Add the ethernet nodes along with their serdes PHY nodes for the gearvm variant of the lemans ride board. Enable scmi7 and scmi8 to serve the EMACs. Signed-off-by: Bartosz Golaszewski --- arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi | 34 ++++ arch/arm64/boot/dts/qcom/lemans-sa8255p-ride.dts | 201 +++++++++++++++++++++++ 2 files changed, 235 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi b/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi index 91c97a55f2787406b104650956b9a511a6a34c23..aaa8d96dfa61984afaeb13d7543140dd1724979d 100644 --- a/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi +++ b/arch/arm64/boot/dts/qcom/lemans-gearvm.dtsi @@ -58,6 +58,22 @@ &cpufreq_hw { clock-names = "xo", "alternate"; }; +ðernet0 { + compatible = "qcom,sa8255p-ethqos"; + phys = <&serdes0>; + phy-names = "serdes"; + power-domains = <&scmi7_pd 0>, <&scmi7_pd 1>; + power-domain-names = "core", "mdio"; +}; + +ðernet1 { + compatible = "qcom,sa8255p-ethqos"; + phys = <&serdes1>; + phy-names = "serdes"; + power-domains = <&scmi8_pd 0>, <&scmi8_pd 1>; + power-domain-names = "core", "mdio"; +}; + &firmware { scmi0: scmi-0 { compatible = "qcom,scmi-smc"; @@ -2898,6 +2914,24 @@ &scm { memory-region = <&tz_ffi_mem>; }; +&soc { + serdes0: phy@8901000 { + compatible = "qcom,sa8255p-dwmac-sgmii-phy"; + reg = <0x0 0x08901000 0x0 0xe10>; + #phy-cells = <0>; + power-domains = <&scmi7_dvfs 0>; + status = "disabled"; + }; + + serdes1: phy@8902000 { + compatible = "qcom,sa8255p-dwmac-sgmii-phy"; + reg = <0x0 0x08902000 0x0 0xe10>; + #phy-cells = <0>; + power-domains = <&scmi8_dvfs 0>; + status = "disabled"; + }; +}; + &spi0 { compatible = "qcom,sa8255p-geni-spi"; power-domains = <&scmi10_pd 0>, diff --git a/arch/arm64/boot/dts/qcom/lemans-sa8255p-ride.dts b/arch/arm64/boot/dts/qcom/lemans-sa8255p-ride.dts index 6f19064997a4b50525fdf630307b843604368645..991626589cc34112df6e024d988bf87e6f520017 100644 --- a/arch/arm64/boot/dts/qcom/lemans-sa8255p-ride.dts +++ b/arch/arm64/boot/dts/qcom/lemans-sa8255p-ride.dts @@ -14,6 +14,8 @@ / { compatible = "qcom,sa8255p-ride", "qcom,sa8255p"; aliases { + ethernet0 = ðernet0; + ethernet1 = ðernet1; serial0 = &uart10; serial1 = &uart4; }; @@ -101,6 +103,173 @@ trip1 { }; }; +ðernet0 { + phy-handle = <&hsgmii_phy0>; + phy-mode = "2500base-x"; + + pinctrl-0 = <ðernet0_default>; + pinctrl-names = "default"; + + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; + snps,ps-speed = <2500>; + + status = "okay"; + + mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + + hsgmii_phy0: phy@8 { + compatible = "ethernet-phy-id31c3.1c33"; + reg = <0x8>; + device_type = "ethernet-phy"; + resets = <&scmi7_rst 0>; + reset-names = "phy"; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + + hsgmii_phy1: phy@0 { + compatible = "ethernet-phy-id31c3.1c33"; + reg = <0x0>; + device_type = "ethernet-phy"; + resets = <&scmi8_rst 0>; + reset-names = "phy"; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; + }; + + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + +ðernet1 { + phy-mode = "2500base-x"; + phy-handle = <&hsgmii_phy1>; + + snps,mtl-rx-config = <&mtl_rx_setup1>; + snps,mtl-tx-config = <&mtl_tx_setup1>; + snps,ps-speed = <2500>; + + status = "okay"; + + mtl_rx_setup1: rx-queues-config { + snps,rx-queues-to-use = <4>; + snps,rx-sched-sp; + + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + snps,route-up; + snps,priority = <0x1>; + }; + + queue1 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x1>; + snps,route-ptp; + }; + + queue2 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x2>; + snps,route-avcp; + }; + + queue3 { + snps,avb-algorithm; + snps,map-to-dma-channel = <0x3>; + snps,priority = <0xc>; + }; + }; + + mtl_tx_setup1: tx-queues-config { + snps,tx-queues-to-use = <4>; + + queue0 { + snps,dcb-algorithm; + }; + + queue1 { + snps,dcb-algorithm; + }; + + queue2 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + + queue3 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3e800>; + snps,low_credit = <0xffc18000>; + }; + }; +}; + &gpll0_board_clk { clock-frequency = <300000000>; }; @@ -145,6 +314,14 @@ &scmi6 { status = "okay"; }; +&scmi7 { + status = "okay"; +}; + +&scmi8 { + status = "okay"; +}; + &scmi11 { status = "okay"; }; @@ -162,6 +339,22 @@ &sleep_clk { }; &tlmm { + ethernet0_default: ethernet0-default-state { + ethernet0_mdc: ethernet0-mdc-pins { + pins = "gpio8"; + function = "emac0_mdc"; + drive-strength = <16>; + bias-pull-up; + }; + + ethernet0_mdio: ethernet0-mdio-pins { + pins = "gpio9"; + function = "emac0_mdio"; + drive-strength = <16>; + bias-pull-up; + }; + }; + pcie0_ep_clkreq_default: pcie0-ep-clkreq-default-state { pins = "gpio1"; function = "pcie0_clkreq"; @@ -205,6 +398,14 @@ pcie1_ep_wake_default: pcie1-ep-wake-default-state { }; }; +&serdes0 { + status = "okay"; +}; + +&serdes1 { + status = "okay"; +}; + &uart4 { status = "okay"; }; -- 2.47.3