7.2-stable review patch. If anyone has any objections, please let me know. ------------------ From: Ian Lin commit b51faf3f2e307f114854bbe6d495f03cd5370686 upstream. The Compal EXC-T1 is a Qualcomm MDM9207-based LTE modem which reports "EXC-x1" as its USB product string. It exposes diagnostic, modem, AT, and NMEA ports as vendor-specific interfaces with subclass 0x10 and protocols 0x01 through 0x04. Add exact interface matches for these four ports, leaving the ff/ff/ff interface unbound. Relevant output from usb-devices: T: Bus=03 Lev=02 Prnt=03 Port=03 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=04b7 ProdID=4d22 Rev=03.18 S: Manufacturer=CEI S: Product=EXC-x1 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=10 Prot=01 Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=02 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=03 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=04 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) I: If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=10 Prot=05 Driver=qmi_wwan Tested on a Compal EXC-T1 modem using an Ubuntu kernel build. The four serial interfaces bound to option and exposed ttyUSB3 through ttyUSB6. Assisted-by: Codex:GPT-5 Signed-off-by: Ian Lin Cc: stable@vger.kernel.org Signed-off-by: Johan Hovold Signed-off-by: Greg Kroah-Hartman --- drivers/usb/serial/option.c | 4 ++++ 1 file changed, 4 insertions(+) --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -2436,6 +2436,10 @@ static const struct usb_device_id option .driver_info = RSVD(5) }, { USB_DEVICE_INTERFACE_CLASS(0x0489, 0xe167, 0xff), /* Foxconn T99W640 MBIM */ .driver_info = RSVD(3) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x4d22, 0xff, 0x10, 0x01) }, /* Compal EXC-T1 */ + { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x4d22, 0xff, 0x10, 0x02) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x4d22, 0xff, 0x10, 0x03) }, + { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x4d22, 0xff, 0x10, 0x04) }, { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x8217, 0xff, 0xff, 0x30) }, /* Compal EXM-G1x */ { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x8217, 0xff, 0xff, 0x40) }, { USB_DEVICE_AND_INTERFACE_INFO(0x04b7, 0x8217, 0xff, 0xff, 0x60) },