The Ariaboard Photonicat has a Motorcomm YT8521SC Gigabit Ethernet PHY
connected to GMAC0 via XPCS SGMII.  Enable the necessary nodes to make
this port functional.

Enable combphy2 with rockchip,sgmii-mac-sel = <0> to route the SGMII
interface to GMAC0.  Enable the xpcs node and its port 0 sub-node,
referencing combphy2 as the SerDes PHY.

Add the mdio0 node with the YT8521SC PHY at address 3, including its
reset GPIO and LED configuration.  Also add LED configuration for the
existing RGMII PHY on mdio1 for consistency.

Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 .../boot/dts/rockchip/rk3568-photonicat.dts   | 77 ++++++++++++++++++-
 1 file changed, 75 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts b/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts
index 58c1052ba8ef3..91c17b624fd17 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-photonicat.dts
@@ -3,6 +3,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3568.dtsi"
@@ -242,6 +243,7 @@ &combphy1 {
 
 &combphy2 {
 	status = "okay";
+	rockchip,sgmii-mac-sel = <0>;
 };
 
 &cpu0 {
@@ -260,9 +262,18 @@ &cpu3 {
 	cpu-supply = <&vdd_cpu>;
 };
 
-/* Motorcomm YT8521SC LAN port (require SGMII) */
+/* Motorcomm YT8521SC LAN port */
 &gmac0 {
-	status = "disabled";
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>;
+	assigned-clock-parents = <&xpcs_gmac0_clk>;
+	pcs-handle = <&xpcs_mii0>;
+	managed = "in-band-status";
+	phy-handle = <&sgmii_phy>;
+	phy-mode = "sgmii";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim>;
+	status = "okay";
 };
 
 /* Motorcomm YT8521SC WAN port */
@@ -341,6 +352,39 @@ &i2s0_8ch {
 	status = "okay";
 };
 
+&mdio0 {
+	sgmii_phy: ethernet-phy@3 {
+		compatible = "ethernet-phy-id0000.011a";
+		reg = <0x3>;
+		max-speed = <1000>;
+		eee-broken-10gt;
+		eee-broken-10gkx4;
+		eee-broken-10gkr;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PC6 GPIO_ACTIVE_LOW>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				default-state = "keep";
+			};
+		};
+	};
+};
+
 &mdio1 {
 	rgmii_phy: ethernet-phy@3 {
 		compatible = "ethernet-phy-ieee802.3-c22";
@@ -350,6 +394,25 @@ rgmii_phy: ethernet-phy@3 {
 		reset-gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>;
 		rx-internal-delay-ps = <1500>;
 		tx-internal-delay-ps = <1500>;
+
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led@1 {
+				reg = <1>;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+
+			led@2 {
+				reg = <2>;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				default-state = "keep";
+			};
+		};
 	};
 };
 
@@ -586,3 +649,13 @@ &xin32k {
 	pinctrl-names = "default";
 	pinctrl-0 = <&clk32k_out1>;
 };
+
+&xpcs {
+	status = "okay";
+	phys = <&combphy2 PHY_TYPE_SGMII>;
+	phy-names = "serdes";
+};
+
+&xpcs_mii0 {
+	status = "okay";
+};
-- 
2.47.3