Correct spelling as flagged by codespell. Signed-off-by: Simon Horman --- drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c | 4 ++-- drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 4 ++-- drivers/net/ethernet/stmicro/stmmac/dwmac1000.h | 2 +- drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c | 2 +- drivers/net/ethernet/stmicro/stmmac/enh_desc.c | 2 +- drivers/net/ethernet/stmicro/stmmac/mmc_core.c | 4 ++-- drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c | 2 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 10 +++++----- drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c | 2 +- drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c | 2 +- 10 files changed, 17 insertions(+), 17 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c index 97de4726208e1bc01e4980da99ace72a3e2e1d54..ecc0c34834235207cd082655cb021da3382cb350 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-imx.c @@ -270,9 +270,9 @@ imx_dwmac_parse_dt(struct imx_priv_data *dwmac, struct device *dev) if (of_machine_is_compatible("fsl,imx8mp") || of_machine_is_compatible("fsl,imx91") || of_machine_is_compatible("fsl,imx93")) { - /* Binding doc describes the propety: + /* Binding doc describes the property: * is required by i.MX8MP, i.MX91, i.MX93. - * is optinoal for i.MX8DXL. + * is optional for i.MX8DXL. */ dwmac->intf_regmap = syscon_regmap_lookup_by_phandle_args(np, "intf_mode", 1, diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c index 8aa496ac85cce5bc3e2bcec5ceb880ada79e472c..c01b86fd64da1303aa4c905a7c6bb844515d5130 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -746,7 +746,7 @@ static int sun8i_dwmac_reset(struct stmmac_priv *priv) v = readl(priv->ioaddr + EMAC_BASIC_CTL1); writel(v | 0x01, priv->ioaddr + EMAC_BASIC_CTL1); - /* The timeout was previoulsy set to 10ms, but some board (OrangePI0) + /* The timeout was previously set to 10ms, but some board (OrangePI0) * need more if no cable plugged. 100ms seems OK */ err = readl_poll_timeout(priv->ioaddr + EMAC_BASIC_CTL1, v, @@ -821,7 +821,7 @@ static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv) return ret; } - /* Make sure the EPHY is properly reseted, as U-Boot may leave + /* Make sure the EPHY is properly reset, as U-Boot may leave * it at deasserted state, and thus it may fail to reset EMAC. * * This assumes the driver has exclusive access to the EPHY reset. diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h index b3135df0a359cd5ea36db325c4a37075991b6712..9fe639fb06bb3f61179e967b663927cce50ff3ca 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000.h @@ -152,7 +152,7 @@ enum inter_frame_gap { /*--- DMA BLOCK defines ---*/ /* DMA Bus Mode register defines */ -/* Programmable burst length (passed thorugh platform)*/ +/* Programmable burst length (passed through platform)*/ #define DMA_BUS_MODE_PBL_MASK GENMASK(13, 8) /* Programmable Burst Len */ #define DMA_BUS_MODE_ATDS 0x00000080 /* Alternate Descriptor Size */ diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c index 4efe4c3ae5dcc53a7b9826f3e2b1bd54f6e256c4..db4fbe64a38afc3142bc2fd4ed9b53230c05031b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c @@ -108,7 +108,7 @@ static void dwmac100_set_filter(struct mac_device_info *hw, memset(mc_filter, 0, sizeof(mc_filter)); netdev_for_each_mc_addr(ha, dev) { /* The upper 6 bits of the calculated CRC are used to - * index the contens of the hash table + * index the contents of the hash table */ int bit_nr = ether_crc(ETH_ALEN, ha->addr) >> 26; /* The most significant bit determines the register to diff --git a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c index d571241e64dd929536aa3158f352a281d9b1834b..8f6993c8bcae5be7fd064a5b1259901b4f643747 100644 --- a/drivers/net/ethernet/stmicro/stmmac/enh_desc.c +++ b/drivers/net/ethernet/stmicro/stmmac/enh_desc.c @@ -88,7 +88,7 @@ static int enh_desc_coe_rdes0(int ipc_err, int type, int payload_err) /* bits 5 7 0 | Frame status * ---------------------------------------------------------- - * 0 0 0 | IEEE 802.3 Type frame (length < 1536 octects) + * 0 0 0 | IEEE 802.3 Type frame (length < 1536 octets) * 1 0 0 | IPv4/6 No CSUM errorS. * 1 0 1 | IPv4/6 CSUM PAYLOAD error * 1 1 0 | IPv4/6 CSUM IP HR error diff --git a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c index 0fab842902a850022a3be368d4972e4f4e9bcdc9..1b3b114e7bec86971c99e219db213eb11c022ebc 100644 --- a/drivers/net/ethernet/stmicro/stmmac/mmc_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/mmc_core.c @@ -252,7 +252,7 @@ static void dwmac_mmc_intr_all_mask(void __iomem *mmcaddr) writel(MMC_DEFAULT_MASK, mmcaddr + MMC_RX_IPC_INTR_MASK); } -/* This reads the MAC core counters (if actaully supported). +/* This reads the MAC core counters (if actually supported). * by default the MMC core is programmed to reset each * counter after a read. So all the field of the mmc struct * have to be incremented. @@ -420,7 +420,7 @@ static void dwxgmac_read_mmc_reg(void __iomem *addr, u32 reg, u32 *dest) *dest = *dest + tmp; } -/* This reads the MAC core counters (if actaully supported). +/* This reads the MAC core counters (if actually supported). * by default the MMC core is programmed to reset each * counter after a read. So all the field of the mmc struct * have to be incremented. diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c index bb110124f21e2d89493359374a33446178a80496..b9a985fa772c993a7b00c27046f4a9555e60e461 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_hwtstamp.c @@ -43,7 +43,7 @@ static void config_sub_second_increment(void __iomem *ioaddr, unsigned long data; u32 reg_value; - /* For GMAC3.x, 4.x versions, in "fine adjustement mode" set sub-second + /* For GMAC3.x, 4.x versions, in "fine adjustment mode" set sub-second * increment to twice the number of nanoseconds of a clock cycle. * The calculation of the default_addend value by the caller will set it * to mid-range = 2^31 when the remainder of this division is zero, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 347a0078f622277a9792cce3ad6f1719d168c040..268289a324f3c3b697f6232353d8a96c65d94f61 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -1114,7 +1114,7 @@ static int stmmac_mac_enable_tx_lpi(struct phylink_config *config, u32 timer, stmmac_set_eee_timer(priv, priv->hw, STMMAC_DEFAULT_LIT_LS, STMMAC_DEFAULT_TWT_LS); - /* Try to cnfigure the hardware timer. */ + /* Try to configure the hardware timer. */ ret = stmmac_set_lpi_mode(priv, priv->hw, STMMAC_LPI_TIMER, priv->tx_lpi_clk_stop, priv->tx_lpi_timer); @@ -3495,7 +3495,7 @@ static void stmmac_mac_config_rss(struct stmmac_priv *priv) /** * stmmac_mtl_configuration - Configure MTL * @priv: driver private structure - * Description: It is used for configurring MTL + * Description: It is used for configuring MTL */ static void stmmac_mtl_configuration(struct stmmac_priv *priv) { @@ -4373,7 +4373,7 @@ static netdev_tx_t stmmac_tso_xmit(struct sk_buff *skb, struct net_device *dev) /* Always insert VLAN tag to SKB payload for TSO frames. * - * Never insert VLAN tag by HW, since segments splited by + * Never insert VLAN tag by HW, since segments split by * TSO engine will be un-tagged by mistake. */ if (skb_vlan_tag_present(skb)) { @@ -5946,7 +5946,7 @@ static int stmmac_napi_poll_rxtx(struct napi_struct *napi, int budget) unsigned long flags; spin_lock_irqsave(&ch->lock, flags); - /* Both RX and TX work done are compelte, + /* Both RX and TX work done are complete, * so enable both RX & TX IRQs. */ stmmac_enable_dma_irq(priv, priv->ioaddr, chan, 1, 1); @@ -6278,7 +6278,7 @@ static irqreturn_t stmmac_msi_intr_rx(int irq, void *data) /** * stmmac_ioctl - Entry point for the Ioctl * @dev: Device pointer. - * @rq: An IOCTL specefic structure, that can contain a pointer to + * @rq: An IOCTL specific structure, that can contain a pointer to * a proprietary structure used to pass information to the driver. * @cmd: IOCTL command * Description: diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c index 1e82850f2a25c33dffafa2fd3fb77a04852e9ace..a7c2496b39f286699da5395ec7e468ca84feaa62 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_mdio.c @@ -483,7 +483,7 @@ void stmmac_pcs_clean(struct net_device *ndev) * If a specific clk_csr value is passed from the platform * this means that the CSR Clock Range selection cannot be * changed at run-time and it is fixed (as reported in the driver - * documentation). Viceversa the driver will try to set the MDC + * documentation). Vice versa the driver will try to set the MDC * clock dynamically according to the actual clock input. */ static u32 stmmac_clk_csr_set(struct stmmac_priv *priv) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c index e90a2c469b9a6f576c1b6f99954af08bae69007c..08b60b7d5fd641846ec1c31cca332833771a991c 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_selftests.c @@ -2000,7 +2000,7 @@ void stmmac_selftest_run(struct net_device *dev, } /* - * First tests will always be MAC / PHY loobpack. If any of + * First tests will always be MAC / PHY loopback. If any of * them is not supported we abort earlier. */ if (ret) {