RFC 8622 [1] updates RFC 8325 [2] and recommends to map Low-Priority Data marked with the Lower Effort DSCP (LE, 000001, 1) to User Priority 1 and AC_BK (Background), the same as the legacy CS1 marking. cfg80211_classify8021d() takes the three most significant bits of the DSCP as User Priority and corrects some DSCP values in a switch statement afterwards. LE is not handled there. For LE the DS field without the ECN bits is 0x04, so: ret = dscp >> 5; /* 0x04 >> 5 = 0 */ switch (dscp >> 2) /* 0x04 >> 2 = 1, no case for 1 */ As a result, LE ends up in User Priority 0 and AC_BE (Best Effort) instead of User Priority 1 and AC_BK. Add a case for LE to the switch statement. OpenWrt already sets a QoS Map by default that maps LE to User Priority 1 [3]. [1] https://www.rfc-editor.org/rfc/rfc8622#section-11 [2] https://www.rfc-editor.org/rfc/rfc8325#section-4.2.10 [3] https://github.com/openwrt/openwrt/commit/a5e3def18224 Fixes: 6fdb8b8781d5 ("wifi: cfg80211: Update the default DSCP-to-UP mapping") Assisted-by: Claude:claude-opus-5-5 Signed-off-by: Nick Hainke --- net/wireless/util.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/wireless/util.c b/net/wireless/util.c index 59912f4a93c8..3f8648b94179 100644 --- a/net/wireless/util.c +++ b/net/wireless/util.c @@ -1154,13 +1154,17 @@ unsigned int cfg80211_classify8021d(struct sk_buff *skb, * value. See section 4 in RFC8325. Specifically, for the following * Diffserv Service Classes no update is needed: * - Standard: DF - * - Low Priority Data: CS1 + * - Low Priority Data: CS1 (legacy) * - Multimedia Conferencing: AF41, AF42, AF43 * - Network Control Traffic: CS7 * - Real-Time Interactive: CS4 * - Signaling: CS5 */ switch (dscp >> 2) { + case 1: + /* Low Priority Data: LE, see section 11 in RFC8622 */ + ret = 1; + break; case 10: case 12: case 14: -- 2.56.0