From: Carolina Jubran Assign the return value of mlx5_eswitch_block_mode() to 'err' before checking it to avoid returning an uninitialized error code. Fixes: 22239eb258bc ("net/mlx5e: Prevent tunnel reformat when tunnel mode not allowed") Reported-by: kernel test robot Reported-by: Dan Carpenter Closes: https://lore.kernel.org/r/202510271649.uwsIxD6O-lkp@intel.com/ Closes: http://lore.kernel.org/linux-rdma/aPIEK4rLB586FdDt@stanley.mountain/ Signed-off-by: Carolina Jubran Reviewed-by: Jianbo Liu Signed-off-by: Tariq Toukan --- drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c index 0a4fb8c92268..35d9530037a6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_accel/ipsec.c @@ -804,7 +804,8 @@ static int mlx5e_xfrm_add_state(struct net_device *dev, goto err_xfrm; } - if (mlx5_eswitch_block_mode(priv->mdev)) + err = mlx5_eswitch_block_mode(priv->mdev); + if (err) goto unblock_ipsec; if (x->props.mode == XFRM_MODE_TUNNEL && -- 2.31.1 From: Cosmin Ratiu When trying to set num_doorbells to a value greater than the max number of channels, the error message was going over the netlink limit of 80 chars, truncating the most important part of the message, the number of channels. Fix that by trimming the length a bit. Fixes: 11bbcfb7668c ("net/mlx5e: Use the 'num_doorbells' devlink param") Signed-off-by: Cosmin Ratiu Reviewed-by: Dragos Tatulea Signed-off-by: Tariq Toukan --- drivers/net/ethernet/mellanox/mlx5/core/devlink.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c index fceea83abbd7..887adf4807d1 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c @@ -541,7 +541,7 @@ static int mlx5_devlink_num_doorbells_validate(struct devlink *devlink, u32 id, max_num_channels = mlx5e_get_max_num_channels(mdev); if (val32 > max_num_channels) { NL_SET_ERR_MSG_FMT_MOD(extack, - "Requested num_doorbells (%u) exceeds maximum number of channels (%u)", + "Requested num_doorbells (%u) exceeds max number of channels (%u)", val32, max_num_channels); return -EINVAL; } -- 2.31.1 From: Gal Pressman The previous calculation used roundup() which caused an overflow for rates between 25.5Gbps and 26Gbps. For example, a rate of 25.6Gbps would result in using 100Mbps units with value of 256, which would overflow the 8 bits field. Simplify the upper_limit_mbps calculation by removing the unnecessary roundup, and adjust the comparison to use <= to correctly handle the boundary condition. Fixes: d8880795dabf ("net/mlx5e: Implement DCBNL IEEE max rate") Signed-off-by: Gal Pressman Reviewed-by: Nimrod Oren Signed-off-by: Tariq Toukan --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index d166c0d5189e..345614471052 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -595,18 +595,19 @@ static int mlx5e_dcbnl_ieee_setmaxrate(struct net_device *netdev, struct mlx5_core_dev *mdev = priv->mdev; u8 max_bw_value[IEEE_8021QAZ_MAX_TCS]; u8 max_bw_unit[IEEE_8021QAZ_MAX_TCS]; - __u64 upper_limit_mbps = roundup(255 * MLX5E_100MB, MLX5E_1GB); + __u64 upper_limit_mbps; int i; memset(max_bw_value, 0, sizeof(max_bw_value)); memset(max_bw_unit, 0, sizeof(max_bw_unit)); + upper_limit_mbps = 255 * MLX5E_100MB; for (i = 0; i <= mlx5_max_tc(mdev); i++) { if (!maxrate->tc_maxrate[i]) { max_bw_unit[i] = MLX5_BW_NO_LIMIT; continue; } - if (maxrate->tc_maxrate[i] < upper_limit_mbps) { + if (maxrate->tc_maxrate[i] <= upper_limit_mbps) { max_bw_value[i] = div_u64(maxrate->tc_maxrate[i], MLX5E_100MB); max_bw_value[i] = max_bw_value[i] ? max_bw_value[i] : 1; -- 2.31.1 From: Gal Pressman Add validation to reject rates exceeding 255 Gbps that would overflow the 8 bits max bandwidth field. Fixes: d8880795dabf ("net/mlx5e: Implement DCBNL IEEE max rate") Signed-off-by: Gal Pressman Reviewed-by: Nimrod Oren Signed-off-by: Tariq Toukan --- drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index 345614471052..d88a48210fdc 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -596,11 +596,13 @@ static int mlx5e_dcbnl_ieee_setmaxrate(struct net_device *netdev, u8 max_bw_value[IEEE_8021QAZ_MAX_TCS]; u8 max_bw_unit[IEEE_8021QAZ_MAX_TCS]; __u64 upper_limit_mbps; + __u64 upper_limit_gbps; int i; memset(max_bw_value, 0, sizeof(max_bw_value)); memset(max_bw_unit, 0, sizeof(max_bw_unit)); upper_limit_mbps = 255 * MLX5E_100MB; + upper_limit_gbps = 255 * MLX5E_1GB; for (i = 0; i <= mlx5_max_tc(mdev); i++) { if (!maxrate->tc_maxrate[i]) { @@ -612,10 +614,16 @@ static int mlx5e_dcbnl_ieee_setmaxrate(struct net_device *netdev, MLX5E_100MB); max_bw_value[i] = max_bw_value[i] ? max_bw_value[i] : 1; max_bw_unit[i] = MLX5_100_MBPS_UNIT; - } else { + } else if (max_bw_value[i] <= upper_limit_gbps) { max_bw_value[i] = div_u64(maxrate->tc_maxrate[i], MLX5E_1GB); max_bw_unit[i] = MLX5_GBPS_UNIT; + } else { + netdev_err(netdev, + "tc_%d maxrate %llu Kbps exceeds limit %llu\n", + i, maxrate->tc_maxrate[i], + upper_limit_gbps); + return -EINVAL; } } -- 2.31.1 From: Gal Pressman Change the debug message to print the correct units instead of always assuming Gbps, as the value can be in either 100 Mbps or 1 Gbps units. Fixes: 5da8bc3effb6 ("net/mlx5e: DCBNL, Add debug messages log") Signed-off-by: Gal Pressman Reviewed-by: Nimrod Oren Signed-off-by: Tariq Toukan --- .../net/ethernet/mellanox/mlx5/core/en_dcbnl.c | 18 ++++++++++++++++-- 1 file changed, 16 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c index d88a48210fdc..9b93da4d52f6 100644 --- a/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c +++ b/drivers/net/ethernet/mellanox/mlx5/core/en_dcbnl.c @@ -598,6 +598,19 @@ static int mlx5e_dcbnl_ieee_setmaxrate(struct net_device *netdev, __u64 upper_limit_mbps; __u64 upper_limit_gbps; int i; + struct { + int scale; + const char *units_str; + } units[] = { + [MLX5_100_MBPS_UNIT] = { + .scale = 100, + .units_str = "Mbps", + }, + [MLX5_GBPS_UNIT] = { + .scale = 1, + .units_str = "Gbps", + }, + }; memset(max_bw_value, 0, sizeof(max_bw_value)); memset(max_bw_unit, 0, sizeof(max_bw_unit)); @@ -628,8 +641,9 @@ static int mlx5e_dcbnl_ieee_setmaxrate(struct net_device *netdev, } for (i = 0; i < IEEE_8021QAZ_MAX_TCS; i++) { - netdev_dbg(netdev, "%s: tc_%d <=> max_bw %d Gbps\n", - __func__, i, max_bw_value[i]); + netdev_dbg(netdev, "%s: tc_%d <=> max_bw %u %s\n", __func__, i, + max_bw_value[i] * units[max_bw_unit[i]].scale, + units[max_bw_unit[i]].units_str); } return mlx5_modify_port_ets_rate_limit(mdev, max_bw_value, max_bw_unit); -- 2.31.1