EVENT, vcpu); + else + kvm_apic_update_hwapic_isr(vcpu); out: preempt_enable(); -- 2.39.3