From: Thomas Wismer The TPS23881B uses different firmware than the TPS23881. Trying to load the TPS23881 firmware on a TPS23881B device fails and must be omitted. The TPS23881B ships with a more recent ROM firmware. Moreover, no updated firmware has been released yet and so the firmware loading step must be skipped. As of today, the TPS23881B is intended to use its ROM firmware. Signed-off-by: Thomas Wismer --- drivers/net/pse-pd/tps23881.c | 65 +++++++++++++++++++++++++++-------- 1 file changed, 51 insertions(+), 14 deletions(-) diff --git a/drivers/net/pse-pd/tps23881.c b/drivers/net/pse-pd/tps23881.c index b724b222ab44..f45c08759082 100644 --- a/drivers/net/pse-pd/tps23881.c +++ b/drivers/net/pse-pd/tps23881.c @@ -55,8 +55,6 @@ #define TPS23881_REG_TPON BIT(0) #define TPS23881_REG_FWREV 0x41 #define TPS23881_REG_DEVID 0x43 -#define TPS23881_REG_DEVID_MASK 0xF0 -#define TPS23881_DEVICE_ID 0x02 #define TPS23881_REG_CHAN1_CLASS 0x4c #define TPS23881_REG_SRAM_CTRL 0x60 #define TPS23881_REG_SRAM_DATA 0x61 @@ -1012,8 +1010,28 @@ static const struct pse_controller_ops tps23881_ops = { .pi_get_pw_req = tps23881_pi_get_pw_req, }; -static const char fw_parity_name[] = "ti/tps23881/tps23881-parity-14.bin"; -static const char fw_sram_name[] = "ti/tps23881/tps23881-sram-14.bin"; +struct tps23881_info { + u8 dev_id; /* device ID and silicon revision */ + const char *fw_parity_name; /* parity code firmware file name */ + const char *fw_sram_name; /* SRAM code firmware file name */ +}; + +enum tps23881_model { + TPS23881, + TPS23881B, +}; + +static const struct tps23881_info tps23881_info[] = { + [TPS23881] = { + .dev_id = 0x22, + .fw_parity_name = "ti/tps23881/tps23881-parity-14.bin", + .fw_sram_name = "ti/tps23881/tps23881-sram-14.bin", + }, + [TPS23881B] = { + .dev_id = 0x24, + /* skip SRAM load, ROM firmware already IEEE802.3bt compliant */ + }, +}; struct tps23881_fw_conf { u8 reg; @@ -1085,16 +1103,17 @@ static int tps23881_flash_sram_fw_part(struct i2c_client *client, return ret; } -static int tps23881_flash_sram_fw(struct i2c_client *client) +static int tps23881_flash_sram_fw(struct i2c_client *client, + const struct tps23881_info *info) { int ret; - ret = tps23881_flash_sram_fw_part(client, fw_parity_name, + ret = tps23881_flash_sram_fw_part(client, info->fw_parity_name, tps23881_fw_parity_conf); if (ret) return ret; - ret = tps23881_flash_sram_fw_part(client, fw_sram_name, + ret = tps23881_flash_sram_fw_part(client, info->fw_sram_name, tps23881_fw_sram_conf); if (ret) return ret; @@ -1412,6 +1431,7 @@ static int tps23881_setup_irq(struct tps23881_priv *priv, int irq) static int tps23881_i2c_probe(struct i2c_client *client) { struct device *dev = &client->dev; + const struct tps23881_info *info; struct tps23881_priv *priv; struct gpio_desc *reset; int ret; @@ -1422,6 +1442,10 @@ static int tps23881_i2c_probe(struct i2c_client *client) return -ENXIO; } + info = device_get_match_data(dev); + if (!info) + return -EINVAL; + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); if (!priv) return -ENOMEM; @@ -1440,7 +1464,7 @@ static int tps23881_i2c_probe(struct i2c_client *client) * to Load TPS2388x SRAM and Parity Code over I2C" (Rev E)) * indicates we should delay that programming by at least 50ms. So * we'll wait the entire 50ms here to ensure we're safe to go to the - * SRAM loading proceedure. + * SRAM loading procedure. */ msleep(50); } @@ -1449,20 +1473,26 @@ static int tps23881_i2c_probe(struct i2c_client *client) if (ret < 0) return ret; - if (FIELD_GET(TPS23881_REG_DEVID_MASK, ret) != TPS23881_DEVICE_ID) { + if (ret != info->dev_id) { dev_err(dev, "Wrong device ID\n"); return -ENXIO; } - ret = tps23881_flash_sram_fw(client); - if (ret < 0) - return ret; + if (info->fw_sram_name) { + ret = tps23881_flash_sram_fw(client, info); + if (ret < 0) + return ret; + } ret = i2c_smbus_read_byte_data(client, TPS23881_REG_FWREV); if (ret < 0) return ret; - dev_info(&client->dev, "Firmware revision 0x%x\n", ret); + if (ret == 0xFF) + dev_warn(&client->dev, "Device entered safe mode\n"); + else + dev_info(&client->dev, "Firmware revision 0x%x%s\n", ret, + ret == 0x00 ? " (ROM firmware)" : ""); /* Set configuration B, 16 bit access on a single device address */ ret = i2c_smbus_read_byte_data(client, TPS23881_REG_GEN_MASK); @@ -1504,7 +1534,14 @@ static const struct i2c_device_id tps23881_id[] = { MODULE_DEVICE_TABLE(i2c, tps23881_id); static const struct of_device_id tps23881_of_match[] = { - { .compatible = "ti,tps23881", }, + { + .compatible = "ti,tps23881", + .data = &tps23881_info[TPS23881] + }, + { + .compatible = "ti,tps23881b", + .data = &tps23881_info[TPS23881B] + }, { }, }; MODULE_DEVICE_TABLE(of, tps23881_of_match); -- 2.43.0 From: Thomas Wismer Add the TPS23881B I2C power sourcing equipment controller to the list of supported devices. Falling back to the TPS23881 predecessor device is not suitable as firmware loading needs to handled differently by the driver. The TPS23881 and TPS23881B devices require different firmware. Trying to load the TPS23881 firmware on a TPS23881B device fails and must therefore be omitted. Signed-off-by: Thomas Wismer Acked-by: Conor Dooley --- Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml | 1 + 1 file changed, 1 insertion(+) diff --git a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml index bb1ee3398655..0b3803f647b7 100644 --- a/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml +++ b/Documentation/devicetree/bindings/net/pse-pd/ti,tps23881.yaml @@ -16,6 +16,7 @@ properties: compatible: enum: - ti,tps23881 + - ti,tps23881b reg: maxItems: 1 -- 2.43.0