Extend the driver to support a new model - sa8255p. Unlike the previously supported variants, this one's power management is done in the firmware using SCMI. This is modeled in linux using power domains so add support for them. Signed-off-by: Bartosz Golaszewski Signed-off-by: Bartosz Golaszewski --- .../ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c | 301 ++++++++++++++++++--- 1 file changed, 262 insertions(+), 39 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c index f32ff0d9ce513d8270c8db9c549a79778549df59..09ce80b446cbac8bf85d974a3d6517e037b049c1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-qcom-ethqos.c @@ -7,6 +7,8 @@ #include #include #include +#include +#include #include "stmmac.h" #include "stmmac_platform.h" @@ -81,6 +83,13 @@ #define SGMII_10M_RX_CLK_DVDR 0x31 +enum ethqos_pd_selector { + ETHQOS_PD_CORE = 0, + ETHQOS_PD_MDIO, + ETHQOS_PD_SERDES, + ETHQOS_NUM_PDS, +}; + struct ethqos_emac_por { unsigned int offset; unsigned int value; @@ -98,6 +107,9 @@ struct ethqos_emac_driver_data { struct ethqos_emac_pm_data { const char *link_clk_name; + bool use_domains; + struct dev_pm_domain_attach_data pd; + unsigned int clk_ptp_rate; }; struct ethqos_emac_match_data { @@ -110,13 +122,21 @@ struct ethqos_emac_pm_ctx { struct phy *serdes_phy; }; +struct ethqos_emac_pd_ctx { + struct dev_pm_domain_list *pd_list; + int serdes_level; +}; + struct qcom_ethqos { struct platform_device *pdev; void __iomem *rgmii_base; void (*configure_func)(struct qcom_ethqos *ethqos, phy_interface_t interface, int speed); - struct ethqos_emac_pm_ctx pm; + union { + struct ethqos_emac_pm_ctx pm; + struct ethqos_emac_pd_ctx pd; + }; phy_interface_t phy_mode; const struct ethqos_emac_por *rgmii_por; @@ -338,6 +358,25 @@ static const struct ethqos_emac_match_data emac_sa8775p_data = { .pm_data = &emac_sa8775p_pm_data, }; +static const char * const emac_sa8255p_pd_names[] = { + "core", "mdio", "serdes" +}; + +static const struct ethqos_emac_pm_data emac_sa8255p_pm_data = { + .pd = { + .pd_flags = PD_FLAG_NO_DEV_LINK, + .pd_names = emac_sa8255p_pd_names, + .num_pd_names = ETHQOS_NUM_PDS, + }, + .use_domains = true, + .clk_ptp_rate = 230400000, +}; + +static const struct ethqos_emac_match_data emac_sa8255p_data = { + .drv_data = &emac_v4_0_0_data, + .pm_data = &emac_sa8255p_pm_data, +}; + static int ethqos_dll_configure(struct qcom_ethqos *ethqos) { struct device *dev = ðqos->pdev->dev; @@ -406,6 +445,28 @@ static int ethqos_dll_configure(struct qcom_ethqos *ethqos) return 0; } +static int qcom_ethqos_domain_on(struct qcom_ethqos *ethqos, + enum ethqos_pd_selector sel) +{ + struct device *dev = ethqos->pd.pd_list->pd_devs[sel]; + int ret; + + ret = pm_runtime_resume_and_get(dev); + if (ret < 0) + dev_err(ðqos->pdev->dev, + "Failed to enable the power domain for %s\n", + dev_name(dev)); + return ret; +} + +static void qcom_ethqos_domain_off(struct qcom_ethqos *ethqos, + enum ethqos_pd_selector sel) +{ + struct device *dev = ethqos->pd.pd_list->pd_devs[sel]; + + pm_runtime_put_sync(dev); +} + static int ethqos_rgmii_macro_init(struct qcom_ethqos *ethqos, int speed) { struct device *dev = ðqos->pdev->dev; @@ -655,6 +716,20 @@ static void ethqos_configure_sgmii(struct qcom_ethqos *ethqos, ethqos_pcs_set_inband(priv, interface == PHY_INTERFACE_MODE_SGMII); } +static void ethqos_configure_sgmii_pd(struct qcom_ethqos *ethqos, + phy_interface_t interface, int speed) +{ + switch (speed) { + case SPEED_2500: + case SPEED_1000: + case SPEED_100: + case SPEED_10: + ethqos->pd.serdes_level = speed; + } + + ethqos_configure_sgmii(ethqos, interface, speed); +} + static void ethqos_configure(struct qcom_ethqos *ethqos, phy_interface_t interface, int speed) { @@ -710,6 +785,45 @@ static int ethqos_mac_finish_serdes(struct net_device *ndev, void *priv, return ret; } +static int ethqos_mac_finish_serdes_pd(struct net_device *ndev, void *priv, + unsigned int mode, + phy_interface_t interface) +{ + struct qcom_ethqos *ethqos = priv; + struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES]; + int ret = 0; + + qcom_ethqos_set_sgmii_loopback(ethqos, false); + + if (interface == PHY_INTERFACE_MODE_SGMII || + interface == PHY_INTERFACE_MODE_2500BASEX) + ret = dev_pm_opp_set_level(dev, ethqos->pd.serdes_level); + + return ret; +} + +static int qcom_ethqos_pd_serdes_powerup(struct net_device *ndev, void *priv) +{ + struct qcom_ethqos *ethqos = priv; + struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES]; + int ret; + + ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_SERDES); + if (ret < 0) + return ret; + + return dev_pm_opp_set_level(dev, ethqos->pd.serdes_level); +} + +static void qcom_ethqos_pd_serdes_powerdown(struct net_device *ndev, void *priv) +{ + struct qcom_ethqos *ethqos = priv; + struct device *dev = ethqos->pd.pd_list->pd_devs[ETHQOS_PD_SERDES]; + + dev_pm_opp_set_level(dev, 0); + qcom_ethqos_domain_off(ethqos, ETHQOS_PD_SERDES); +} + static int ethqos_clks_config(void *priv, bool enabled) { struct qcom_ethqos *ethqos = priv; @@ -741,6 +855,68 @@ static void ethqos_clks_disable(void *data) ethqos_clks_config(data, false); } +static void ethqos_disable_serdes(void *data) +{ + struct qcom_ethqos *ethqos = data; + + qcom_ethqos_domain_off(ethqos, ETHQOS_PD_SERDES); +} + +static int ethqos_pd_clks_config(void *priv, bool enabled) +{ + struct qcom_ethqos *ethqos = priv; + int ret = 0; + + if (enabled) { + ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_MDIO); + if (ret < 0) { + dev_err(ðqos->pdev->dev, + "Failed to enable the MDIO power domain\n"); + return ret; + } + + ethqos_set_func_clk_en(ethqos); + } else { + qcom_ethqos_domain_off(ethqos, ETHQOS_PD_MDIO); + } + + return ret; +} + +static int qcom_ethqos_pd_init(struct device *dev, void *priv) +{ + struct qcom_ethqos *ethqos = priv; + int ret; + + /* + * Enable functional clock to prevent DMA reset after timeout due + * to no PHY clock being enabled after the hardware block has been + * power cycled. The actual configuration will be adjusted once + * ethqos_fix_mac_speed() is called. + */ + ethqos_set_func_clk_en(ethqos); + + ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_CORE); + if (ret) + return ret; + + ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_MDIO); + if (ret) { + qcom_ethqos_domain_off(ethqos, ETHQOS_PD_CORE); + return ret; + } + + return 0; +} + +static void qcom_ethqos_pd_exit(struct device *dev, void *data) +{ + struct qcom_ethqos *ethqos = data; + + qcom_ethqos_domain_off(ethqos, ETHQOS_PD_MDIO); + qcom_ethqos_domain_off(ethqos, ETHQOS_PD_CORE); +} + static void ethqos_ptp_clk_freq_config(struct stmmac_priv *priv) { struct plat_stmmacenet_data *plat_dat = priv->plat; @@ -781,31 +957,11 @@ static int qcom_ethqos_probe(struct platform_device *pdev) "dt configuration failed\n"); } - plat_dat->clks_config = ethqos_clks_config; - ethqos = devm_kzalloc(dev, sizeof(*ethqos), GFP_KERNEL); if (!ethqos) return -ENOMEM; ethqos->phy_mode = plat_dat->phy_interface; - switch (ethqos->phy_mode) { - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - ethqos->configure_func = ethqos_configure_rgmii; - break; - case PHY_INTERFACE_MODE_2500BASEX: - case PHY_INTERFACE_MODE_SGMII: - ethqos->configure_func = ethqos_configure_sgmii; - plat_dat->mac_finish = ethqos_mac_finish_serdes; - break; - default: - dev_err(dev, "Unsupported phy mode %s\n", - phy_modes(ethqos->phy_mode)); - return -EINVAL; - } - ethqos->pdev = pdev; ethqos->rgmii_base = devm_platform_ioremap_resource_byname(pdev, "rgmii"); if (IS_ERR(ethqos->rgmii_base)) @@ -823,35 +979,101 @@ static int qcom_ethqos_probe(struct platform_device *pdev) ethqos->has_emac_ge_3 = drv_data->has_emac_ge_3; ethqos->needs_sgmii_loopback = drv_data->needs_sgmii_loopback; - ethqos->pm.link_clk = devm_clk_get(dev, clk_name); - if (IS_ERR(ethqos->pm.link_clk)) - return dev_err_probe(dev, PTR_ERR(ethqos->pm.link_clk), - "Failed to get link_clk\n"); + if (pm_data && pm_data->use_domains) { + switch (ethqos->phy_mode) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + ethqos->configure_func = ethqos_configure_rgmii; + break; + case PHY_INTERFACE_MODE_2500BASEX: + case PHY_INTERFACE_MODE_SGMII: + ethqos->configure_func = ethqos_configure_sgmii_pd; + plat_dat->mac_finish = ethqos_mac_finish_serdes_pd; + break; + default: + dev_err(dev, "Unsupported phy mode %s\n", + phy_modes(ethqos->phy_mode)); + return -EINVAL; + } - ret = ethqos_clks_config(ethqos, true); - if (ret) - return ret; + ret = devm_pm_domain_attach_list(dev, &pm_data->pd, + ðqos->pd.pd_list); + if (ret < 0) + return dev_err_probe(dev, ret, "Failed to attach power domains\n"); + + plat_dat->clks_config = ethqos_pd_clks_config; + plat_dat->serdes_powerup = qcom_ethqos_pd_serdes_powerup; + plat_dat->serdes_powerdown = qcom_ethqos_pd_serdes_powerdown; + plat_dat->exit = qcom_ethqos_pd_exit; + plat_dat->init = qcom_ethqos_pd_init; + plat_dat->clk_ptp_rate = pm_data->clk_ptp_rate; + + ret = qcom_ethqos_domain_on(ethqos, ETHQOS_PD_SERDES); + if (ret) + return dev_err_probe(dev, ret, + "Failed to enable the serdes power domain\n"); + + ret = devm_add_action_or_reset(dev, ethqos_disable_serdes, ethqos); + if (ret) + return ret; + } else { + switch (ethqos->phy_mode) { + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + ethqos->configure_func = ethqos_configure_rgmii; + break; + case PHY_INTERFACE_MODE_2500BASEX: + case PHY_INTERFACE_MODE_SGMII: + ethqos->configure_func = ethqos_configure_sgmii; + plat_dat->mac_finish = ethqos_mac_finish_serdes; + break; + default: + dev_err(dev, "Unsupported phy mode %s\n", + phy_modes(ethqos->phy_mode)); + return -EINVAL; + } - ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos); - if (ret) - return ret; + ethqos->pm.link_clk = devm_clk_get(dev, clk_name); + if (IS_ERR(ethqos->pm.link_clk)) + return dev_err_probe(dev, PTR_ERR(ethqos->pm.link_clk), + "Failed to get link_clk\n"); + + ret = ethqos_clks_config(ethqos, true); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, ethqos_clks_disable, ethqos); + if (ret) + return ret; + + ethqos->pm.serdes_phy = devm_phy_optional_get(dev, "serdes"); + if (IS_ERR(ethqos->pm.serdes_phy)) + return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy), + "Failed to get serdes phy\n"); - ethqos->pm.serdes_phy = devm_phy_optional_get(dev, "serdes"); - if (IS_ERR(ethqos->pm.serdes_phy)) - return dev_err_probe(dev, PTR_ERR(ethqos->pm.serdes_phy), - "Failed to get serdes phy\n"); + ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface, + SPEED_1000); - ethqos_set_clk_tx_rate(ethqos, NULL, plat_dat->phy_interface, - SPEED_1000); + plat_dat->clks_config = ethqos_clks_config; + plat_dat->set_clk_tx_rate = ethqos_set_clk_tx_rate; + plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config; + + if (ethqos->pm.serdes_phy) { + plat_dat->serdes_powerup = qcom_ethqos_serdes_powerup; + plat_dat->serdes_powerdown = qcom_ethqos_serdes_powerdown; + } + } qcom_ethqos_set_sgmii_loopback(ethqos, true); ethqos_set_func_clk_en(ethqos); plat_dat->bsp_priv = ethqos; - plat_dat->set_clk_tx_rate = ethqos_set_clk_tx_rate; plat_dat->fix_mac_speed = ethqos_fix_mac_speed; plat_dat->dump_debug_regs = rgmii_dump; - plat_dat->ptp_clk_freq_config = ethqos_ptp_clk_freq_config; plat_dat->core_type = DWMAC_CORE_GMAC4; if (ethqos->has_emac_ge_3) plat_dat->dwmac4_addrs = &drv_data->dwmac4_addrs; @@ -877,6 +1099,7 @@ static int qcom_ethqos_probe(struct platform_device *pdev) static const struct of_device_id qcom_ethqos_match[] = { { .compatible = "qcom,qcs404-ethqos", .data = &emac_qcs404_data}, + { .compatible = "qcom,sa8255p-ethqos", .data = &emac_sa8255p_data}, { .compatible = "qcom,sa8775p-ethqos", .data = &emac_sa8775p_data}, { .compatible = "qcom,sc8280xp-ethqos", .data = &emac_sc8280xp_data}, { .compatible = "qcom,sm8150-ethqos", .data = &emac_sm8150_data}, -- 2.47.3