From: Chad Monroe With flow stats enabled, PPE offload setup requests flow statistics from the NPU. If the running NPU firmware does not support flow counters, the request fails and the current setup path aborts PPE offload. Treat flow statistics as an optional capability so that a failure to set up the counters does not prevent normal PPE offload. Record whether flow statistics are available and continue PPE initialization when the NPU refuses the flow-statistics request. Also treat a zero NPU statistics address returned by the firmware as a refusal. The host-side DMA buffer (foe_stats_dma) is allocated by dmam_alloc_coherent() in airoha_ppe_init() from system memory. The NPU statistics address (npu_stats_addr) is a separate allocation from the NPU firmware's internal SRAM pool. When that pool is exhausted, the firmware replies with success and npu_stats_addr = 0. A zero address does not provide a usable counter region and must not be passed to devm_ioremap(). When flow stats are available, clear PSE_PORT6_SHARE_DIS so that PSE port 6 (CDM3 path to the NPU) participates in shared-buffer flow control, which the counter traffic path needs. When flow statistics are unavailable, PPE continues to operate without NPU flow counters while retaining normal offload functionality. This combines the original SmartRG/Airoha fixes for: - keeping PPE offload active when the NPU refuses flow statistics - treating a zero NPU statistics address as a flow-statistics refusal Based on the original SmartRG/Airoha work by Chad Monroe: 5ce96ab ("SDG-9458: keep PPE offload when NPU refuses flow stats") 0ad8528 ("SDG-9458: airoha: treat a zero NPU stats address as a refusal") Fixes: b81e0f2b58be ("net: airoha: Add FLOW_CLS_STATS callback support") Tested-on: AN7581 with MT7992 Signed-off-by: Chad Monroe Signed-off-by: SAYANTAN NANDY --- Changes since v1: - Rename flow_stats to flow_stats_cap (Lorenzo). - Explain that npu_stats_addr is an NPU firmware SRAM allocation, distinct from the host-side foe_stats_dma buffer (Lorenzo). - Explain why PSE_PORT6_SHARE_DIS is cleared for counter traffic (Lorenzo). - Use airoha_fe_clear() and shorten the warning message (Lorenzo). - Add hardware testing information requested by netdev-bot. drivers/net/ethernet/airoha/airoha_eth.h | 1 + drivers/net/ethernet/airoha/airoha_npu.c | 8 ++++++++ drivers/net/ethernet/airoha/airoha_ppe.c | 17 +++++++++++------ drivers/net/ethernet/airoha/airoha_regs.h | 2 ++ 4 files changed, 22 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/airoha/airoha_eth.h b/drivers/net/ethernet/airoha/airoha_eth.h index 8277c1c87bb3..da4a3ba69e3c 100644 --- a/drivers/net/ethernet/airoha/airoha_eth.h +++ b/drivers/net/ethernet/airoha/airoha_eth.h @@ -617,6 +617,7 @@ struct airoha_ppe { void *foe; dma_addr_t foe_dma; + bool flow_stats_cap; struct rhashtable l2_flows; diff --git a/drivers/net/ethernet/airoha/airoha_npu.c b/drivers/net/ethernet/airoha/airoha_npu.c index 4d3195eb00f7..b32a01dbe06b 100644 --- a/drivers/net/ethernet/airoha/airoha_npu.c +++ b/drivers/net/ethernet/airoha/airoha_npu.c @@ -450,6 +450,14 @@ static int airoha_npu_ppe_stats_setup(struct airoha_npu *npu, if (err) goto out; + /* The firmware reports success with a zero address when its SRAM + * pool has no room left for the counters. + */ + if (!ppe_data->stats_info.npu_stats_addr) { + err = -ENOSPC; + goto out; + } + npu->stats = devm_ioremap(npu->dev, ppe_data->stats_info.npu_stats_addr, size); diff --git a/drivers/net/ethernet/airoha/airoha_ppe.c b/drivers/net/ethernet/airoha/airoha_ppe.c index 92611802801e..0957f331478a 100644 --- a/drivers/net/ethernet/airoha/airoha_ppe.c +++ b/drivers/net/ethernet/airoha/airoha_ppe.c @@ -37,10 +37,7 @@ static const struct rhashtable_params airoha_l2_flow_table_params = { static int airoha_ppe_get_num_stats_entries(struct airoha_ppe *ppe) { - if (!IS_ENABLED(CONFIG_NET_AIROHA_FLOW_STATS)) - return -EOPNOTSUPP; - - if (airoha_is_7583(ppe->eth)) + if (!ppe->flow_stats_cap) return -EOPNOTSUPP; return PPE_STATS_NUM_ENTRIES; @@ -144,6 +141,9 @@ static void airoha_ppe_hw_init(struct airoha_ppe *ppe) sram_ppe_num_data_entries = PPE_RAM_NUM_ENTRIES_SHIFT(sram_ppe_num_data_entries); + if (ppe->flow_stats_cap) + airoha_fe_clear(eth, PSE_FC_CFG, PSE_PORT6_SHARE_DIS); + for (i = 0; i < eth->soc->num_ppe; i++) { airoha_fe_wr(eth, REG_PPE_TB_BASE(i), ppe->foe_dma + sram_tb_size); @@ -1456,8 +1456,11 @@ static int airoha_ppe_offload_setup(struct airoha_eth *eth) if (ppe_num_stats_entries > 0) { err = npu->ops.ppe_init_stats(npu, ppe->foe_stats_dma, ppe_num_stats_entries); - if (err) - goto error_npu_put; + if (err) { + dev_warn(eth->dev, "NPU refused flow stats (%d)\n", + err); + ppe->flow_stats_cap = false; + } } airoha_ppe_hw_init(ppe); @@ -1608,6 +1611,8 @@ int airoha_ppe_init(struct airoha_eth *eth) ppe->dev.priv = ppe; ppe->eth = eth; eth->ppe = ppe; + ppe->flow_stats_cap = IS_ENABLED(CONFIG_NET_AIROHA_FLOW_STATS) && + !airoha_is_7583(eth); ppe_num_entries = airoha_ppe_get_total_num_entries(ppe); foe_size = ppe_num_entries * sizeof(struct airoha_foe_entry); diff --git a/drivers/net/ethernet/airoha/airoha_regs.h b/drivers/net/ethernet/airoha/airoha_regs.h index 442b48c9b991..aee06c058586 100644 --- a/drivers/net/ethernet/airoha/airoha_regs.h +++ b/drivers/net/ethernet/airoha/airoha_regs.h @@ -72,6 +72,8 @@ #define PSE_CFG_OQ_RSV_MASK GENMASK(13, 0) #define PSE_FQ_CFG 0x008c +#define PSE_FC_CFG 0x0098 +#define PSE_PORT6_SHARE_DIS BIT(22) #define PSE_FQ_LIMIT_MASK GENMASK(14, 0) #define REG_FE_PSE_BUF_SET 0x0090 -- 2.43.0