From: Chaosheng Qu ifi_canfd_plat_probe() maps every failure of platform_get_irq() to -EINVAL: irq = platform_get_irq(pdev, 0); if (irq < 0) return -EINVAL; The driver matches through an of_match_table ("ifi,canfd-1.0"), so of_irq_get() returns -EPROBE_DEFER while the interrupt controller has not been probed. The probe overwrites it and the driver core stops retrying, leaving the device unbound even though the interrupt controller appears later. Return the lookup error unchanged, as the neighbouring CAN platform drivers do, e.g. previous commit ("can: cc770: don't discard the IRQ lookup error in probe"). A device tree without an interrupt now reports -ENXIO rather than -EINVAL; the driver core treats both as a failed probe. Build tested on x86_64. Signed-off-by: Chaosheng Qu Link: https://patch.msgid.link/165f3fccb8faf1db65e8f18dbee4694c95266e31.1792118040.git.chaosheng.qu.linux@gmail.com Signed-off-by: Marc Kleine-Budde --- drivers/net/can/ifi_canfd/ifi_canfd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/can/ifi_canfd/ifi_canfd.c b/drivers/net/can/ifi_canfd/ifi_canfd.c index 9eecfe5a87bd..e0f5abd934fa 100644 --- a/drivers/net/can/ifi_canfd/ifi_canfd.c +++ b/drivers/net/can/ifi_canfd/ifi_canfd.c @@ -965,7 +965,7 @@ static int ifi_canfd_plat_probe(struct platform_device *pdev) irq = platform_get_irq(pdev, 0); if (irq < 0) - return -EINVAL; + return irq; id = readl(addr + IFI_CANFD_IP_ID); if (id != IFI_CANFD_IP_ID_VALUE) { -- 2.53.0