Some boards feed the YT8531 PHY from an SoC-provided external reference clock described by the common ethernet-phy "clocks" property. Enable the optional PHY clock during probe so boards can model this clock as a PHY input instead of keeping the clock alive from the MAC driver. This is needed on the Alientek DLRV1126, where the PHY reference clock is provided by CLK_GMAC_ETHERNET_OUT. Signed-off-by: Yanan He --- drivers/net/phy/motorcomm.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/phy/motorcomm.c b/drivers/net/phy/motorcomm.c index 5071605a1a11..3396a38cfc0f 100644 --- a/drivers/net/phy/motorcomm.c +++ b/drivers/net/phy/motorcomm.c @@ -6,6 +6,7 @@ * Author: Frank */ +#include #include #include #include @@ -1180,9 +1181,15 @@ static int yt8521_probe(struct phy_device *phydev) static int yt8531_probe(struct phy_device *phydev) { struct device *dev = &phydev->mdio.dev; + struct clk *clk; u16 mask, val; u32 freq; + clk = devm_clk_get_optional_enabled(dev, NULL); + if (IS_ERR(clk)) + return dev_err_probe(dev, PTR_ERR(clk), + "failed to get and enable PHY clock\n"); + if (device_property_read_u32(dev, "motorcomm,clk-out-frequency-hz", &freq)) freq = YTPHY_DTS_OUTPUT_CLK_DIS; -- 2.54.0