The NETC IP provides two ways for ENETC to access the external PHY, one is the external MDIO interface is controlled by EMDIO module, and EMDIO provides a way for different ENETCs to share a set of MDIO signals to access their PHYs. And this EMDIO support has been added in the commit a52201fb9caa ("net: enetc: add i.MX95 EMDIO support"). The other way is that each ENETC has its set of MDIO registers to access and control its PHY. In addition, each ENETC has one internal MDIO interface for managing on-die PHY (PCS). So add port internal and external MDIO support for ENETC v4. Signed-off-by: Wei Fang --- drivers/net/ethernet/freescale/enetc/enetc4_hw.h | 6 ++++++ .../net/ethernet/freescale/enetc/enetc_pf_common.c | 14 ++++++++++++-- 2 files changed, 18 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/freescale/enetc/enetc4_hw.h b/drivers/net/ethernet/freescale/enetc/enetc4_hw.h index ebea4298791c..3ed0f7a02767 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc4_hw.h +++ b/drivers/net/ethernet/freescale/enetc/enetc4_hw.h @@ -170,6 +170,9 @@ /* Port MAC 0/1 Maximum Frame Length Register */ #define ENETC4_PM_MAXFRM(mac) (0x5014 + (mac) * 0x400) +/* Port internal MDIO base address, use to access PCS */ +#define ENETC4_PM_IMDIO_BASE 0x5030 + /* Port MAC 0/1 Pause Quanta Register */ #define ENETC4_PM_PAUSE_QUANTA(mac) (0x5054 + (mac) * 0x400) @@ -198,6 +201,9 @@ #define SSP_1G 2 #define PM_IF_MODE_ENA BIT(15) +/* Port external MDIO Base address, use to access off-chip PHY */ +#define ENETC4_EMDIO_BASE 0x5c00 + /**********************ENETC Pseudo MAC port registers************************/ /* Port pseudo MAC receive octets counter (64-bit) */ #define ENETC4_PPMROCR 0x5080 diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c index 9c634205e2a7..76263b8566bb 100644 --- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c +++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c @@ -176,7 +176,12 @@ static int enetc_mdio_probe(struct enetc_pf *pf, struct device_node *np) bus->parent = dev; mdio_priv = bus->priv; mdio_priv->hw = &pf->si->hw; - mdio_priv->mdio_base = ENETC_EMDIO_BASE; + + if (is_enetc_rev1(pf->si)) + mdio_priv->mdio_base = ENETC_EMDIO_BASE; + else + mdio_priv->mdio_base = ENETC4_EMDIO_BASE; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(dev)); err = of_mdiobus_register(bus, np); @@ -221,7 +226,12 @@ static int enetc_imdio_create(struct enetc_pf *pf) bus->phy_mask = ~0; mdio_priv = bus->priv; mdio_priv->hw = &pf->si->hw; - mdio_priv->mdio_base = ENETC_PM_IMDIO_BASE; + + if (is_enetc_rev1(pf->si)) + mdio_priv->mdio_base = ENETC_PM_IMDIO_BASE; + else + mdio_priv->mdio_base = ENETC4_PM_IMDIO_BASE; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-imdio", dev_name(dev)); err = mdiobus_register(bus); -- 2.34.1