From: "Markus Schneider-Pargmann (TI.com)" The pins associated with m_can have to have a special configuration to be able to wakeup the SoC from some system states. This configuration is described in the wakeup pinctrl state while the default state describes the default configuration. Also add the sleep state which is already in use by some devicetrees. Also m_can can be a wakeup-source if capable of wakeup. Signed-off-by: Markus Schneider-Pargmann (TI.com) Reviewed-by: Dhruva Gole Reviewed-by: Rob Herring (Arm) Link: https://patch.msgid.link/20251001-topic-mcan-wakeup-source-v6-12-v10-1-4ab508ac5d1e@baylibre.com Signed-off-by: Marc Kleine-Budde --- .../bindings/net/can/bosch,m_can.yaml | 25 +++++++++++++++++++ 1 file changed, 25 insertions(+) diff --git a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml index 61ef60d8f1c7..2c9d37975bed 100644 --- a/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml +++ b/Documentation/devicetree/bindings/net/can/bosch,m_can.yaml @@ -109,6 +109,26 @@ properties: maximum: 32 minItems: 1 + pinctrl-0: + description: Default pinctrl state + + pinctrl-1: + description: Can be "sleep" or "wakeup" pinctrl state + + pinctrl-2: + description: Can be "sleep" or "wakeup" pinctrl state + + pinctrl-names: + description: + When present should contain at least "default" describing the default pin + states. Other states are "sleep" which describes the pinstate when + sleeping and "wakeup" describing the pins if wakeup is enabled. + minItems: 1 + items: + - const: default + - enum: [ sleep, wakeup ] + - const: wakeup + power-domains: description: Power domain provider node and an args specifier containing @@ -125,6 +145,11 @@ properties: minItems: 1 maxItems: 2 + wakeup-source: + $ref: /schemas/types.yaml#/definitions/phandle-array + description: + List of phandles to system idle states in which mcan can wakeup the system. + required: - compatible - reg -- 2.51.0