Add device tree binding for the Radxa AirBox Q900 board based on the Qualcomm QCS9075 SoC. Signed-off-by: Mecid Urganci --- Documentation/devicetree/bindings/arm/qcom.yaml | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 8c3df8efaa4d..2c492f4d784a 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -909,6 +909,12 @@ properties: - qcom,sa8775p-ride-r3 - const: qcom,sa8775p + - items: + - enum: + - radxa,airbox-q900 + - const: qcom,qcs9075 + - const: qcom,sa8775p + - items: - enum: - qcom,lemans-evk -- 2.47.3 Add device tree support for the Radxa AirBox Q900 board based on the Qualcomm QCS9075 SoC (Lemans Family). This board features HDMI 2.0 via dp0, 2x USB 3.1 Gen 2 ports, 2x 2.5GbE Ethernet ports and onboard UFS storage. Further information: https://radxa.com/products/fogwise/airbox-q900/ Functionality has been tested and confirmed working via an Armbian Debian Trixie build. Signed-off-by: Mecid Urganci Made-with: Cursor --- arch/arm64/boot/dts/qcom/Makefile | 1 + .../dts/qcom/qcs9075-radxa-airbox-q900.dts | 1012 +++++++++++++++++ 2 files changed, 1013 insertions(+) create mode 100644 arch/arm64/boot/dts/qcom/qcs9075-radxa-airbox-q900.dts diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index a4dc9e8b2d25..c8b7dd67806d 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -180,6 +180,7 @@ qcs8300-ride-el2-dtbs := qcs8300-ride.dtb monaco-el2.dtbo dtb-$(CONFIG_ARCH_QCOM) += qcs8300-ride-el2.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs8550-aim300-aiot.dtb +dtb-$(CONFIG_ARCH_QCOM) += qcs9075-radxa-airbox-q900.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride.dtb dtb-$(CONFIG_ARCH_QCOM) += qcs9100-ride-r3.dtb diff --git a/arch/arm64/boot/dts/qcom/qcs9075-radxa-airbox-q900.dts b/arch/arm64/boot/dts/qcom/qcs9075-radxa-airbox-q900.dts new file mode 100644 index 000000000000..8b5202b527cb --- /dev/null +++ b/arch/arm64/boot/dts/qcom/qcs9075-radxa-airbox-q900.dts @@ -0,0 +1,1012 @@ +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2026 Mecid Urganci + */ + +/dts-v1/; + +#include +#include +#include + +#include "lemans.dtsi" +#include "lemans-pmics.dtsi" + +/ { + model = "Radxa AIRbox Q900"; + compatible = "radxa,airbox-q900", "qcom,qcs9075", "qcom,sa8775p"; + + aliases { + ethernet0 = ðernet0; + ethernet1 = ðernet1; + i2c15 = &i2c15; + i2c18 = &i2c18; + serial0 = &uart10; + ufshc1 = &ufs_mem_hc; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + vcc_5v0_regulator: vcc-5v0-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_5v0"; + gpio = <&pmm8654au_3_gpios 6 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_5v0_en_state>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + regulator-always-on; + }; + + vcc5v0_usb30_otg_regulator: vcc5v0-usb30-otg-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb30_otg"; + gpio = <&pmm8654au_2_gpios 3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_usb30_otg_en_state>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + regulator-always-on; + }; + + vcc5v0_usb30_regulator: vcc5v0-usb30-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb30"; + gpio = <&pmm8654au_2_gpios 4 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_usb30_en_state>; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + regulator-always-on; + }; + + vcc_3v3_ssd_regulator: vcc-3p3-ssd-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_3v3_ssd"; + gpio = <&pmm8654au_1_gpios 9 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc_3v3_ssd_en_state>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + regulator-always-on; + }; + + vcc3v3_minipcie_regulator: vcc3v3-minipcie-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_minipcie"; + gpio = <&pmm8654au_2_gpios 10 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc3v3_minipcie_en_state>; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + regulator-always-on; + }; + + gpio_leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&status_led_state>, <&power_led_state>; + + status-led { + gpios = <&pmm8654au_1_gpios 11 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + function = LED_FUNCTION_STATUS; + color = ; + }; + + power-led { + gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + function = LED_FUNCTION_POWER; + color = ; + }; + }; + + gpio_keys: gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_keys_default>; + pinctrl-names = "default"; + + power-key { + label = "Power Off"; + gpios = <&tlmm 97 GPIO_ACTIVE_LOW>; + linux,code = ; + wakeup-source; + debounce-interval = <30>; + }; + }; + + fan0: gpio-fan { + compatible = "gpio-fan"; + gpios = <&pmm8654au_1_gpios 12 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0>, <5000 1>; + pinctrl-names = "default"; + pinctrl-0 = <&fan_en_state>; + #cooling-cells = <2>; + }; + + dp0-connector { + compatible = "dp-connector"; + label = "eDP0"; + type = "full-size"; + + port { + dp0_connector_in: endpoint { + remote-endpoint = <&mdss0_dp0_out>; + }; + }; + }; +}; + +&apps_rsc { + regulators-0 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "a"; + + vreg_s4a: smps4 { + regulator-name = "vreg_s4a"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1816000>; + regulator-initial-mode = ; + }; + + vreg_s5a: smps5 { + regulator-name = "vreg_s5a"; + regulator-min-microvolt = <1850000>; + regulator-max-microvolt = <1996000>; + regulator-initial-mode = ; + }; + + vreg_s9a: smps9 { + regulator-name = "vreg_s9a"; + regulator-min-microvolt = <535000>; + regulator-max-microvolt = <1120000>; + regulator-initial-mode = ; + }; + + vreg_l4a: ldo4 { + regulator-name = "vreg_l4a"; + regulator-min-microvolt = <788000>; + regulator-max-microvolt = <1050000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l5a: ldo5 { + regulator-name = "vreg_l5a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6a: ldo6 { + regulator-name = "vreg_l6a"; + regulator-min-microvolt = <870000>; + regulator-max-microvolt = <970000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7a: ldo7 { + regulator-name = "vreg_l7a"; + regulator-min-microvolt = <720000>; + regulator-max-microvolt = <950000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8a: ldo8 { + regulator-name = "vreg_l8a"; + regulator-min-microvolt = <2504000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9a: ldo9 { + regulator-name = "vreg_l9a"; + regulator-min-microvolt = <2970000>; + regulator-max-microvolt = <3544000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-1 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "c"; + + vreg_l1c: ldo1 { + regulator-name = "vreg_l1c"; + regulator-min-microvolt = <1140000>; + regulator-max-microvolt = <1260000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l2c: ldo2 { + regulator-name = "vreg_l2c"; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1100000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l3c: ldo3 { + regulator-name = "vreg_l3c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l4c: ldo4 { + regulator-name = "vreg_l4c"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = ; + /* + * FIXME: This should have regulator-allow-set-load but + * we're getting an over-current fault from the PMIC + * when switching to LPM. + */ + }; + + vreg_l5c: ldo5 { + regulator-name = "vreg_l5c"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1300000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l6c: ldo6 { + regulator-name = "vreg_l6c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <1980000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l7c: ldo7 { + regulator-name = "vreg_l7c"; + regulator-min-microvolt = <1620000>; + regulator-max-microvolt = <2000000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8c: ldo8 { + regulator-name = "vreg_l8c"; + regulator-min-microvolt = <2400000>; + regulator-max-microvolt = <3300000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l9c: ldo9 { + regulator-name = "vreg_l9c"; + regulator-min-microvolt = <1650000>; + regulator-max-microvolt = <2700000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; + + regulators-2 { + compatible = "qcom,pmm8654au-rpmh-regulators"; + qcom,pmic-id = "e"; + + vreg_s4e: smps4 { + regulator-name = "vreg_s4e"; + regulator-min-microvolt = <970000>; + regulator-max-microvolt = <1520000>; + regulator-initial-mode = ; + }; + + vreg_s7e: smps7 { + regulator-name = "vreg_s7e"; + regulator-min-microvolt = <1010000>; + regulator-max-microvolt = <1170000>; + regulator-initial-mode = ; + }; + + vreg_s9e: smps9 { + regulator-name = "vreg_s9e"; + regulator-min-microvolt = <300000>; + regulator-max-microvolt = <570000>; + regulator-initial-mode = ; + }; + + vreg_l6e: ldo6 { + regulator-name = "vreg_l6e"; + regulator-min-microvolt = <1280000>; + regulator-max-microvolt = <1450000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + + vreg_l8e: ldo8 { + regulator-name = "vreg_l8e"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1950000>; + regulator-initial-mode = ; + regulator-allow-set-load; + regulator-allowed-modes = ; + }; + }; +}; + +ðernet0 { + phy-handle = <&sgmii_phy0>; + phy-mode = "2500base-x"; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,ps-speed = <2500>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy0: ethernet-phy@1c { + compatible = "ethernet-phy-id004d.d101"; + reg = <0x1c>; + reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + active-low; + color = ; + }; + + led@1 { + reg = <1>; + active-low; + color = ; + }; + }; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + phy-handle = <&sgmii_phy1>; + phy-mode = "2500base-x"; + + pinctrl-0 = <ðernet1_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,ps-speed = <2500>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + sgmii_phy1: ethernet-phy@1c { + compatible = "ethernet-phy-id004d.d101"; + reg = <0x1c>; + reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + + leds { + #address-cells = <1>; + #size-cells = <0>; + + led@0 { + reg = <0>; + active-low; + color = ; + }; + + led@1 { + reg = <1>; + active-low; + color = ; + }; + }; + }; + }; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +&i2c15 { + clock-frequency = <400000>; + status = "okay"; + + eeprom: eeprom@50 { + compatible = "atmel,24c16"; + reg = <0x50>; + pagesize = <16>; + }; +}; + +&i2c18 { + clock-frequency = <400000>; + pinctrl-0 = <&qup_i2c18_default>; + pinctrl-names = "default"; + status = "okay"; + + /* RTC RS4C411ZAE */ + rtc_m41t11: rtc@68 { + compatible = "st,m41t11"; + reg = <0x68>; + }; +}; + +&gpu { + status = "okay"; +}; + +&gpu_zap_shader { + firmware-name = "qcom/sa8775p/a663_zap.mbn"; +}; + +&iris { + firmware-name = "qcom/vpu/vpu30_p4_s6.mbn"; + status = "okay"; +}; + +&mdss0 { + status = "okay"; +}; + +&mdss0_dp0 { + pinctrl-0 = <&dp_hot_plug_det>; + pinctrl-names = "default"; + + status = "okay"; +}; + +&mdss0_dp0_out { + data-lanes = <0 1 2 3>; + link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>; + remote-endpoint = <&dp0_connector_in>; +}; + +&mdss0_dp0_phy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&pcie0 { + perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie0_default_state>; + + status = "okay"; +}; + +&pcie1 { + perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>; + wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>; + + pinctrl-names = "default"; + pinctrl-0 = <&pcie1_default_state>; + + status = "okay"; +}; + +&pcie0_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&pcie1_phy { + vdda-phy-supply = <&vreg_l5a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&pmm8654au_0_pon_resin { + linux,code = ; + status = "okay"; +}; + +&qupv3_id_0 { + status = "okay"; +}; + +&qupv3_id_1 { + status = "okay"; +}; + +&qupv3_id_2 { + status = "okay"; +}; + +&remoteproc_adsp { + firmware-name = "qcom/sa8775p/adsp.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp0 { + firmware-name = "qcom/sa8775p/cdsp0.mbn"; + status = "okay"; +}; + +&remoteproc_cdsp1 { + firmware-name = "qcom/sa8775p/cdsp1.mbn"; + status = "okay"; +}; + +&remoteproc_gpdsp0 { + firmware-name = "qcom/sa8775p/gpdsp0.mbn"; + status = "okay"; +}; + +&remoteproc_gpdsp1 { + firmware-name = "qcom/sa8775p/gpdsp1.mbn"; + status = "okay"; +}; + +&serdes0 { + phy-supply = <&vreg_l5a>; + vdda-0p9-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&serdes1 { + phy-supply = <&vreg_l5a>; + vdda-0p9-supply = <&vreg_l4a>; + + status = "okay"; +}; + +&sleep_clk { + clock-frequency = <32768>; +}; + +&uart10 { + compatible = "qcom,geni-debug-uart"; + status = "okay"; +}; + +&ufs_mem_hc { + reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>; + vcc-supply = <&vreg_l8a>; + vcc-max-microamp = <1100000>; + vccq-supply = <&vreg_l4c>; + vccq-max-microamp = <1200000>; + + status = "okay"; +}; + +&ufs_mem_phy { + vdda-phy-supply = <&vreg_l4a>; + vdda-pll-supply = <&vreg_l1c>; + + status = "okay"; +}; + +&usb_0 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_0_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_0_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_1 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_1_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&usb_1_qmpphy { + vdda-phy-supply = <&vreg_l1c>; + vdda-pll-supply = <&vreg_l7a>; + + status = "okay"; +}; + +&usb_2 { + dr_mode = "host"; + + status = "okay"; +}; + +&usb_2_hsphy { + vdda-pll-supply = <&vreg_l7a>; + vdda18-supply = <&vreg_l6c>; + vdda33-supply = <&vreg_l9a>; + + status = "okay"; +}; + +&xo_board_clk { + clock-frequency = <38400000>; +}; + +&pmm8654au_1_gpios { + vcc_3v3_ssd_en_state: vcc-3v3-ssd-en-state { + pins = "gpio9"; + function = "normal"; + output-high; + bias-pull-up; + }; + + status_led_state: status-led-state { + pins = "gpio11"; + function = "normal"; + output-high; + bias-pull-up; + }; + + fan_en_state: fan-en-state { + pins = "gpio12"; + function = "normal"; + output-low; + bias-pull-down; + }; +}; + +&pmm8654au_2_gpios { + vcc3v3_usb30_otg_en_state: vcc3v3-usb30-otg-en-state { + pins = "gpio3"; + function = "normal"; + output-high; + bias-pull-up; + }; + + vcc3v3_usb30_en_state: vcc3v3-usb30-en-state { + pins = "gpio4"; + function = "normal"; + output-high; + bias-pull-up; + }; + + vcc3v3_minipcie_en_state: vcc3v3-minipcie-en-state { + pins = "gpio10"; + function = "normal"; + output-high; + bias-pull-up; + }; +}; + +&pmm8654au_3_gpios { + vcc_5v0_en_state: vcc-5v0-en-state { + pins = "gpio6"; + function = "normal"; + output-high; + bias-pull-up; + }; +}; + +&tlmm { + dp_hot_plug_det: dp-hot-plug-det-state { + pins = "gpio101"; + function = "edp0_hot"; + bias-disable; + }; + + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio8"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio9"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + ethernet1_default: ethernet1-default-state { + ethernet1_mdc: ethernet1-mdc-pins { + pins = "gpio20"; + function = "emac1_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet1_mdio: ethernet1-mdio-pins { + pins = "gpio21"; + function = "emac1_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + + pcie0_default_state: pcie0-default-state { + perst-pins { + pins = "gpio2"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio1"; + function = "pcie0_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio0"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + pcie1_default_state: pcie1-default-state { + perst-pins { + pins = "gpio4"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + clkreq-pins { + pins = "gpio3"; + function = "pcie1_clkreq"; + drive-strength = <2>; + bias-pull-up; + }; + + wake-pins { + pins = "gpio5"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + }; + + qup_i2c18_default: qup-i2c18-state { + pins = "gpio95", "gpio96"; + function = "qup2_se4"; + drive-strength = <2>; + bias-pull-up; + }; + + gpio_keys_default: gpio-keys-default-state { + pins = "gpio97"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + power_led_state: power-led-state { + pins = "gpio98"; + function = "gpio"; + output-high; + bias-pull-up; + }; +}; + +/ { + thermal-zones { + cpu-0-0-0-thermal { + polling-delay-passive = <1000>; + polling-delay = <5000>; + + trips { + fan_on: fan-on { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + }; + + cooling-maps { + map-fan { + trip = <&fan_on>; + cooling-device = <&fan0 1 1>; + }; + }; + }; + }; +}; -- 2.47.3