On Monday, December 1, 2025 7:47:46 PM CET Rafael J. Wysocki wrote: > On Mon, Dec 1, 2025 at 10:46 AM YangYang wrote: [cut] > If blk_queue_enter() or __bio_queue_enter() is allowed to race with > disabling runtime PM for q->dev, failure to resume q->dev is alway > possible and there are no changes that can be made to > pm_runtime_disable() to prevent that from happening. If > __pm_runtime_disable() wins the race, it will increment > power.disable_depth and rpm_resume() will bail out when it sees that > no matter what. > > You should not conflate "runtime PM doesn't work when it is disabled" > with "asynchronous runtime PM doesn't work after freezing the PM > workqueue". They are both true, but they are not the same. So I've been testing the patch below for a few days and it will eliminate the latter, but even after this patch runtime PM will be disabled in device_suspend_late() and if the problem you are facing is still there after this patch, it will need to dealt with at the driver level. Generally speaking, driver involvement is needed to make runtime PM and system suspend/resume work together in the majority of cases. --- From: Rafael J. Wysocki Subject: Till now, the runtime PM workqueue has been flagged as freezable, so it does not process work items during system-wide PM transitions like system suspend and resume. The original reason to do that was to reduce the likelihood of runtime PM getting in the way of system-wide PM processing, but now it is mostly an optimization because (1) runtime suspend of devices is prevented by bumping up their runtime PM usage counters in device_prepare() and (2) device drivers are expected to disable runtime PM for the devices handled by them before they embark on system-wide PM activities that may change the state of the hardware or otherwise interfere with runtime PM. However, it prevents asynchronous runtime resume of devices from working during system-wide PM transitions, which is confusing because synchronous runtime resume is not prevented at the same time, and it also sometimes turns out to be problematic. For example, it has been reported that blk_queue_enter() may deadlock during a system suspend transition because of the pm_request_resume() usage in it [1]. That happens because the asynchronous runtime resume of the given device is not processed due to the freezing of the runtime PM workqueue. While it may be better to address this particular issue in the block layer, the very presence of it means that similar problems may be expected to occur elsewhere. For this reason, remove the WQ_FREEZABLE flag from the runtime PM workqueue and make device_suspend_late() use the generic variant of pm_runtime_disable() that will carry out runtime PM of the device synchronously if there is pending resume work for it. Also update the comment before the pm_runtime_disable() call in device_suspend_late() to document the fact that the runtime PM should not be expected to work for the device until the end of device_resume_early(). This change may, even though it is not expected to, uncover some latent issues related to queuing up asynchronous runtime resume work items during system suspend or hibernation. However, they should be limited to the interference between runtime resume and system-wide PM callbacks in the cases when device drivers start to handle system-wide PM before disabling runtime PM as described above. Link: https://lore.kernel.org/linux-pm/20251126101636.205505-2-yang.yang@vivo.com/ Signed-off-by: Rafael J. Wysocki --- drivers/base/power/main.c | 7 ++++--- kernel/power/main.c | 2 +- 2 files changed, 5 insertions(+), 4 deletions(-) --- a/drivers/base/power/main.c +++ b/drivers/base/power/main.c @@ -1647,10 +1647,11 @@ static void device_suspend_late(struct d goto Complete; /* - * Disable runtime PM for the device without checking if there is a - * pending resume request for it. + * After this point, any runtime PM operations targeting the device + * will fail until the corresponding pm_runtime_enable() call in + * device_resume_early(). */ - __pm_runtime_disable(dev, false); + pm_runtime_disable(dev); if (dev->power.syscore) goto Skip; --- a/kernel/power/main.c +++ b/kernel/power/main.c @@ -1125,7 +1125,7 @@ EXPORT_SYMBOL_GPL(pm_wq); static int __init pm_start_workqueues(void) { - pm_wq = alloc_workqueue("pm", WQ_FREEZABLE | WQ_UNBOUND, 0); + pm_wq = alloc_workqueue("pm", WQ_UNBOUND, 0); if (!pm_wq) return -ENOMEM;