catc_probe() fills three URBs with hardcoded endpoint pipes without verifying the endpoint descriptors: - usb_sndbulkpipe(usbdev, 1) and usb_rcvbulkpipe(usbdev, 1) for TX/RX - usb_rcvintpipe(usbdev, 2) for interrupt status A malformed USB device can present these endpoints with transfer types that differ from what the driver assumes. Add a catc_usb_ep enum for endpoint numbers, replacing magic constants throughout. Add usb_check_bulk_endpoints() and usb_check_int_endpoints() calls after usb_set_interface() to verify endpoint types before use, rejecting devices with mismatched descriptors at probe time. Similar to - commit 90b7f2961798 ("net: usb: rtl8150: enable basic endpoint checking") which fixed the issue in rtl8150. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Suggested-by: Simon Horman Signed-off-by: Ziyi Guo --- v2: - Use an enum instead of the magic numbers drivers/net/usb/catc.c | 37 +++++++++++++++++++++++++++++++------ 1 file changed, 31 insertions(+), 6 deletions(-) diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c index 6759388692f8..632e27ee9101 100644 --- a/drivers/net/usb/catc.c +++ b/drivers/net/usb/catc.c @@ -64,6 +64,16 @@ static const char driver_name[] = "catc"; #define CTRL_QUEUE 16 /* Max control requests in flight (power of two) */ #define RX_PKT_SZ 1600 /* Max size of receive packet for F5U011 */ +/* + * USB endpoints. + */ + +enum catc_usb_ep { + CATC_USB_EP_CONTROL = 0, + CATC_USB_EP_BULK = 1, + CATC_USB_EP_INT_IN = 2, +}; + /* * Control requests. */ @@ -772,6 +782,13 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id u8 broadcast[ETH_ALEN]; u8 *macbuf; int pktsz, ret = -ENOMEM; + static const u8 bulk_ep_addr[] = { + CATC_USB_EP_BULK | USB_DIR_OUT, + CATC_USB_EP_BULK | USB_DIR_IN, + 0}; + static const u8 int_ep_addr[] = { + CATC_USB_EP_INT_IN | USB_DIR_IN, + 0}; macbuf = kmalloc(ETH_ALEN, GFP_KERNEL); if (!macbuf) @@ -784,6 +801,14 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id goto fail_mem; } + /* Verify that all required endpoints are present */ + if (!usb_check_bulk_endpoints(intf, bulk_ep_addr) || + !usb_check_int_endpoints(intf, int_ep_addr)) { + dev_err(dev, "Missing or invalid endpoints\n"); + ret = -ENODEV; + goto fail_mem; + } + netdev = alloc_etherdev(sizeof(struct catc)); if (!netdev) goto fail_mem; @@ -828,14 +853,14 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id usb_fill_control_urb(catc->ctrl_urb, usbdev, usb_sndctrlpipe(usbdev, 0), NULL, NULL, 0, catc_ctrl_done, catc); - usb_fill_bulk_urb(catc->tx_urb, usbdev, usb_sndbulkpipe(usbdev, 1), - NULL, 0, catc_tx_done, catc); + usb_fill_bulk_urb(catc->tx_urb, usbdev, usb_sndbulkpipe(usbdev, CATC_USB_EP_BULK), + NULL, 0, catc_tx_done, catc); - usb_fill_bulk_urb(catc->rx_urb, usbdev, usb_rcvbulkpipe(usbdev, 1), - catc->rx_buf, pktsz, catc_rx_done, catc); + usb_fill_bulk_urb(catc->rx_urb, usbdev, usb_rcvbulkpipe(usbdev, CATC_USB_EP_BULK), + catc->rx_buf, pktsz, catc_rx_done, catc); - usb_fill_int_urb(catc->irq_urb, usbdev, usb_rcvintpipe(usbdev, 2), - catc->irq_buf, 2, catc_irq_done, catc, 1); + usb_fill_int_urb(catc->irq_urb, usbdev, usb_rcvintpipe(usbdev, CATC_USB_EP_INT_IN), + catc->irq_buf, 2, catc_irq_done, catc, 1); if (!catc->is_f5u011) { u32 *buf; -- 2.34.1