Add ethernet controller device node for cv18xx SoC. Signed-off-by: Inochi Amaoto --- arch/riscv/boot/dts/sophgo/cv180x.dtsi | 44 ++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi index e91bb512b099..7eecc67f896e 100644 --- a/arch/riscv/boot/dts/sophgo/cv180x.dtsi +++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi @@ -189,6 +189,50 @@ i2c4: i2c@4040000 { status = "disabled"; }; + gmac0: ethernet@4070000 { + compatible = "sophgo,cv1800b-dwmac", "snps,dwmac-3.70a"; + reg = <0x04070000 0x10000>; + clocks = <&clk CLK_AXI4_ETH0>, <&clk CLK_ETH0_500M>; + clock-names = "stmmaceth", "ptp_ref"; + interrupts = ; + interrupt-names = "macirq"; + resets = <&rst RST_ETH0>; + reset-names = "stmmaceth"; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,multicast-filter-bins = <0>; + snps,perfect-filter-entries = <1>; + snps,aal; + snps,txpbl = <8>; + snps,rxpbl = <8>; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + status = "disabled"; + + gmac0_mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <16 8 4 0 0 0 0>; + snps,rd_osr_lmt = <2>; + snps,wr_osr_lmt = <1>; + }; + }; + uart0: serial@4140000 { compatible = "snps,dw-apb-uart"; reg = <0x04140000 0x100>; -- 2.50.0