When accessing an MDIO register using single-byte smbus accesses, we have to perform 2 consecutive operations targeting the same address, first accessing the MSB then the LSB of the 16 bit register: read_1_byte(addr); <- returns MSB of register at address 'addr' read_1_byte(addr); <- returns LSB Some PHY devices present in SFP such as the Broadcom 5461 don't like seeing foreign i2c transactions in-between these 2 smbus accesses, and will return the MSB a second time when trying to read the LSB : read_1_byte(addr); <- returns MSB i2c_transaction_for_other_device_on_the_bus(); read_1_byte(addr); <- returns MSB again Given the already fragile nature of accessing PHYs/SFPs with single-byte smbus accesses, it's safe to say that this Broadcom PHY may not be the only one acting like this. Let's therefore hold the i2c bus lock while performing our smbus transactions to avoid interleaved accesses. Fixes: d4bd3aca33c2 ("net: mdio: mdio-i2c: Add support for single-byte SMBus operations") Signed-off-by: Maxime Chevallier --- drivers/net/mdio/mdio-i2c.c | 39 ++++++++++++++++++++++++------------- 1 file changed, 25 insertions(+), 14 deletions(-) diff --git a/drivers/net/mdio/mdio-i2c.c b/drivers/net/mdio/mdio-i2c.c index 53e96bfab542..ed20352a589a 100644 --- a/drivers/net/mdio/mdio-i2c.c +++ b/drivers/net/mdio/mdio-i2c.c @@ -116,17 +116,23 @@ static int smbus_byte_mii_read_default_c22(struct mii_bus *bus, int phy_id, if (!i2c_mii_valid_phy_id(phy_id)) return 0; - ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, - I2C_SMBUS_READ, reg, - I2C_SMBUS_BYTE_DATA, &smbus_data); + i2c_lock_bus(i2c, I2C_LOCK_SEGMENT); + + ret = __i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, + I2C_SMBUS_READ, reg, + I2C_SMBUS_BYTE_DATA, &smbus_data); if (ret < 0) - return ret; + goto unlock; val = (smbus_data.byte & 0xff) << 8; - ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, - I2C_SMBUS_READ, reg, - I2C_SMBUS_BYTE_DATA, &smbus_data); + ret = __i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, + I2C_SMBUS_READ, reg, + I2C_SMBUS_BYTE_DATA, &smbus_data); + +unlock: + i2c_unlock_bus(i2c, I2C_LOCK_SEGMENT); + if (ret < 0) return ret; @@ -147,17 +153,22 @@ static int smbus_byte_mii_write_default_c22(struct mii_bus *bus, int phy_id, smbus_data.byte = (val & 0xff00) >> 8; - ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, - I2C_SMBUS_WRITE, reg, - I2C_SMBUS_BYTE_DATA, &smbus_data); + i2c_lock_bus(i2c, I2C_LOCK_SEGMENT); + + ret = __i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, + I2C_SMBUS_WRITE, reg, + I2C_SMBUS_BYTE_DATA, &smbus_data); if (ret < 0) - return ret; + goto unlock; smbus_data.byte = val & 0xff; - ret = i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, - I2C_SMBUS_WRITE, reg, - I2C_SMBUS_BYTE_DATA, &smbus_data); + ret = __i2c_smbus_xfer(i2c, i2c_mii_phy_addr(phy_id), 0, + I2C_SMBUS_WRITE, reg, + I2C_SMBUS_BYTE_DATA, &smbus_data); + +unlock: + i2c_unlock_bus(i2c, I2C_LOCK_SEGMENT); return ret < 0 ? ret : 0; } -- 2.49.0