In the current implementation, the enetc_xdp_xmit() always transmits redirected XDP frames even if the link is down, but the frames cannot be transmitted from TX BD rings when the link is down, so the frames are still kept in the TX BD rings. If the XDP program is uninstalled, users will see the following warning logs. fsl_enetc 0000:00:00.0 eno0: timeout for tx ring #6 clear More worse, the TX BD ring cannot work properly anymore, because the HW PIR and CIR are not equal after the re-initialization of the TX BD ring. At this point, the BDs between CIR and PIR are invalid, which will cause a hardware malfunction. Another reason is that there is internal context in the ring prefetch logic that will retain the state from the first incarnation of the ring and continue prefetching from the stale location when we re-initialize the ring. The internal context is only reset by an FLR. That is to say, for LS1028A ENETC, software cannot set the HW CIR and PIR when initializing the TX BD ring. I see no reasons to transmit the redirected XDP frames when the link is down, so add a link status check to quickly fix this issue. However, this solution does not completely solve the problem, for example, if the link is broken during transmission and the TX BD ring still has unsent frames. I think this requires another patch to address this situation, but it will not conflict with the current solution and can coexist. Fixes: 9d2b68cc108d ("net: enetc: add support for XDP_REDIRECT") Signed-off-by: Wei Fang --- v2 chages: Improve the commit message v1: https://lore.kernel.org/imx/20251205105307.2756994-1-wei.fang@nxp.com/ --- drivers/net/ethernet/freescale/enetc/enetc.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc.c b/drivers/net/ethernet/freescale/enetc/enetc.c index 0535e92404e3..f410c245ea91 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc.c +++ b/drivers/net/ethernet/freescale/enetc/enetc.c @@ -1778,7 +1778,8 @@ int enetc_xdp_xmit(struct net_device *ndev, int num_frames, int xdp_tx_bd_cnt, i, k; int xdp_tx_frm_cnt = 0; - if (unlikely(test_bit(ENETC_TX_DOWN, &priv->flags))) + if (unlikely(test_bit(ENETC_TX_DOWN, &priv->flags) || + !netif_carrier_ok(ndev))) return -ENETDOWN; enetc_lock_mdio(); -- 2.34.1