When initializing the default cma region, the "cma=" kernel parameter
takes priority over a DT defined linux,cma-default region. Hence, give
the reserved_mem framework the ability to detect this so that the DT
defined cma region can skip initialization accordingly.

Signed-off-by: Oreoluwa Babatunde <oreoluwa.babatunde@oss.qualcomm.com>
---
 drivers/of/of_reserved_mem.c | 19 +++++++++++++++++--
 include/linux/cma.h          |  1 +
 kernel/dma/contiguous.c      | 16 ++++++++++------
 3 files changed, 28 insertions(+), 8 deletions(-)

diff --git a/drivers/of/of_reserved_mem.c b/drivers/of/of_reserved_mem.c
index 2e9ea751ed2d..bef68a4916b5 100644
--- a/drivers/of/of_reserved_mem.c
+++ b/drivers/of/of_reserved_mem.c
@@ -158,7 +158,7 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
 	phys_addr_t base, size;
 	int len;
 	const __be32 *prop;
-	bool nomap;
+	bool nomap, default_cma;
 
 	prop = of_get_flat_dt_prop(node, "reg", &len);
 	if (!prop)
@@ -171,6 +171,12 @@ static int __init __reserved_mem_reserve_reg(unsigned long node,
 	}
 
 	nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
+	default_cma = of_get_flat_dt_prop(node, "linux,cma-default", NULL);
+
+	if (default_cma && cma_skip_dt_default_reserved_mem()) {
+		pr_err("Skipping dt linux,cma-default for \"cma=\" kernel param.\n");
+		return -EINVAL;
+	}
 
 	while (len >= t_len) {
 		base = dt_mem_next_cell(dt_root_addr_cells, &prop);
@@ -256,12 +262,15 @@ void __init fdt_scan_reserved_mem_reg_nodes(void)
 
 	fdt_for_each_subnode(child, fdt, node) {
 		const char *uname;
+		bool default_cma = of_get_flat_dt_prop(child, "linux,cma-default", NULL);
 
 		prop = of_get_flat_dt_prop(child, "reg", &len);
 		if (!prop)
 			continue;
 		if (!of_fdt_device_is_available(fdt, child))
 			continue;
+		if (default_cma && cma_skip_dt_default_reserved_mem())
+			continue;
 
 		uname = fdt_get_name(fdt, child, NULL);
 		if (len && len % t_len != 0) {
@@ -406,7 +415,7 @@ static int __init __reserved_mem_alloc_size(unsigned long node, const char *unam
 	phys_addr_t base = 0, align = 0, size;
 	int len;
 	const __be32 *prop;
-	bool nomap;
+	bool nomap, default_cma;
 	int ret;
 
 	prop = of_get_flat_dt_prop(node, "size", &len);
@@ -430,6 +439,12 @@ static int __init __reserved_mem_alloc_size(unsigned long node, const char *unam
 	}
 
 	nomap = of_get_flat_dt_prop(node, "no-map", NULL) != NULL;
+	default_cma = of_get_flat_dt_prop(node, "linux,cma-default", NULL);
+
+	if (default_cma && cma_skip_dt_default_reserved_mem()) {
+		pr_err("Skipping dt linux,cma-default for \"cma=\" kernel param.\n");
+		return -EINVAL;
+	}
 
 	/* Need adjust the alignment to satisfy the CMA requirement */
 	if (IS_ENABLED(CONFIG_CMA)
diff --git a/include/linux/cma.h b/include/linux/cma.h
index 62d9c1cf6326..3d3047029950 100644
--- a/include/linux/cma.h
+++ b/include/linux/cma.h
@@ -47,6 +47,7 @@ extern int cma_init_reserved_mem(phys_addr_t base, phys_addr_t size,
 					unsigned int order_per_bit,
 					const char *name,
 					struct cma **res_cma);
+extern bool cma_skip_dt_default_reserved_mem(void);
 extern struct page *cma_alloc(struct cma *cma, unsigned long count, unsigned int align,
 			      bool no_warn);
 extern bool cma_pages_valid(struct cma *cma, const struct page *pages, unsigned long count);
diff --git a/kernel/dma/contiguous.c b/kernel/dma/contiguous.c
index d9b9dcba6ff7..9071c08650e3 100644
--- a/kernel/dma/contiguous.c
+++ b/kernel/dma/contiguous.c
@@ -90,6 +90,16 @@ static int __init early_cma(char *p)
 }
 early_param("cma", early_cma);
 
+/*
+ * cma_skip_dt_default_reserved_mem - This is called from the
+ * reserved_mem framework to detect if the default cma region is being
+ * set by the "cma=" kernel parameter.
+ */
+bool __init cma_skip_dt_default_reserved_mem(void)
+{
+	return size_cmdline != -1;
+}
+
 #ifdef CONFIG_DMA_NUMA_CMA
 
 static struct cma *dma_contiguous_numa_area[MAX_NUMNODES];
@@ -463,12 +473,6 @@ static int __init rmem_cma_setup(struct reserved_mem *rmem)
 	struct cma *cma;
 	int err;
 
-	if (size_cmdline != -1 && default_cma) {
-		pr_info("Reserved memory: bypass %s node, using cmdline CMA params instead\n",
-			rmem->name);
-		return -EBUSY;
-	}
-
 	if (!of_get_flat_dt_prop(node, "reusable", NULL) ||
 	    of_get_flat_dt_prop(node, "no-map", NULL))
 		return -EINVAL;
-- 
2.34.1