Add phy_can_wakeup() to report whether the PHY driver has marked the
PHY device as being wake-up capable as far as the driver model is
concerned.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 include/linux/phy.h | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/include/linux/phy.h b/include/linux/phy.h
index 3c7634482356..3eeeaec52832 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1379,6 +1379,18 @@ static inline void phy_disable_eee_mode(struct phy_device *phydev, u32 link_mode
 	linkmode_clear_bit(link_mode, phydev->advertising_eee);
 }
 
+/**
+ * phy_can_wakeup() - indicate whether PHY has driver model wakeup capabilities
+ * @phydev: The phy_device struct
+ *
+ * Returns: true/false depending on the PHY driver's device_set_wakeup_capable()
+ * setting.
+ */
+static inline bool phy_can_wakeup(struct phy_device *phydev)
+{
+	return device_can_wakeup(&phydev->mdio.dev);
+}
+
 void phy_resolve_aneg_pause(struct phy_device *phydev);
 void phy_resolve_aneg_linkmode(struct phy_device *phydev);
 
-- 
2.47.3

Add phy_may_wakeup() which uses the driver model's device_may_wakeup()
when the PHY driver has marked the device as wakeup capable in the
driver model, otherwise use phy_drv_wol_enabled().

Replace the sites that used to call phy_drv_wol_enabled() with this
as checking the driver model will be more efficient than checking the
WoL state.

Export phy_may_wakeup() so that phylink can use it.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phy_device.c | 14 ++++++++++++--
 include/linux/phy.h          |  9 +++++++++
 2 files changed, 21 insertions(+), 2 deletions(-)

diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index 7a67c900e79a..b7feaf0cb1df 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -251,6 +251,16 @@ static bool phy_drv_wol_enabled(struct phy_device *phydev)
 	return wol.wolopts != 0;
 }
 
+bool phy_may_wakeup(struct phy_device *phydev)
+{
+	/* If the PHY is using driver-model based wakeup, use that state. */
+	if (phy_can_wakeup(phydev))
+		return device_may_wakeup(&phydev->mdio.dev);
+
+	return phy_drv_wol_enabled(phydev);
+}
+EXPORT_SYMBOL_GPL(phy_may_wakeup);
+
 static void phy_link_change(struct phy_device *phydev, bool up)
 {
 	struct net_device *netdev = phydev->attached_dev;
@@ -302,7 +312,7 @@ static bool mdio_bus_phy_may_suspend(struct phy_device *phydev)
 	/* If the PHY on the mido bus is not attached but has WOL enabled
 	 * we cannot suspend the PHY.
 	 */
-	if (!netdev && phy_drv_wol_enabled(phydev))
+	if (!netdev && phy_may_wakeup(phydev))
 		return false;
 
 	/* PHY not attached? May suspend if the PHY has not already been
@@ -1909,7 +1919,7 @@ int phy_suspend(struct phy_device *phydev)
 	if (phydev->suspended || !phydrv)
 		return 0;
 
-	phydev->wol_enabled = phy_drv_wol_enabled(phydev) ||
+	phydev->wol_enabled = phy_may_wakeup(phydev) ||
 			      (netdev && netdev->ethtool->wol_enabled);
 	/* If the device has WOL enabled, we cannot suspend the PHY */
 	if (phydev->wol_enabled && !(phydrv->flags & PHY_ALWAYS_CALL_SUSPEND))
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 3eeeaec52832..801356da1fb2 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1391,6 +1391,15 @@ static inline bool phy_can_wakeup(struct phy_device *phydev)
 	return device_can_wakeup(&phydev->mdio.dev);
 }
 
+/**
+ * phy_may_wakeup() - indicate whether PHY has driver model wakeup is enabled
+ * @phydev: The phy_device struct
+ *
+ * Returns: true/false depending on the PHY driver's device_set_wakeup_enabled()
+ * setting.
+ */
+bool phy_may_wakeup(struct phy_device *phydev);
+
 void phy_resolve_aneg_pause(struct phy_device *phydev);
 void phy_resolve_aneg_linkmode(struct phy_device *phydev);
 
-- 
2.47.3

Add core phylink managed Wake-on-Lan support, which is enabled when the
MAC driver fills in the new .mac_wol_set() method that this commit
creates.

When this feature is disabled, phylink acts as it has in the past,
merely passing the ethtool WoL calls to phylib whenever a PHY exists.
No other new functionality provided by this commit is enabled.

When this feature is enabled, a more inteligent approach is used.
Phylink will first pass WoL options to the PHY, read them back, and
attempt to set any options that were not set at the PHY at the MAC.

Since we have PHY drivers that report they support WoL, and accept WoL
configuration even though they aren't wired up to be capable of waking
the system, we need a way to differentiate between PHYs that think
they support WoL and those which actually do. As PHY drivers do not
make use of the driver model's wake-up infrastructure, but could, we
use this to determine whether PHY drivers can participate. This gives
a path forward where, as MAC drivers are converted to this, it
encourages PHY drivers to also be converted.

Phylink will also ignore the mac_wol argument to phylink_suspend() as
it now knows the WoL state at the MAC.

MAC drivers are expected to record/configure the Wake-on-Lan state in
their .mac_set_wol() method, and deal appropriately with it in their
suspend/resume methods. The driver model provides assistance to set the
IRQ wake support which may assist driver authors in achieving the
necessary configuration.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 80 +++++++++++++++++++++++++++++++++++++--
 include/linux/phylink.h   | 26 +++++++++++++
 2 files changed, 102 insertions(+), 4 deletions(-)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 9d7799ea1c17..939438a6d6f5 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -93,6 +93,9 @@ struct phylink {
 	u8 sfp_port;
 
 	struct eee_config eee_cfg;
+
+	u32 wolopts_mac;
+	u8 wol_sopass[SOPASS_MAX];
 };
 
 #define phylink_printk(level, pl, fmt, ...) \
@@ -2562,6 +2565,17 @@ void phylink_rx_clk_stop_unblock(struct phylink *pl)
 }
 EXPORT_SYMBOL_GPL(phylink_rx_clk_stop_unblock);
 
+static bool phylink_mac_supports_wol(struct phylink *pl)
+{
+	return !!pl->mac_ops->mac_wol_set;
+}
+
+static bool phylink_phy_supports_wol(struct phylink *pl,
+				     struct phy_device *phydev)
+{
+	return phydev && (pl->config->wol_phy_legacy || phy_can_wakeup(phydev));
+}
+
 /**
  * phylink_suspend() - handle a network device suspend event
  * @pl: a pointer to a &struct phylink returned from phylink_create()
@@ -2575,11 +2589,17 @@ EXPORT_SYMBOL_GPL(phylink_rx_clk_stop_unblock);
  *   can also bring down the link between the MAC and PHY.
  * - If Wake-on-Lan is active, but being handled by the MAC, the MAC
  *   still needs to receive packets, so we can not bring the link down.
+ *
+ * Note: when phylink managed Wake-on-Lan is in use, @mac_wol is ignored.
+ * (struct phylink_mac_ops.mac_set_wol populated.)
  */
 void phylink_suspend(struct phylink *pl, bool mac_wol)
 {
 	ASSERT_RTNL();
 
+	if (phylink_mac_supports_wol(pl))
+		mac_wol = !!pl->wolopts_mac;
+
 	if (mac_wol && (!pl->netdev || pl->netdev->ethtool->wol_enabled)) {
 		/* Wake-on-Lan enabled, MAC handling */
 		mutex_lock(&pl->state_mutex);
@@ -2689,8 +2709,24 @@ void phylink_ethtool_get_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
 	wol->supported = 0;
 	wol->wolopts = 0;
 
-	if (pl->phydev)
-		phy_ethtool_get_wol(pl->phydev, wol);
+	if (phylink_mac_supports_wol(pl)) {
+		if (phylink_phy_supports_wol(pl, pl->phydev))
+			phy_ethtool_get_wol(pl->phydev, wol);
+
+		/* Where the MAC augments the WoL support, merge its support and
+		 * current configuration.
+		 */
+		if (~wol->wolopts & pl->wolopts_mac & WAKE_MAGICSECURE)
+			memcpy(wol->sopass, pl->wol_sopass,
+			       sizeof(wol->sopass));
+
+		wol->supported |= pl->config->wol_mac_support;
+		wol->wolopts |= pl->wolopts_mac;
+	} else {
+		/* Legacy */
+		if (pl->phydev)
+			phy_ethtool_get_wol(pl->phydev, wol);
+	}
 }
 EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol);
 
@@ -2707,12 +2743,48 @@ EXPORT_SYMBOL_GPL(phylink_ethtool_get_wol);
  */
 int phylink_ethtool_set_wol(struct phylink *pl, struct ethtool_wolinfo *wol)
 {
+	struct ethtool_wolinfo w;
 	int ret = -EOPNOTSUPP;
+	bool changed;
+	u32 wolopts;
 
 	ASSERT_RTNL();
 
-	if (pl->phydev)
-		ret = phy_ethtool_set_wol(pl->phydev, wol);
+	if (phylink_mac_supports_wol(pl)) {
+		wolopts = wol->wolopts;
+
+		if (phylink_phy_supports_wol(pl, pl->phydev)) {
+			ret = phy_ethtool_set_wol(pl->phydev, wol);
+			if (ret != 0 && ret != -EOPNOTSUPP)
+				return ret;
+
+			phy_ethtool_get_wol(pl->phydev, &w);
+
+			/* Any Wake-on-Lan modes which the PHY is handling
+			 * should not be passed on to the MAC.
+			 */
+			wolopts &= ~w.wolopts;
+		}
+
+		wolopts &= pl->config->wol_mac_support;
+		changed = pl->wolopts_mac != wolopts;
+		if (wolopts & WAKE_MAGICSECURE)
+			changed |= !!memcmp(wol->sopass, pl->wol_sopass,
+					    sizeof(wol->sopass));
+		memcpy(pl->wol_sopass, wol->sopass, sizeof(pl->wol_sopass));
+
+		if (changed) {
+			ret = pl->mac_ops->mac_wol_set(pl->config, wolopts,
+						       wol->sopass);
+			if (!ret)
+				pl->wolopts_mac = wolopts;
+		} else {
+			ret = 0;
+		}
+	} else {
+		if (pl->phydev)
+			ret = phy_ethtool_set_wol(pl->phydev, wol);
+	}
 
 	return ret;
 }
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 9af0411761d7..59cb58b29d1d 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -156,6 +156,8 @@ enum phylink_op_type {
  * @lpi_capabilities: MAC speeds which can support LPI signalling
  * @lpi_timer_default: Default EEE LPI timer setting.
  * @eee_enabled_default: If set, EEE will be enabled by phylink at creation time
+ * @wol_phy_legacy: Use Wake-on-Lan with PHY even if phy_can_wakeup() is false
+ * @wol_mac_support: Bitmask of MAC supported %WAKE_* options
  */
 struct phylink_config {
 	struct device *dev;
@@ -173,6 +175,10 @@ struct phylink_config {
 	unsigned long lpi_capabilities;
 	u32 lpi_timer_default;
 	bool eee_enabled_default;
+
+	/* Wake-on-Lan support */
+	bool wol_phy_legacy;
+	u32 wol_mac_support;
 };
 
 void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed);
@@ -188,6 +194,7 @@ void phylink_limit_mac_speed(struct phylink_config *config, u32 max_speed);
  * @mac_link_up: allow the link to come up.
  * @mac_disable_tx_lpi: disable LPI.
  * @mac_enable_tx_lpi: enable and configure LPI.
+ * @mac_wol_set: configure Wake-on-Lan settings at the MAC.
  *
  * The individual methods are described more fully below.
  */
@@ -211,6 +218,9 @@ struct phylink_mac_ops {
 	void (*mac_disable_tx_lpi)(struct phylink_config *config);
 	int (*mac_enable_tx_lpi)(struct phylink_config *config, u32 timer,
 				 bool tx_clk_stop);
+
+	int (*mac_wol_set)(struct phylink_config *config, u32 wolopts,
+			   const u8 *sopass);
 };
 
 #if 0 /* For kernel-doc purposes only. */
@@ -440,6 +450,22 @@ void mac_disable_tx_lpi(struct phylink_config *config);
  */
 int mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
 		      bool tx_clk_stop);
+
+/**
+ * mac_wol_set() - configure the Wake-on-Lan parameters
+ * @config: a pointer to a &struct phylink_config.
+ * @wolopts: Bitmask of %WAKE_* flags for enabled Wake-On-Lan modes.
+ * @sopass: SecureOn(tm) password; meaningful only for %WAKE_MAGICSECURE
+ *
+ * Enable the specified Wake-on-Lan options at the MAC. Options that the
+ * PHY can handle will have been removed from @wolopts.
+ *
+ * The presence of this method enables phylink-managed WoL support.
+ *
+ * Returns: 0 on success.
+ */
+int (*mac_wol_set)(struct phylink_config *config, u32 wolopts,
+		   const u8 *sopass);
 #endif
 
 struct phylink_pcs_ops;
-- 
2.47.3

Some drivers, e.g. stmmac, use the speed_up()/speed_down() APIs to
gain additional power saving during Wake-on-LAN where the PHY is
managing the state.

Add support to phylink for this, which can be enabled by the MAC
driver. Only change the PHY speed if the PHY is configured for
wake-up, but without any wake-up on the MAC side, as MAC side
means changing the configuration once the negotiation has
completed.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/phy/phylink.c | 12 ++++++++++++
 include/linux/phylink.h   |  2 ++
 2 files changed, 14 insertions(+)

diff --git a/drivers/net/phy/phylink.c b/drivers/net/phy/phylink.c
index 939438a6d6f5..26bd4b7619dd 100644
--- a/drivers/net/phy/phylink.c
+++ b/drivers/net/phy/phylink.c
@@ -2576,6 +2576,12 @@ static bool phylink_phy_supports_wol(struct phylink *pl,
 	return phydev && (pl->config->wol_phy_legacy || phy_can_wakeup(phydev));
 }
 
+static bool phylink_phy_pm_speed_ctrl(struct phylink *pl)
+{
+	return pl->config->wol_phy_speed_ctrl && !pl->wolopts_mac &&
+	       pl->phydev && phy_may_wakeup(pl->phydev);
+}
+
 /**
  * phylink_suspend() - handle a network device suspend event
  * @pl: a pointer to a &struct phylink returned from phylink_create()
@@ -2625,6 +2631,9 @@ void phylink_suspend(struct phylink *pl, bool mac_wol)
 	} else {
 		phylink_stop(pl);
 	}
+
+	if (phylink_phy_pm_speed_ctrl(pl))
+		phy_speed_down(pl->phydev, false);
 }
 EXPORT_SYMBOL_GPL(phylink_suspend);
 
@@ -2664,6 +2673,9 @@ void phylink_resume(struct phylink *pl)
 {
 	ASSERT_RTNL();
 
+	if (phylink_phy_pm_speed_ctrl(pl))
+		phy_speed_up(pl->phydev);
+
 	if (test_bit(PHYLINK_DISABLE_MAC_WOL, &pl->phylink_disable_state)) {
 		/* Wake-on-Lan enabled, MAC handling */
 
diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 59cb58b29d1d..38363e566ac3 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -157,6 +157,7 @@ enum phylink_op_type {
  * @lpi_timer_default: Default EEE LPI timer setting.
  * @eee_enabled_default: If set, EEE will be enabled by phylink at creation time
  * @wol_phy_legacy: Use Wake-on-Lan with PHY even if phy_can_wakeup() is false
+ * @wol_phy_speed_ctrl: Use phy speed control on suspend/resume
  * @wol_mac_support: Bitmask of MAC supported %WAKE_* options
  */
 struct phylink_config {
@@ -178,6 +179,7 @@ struct phylink_config {
 
 	/* Wake-on-Lan support */
 	bool wol_phy_legacy;
+	bool wol_phy_speed_ctrl;
 	u32 wol_mac_support;
 };
 
-- 
2.47.3

Convert stmmac to use phylink-managed Wake-on-Lan support. To achieve
this, we implement the .mac_wol_set() method, which simply configures
the driver model's struct device wakeup for stmmac, and sets the
priv->wolopts appropriately.

When STMMAC_FLAG_USE_PHY_WOL is set, in the stmmac world this means to
only use the PHY's WoL support and ignore the MAC's WoL capabilities.
To preserve this behaviour, we enable phylink's legacy mode, and avoid
telling phylink that the MAC has any WoL support. This achieves the
same functionality for this case.

When STMMAC_FLAG_USE_PHY_WOL is not set, we provide the MAC's WoL
capabilities to phylink, which then allows phylink to choose between
the PHY and MAC for WoL depending on their individual capabilities
as described in the phylink commit. This only augments the WoL
functionality with PHYs that declare to the driver model that they are
wake-up capable. Currently, very few PHY drivers support this.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h  |  6 +---
 .../ethernet/stmicro/stmmac/stmmac_ethtool.c  | 34 ++++---------------
 .../net/ethernet/stmicro/stmmac/stmmac_main.c | 30 ++++++++++++++--
 .../ethernet/stmicro/stmmac/stmmac_platform.c |  4 +--
 4 files changed, 36 insertions(+), 38 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index ec8bddc1c37f..f5628a6af7d3 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -287,6 +287,7 @@ struct stmmac_priv {
 	int hw_cap_support;
 	int synopsys_id;
 	u32 msg_enable;
+	/* Our MAC Wake-on-Lan options */
 	int wolopts;
 	int wol_irq;
 	u32 gmii_address_bus_config;
@@ -375,11 +376,6 @@ enum stmmac_state {
 
 extern const struct dev_pm_ops stmmac_simple_pm_ops;
 
-static inline bool stmmac_wol_enabled_mac(struct stmmac_priv *priv)
-{
-	return priv->plat->pmt && device_may_wakeup(priv->device);
-}
-
 static inline bool stmmac_wol_enabled_phy(struct stmmac_priv *priv)
 {
 	return !priv->plat->pmt && device_may_wakeup(priv->device);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index 39fa1ec92f82..fd29b551a082 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -787,41 +787,19 @@ static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
 
-	if (!priv->plat->pmt)
-		return phylink_ethtool_get_wol(priv->phylink, wol);
-
-	mutex_lock(&priv->lock);
-	if (device_can_wakeup(priv->device)) {
-		wol->supported = WAKE_MAGIC | WAKE_UCAST;
-		if (priv->hw_cap_support && !priv->dma_cap.pmt_magic_frame)
-			wol->supported &= ~WAKE_MAGIC;
-		wol->wolopts = priv->wolopts;
-	}
-	mutex_unlock(&priv->lock);
+	return phylink_ethtool_get_wol(priv->phylink, wol);
 }
 
 static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
+	int ret;
 
-	if (!device_can_wakeup(priv->device))
-		return -EOPNOTSUPP;
-
-	if (!priv->plat->pmt) {
-		int ret = phylink_ethtool_set_wol(priv->phylink, wol);
-
-		if (!ret)
-			device_set_wakeup_enable(priv->device, !!wol->wolopts);
-		return ret;
-	}
-
-	device_set_wakeup_enable(priv->device, !!wol->wolopts);
+	ret = phylink_ethtool_set_wol(priv->phylink, wol);
+	if (!ret)
+		device_set_wakeup_enable(priv->device, !!wol->wolopts);
 
-	mutex_lock(&priv->lock);
-	priv->wolopts = wol->wolopts;
-	mutex_unlock(&priv->lock);
-
-	return 0;
+	return ret;
 }
 
 static int stmmac_ethtool_op_get_eee(struct net_device *dev,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index c9fa965c8566..a959a4949282 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1065,6 +1065,20 @@ static int stmmac_mac_enable_tx_lpi(struct phylink_config *config, u32 timer,
 	return 0;
 }
 
+static int stmmac_mac_wol_set(struct phylink_config *config, u32 wolopts,
+			      const u8 *sopass)
+{
+	struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
+
+	device_set_wakeup_enable(priv->device, !!wolopts);
+
+	mutex_lock(&priv->lock);
+	priv->wolopts = wolopts;
+	mutex_unlock(&priv->lock);
+
+	return 0;
+}
+
 static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
 	.mac_get_caps = stmmac_mac_get_caps,
 	.mac_select_pcs = stmmac_mac_select_pcs,
@@ -1074,6 +1088,7 @@ static const struct phylink_mac_ops stmmac_phylink_mac_ops = {
 	.mac_link_up = stmmac_mac_link_up,
 	.mac_disable_tx_lpi = stmmac_mac_disable_tx_lpi,
 	.mac_enable_tx_lpi = stmmac_mac_enable_tx_lpi,
+	.mac_wol_set = stmmac_mac_wol_set,
 };
 
 /**
@@ -1250,6 +1265,15 @@ static int stmmac_phylink_setup(struct stmmac_priv *priv)
 		config->eee_enabled_default = true;
 	}
 
+	if (priv->plat->flags & STMMAC_FLAG_USE_PHY_WOL) {
+		config->wol_phy_legacy = true;
+	} else {
+		if (priv->dma_cap.pmt_remote_wake_up)
+			config->wol_mac_support |= WAKE_UCAST;
+		if (priv->dma_cap.pmt_magic_frame)
+			config->wol_mac_support |= WAKE_MAGIC;
+	}
+
 	fwnode = priv->plat->port_node;
 	if (!fwnode)
 		fwnode = dev_fwnode(priv->device);
@@ -7760,7 +7784,7 @@ int stmmac_suspend(struct device *dev)
 		priv->plat->serdes_powerdown(ndev, priv->plat->bsp_priv);
 
 	/* Enable Power down mode by programming the PMT regs */
-	if (stmmac_wol_enabled_mac(priv)) {
+	if (priv->wolopts) {
 		stmmac_pmt(priv, priv->hw, priv->wolopts);
 		priv->irq_wake = 1;
 	} else {
@@ -7774,7 +7798,7 @@ int stmmac_suspend(struct device *dev)
 	if (stmmac_wol_enabled_phy(priv))
 		phylink_speed_down(priv->phylink, false);
 
-	phylink_suspend(priv->phylink, stmmac_wol_enabled_mac(priv));
+	phylink_suspend(priv->phylink, !!priv->wolopts);
 	rtnl_unlock();
 
 	if (stmmac_fpe_supported(priv))
@@ -7850,7 +7874,7 @@ int stmmac_resume(struct device *dev)
 	 * this bit because it can generate problems while resuming
 	 * from another devices (e.g. serial console).
 	 */
-	if (stmmac_wol_enabled_mac(priv)) {
+	if (priv->wolopts) {
 		mutex_lock(&priv->lock);
 		stmmac_pmt(priv, priv->hw, 0);
 		mutex_unlock(&priv->lock);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
index 27bcaae07a7f..ed38925eb6f6 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c
@@ -970,7 +970,7 @@ static int __maybe_unused stmmac_pltfr_noirq_suspend(struct device *dev)
 	if (!netif_running(ndev))
 		return 0;
 
-	if (!stmmac_wol_enabled_mac(priv)) {
+	if (!priv->wolopts) {
 		/* Disable clock in case of PWM is off */
 		clk_disable_unprepare(priv->plat->clk_ptp_ref);
 
@@ -991,7 +991,7 @@ static int __maybe_unused stmmac_pltfr_noirq_resume(struct device *dev)
 	if (!netif_running(ndev))
 		return 0;
 
-	if (!stmmac_wol_enabled_mac(priv)) {
+	if (!priv->wolopts) {
 		/* enable the clk previously disabled */
 		ret = pm_runtime_force_resume(dev);
 		if (ret)
-- 
2.47.3

Convert stmmac to use phylink's management of the PHY speed when
Wake-on-Lan is enabled.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/ethernet/stmicro/stmmac/stmmac.h      |  5 -----
 .../net/ethernet/stmicro/stmmac/stmmac_ethtool.c  |  7 +------
 drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 15 +--------------
 3 files changed, 2 insertions(+), 25 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
index f5628a6af7d3..aa8fa180c237 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h
@@ -376,11 +376,6 @@ enum stmmac_state {
 
 extern const struct dev_pm_ops stmmac_simple_pm_ops;
 
-static inline bool stmmac_wol_enabled_phy(struct stmmac_priv *priv)
-{
-	return !priv->plat->pmt && device_may_wakeup(priv->device);
-}
-
 int stmmac_mdio_unregister(struct net_device *ndev);
 int stmmac_mdio_register(struct net_device *ndev);
 int stmmac_mdio_reset(struct mii_bus *mii);
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
index fd29b551a082..7ab736de308f 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c
@@ -793,13 +793,8 @@ static void stmmac_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 static int stmmac_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
 {
 	struct stmmac_priv *priv = netdev_priv(dev);
-	int ret;
 
-	ret = phylink_ethtool_set_wol(priv->phylink, wol);
-	if (!ret)
-		device_set_wakeup_enable(priv->device, !!wol->wolopts);
-
-	return ret;
+	return phylink_ethtool_set_wol(priv->phylink, wol);
 }
 
 static int stmmac_ethtool_op_get_eee(struct net_device *dev,
diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
index a959a4949282..6d0b52d30ac8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
+++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c
@@ -1189,14 +1189,6 @@ static int stmmac_init_phy(struct net_device *dev)
 		phylink_ethtool_set_eee(priv->phylink, &eee);
 	}
 
-	if (!priv->plat->pmt) {
-		struct ethtool_wolinfo wol = { .cmd = ETHTOOL_GWOL };
-
-		phylink_ethtool_get_wol(priv->phylink, &wol);
-		device_set_wakeup_capable(priv->device, !!wol.supported);
-		device_set_wakeup_enable(priv->device, !!wol.wolopts);
-	}
-
 	return 0;
 }
 
@@ -1265,6 +1257,7 @@ static int stmmac_phylink_setup(struct stmmac_priv *priv)
 		config->eee_enabled_default = true;
 	}
 
+	config->wol_phy_speed_ctrl = true;
 	if (priv->plat->flags & STMMAC_FLAG_USE_PHY_WOL) {
 		config->wol_phy_legacy = true;
 	} else {
@@ -7795,9 +7788,6 @@ int stmmac_suspend(struct device *dev)
 	mutex_unlock(&priv->lock);
 
 	rtnl_lock();
-	if (stmmac_wol_enabled_phy(priv))
-		phylink_speed_down(priv->phylink, false);
-
 	phylink_suspend(priv->phylink, !!priv->wolopts);
 	rtnl_unlock();
 
@@ -7936,9 +7926,6 @@ int stmmac_resume(struct device *dev)
 	 * workqueue thread, which will race with initialisation.
 	 */
 	phylink_resume(priv->phylink);
-	if (stmmac_wol_enabled_phy(priv))
-		phylink_speed_up(priv->phylink);
-
 	rtnl_unlock();
 
 	netif_device_attach(ndev);
-- 
2.47.3