7.3-stable review patch. If anyone has any objections, please let me know. ------------------ From: Judith Mendez [ Upstream commit 1e2e5016bda94b2bcd86258b5eb77fe3006639a0 ] MMC clock pins must be configured as OUTPUT-only per TRM [0] with receiver disabled (RXACTIVE bit = 0). Change MMC CLK pins from PIN_INPUT to PIN_OUTPUT to match documentation. [0] https://www.ti.com/lit/pdf/spruiv7 Rev. C: Table 12-246. MMCSDi I/O Signals Fixes: d19a66ae488a ("arm64: dts: ti: k3-am625-sk: Enable on board peripherals") Cc: stable@vger.kernel.org Signed-off-by: Judith Mendez Reviewed-by: Moteen Shah Link: https://patch.msgid.link/20260909214743.899477-10-jm@ti.com Signed-off-by: Nishanth Menon Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi index ab9e58c2d225e..d2f41e2ed6239 100644 --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi @@ -194,7 +194,7 @@ main_mmc1_pins_default: main-mmc1-default-pins { bootph-all; pinctrl-single,pins = < AM62X_IOPAD(0x23c, PIN_INPUT, 0) /* (A21/C18) MMC1_CMD */ - AM62X_IOPAD(0x234, PIN_INPUT, 0) /* (B22/A20) MMC1_CLK */ + AM62X_IOPAD(0x234, PIN_OUTPUT, 0) /* (B22/A20) MMC1_CLK */ AM62X_IOPAD(0x230, PIN_INPUT, 0) /* (A22/A19) MMC1_DAT0 */ AM62X_IOPAD(0x22c, PIN_INPUT, 0) /* (B21/B19) MMC1_DAT1 */ AM62X_IOPAD(0x228, PIN_INPUT, 0) /* (C21/B20) MMC1_DAT2 */ -- 2.53.0