Move all parts specific for the MMIO/SoC driver into a module of its own to prepare for supporting MDIO-connected switch ICs. Modify gswip_probe() functions by splitting it into a common function gswip_probe_common() which covers allocating, initializing and registering the DSA switch, while keeping transport-specific regmap initialization as well as PHY firmware loading in the new MMIO/SoC-specific gswip_probe() function. Signed-off-by: Daniel Golle --- drivers/net/dsa/lantiq/Kconfig | 6 +- drivers/net/dsa/lantiq/Makefile | 1 + drivers/net/dsa/lantiq/lantiq_gswip.c | 1617 +---------------- drivers/net/dsa/lantiq/lantiq_gswip.h | 4 + drivers/net/dsa/lantiq/lantiq_gswip_common.c | 1622 ++++++++++++++++++ 5 files changed, 1658 insertions(+), 1592 deletions(-) create mode 100644 drivers/net/dsa/lantiq/lantiq_gswip_common.c diff --git a/drivers/net/dsa/lantiq/Kconfig b/drivers/net/dsa/lantiq/Kconfig index 3cfa16840cf5..78db82a47d09 100644 --- a/drivers/net/dsa/lantiq/Kconfig +++ b/drivers/net/dsa/lantiq/Kconfig @@ -1,8 +1,12 @@ +config NET_DSA_LANTIQ_COMMON + tristate + select REGMAP + config NET_DSA_LANTIQ_GSWIP tristate "Lantiq / Intel GSWIP" depends on HAS_IOMEM select NET_DSA_TAG_GSWIP - select REGMAP + select NET_DSA_LANTIQ_COMMON help This enables support for the Lantiq / Intel GSWIP 2.1 found in the xrx200 / VR9 SoC. diff --git a/drivers/net/dsa/lantiq/Makefile b/drivers/net/dsa/lantiq/Makefile index 849f85ebebd6..65ffa7bb71aa 100644 --- a/drivers/net/dsa/lantiq/Makefile +++ b/drivers/net/dsa/lantiq/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_NET_DSA_LANTIQ_GSWIP) += lantiq_gswip.o +obj-$(CONFIG_NET_DSA_LANTIQ_COMMON) += lantiq_gswip_common.o diff --git a/drivers/net/dsa/lantiq/lantiq_gswip.c b/drivers/net/dsa/lantiq/lantiq_gswip.c index 38f7f6352e8d..57dd063c0740 100644 --- a/drivers/net/dsa/lantiq/lantiq_gswip.c +++ b/drivers/net/dsa/lantiq/lantiq_gswip.c @@ -2,1226 +2,32 @@ /* * Lantiq / Intel GSWIP switch driver for VRX200, xRX300 and xRX330 SoCs * - * Copyright (C) 2010 Lantiq Deutschland - * Copyright (C) 2012 John Crispin - * Copyright (C) 2017 - 2019 Hauke Mehrtens - * - * The VLAN and bridge model the GSWIP hardware uses does not directly - * matches the model DSA uses. - * - * The hardware has 64 possible table entries for bridges with one VLAN - * ID, one flow id and a list of ports for each bridge. All entries which - * match the same flow ID are combined in the mac learning table, they - * act as one global bridge. - * The hardware does not support VLAN filter on the port, but on the - * bridge, this driver converts the DSA model to the hardware. - * - * The CPU gets all the exception frames which do not match any forwarding - * rule and the CPU port is also added to all bridges. This makes it possible - * to handle all the special cases easily in software. - * At the initialization the driver allocates one bridge table entry for - * each switch port which is used when the port is used without an - * explicit bridge. This prevents the frames from being forwarded - * between all LAN ports by default. - */ - -#include "lantiq_gswip.h" -#include "lantiq_pce.h" - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -struct xway_gphy_match_data { - char *fe_firmware_name; - char *ge_firmware_name; -}; - -struct gswip_pce_table_entry { - u16 index; // PCE_TBL_ADDR.ADDR = pData->table_index - u16 table; // PCE_TBL_CTRL.ADDR = pData->table - u16 key[8]; - u16 val[5]; - u16 mask; - u8 gmap; - bool type; - bool valid; - bool key_mode; -}; - -struct gswip_rmon_cnt_desc { - unsigned int size; - unsigned int offset; - const char *name; -}; - -#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name} - -static const struct gswip_rmon_cnt_desc gswip_rmon_cnt[] = { - /** Receive Packet Count (only packets that are accepted and not discarded). */ - MIB_DESC(1, 0x1F, "RxGoodPkts"), - MIB_DESC(1, 0x23, "RxUnicastPkts"), - MIB_DESC(1, 0x22, "RxMulticastPkts"), - MIB_DESC(1, 0x21, "RxFCSErrorPkts"), - MIB_DESC(1, 0x1D, "RxUnderSizeGoodPkts"), - MIB_DESC(1, 0x1E, "RxUnderSizeErrorPkts"), - MIB_DESC(1, 0x1B, "RxOversizeGoodPkts"), - MIB_DESC(1, 0x1C, "RxOversizeErrorPkts"), - MIB_DESC(1, 0x20, "RxGoodPausePkts"), - MIB_DESC(1, 0x1A, "RxAlignErrorPkts"), - MIB_DESC(1, 0x12, "Rx64BytePkts"), - MIB_DESC(1, 0x13, "Rx127BytePkts"), - MIB_DESC(1, 0x14, "Rx255BytePkts"), - MIB_DESC(1, 0x15, "Rx511BytePkts"), - MIB_DESC(1, 0x16, "Rx1023BytePkts"), - /** Receive Size 1024-1522 (or more, if configured) Packet Count. */ - MIB_DESC(1, 0x17, "RxMaxBytePkts"), - MIB_DESC(1, 0x18, "RxDroppedPkts"), - MIB_DESC(1, 0x19, "RxFilteredPkts"), - MIB_DESC(2, 0x24, "RxGoodBytes"), - MIB_DESC(2, 0x26, "RxBadBytes"), - MIB_DESC(1, 0x11, "TxAcmDroppedPkts"), - MIB_DESC(1, 0x0C, "TxGoodPkts"), - MIB_DESC(1, 0x06, "TxUnicastPkts"), - MIB_DESC(1, 0x07, "TxMulticastPkts"), - MIB_DESC(1, 0x00, "Tx64BytePkts"), - MIB_DESC(1, 0x01, "Tx127BytePkts"), - MIB_DESC(1, 0x02, "Tx255BytePkts"), - MIB_DESC(1, 0x03, "Tx511BytePkts"), - MIB_DESC(1, 0x04, "Tx1023BytePkts"), - /** Transmit Size 1024-1522 (or more, if configured) Packet Count. */ - MIB_DESC(1, 0x05, "TxMaxBytePkts"), - MIB_DESC(1, 0x08, "TxSingleCollCount"), - MIB_DESC(1, 0x09, "TxMultCollCount"), - MIB_DESC(1, 0x0A, "TxLateCollCount"), - MIB_DESC(1, 0x0B, "TxExcessCollCount"), - MIB_DESC(1, 0x0D, "TxPauseCount"), - MIB_DESC(1, 0x10, "TxDroppedPkts"), - MIB_DESC(2, 0x0E, "TxGoodBytes"), -}; - -static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset, - u32 cleared) -{ - u32 val; - - return regmap_read_poll_timeout(priv->gswip, offset, val, - !(val & cleared), 20, 50000); -} - -static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 mask, u32 set, - int port) -{ - int reg_port; - - /* MII_CFG register only exists for MII ports */ - if (!(priv->hw_info->mii_ports & BIT(port))) - return; - - reg_port = port + priv->hw_info->mii_port_reg_offset; - - regmap_write_bits(priv->mii, GSWIP_MII_CFGp(reg_port), mask, - set); -} - -static void gswip_mii_mask_pcdu(struct gswip_priv *priv, u32 mask, u32 set, - int port) -{ - int reg_port; - - /* MII_PCDU register only exists for MII ports */ - if (!(priv->hw_info->mii_ports & BIT(port))) - return; - - reg_port = port + priv->hw_info->mii_port_reg_offset; - - switch (reg_port) { - case 0: - regmap_write_bits(priv->mii, GSWIP_MII_PCDU0, mask, set); - break; - case 1: - regmap_write_bits(priv->mii, GSWIP_MII_PCDU1, mask, set); - break; - case 5: - regmap_write_bits(priv->mii, GSWIP_MII_PCDU5, mask, set); - break; - } -} - -static int gswip_mdio_poll(struct gswip_priv *priv) -{ - u32 ctrl; - - return regmap_read_poll_timeout(priv->mdio, GSWIP_MDIO_CTRL, ctrl, - !(ctrl & GSWIP_MDIO_CTRL_BUSY), 40, 4000); -} - -static int gswip_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) -{ - struct gswip_priv *priv = bus->priv; - int err; - - err = gswip_mdio_poll(priv); - if (err) { - dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); - return err; - } - - regmap_write(priv->mdio, GSWIP_MDIO_WRITE, val); - regmap_write(priv->mdio, GSWIP_MDIO_CTRL, - GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_WR | - ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | - (reg & GSWIP_MDIO_CTRL_REGAD_MASK)); - - return 0; -} - -static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg) -{ - struct gswip_priv *priv = bus->priv; - u32 val; - int err; - - err = gswip_mdio_poll(priv); - if (err) { - dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); - return err; - } - - regmap_write(priv->mdio, GSWIP_MDIO_CTRL, - GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_RD | - ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | - (reg & GSWIP_MDIO_CTRL_REGAD_MASK)); - - err = gswip_mdio_poll(priv); - if (err) { - dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); - return err; - } - - err = regmap_read(priv->mdio, GSWIP_MDIO_READ, &val); - if (err) - return err; - - return val; -} - -static int gswip_mdio(struct gswip_priv *priv) -{ - struct device_node *mdio_np, *switch_np = priv->dev->of_node; - struct device *dev = priv->dev; - struct mii_bus *bus; - int err = 0; - - mdio_np = of_get_compatible_child(switch_np, "lantiq,xrx200-mdio"); - if (!mdio_np) - mdio_np = of_get_child_by_name(switch_np, "mdio"); - - if (!of_device_is_available(mdio_np)) - goto out_put_node; - - bus = devm_mdiobus_alloc(dev); - if (!bus) { - err = -ENOMEM; - goto out_put_node; - } - - bus->priv = priv; - bus->read = gswip_mdio_rd; - bus->write = gswip_mdio_wr; - bus->name = "lantiq,xrx200-mdio"; - snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(priv->dev)); - bus->parent = priv->dev; - - err = devm_of_mdiobus_register(dev, bus, mdio_np); - -out_put_node: - of_node_put(mdio_np); - - return err; -} - -static int gswip_pce_table_entry_read(struct gswip_priv *priv, - struct gswip_pce_table_entry *tbl) -{ - int i; - int err; - u32 crtl; - u32 tmp; - u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSRD : - GSWIP_PCE_TBL_CTRL_OPMOD_ADRD; - - mutex_lock(&priv->pce_table_lock); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) - goto out_unlock; - - regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, tbl->index); - regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK | - GSWIP_PCE_TBL_CTRL_BAS, - tbl->table | addr_mode | GSWIP_PCE_TBL_CTRL_BAS); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) - goto out_unlock; - - for (i = 0; i < ARRAY_SIZE(tbl->key); i++) { - err = regmap_read(priv->gswip, GSWIP_PCE_TBL_KEY(i), &tmp); - if (err) - goto out_unlock; - tbl->key[i] = tmp; - } - for (i = 0; i < ARRAY_SIZE(tbl->val); i++) { - err = regmap_read(priv->gswip, GSWIP_PCE_TBL_VAL(i), &tmp); - if (err) - goto out_unlock; - tbl->val[i] = tmp; - } - - err = regmap_read(priv->gswip, GSWIP_PCE_TBL_MASK, &tmp); - if (err) - goto out_unlock; - - tbl->mask = tmp; - err = regmap_read(priv->gswip, GSWIP_PCE_TBL_CTRL, &crtl); - if (err) - goto out_unlock; - - tbl->type = !!(crtl & GSWIP_PCE_TBL_CTRL_TYPE); - tbl->valid = !!(crtl & GSWIP_PCE_TBL_CTRL_VLD); - tbl->gmap = (crtl & GSWIP_PCE_TBL_CTRL_GMAP_MASK) >> 7; - -out_unlock: - mutex_unlock(&priv->pce_table_lock); - - return err; -} - -static int gswip_pce_table_entry_write(struct gswip_priv *priv, - struct gswip_pce_table_entry *tbl) -{ - int i; - int err; - u32 crtl; - u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSWR : - GSWIP_PCE_TBL_CTRL_OPMOD_ADWR; - - mutex_lock(&priv->pce_table_lock); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) { - mutex_unlock(&priv->pce_table_lock); - return err; - } - - regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, tbl->index); - regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - tbl->table | addr_mode); - - for (i = 0; i < ARRAY_SIZE(tbl->key); i++) - regmap_write(priv->gswip, GSWIP_PCE_TBL_KEY(i), tbl->key[i]); - - for (i = 0; i < ARRAY_SIZE(tbl->val); i++) - regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(i), tbl->val[i]); - - regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK, - tbl->table | addr_mode); - - regmap_write(priv->gswip, GSWIP_PCE_TBL_MASK, tbl->mask); - - regmap_read(priv->gswip, GSWIP_PCE_TBL_CTRL, &crtl); - crtl &= ~(GSWIP_PCE_TBL_CTRL_TYPE | GSWIP_PCE_TBL_CTRL_VLD | - GSWIP_PCE_TBL_CTRL_GMAP_MASK); - if (tbl->type) - crtl |= GSWIP_PCE_TBL_CTRL_TYPE; - if (tbl->valid) - crtl |= GSWIP_PCE_TBL_CTRL_VLD; - crtl |= (tbl->gmap << 7) & GSWIP_PCE_TBL_CTRL_GMAP_MASK; - crtl |= GSWIP_PCE_TBL_CTRL_BAS; - regmap_write(priv->gswip, GSWIP_PCE_TBL_CTRL, crtl); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - - mutex_unlock(&priv->pce_table_lock); - - return err; -} - -/* Add the LAN port into a bridge with the CPU port by - * default. This prevents automatic forwarding of - * packages between the LAN ports when no explicit - * bridge is configured. - */ -static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add) -{ - struct gswip_pce_table_entry vlan_active = {0,}; - struct gswip_pce_table_entry vlan_mapping = {0,}; - int err; - - vlan_active.index = port + 1; - vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; - vlan_active.key[0] = GSWIP_VLAN_UNAWARE_PVID; - vlan_active.val[0] = port + 1 /* fid */; - vlan_active.valid = add; - err = gswip_pce_table_entry_write(priv, &vlan_active); - if (err) { - dev_err(priv->dev, "failed to write active VLAN: %d\n", err); - return err; - } - - if (!add) - return 0; - - vlan_mapping.index = port + 1; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - vlan_mapping.val[0] = GSWIP_VLAN_UNAWARE_PVID; - vlan_mapping.val[1] = BIT(port) | dsa_cpu_ports(priv->ds); - vlan_mapping.val[2] = 0; - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - return err; - } - - return 0; -} - -static int gswip_port_setup(struct dsa_switch *ds, int port) -{ - struct gswip_priv *priv = ds->priv; - int err; - - if (!dsa_is_cpu_port(ds, port)) { - err = gswip_add_single_port_br(priv, port, true); - if (err) - return err; - } - - return 0; -} - -static int gswip_port_enable(struct dsa_switch *ds, int port, - struct phy_device *phydev) -{ - struct gswip_priv *priv = ds->priv; - - if (!dsa_is_cpu_port(ds, port)) { - u32 mdio_phy = 0; - - if (phydev) - mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; - - regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), - GSWIP_MDIO_PHY_ADDR_MASK, - mdio_phy); - } - - /* RMON Counter Enable for port */ - regmap_write(priv->gswip, GSWIP_BM_PCFGp(port), GSWIP_BM_PCFG_CNTEN); - - /* enable port fetch/store dma & VLAN Modification */ - regmap_set_bits(priv->gswip, GSWIP_FDMA_PCTRLp(port), - GSWIP_FDMA_PCTRL_EN | GSWIP_FDMA_PCTRL_VLANMOD_BOTH); - regmap_set_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), - GSWIP_SDMA_PCTRL_EN); - - return 0; -} - -static void gswip_port_disable(struct dsa_switch *ds, int port) -{ - struct gswip_priv *priv = ds->priv; - - regmap_clear_bits(priv->gswip, GSWIP_FDMA_PCTRLp(port), - GSWIP_FDMA_PCTRL_EN); - regmap_clear_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), - GSWIP_SDMA_PCTRL_EN); -} - -static int gswip_pce_load_microcode(struct gswip_priv *priv) -{ - int i; - int err; - - regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_ADDR_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_MASK | - GSWIP_PCE_TBL_CTRL_OPMOD_ADWR, - GSWIP_PCE_TBL_CTRL_OPMOD_ADWR); - regmap_write(priv->gswip, GSWIP_PCE_TBL_MASK, 0); - - for (i = 0; i < priv->hw_info->pce_microcode_size; i++) { - regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, i); - regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(0), - (*priv->hw_info->pce_microcode)[i].val_0); - regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(1), - (*priv->hw_info->pce_microcode)[i].val_1); - regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(2), - (*priv->hw_info->pce_microcode)[i].val_2); - regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(3), - (*priv->hw_info->pce_microcode)[i].val_3); - - /* start the table access: */ - regmap_set_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, - GSWIP_PCE_TBL_CTRL_BAS); - if (err) - return err; - } - - /* tell the switch that the microcode is loaded */ - regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, - GSWIP_PCE_GCTRL_0_MC_VALID); - - return 0; -} - -static void gswip_port_commit_pvid(struct gswip_priv *priv, int port) -{ - struct dsa_port *dp = dsa_to_port(priv->ds, port); - struct net_device *br = dsa_port_bridge_dev_get(dp); - u32 vinr; - int idx; - - if (!dsa_port_is_user(dp)) - return; - - if (br) { - u16 pvid = GSWIP_VLAN_UNAWARE_PVID; - - if (br_vlan_enabled(br)) - br_vlan_get_pvid(br, &pvid); - - /* VLAN-aware bridge ports with no PVID will use Active VLAN - * index 0. The expectation is that this drops all untagged and - * VID-0 tagged ingress traffic. - */ - idx = 0; - for (int i = priv->hw_info->max_ports; - i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == br && - priv->vlans[i].vid == pvid) { - idx = i; - break; - } - } - } else { - /* The Active VLAN table index as configured by - * gswip_add_single_port_br() - */ - idx = port + 1; - } - - vinr = idx ? GSWIP_PCE_VCTRL_VINR_ALL : GSWIP_PCE_VCTRL_VINR_TAGGED; - regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), - GSWIP_PCE_VCTRL_VINR, - FIELD_PREP(GSWIP_PCE_VCTRL_VINR, vinr)); - - /* Note that in GSWIP 2.2 VLAN mode the VID needs to be programmed - * directly instead of referencing the index in the Active VLAN Tablet. - * However, without the VLANMD bit (9) in PCE_GCTRL_1 (0x457) even - * GSWIP 2.2 and newer hardware maintain the GSWIP 2.1 behavior. - */ - regmap_write(priv->gswip, GSWIP_PCE_DEFPVID(port), idx); -} - -static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port, - bool vlan_filtering, - struct netlink_ext_ack *extack) -{ - struct gswip_priv *priv = ds->priv; - - if (vlan_filtering) { - /* Use tag based VLAN */ - regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), - GSWIP_PCE_VCTRL_VSR | - GSWIP_PCE_VCTRL_UVR | - GSWIP_PCE_VCTRL_VIMR | - GSWIP_PCE_VCTRL_VEMR | - GSWIP_PCE_VCTRL_VID0, - GSWIP_PCE_VCTRL_UVR | - GSWIP_PCE_VCTRL_VIMR | - GSWIP_PCE_VCTRL_VEMR | - GSWIP_PCE_VCTRL_VID0); - regmap_clear_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), - GSWIP_PCE_PCTRL_0_TVM); - } else { - /* Use port based VLAN */ - regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), - GSWIP_PCE_VCTRL_UVR | - GSWIP_PCE_VCTRL_VIMR | - GSWIP_PCE_VCTRL_VEMR | - GSWIP_PCE_VCTRL_VID0 | - GSWIP_PCE_VCTRL_VSR, - GSWIP_PCE_VCTRL_VSR); - regmap_set_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), - GSWIP_PCE_PCTRL_0_TVM); - } - - gswip_port_commit_pvid(priv, port); - - return 0; -} - -static int gswip_setup(struct dsa_switch *ds) -{ - unsigned int cpu_ports = dsa_cpu_ports(ds); - struct gswip_priv *priv = ds->priv; - struct dsa_port *cpu_dp; - int err, i; - - regmap_write(priv->gswip, GSWIP_SWRES, GSWIP_SWRES_R0); - usleep_range(5000, 10000); - regmap_write(priv->gswip, GSWIP_SWRES, 0); - - /* disable port fetch/store dma on all ports */ - for (i = 0; i < priv->hw_info->max_ports; i++) { - gswip_port_disable(ds, i); - gswip_port_vlan_filtering(ds, i, false, NULL); - } - - /* enable Switch */ - regmap_set_bits(priv->mdio, GSWIP_MDIO_GLOB, GSWIP_MDIO_GLOB_ENABLE); - - err = gswip_pce_load_microcode(priv); - if (err) { - dev_err(priv->dev, "writing PCE microcode failed, %i\n", err); - return err; - } - - /* Default unknown Broadcast/Multicast/Unicast port maps */ - regmap_write(priv->gswip, GSWIP_PCE_PMAP1, cpu_ports); - regmap_write(priv->gswip, GSWIP_PCE_PMAP2, cpu_ports); - regmap_write(priv->gswip, GSWIP_PCE_PMAP3, cpu_ports); - - /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an - * interoperability problem with this auto polling mechanism because - * their status registers think that the link is in a different state - * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set - * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the - * auto polling state machine consider the link being negotiated with - * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads - * to the switch port being completely dead (RX and TX are both not - * working). - * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F - * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes - * it would work fine for a few minutes to hours and then stop, on - * other device it would no traffic could be sent or received at all. - * Testing shows that when PHY auto polling is disabled these problems - * go away. - */ - regmap_write(priv->mdio, GSWIP_MDIO_MDC_CFG0, 0x0); - - /* Configure the MDIO Clock 2.5 MHz */ - regmap_write_bits(priv->mdio, GSWIP_MDIO_MDC_CFG1, 0xff, 0x09); - - /* bring up the mdio bus */ - err = gswip_mdio(priv); - if (err) { - dev_err(priv->dev, "mdio bus setup failed\n"); - return err; - } - - /* Disable the xMII interface and clear it's isolation bit */ - for (i = 0; i < priv->hw_info->max_ports; i++) - gswip_mii_mask_cfg(priv, - GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE, - 0, i); - - dsa_switch_for_each_cpu_port(cpu_dp, ds) { - /* enable special tag insertion on cpu port */ - regmap_set_bits(priv->gswip, GSWIP_FDMA_PCTRLp(cpu_dp->index), - GSWIP_FDMA_PCTRL_STEN); - - /* accept special tag in ingress direction */ - regmap_set_bits(priv->gswip, - GSWIP_PCE_PCTRL_0p(cpu_dp->index), - GSWIP_PCE_PCTRL_0_INGRESS); - } - - regmap_set_bits(priv->gswip, GSWIP_BM_QUEUE_GCTRL, - GSWIP_BM_QUEUE_GCTRL_GL_MOD); - - /* VLAN aware Switching */ - regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, - GSWIP_PCE_GCTRL_0_VLAN); - - /* Flush MAC Table */ - regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, - GSWIP_PCE_GCTRL_0_MTFL); - - err = gswip_switch_r_timeout(priv, GSWIP_PCE_GCTRL_0, - GSWIP_PCE_GCTRL_0_MTFL); - if (err) { - dev_err(priv->dev, "MAC flushing didn't finish\n"); - return err; - } - - ds->mtu_enforcement_ingress = true; - - return 0; -} - -static enum dsa_tag_protocol gswip_get_tag_protocol(struct dsa_switch *ds, - int port, - enum dsa_tag_protocol mp) -{ - struct gswip_priv *priv = ds->priv; - - return priv->hw_info->tag_protocol; -} - -static int gswip_vlan_active_create(struct gswip_priv *priv, - struct net_device *bridge, - int fid, u16 vid) -{ - struct gswip_pce_table_entry vlan_active = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - int idx = -1; - int err; - int i; - - /* Look for a free slot */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (!priv->vlans[i].bridge) { - idx = i; - break; - } - } - - if (idx == -1) - return -ENOSPC; - - if (fid == -1) - fid = idx; - - vlan_active.index = idx; - vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; - vlan_active.key[0] = vid; - vlan_active.val[0] = fid; - vlan_active.valid = true; - - err = gswip_pce_table_entry_write(priv, &vlan_active); - if (err) { - dev_err(priv->dev, "failed to write active VLAN: %d\n", err); - return err; - } - - priv->vlans[idx].bridge = bridge; - priv->vlans[idx].vid = vid; - priv->vlans[idx].fid = fid; - - return idx; -} - -static int gswip_vlan_active_remove(struct gswip_priv *priv, int idx) -{ - struct gswip_pce_table_entry vlan_active = {0,}; - int err; - - vlan_active.index = idx; - vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; - vlan_active.valid = false; - err = gswip_pce_table_entry_write(priv, &vlan_active); - if (err) - dev_err(priv->dev, "failed to delete active VLAN: %d\n", err); - priv->vlans[idx].bridge = NULL; - - return err; -} - -static int gswip_vlan_add(struct gswip_priv *priv, struct net_device *bridge, - int port, u16 vid, bool untagged, bool pvid, - bool vlan_aware) -{ - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - unsigned int cpu_ports = dsa_cpu_ports(priv->ds); - bool active_vlan_created = false; - int fid = -1, idx = -1; - int i, err; - - /* Check if there is already a page for this bridge */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge) { - if (vlan_aware) { - if (fid != -1 && fid != priv->vlans[i].fid) - dev_err(priv->dev, "one bridge with multiple flow ids\n"); - fid = priv->vlans[i].fid; - } - if (priv->vlans[i].vid == vid) { - idx = i; - break; - } - } - } - - /* If this bridge is not programmed yet, add a Active VLAN table - * entry in a free slot and prepare the VLAN mapping table entry. - */ - if (idx == -1) { - idx = gswip_vlan_active_create(priv, bridge, fid, vid); - if (idx < 0) - return idx; - active_vlan_created = true; - - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - } else { - /* Read the existing VLAN mapping entry from the switch */ - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - err = gswip_pce_table_entry_read(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to read VLAN mapping: %d\n", - err); - return err; - } - } - - /* VLAN ID byte, maps to the VLAN ID of vlan active table */ - vlan_mapping.val[0] = vid; - /* Update the VLAN mapping entry and write it to the switch */ - vlan_mapping.val[1] |= cpu_ports; - vlan_mapping.val[1] |= BIT(port); - if (vlan_aware) - vlan_mapping.val[2] |= cpu_ports; - if (untagged) - vlan_mapping.val[2] &= ~BIT(port); - else - vlan_mapping.val[2] |= BIT(port); - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - /* In case an Active VLAN was creaetd delete it again */ - if (active_vlan_created) - gswip_vlan_active_remove(priv, idx); - return err; - } - - gswip_port_commit_pvid(priv, port); - - return 0; -} - -static int gswip_vlan_remove(struct gswip_priv *priv, - struct net_device *bridge, int port, - u16 vid) -{ - struct gswip_pce_table_entry vlan_mapping = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - int idx = -1; - int i; - int err; - - /* Check if there is already a page for this bridge */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge && - priv->vlans[i].vid == vid) { - idx = i; - break; - } - } - - if (idx == -1) { - dev_err(priv->dev, "Port %d cannot find VID %u of bridge %s\n", - port, vid, bridge ? bridge->name : "(null)"); - return -ENOENT; - } - - vlan_mapping.index = idx; - vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; - err = gswip_pce_table_entry_read(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to read VLAN mapping: %d\n", err); - return err; - } - - vlan_mapping.val[1] &= ~BIT(port); - vlan_mapping.val[2] &= ~BIT(port); - err = gswip_pce_table_entry_write(priv, &vlan_mapping); - if (err) { - dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); - return err; - } - - /* In case all ports are removed from the bridge, remove the VLAN */ - if (!(vlan_mapping.val[1] & ~dsa_cpu_ports(priv->ds))) { - err = gswip_vlan_active_remove(priv, idx); - if (err) { - dev_err(priv->dev, "failed to write active VLAN: %d\n", - err); - return err; - } - } - - gswip_port_commit_pvid(priv, port); - - return 0; -} - -static int gswip_port_bridge_join(struct dsa_switch *ds, int port, - struct dsa_bridge bridge, - bool *tx_fwd_offload, - struct netlink_ext_ack *extack) -{ - struct net_device *br = bridge.dev; - struct gswip_priv *priv = ds->priv; - int err; - - /* Set up the VLAN for VLAN-unaware bridging for this port, and remove - * it from the "single-port bridge" through which it was operating as - * standalone. - */ - err = gswip_vlan_add(priv, br, port, GSWIP_VLAN_UNAWARE_PVID, - true, true, false); - if (err) - return err; - - return gswip_add_single_port_br(priv, port, false); -} - -static void gswip_port_bridge_leave(struct dsa_switch *ds, int port, - struct dsa_bridge bridge) -{ - struct net_device *br = bridge.dev; - struct gswip_priv *priv = ds->priv; - - /* Add the port back to the "single-port bridge", and remove it from - * the VLAN-unaware PVID created for this bridge. - */ - gswip_add_single_port_br(priv, port, true); - gswip_vlan_remove(priv, br, port, GSWIP_VLAN_UNAWARE_PVID); -} - -static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan, - struct netlink_ext_ack *extack) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - unsigned int max_ports = priv->hw_info->max_ports; - int pos = max_ports; - int i, idx = -1; - - /* We only support VLAN filtering on bridges */ - if (!dsa_is_cpu_port(ds, port) && !bridge) - return -EOPNOTSUPP; - - /* Check if there is already a page for this VLAN */ - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge && - priv->vlans[i].vid == vlan->vid) { - idx = i; - break; - } - } - - /* If this VLAN is not programmed yet, we have to reserve - * one entry in the VLAN table. Make sure we start at the - * next position round. - */ - if (idx == -1) { - /* Look for a free slot */ - for (; pos < ARRAY_SIZE(priv->vlans); pos++) { - if (!priv->vlans[pos].bridge) { - idx = pos; - pos++; - break; - } - } - - if (idx == -1) { - NL_SET_ERR_MSG_MOD(extack, "No slot in VLAN table"); - return -ENOSPC; - } - } - - return 0; -} - -static int gswip_port_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan, - struct netlink_ext_ack *extack) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; - bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; - int err; - - if (vlan->vid == GSWIP_VLAN_UNAWARE_PVID) - return 0; - - err = gswip_port_vlan_prepare(ds, port, vlan, extack); - if (err) - return err; - - /* We have to receive all packets on the CPU port and should not - * do any VLAN filtering here. This is also called with bridge - * NULL and then we do not know for which bridge to configure - * this. - */ - if (dsa_is_cpu_port(ds, port)) - return 0; - - return gswip_vlan_add(priv, bridge, port, vlan->vid, untagged, pvid, - true); -} - -static int gswip_port_vlan_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); - struct gswip_priv *priv = ds->priv; - - if (vlan->vid == GSWIP_VLAN_UNAWARE_PVID) - return 0; - - /* We have to receive all packets on the CPU port and should not - * do any VLAN filtering here. This is also called with bridge - * NULL and then we do not know for which bridge to configure - * this. - */ - if (dsa_is_cpu_port(ds, port)) - return 0; - - return gswip_vlan_remove(priv, bridge, port, vlan->vid); -} - -static void gswip_port_fast_age(struct dsa_switch *ds, int port) -{ - struct gswip_priv *priv = ds->priv; - struct gswip_pce_table_entry mac_bridge = {0,}; - int i; - int err; - - for (i = 0; i < 2048; i++) { - mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; - mac_bridge.index = i; - - err = gswip_pce_table_entry_read(priv, &mac_bridge); - if (err) { - dev_err(priv->dev, "failed to read mac bridge: %d\n", - err); - return; - } - - if (!mac_bridge.valid) - continue; - - if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) - continue; - - if (port != FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, - mac_bridge.val[0])) - continue; - - mac_bridge.valid = false; - err = gswip_pce_table_entry_write(priv, &mac_bridge); - if (err) { - dev_err(priv->dev, "failed to write mac bridge: %d\n", - err); - return; - } - } -} - -static void gswip_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) -{ - struct gswip_priv *priv = ds->priv; - u32 stp_state; - - switch (state) { - case BR_STATE_DISABLED: - regmap_clear_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), - GSWIP_SDMA_PCTRL_EN); - return; - case BR_STATE_BLOCKING: - case BR_STATE_LISTENING: - stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LISTEN; - break; - case BR_STATE_LEARNING: - stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LEARNING; - break; - case BR_STATE_FORWARDING: - stp_state = GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING; - break; - default: - dev_err(priv->dev, "invalid STP state: %d\n", state); - return; - } - - regmap_set_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), - GSWIP_SDMA_PCTRL_EN); - regmap_write_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), - GSWIP_PCE_PCTRL_0_PSTATE_MASK, - stp_state); -} - -static int gswip_port_fdb(struct dsa_switch *ds, int port, - struct net_device *bridge, const unsigned char *addr, - u16 vid, bool add) -{ - struct gswip_priv *priv = ds->priv; - struct gswip_pce_table_entry mac_bridge = {0,}; - unsigned int max_ports = priv->hw_info->max_ports; - int fid = -1; - int i; - int err; - - for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { - if (priv->vlans[i].bridge == bridge) { - fid = priv->vlans[i].fid; - break; - } - } - - if (fid == -1) { - dev_err(priv->dev, "no FID found for bridge %s\n", - bridge->name); - return -EINVAL; - } - - mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; - mac_bridge.key_mode = true; - mac_bridge.key[0] = addr[5] | (addr[4] << 8); - mac_bridge.key[1] = addr[3] | (addr[2] << 8); - mac_bridge.key[2] = addr[1] | (addr[0] << 8); - mac_bridge.key[3] = FIELD_PREP(GSWIP_TABLE_MAC_BRIDGE_KEY3_FID, fid); - mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */ - mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC; - mac_bridge.valid = add; - - err = gswip_pce_table_entry_write(priv, &mac_bridge); - if (err) - dev_err(priv->dev, "failed to write mac bridge: %d\n", err); - - return err; -} - -static int gswip_port_fdb_add(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid, - struct dsa_db db) -{ - if (db.type != DSA_DB_BRIDGE) - return -EOPNOTSUPP; - - return gswip_port_fdb(ds, port, db.bridge.dev, addr, vid, true); -} - -static int gswip_port_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid, - struct dsa_db db) -{ - if (db.type != DSA_DB_BRIDGE) - return -EOPNOTSUPP; - - return gswip_port_fdb(ds, port, db.bridge.dev, addr, vid, false); -} - -static int gswip_port_fdb_dump(struct dsa_switch *ds, int port, - dsa_fdb_dump_cb_t *cb, void *data) -{ - struct gswip_priv *priv = ds->priv; - struct gswip_pce_table_entry mac_bridge = {0,}; - unsigned char addr[ETH_ALEN]; - int i; - int err; - - for (i = 0; i < 2048; i++) { - mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; - mac_bridge.index = i; - - err = gswip_pce_table_entry_read(priv, &mac_bridge); - if (err) { - dev_err(priv->dev, - "failed to read mac bridge entry %d: %d\n", - i, err); - return err; - } - - if (!mac_bridge.valid) - continue; - - addr[5] = mac_bridge.key[0] & 0xff; - addr[4] = (mac_bridge.key[0] >> 8) & 0xff; - addr[3] = mac_bridge.key[1] & 0xff; - addr[2] = (mac_bridge.key[1] >> 8) & 0xff; - addr[1] = mac_bridge.key[2] & 0xff; - addr[0] = (mac_bridge.key[2] >> 8) & 0xff; - if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) { - if (mac_bridge.val[0] & BIT(port)) { - err = cb(addr, 0, true, data); - if (err) - return err; - } - } else { - if (port == FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, - mac_bridge.val[0])) { - err = cb(addr, 0, false, data); - if (err) - return err; - } - } - } - return 0; -} - -static int gswip_port_max_mtu(struct dsa_switch *ds, int port) -{ - /* Includes 8 bytes for special header. */ - return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; -} + * Copyright (C) 2025 Daniel Golle + * Copyright (C) 2017 - 2019 Hauke Mehrtens + * Copyright (C) 2012 John Crispin + * Copyright (C) 2010 Lantiq Deutschland + */ -static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) -{ - struct gswip_priv *priv = ds->priv; +#include "lantiq_gswip.h" +#include "lantiq_pce.h" - /* CPU port always has maximum mtu of user ports, so use it to set - * switch frame size, including 8 byte special header. - */ - if (dsa_is_cpu_port(ds, port)) { - new_mtu += 8; - regmap_write(priv->gswip, GSWIP_MAC_FLEN, - VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN); - } +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include - /* Enable MLEN for ports with non-standard MTUs, including the special - * header on the CPU port added above. - */ - if (new_mtu != ETH_DATA_LEN) - regmap_set_bits(priv->gswip, GSWIP_MAC_CTRL_2p(port), - GSWIP_MAC_CTRL_2_MLEN); - else - regmap_clear_bits(priv->gswip, GSWIP_MAC_CTRL_2p(port), - GSWIP_MAC_CTRL_2_MLEN); +#include - return 0; -} +struct xway_gphy_match_data { + char *fe_firmware_name; + char *ge_firmware_name; +}; static void gswip_xrx200_phylink_get_caps(struct dsa_switch *ds, int port, struct phylink_config *config) @@ -1291,327 +97,6 @@ static void gswip_xrx300_phylink_get_caps(struct dsa_switch *ds, int port, MAC_10 | MAC_100 | MAC_1000; } -static void gswip_phylink_get_caps(struct dsa_switch *ds, int port, - struct phylink_config *config) -{ - struct gswip_priv *priv = ds->priv; - - priv->hw_info->phylink_get_caps(ds, port, config); -} - -static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) -{ - u32 mdio_phy; - - if (link) - mdio_phy = GSWIP_MDIO_PHY_LINK_UP; - else - mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN; - - regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), - GSWIP_MDIO_PHY_LINK_MASK, mdio_phy); -} - -static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed, - phy_interface_t interface) -{ - u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0; - - switch (speed) { - case SPEED_10: - mdio_phy = GSWIP_MDIO_PHY_SPEED_M10; - - if (interface == PHY_INTERFACE_MODE_RMII) - mii_cfg = GSWIP_MII_CFG_RATE_M50; - else - mii_cfg = GSWIP_MII_CFG_RATE_M2P5; - - mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; - break; - - case SPEED_100: - mdio_phy = GSWIP_MDIO_PHY_SPEED_M100; - - if (interface == PHY_INTERFACE_MODE_RMII) - mii_cfg = GSWIP_MII_CFG_RATE_M50; - else - mii_cfg = GSWIP_MII_CFG_RATE_M25; - - mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; - break; - - case SPEED_1000: - mdio_phy = GSWIP_MDIO_PHY_SPEED_G1; - - mii_cfg = GSWIP_MII_CFG_RATE_M125; - - mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII; - break; - } - - regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), - GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy); - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port); - regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), - GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0); -} - -static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex) -{ - u32 mac_ctrl_0, mdio_phy; - - if (duplex == DUPLEX_FULL) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN; - mdio_phy = GSWIP_MDIO_PHY_FDUP_EN; - } else { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS; - mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS; - } - - regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), - GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0); - regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), - GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy); -} - -static void gswip_port_set_pause(struct gswip_priv *priv, int port, - bool tx_pause, bool rx_pause) -{ - u32 mac_ctrl_0, mdio_phy; - - if (tx_pause && rx_pause) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | - GSWIP_MDIO_PHY_FCONRX_EN; - } else if (tx_pause) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | - GSWIP_MDIO_PHY_FCONRX_DIS; - } else if (rx_pause) { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | - GSWIP_MDIO_PHY_FCONRX_EN; - } else { - mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE; - mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | - GSWIP_MDIO_PHY_FCONRX_DIS; - } - - regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), - GSWIP_MAC_CTRL_0_FCON_MASK, mac_ctrl_0); - regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), - GSWIP_MDIO_PHY_FCONTX_MASK | GSWIP_MDIO_PHY_FCONRX_MASK, - mdio_phy); -} - -static void gswip_phylink_mac_config(struct phylink_config *config, - unsigned int mode, - const struct phylink_link_state *state) -{ - struct dsa_port *dp = dsa_phylink_to_port(config); - struct gswip_priv *priv = dp->ds->priv; - int port = dp->index; - u32 miicfg = 0; - - miicfg |= GSWIP_MII_CFG_LDCLKDIS; - - switch (state->interface) { - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_1000BASEX: - case PHY_INTERFACE_MODE_2500BASEX: - return; - case PHY_INTERFACE_MODE_MII: - case PHY_INTERFACE_MODE_INTERNAL: - miicfg |= GSWIP_MII_CFG_MODE_MIIM; - break; - case PHY_INTERFACE_MODE_REVMII: - miicfg |= GSWIP_MII_CFG_MODE_MIIP; - break; - case PHY_INTERFACE_MODE_RMII: - miicfg |= GSWIP_MII_CFG_MODE_RMIIM; - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_TXID: - miicfg |= GSWIP_MII_CFG_MODE_RGMII; - break; - case PHY_INTERFACE_MODE_GMII: - miicfg |= GSWIP_MII_CFG_MODE_GMII; - break; - default: - dev_err(dp->ds->dev, - "Unsupported interface: %d\n", state->interface); - return; - } - - gswip_mii_mask_cfg(priv, - GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK | - GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS, - miicfg, port); - - switch (state->interface) { - case PHY_INTERFACE_MODE_RGMII_ID: - gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK | - GSWIP_MII_PCDU_RXDLY_MASK, 0, port); - break; - case PHY_INTERFACE_MODE_RGMII_RXID: - gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_RXDLY_MASK, 0, port); - break; - case PHY_INTERFACE_MODE_RGMII_TXID: - gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK, 0, port); - break; - default: - break; - } -} - -static void gswip_phylink_mac_link_down(struct phylink_config *config, - unsigned int mode, - phy_interface_t interface) -{ - struct dsa_port *dp = dsa_phylink_to_port(config); - struct gswip_priv *priv = dp->ds->priv; - int port = dp->index; - - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port); - - if (!dsa_port_is_cpu(dp)) - gswip_port_set_link(priv, port, false); -} - -static void gswip_phylink_mac_link_up(struct phylink_config *config, - struct phy_device *phydev, - unsigned int mode, - phy_interface_t interface, - int speed, int duplex, - bool tx_pause, bool rx_pause) -{ - struct dsa_port *dp = dsa_phylink_to_port(config); - struct gswip_priv *priv = dp->ds->priv; - int port = dp->index; - - if (!dsa_port_is_cpu(dp)) { - gswip_port_set_link(priv, port, true); - gswip_port_set_speed(priv, port, speed, interface); - gswip_port_set_duplex(priv, port, duplex); - gswip_port_set_pause(priv, port, tx_pause, rx_pause); - } - - gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, GSWIP_MII_CFG_EN, port); -} - -static void gswip_get_strings(struct dsa_switch *ds, int port, u32 stringset, - uint8_t *data) -{ - int i; - - if (stringset != ETH_SS_STATS) - return; - - for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) - ethtool_puts(&data, gswip_rmon_cnt[i].name); -} - -static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table, - u32 index) -{ - u32 result, val; - int err; - - regmap_write(priv->gswip, GSWIP_BM_RAM_ADDR, index); - regmap_write_bits(priv->gswip, GSWIP_BM_RAM_CTRL, - GSWIP_BM_RAM_CTRL_ADDR_MASK | GSWIP_BM_RAM_CTRL_OPMOD | - GSWIP_BM_RAM_CTRL_BAS, - table | GSWIP_BM_RAM_CTRL_BAS); - - err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL, - GSWIP_BM_RAM_CTRL_BAS); - if (err) { - dev_err(priv->dev, "timeout while reading table: %u, index: %u\n", - table, index); - return 0; - } - - regmap_read(priv->gswip, GSWIP_BM_RAM_VAL(0), &result); - regmap_read(priv->gswip, GSWIP_BM_RAM_VAL(1), &val); - result |= val << 16; - - return result; -} - -static void gswip_get_ethtool_stats(struct dsa_switch *ds, int port, - uint64_t *data) -{ - struct gswip_priv *priv = ds->priv; - const struct gswip_rmon_cnt_desc *rmon_cnt; - int i; - u64 high; - - for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) { - rmon_cnt = &gswip_rmon_cnt[i]; - - data[i] = gswip_bcm_ram_entry_read(priv, port, - rmon_cnt->offset); - if (rmon_cnt->size == 2) { - high = gswip_bcm_ram_entry_read(priv, port, - rmon_cnt->offset + 1); - data[i] |= high << 32; - } - } -} - -static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset) -{ - if (sset != ETH_SS_STATS) - return 0; - - return ARRAY_SIZE(gswip_rmon_cnt); -} - -static struct phylink_pcs *gswip_phylink_mac_select_pcs(struct phylink_config *config, - phy_interface_t interface) -{ - struct dsa_port *dp = dsa_phylink_to_port(config); - struct gswip_priv *priv = dp->ds->priv; - - if (priv->hw_info->mac_select_pcs) - return priv->hw_info->mac_select_pcs(config, interface); - - return NULL; -} - -static const struct phylink_mac_ops gswip_phylink_mac_ops = { - .mac_config = gswip_phylink_mac_config, - .mac_link_down = gswip_phylink_mac_link_down, - .mac_link_up = gswip_phylink_mac_link_up, - .mac_select_pcs = gswip_phylink_mac_select_pcs, -}; - -static const struct dsa_switch_ops gswip_switch_ops = { - .get_tag_protocol = gswip_get_tag_protocol, - .setup = gswip_setup, - .port_setup = gswip_port_setup, - .port_enable = gswip_port_enable, - .port_disable = gswip_port_disable, - .port_bridge_join = gswip_port_bridge_join, - .port_bridge_leave = gswip_port_bridge_leave, - .port_fast_age = gswip_port_fast_age, - .port_vlan_filtering = gswip_port_vlan_filtering, - .port_vlan_add = gswip_port_vlan_add, - .port_vlan_del = gswip_port_vlan_del, - .port_stp_state_set = gswip_port_stp_state_set, - .port_fdb_add = gswip_port_fdb_add, - .port_fdb_del = gswip_port_fdb_del, - .port_fdb_dump = gswip_port_fdb_dump, - .port_change_mtu = gswip_port_change_mtu, - .port_max_mtu = gswip_port_max_mtu, - .phylink_get_caps = gswip_phylink_get_caps, - .get_strings = gswip_get_strings, - .get_ethtool_stats = gswip_get_ethtool_stats, - .get_sset_count = gswip_get_sset_count, -}; - static const struct xway_gphy_match_data xrx200a1x_gphy_data = { .fe_firmware_name = "lantiq/xrx200_phy22f_a14.bin", .ge_firmware_name = "lantiq/xrx200_phy11g_a14.bin", @@ -1832,30 +317,6 @@ static int gswip_gphy_fw_list(struct gswip_priv *priv, return err; } -static int gswip_validate_cpu_port(struct dsa_switch *ds) -{ - struct gswip_priv *priv = ds->priv; - struct dsa_port *cpu_dp; - int cpu_port = -1; - - dsa_switch_for_each_cpu_port(cpu_dp, ds) { - if (cpu_port != -1) - return dev_err_probe(ds->dev, -EINVAL, - "only a single CPU port is supported\n"); - - cpu_port = cpu_dp->index; - } - - if (cpu_port == -1) - return dev_err_probe(ds->dev, -EINVAL, "no CPU port defined\n"); - - if (BIT(cpu_port) & ~priv->hw_info->allowed_cpu_ports) - return dev_err_probe(ds->dev, -EINVAL, - "unsupported CPU port defined\n"); - - return 0; -} - static const struct regmap_config sw_regmap_config = { .name = "switch", .reg_bits = 32, @@ -1929,24 +390,9 @@ static int gswip_probe(struct platform_device *pdev) if (!priv->ds) return -ENOMEM; - priv->ds->dev = dev; - priv->ds->num_ports = priv->hw_info->max_ports; - priv->ds->priv = priv; - priv->ds->ops = &gswip_switch_ops; - priv->ds->phylink_mac_ops = &gswip_phylink_mac_ops; priv->dev = dev; - mutex_init(&priv->pce_table_lock); - regmap_read(priv->gswip, GSWIP_VERSION, &version); - /* The hardware has the 'major/minor' version bytes in the wrong order - * preventing numerical comparisons. Construct a 16-bit unsigned integer - * having the REV field as most significant byte and the MOD field as - * least significant byte. This is effectively swapping the two bytes of - * the version variable, but other than using swab16 it doesn't affect - * the source variable. - */ - priv->version = GSWIP_VERSION_REV(version) << 8 | - GSWIP_VERSION_MOD(version); + regmap_read(priv->gswip, GSWIP_VERSION, &version); np = dev->of_node; switch (version) { @@ -1976,25 +422,14 @@ static int gswip_probe(struct platform_device *pdev) "gphy fw probe failed\n"); } - err = dsa_register_switch(priv->ds); - if (err) { - dev_err_probe(dev, err, "dsa switch registration failed\n"); - goto gphy_fw_remove; - } - - err = gswip_validate_cpu_port(priv->ds); + err = gswip_probe_common(priv, version); if (err) - goto disable_switch; + goto gphy_fw_remove; platform_set_drvdata(pdev, priv); - dev_info(dev, "probed GSWIP version %lx mod %lx\n", - GSWIP_VERSION_REV(version), GSWIP_VERSION_MOD(version)); return 0; -disable_switch: - regmap_clear_bits(priv->mdio, GSWIP_MDIO_GLOB, GSWIP_MDIO_GLOB_ENABLE); - dsa_unregister_switch(priv->ds); gphy_fw_remove: for (i = 0; i < priv->num_gphy_fw; i++) gswip_gphy_fw_remove(priv, &priv->gphy_fw[i]); @@ -2010,7 +445,7 @@ static void gswip_remove(struct platform_device *pdev) return; /* disable the switch */ - regmap_clear_bits(priv->mdio, GSWIP_MDIO_GLOB, GSWIP_MDIO_GLOB_ENABLE); + gswip_disable_switch(priv); dsa_unregister_switch(priv->ds); diff --git a/drivers/net/dsa/lantiq/lantiq_gswip.h b/drivers/net/dsa/lantiq/lantiq_gswip.h index 24d759e06e15..d86290db19b4 100644 --- a/drivers/net/dsa/lantiq/lantiq_gswip.h +++ b/drivers/net/dsa/lantiq/lantiq_gswip.h @@ -278,4 +278,8 @@ struct gswip_priv { u16 version; }; +void gswip_disable_switch(struct gswip_priv *priv); + +int gswip_probe_common(struct gswip_priv *priv, u32 version); + #endif /* __LANTIQ_GSWIP_H */ diff --git a/drivers/net/dsa/lantiq/lantiq_gswip_common.c b/drivers/net/dsa/lantiq/lantiq_gswip_common.c new file mode 100644 index 000000000000..a0e361622acb --- /dev/null +++ b/drivers/net/dsa/lantiq/lantiq_gswip_common.c @@ -0,0 +1,1622 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Lantiq / Intel / MaxLinear GSWIP common function library + * + * Copyright (C) 2025 Daniel Golle + * Copyright (C) 2023 - 2024 MaxLinear Inc. + * Copyright (C) 2022 Snap One, LLC. All rights reserved. + * Copyright (C) 2017 - 2019 Hauke Mehrtens + * Copyright (C) 2012 John Crispin + * Copyright (C) 2010 Lantiq Deutschland + * + * The VLAN and bridge model the GSWIP hardware uses does not directly + * matches the model DSA uses. + * + * The hardware has 64 possible table entries for bridges with one VLAN + * ID, one flow id and a list of ports for each bridge. All entries which + * match the same flow ID are combined in the mac learning table, they + * act as one global bridge. + * The hardware does not support VLAN filter on the port, but on the + * bridge, this driver converts the DSA model to the hardware. + * + * The CPU gets all the exception frames which do not match any forwarding + * rule and the CPU port is also added to all bridges. This makes it possible + * to handle all the special cases easily in software. + * At the initialization the driver allocates one bridge table entry for + * each switch port which is used when the port is used without an + * explicit bridge. This prevents the frames from being forwarded + * between all LAN ports by default. + */ + +#include "lantiq_gswip.h" + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct gswip_pce_table_entry { + u16 index; // PCE_TBL_ADDR.ADDR = pData->table_index + u16 table; // PCE_TBL_CTRL.ADDR = pData->table + u16 key[8]; + u16 val[5]; + u16 mask; + u8 gmap; + bool type; + bool valid; + bool key_mode; +}; + +struct gswip_rmon_cnt_desc { + unsigned int size; + unsigned int offset; + const char *name; +}; + +#define MIB_DESC(_size, _offset, _name) {.size = _size, .offset = _offset, .name = _name} + +static const struct gswip_rmon_cnt_desc gswip_rmon_cnt[] = { + /** Receive Packet Count (only packets that are accepted and not discarded). */ + MIB_DESC(1, 0x1F, "RxGoodPkts"), + MIB_DESC(1, 0x23, "RxUnicastPkts"), + MIB_DESC(1, 0x22, "RxMulticastPkts"), + MIB_DESC(1, 0x21, "RxFCSErrorPkts"), + MIB_DESC(1, 0x1D, "RxUnderSizeGoodPkts"), + MIB_DESC(1, 0x1E, "RxUnderSizeErrorPkts"), + MIB_DESC(1, 0x1B, "RxOversizeGoodPkts"), + MIB_DESC(1, 0x1C, "RxOversizeErrorPkts"), + MIB_DESC(1, 0x20, "RxGoodPausePkts"), + MIB_DESC(1, 0x1A, "RxAlignErrorPkts"), + MIB_DESC(1, 0x12, "Rx64BytePkts"), + MIB_DESC(1, 0x13, "Rx127BytePkts"), + MIB_DESC(1, 0x14, "Rx255BytePkts"), + MIB_DESC(1, 0x15, "Rx511BytePkts"), + MIB_DESC(1, 0x16, "Rx1023BytePkts"), + /** Receive Size 1024-1522 (or more, if configured) Packet Count. */ + MIB_DESC(1, 0x17, "RxMaxBytePkts"), + MIB_DESC(1, 0x18, "RxDroppedPkts"), + MIB_DESC(1, 0x19, "RxFilteredPkts"), + MIB_DESC(2, 0x24, "RxGoodBytes"), + MIB_DESC(2, 0x26, "RxBadBytes"), + MIB_DESC(1, 0x11, "TxAcmDroppedPkts"), + MIB_DESC(1, 0x0C, "TxGoodPkts"), + MIB_DESC(1, 0x06, "TxUnicastPkts"), + MIB_DESC(1, 0x07, "TxMulticastPkts"), + MIB_DESC(1, 0x00, "Tx64BytePkts"), + MIB_DESC(1, 0x01, "Tx127BytePkts"), + MIB_DESC(1, 0x02, "Tx255BytePkts"), + MIB_DESC(1, 0x03, "Tx511BytePkts"), + MIB_DESC(1, 0x04, "Tx1023BytePkts"), + /** Transmit Size 1024-1522 (or more, if configured) Packet Count. */ + MIB_DESC(1, 0x05, "TxMaxBytePkts"), + MIB_DESC(1, 0x08, "TxSingleCollCount"), + MIB_DESC(1, 0x09, "TxMultCollCount"), + MIB_DESC(1, 0x0A, "TxLateCollCount"), + MIB_DESC(1, 0x0B, "TxExcessCollCount"), + MIB_DESC(1, 0x0D, "TxPauseCount"), + MIB_DESC(1, 0x10, "TxDroppedPkts"), + MIB_DESC(2, 0x0E, "TxGoodBytes"), +}; + +static u32 gswip_switch_r_timeout(struct gswip_priv *priv, u32 offset, + u32 cleared) +{ + u32 val; + + return regmap_read_poll_timeout(priv->gswip, offset, val, + !(val & cleared), 20, 50000); +} + +static void gswip_mii_mask_cfg(struct gswip_priv *priv, u32 mask, u32 set, + int port) +{ + int reg_port; + + /* MII_CFG register only exists for MII ports */ + if (!(priv->hw_info->mii_ports & BIT(port))) + return; + + reg_port = port + priv->hw_info->mii_port_reg_offset; + + regmap_write_bits(priv->mii, GSWIP_MII_CFGp(reg_port), mask, + set); +} + +static void gswip_mii_mask_pcdu(struct gswip_priv *priv, u32 mask, u32 set, + int port) +{ + int reg_port; + + /* MII_PCDU register only exists for MII ports */ + if (!(priv->hw_info->mii_ports & BIT(port))) + return; + + reg_port = port + priv->hw_info->mii_port_reg_offset; + + switch (reg_port) { + case 0: + regmap_write_bits(priv->mii, GSWIP_MII_PCDU0, mask, set); + break; + case 1: + regmap_write_bits(priv->mii, GSWIP_MII_PCDU1, mask, set); + break; + case 5: + regmap_write_bits(priv->mii, GSWIP_MII_PCDU5, mask, set); + break; + } +} + +static int gswip_mdio_poll(struct gswip_priv *priv) +{ + u32 ctrl; + + return regmap_read_poll_timeout(priv->mdio, GSWIP_MDIO_CTRL, ctrl, + !(ctrl & GSWIP_MDIO_CTRL_BUSY), 40, 4000); +} + +static int gswip_mdio_wr(struct mii_bus *bus, int addr, int reg, u16 val) +{ + struct gswip_priv *priv = bus->priv; + int err; + + err = gswip_mdio_poll(priv); + if (err) { + dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); + return err; + } + + regmap_write(priv->mdio, GSWIP_MDIO_WRITE, val); + regmap_write(priv->mdio, GSWIP_MDIO_CTRL, + GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_WR | + ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | + (reg & GSWIP_MDIO_CTRL_REGAD_MASK)); + + return 0; +} + +static int gswip_mdio_rd(struct mii_bus *bus, int addr, int reg) +{ + struct gswip_priv *priv = bus->priv; + u32 val; + int err; + + err = gswip_mdio_poll(priv); + if (err) { + dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); + return err; + } + + regmap_write(priv->mdio, GSWIP_MDIO_CTRL, + GSWIP_MDIO_CTRL_BUSY | GSWIP_MDIO_CTRL_RD | + ((addr & GSWIP_MDIO_CTRL_PHYAD_MASK) << GSWIP_MDIO_CTRL_PHYAD_SHIFT) | + (reg & GSWIP_MDIO_CTRL_REGAD_MASK)); + + err = gswip_mdio_poll(priv); + if (err) { + dev_err(&bus->dev, "waiting for MDIO bus busy timed out\n"); + return err; + } + + err = regmap_read(priv->mdio, GSWIP_MDIO_READ, &val); + if (err) + return err; + + return val; +} + +static int gswip_mdio(struct gswip_priv *priv) +{ + struct device_node *mdio_np, *switch_np = priv->dev->of_node; + struct device *dev = priv->dev; + struct mii_bus *bus; + int err = 0; + + mdio_np = of_get_compatible_child(switch_np, "lantiq,xrx200-mdio"); + if (!mdio_np) + mdio_np = of_get_child_by_name(switch_np, "mdio"); + + if (!of_device_is_available(mdio_np)) + goto out_put_node; + + bus = devm_mdiobus_alloc(dev); + if (!bus) { + err = -ENOMEM; + goto out_put_node; + } + + bus->priv = priv; + bus->read = gswip_mdio_rd; + bus->write = gswip_mdio_wr; + bus->name = "lantiq,xrx200-mdio"; + snprintf(bus->id, MII_BUS_ID_SIZE, "%s-mii", dev_name(priv->dev)); + bus->parent = priv->dev; + + err = devm_of_mdiobus_register(dev, bus, mdio_np); + +out_put_node: + of_node_put(mdio_np); + + return err; +} + +static int gswip_pce_table_entry_read(struct gswip_priv *priv, + struct gswip_pce_table_entry *tbl) +{ + int i; + int err; + u32 crtl; + u32 tmp; + u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSRD : + GSWIP_PCE_TBL_CTRL_OPMOD_ADRD; + + mutex_lock(&priv->pce_table_lock); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) + goto out_unlock; + + regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, tbl->index); + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK | + GSWIP_PCE_TBL_CTRL_BAS, + tbl->table | addr_mode | GSWIP_PCE_TBL_CTRL_BAS); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) + goto out_unlock; + + for (i = 0; i < ARRAY_SIZE(tbl->key); i++) { + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_KEY(i), &tmp); + if (err) + goto out_unlock; + tbl->key[i] = tmp; + } + for (i = 0; i < ARRAY_SIZE(tbl->val); i++) { + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_VAL(i), &tmp); + if (err) + goto out_unlock; + tbl->val[i] = tmp; + } + + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_MASK, &tmp); + if (err) + goto out_unlock; + + tbl->mask = tmp; + err = regmap_read(priv->gswip, GSWIP_PCE_TBL_CTRL, &crtl); + if (err) + goto out_unlock; + + tbl->type = !!(crtl & GSWIP_PCE_TBL_CTRL_TYPE); + tbl->valid = !!(crtl & GSWIP_PCE_TBL_CTRL_VLD); + tbl->gmap = (crtl & GSWIP_PCE_TBL_CTRL_GMAP_MASK) >> 7; + +out_unlock: + mutex_unlock(&priv->pce_table_lock); + + return err; +} + +static int gswip_pce_table_entry_write(struct gswip_priv *priv, + struct gswip_pce_table_entry *tbl) +{ + int i; + int err; + u32 crtl; + u16 addr_mode = tbl->key_mode ? GSWIP_PCE_TBL_CTRL_OPMOD_KSWR : + GSWIP_PCE_TBL_CTRL_OPMOD_ADWR; + + mutex_lock(&priv->pce_table_lock); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) { + mutex_unlock(&priv->pce_table_lock); + return err; + } + + regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, tbl->index); + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK, + tbl->table | addr_mode); + + for (i = 0; i < ARRAY_SIZE(tbl->key); i++) + regmap_write(priv->gswip, GSWIP_PCE_TBL_KEY(i), tbl->key[i]); + + for (i = 0; i < ARRAY_SIZE(tbl->val); i++) + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(i), tbl->val[i]); + + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK, + tbl->table | addr_mode); + + regmap_write(priv->gswip, GSWIP_PCE_TBL_MASK, tbl->mask); + + regmap_read(priv->gswip, GSWIP_PCE_TBL_CTRL, &crtl); + crtl &= ~(GSWIP_PCE_TBL_CTRL_TYPE | GSWIP_PCE_TBL_CTRL_VLD | + GSWIP_PCE_TBL_CTRL_GMAP_MASK); + if (tbl->type) + crtl |= GSWIP_PCE_TBL_CTRL_TYPE; + if (tbl->valid) + crtl |= GSWIP_PCE_TBL_CTRL_VLD; + crtl |= (tbl->gmap << 7) & GSWIP_PCE_TBL_CTRL_GMAP_MASK; + crtl |= GSWIP_PCE_TBL_CTRL_BAS; + regmap_write(priv->gswip, GSWIP_PCE_TBL_CTRL, crtl); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + + mutex_unlock(&priv->pce_table_lock); + + return err; +} + +/* Add the LAN port into a bridge with the CPU port by + * default. This prevents automatic forwarding of + * packages between the LAN ports when no explicit + * bridge is configured. + */ +static int gswip_add_single_port_br(struct gswip_priv *priv, int port, bool add) +{ + struct gswip_pce_table_entry vlan_active = {0,}; + struct gswip_pce_table_entry vlan_mapping = {0,}; + int err; + + vlan_active.index = port + 1; + vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; + vlan_active.key[0] = GSWIP_VLAN_UNAWARE_PVID; + vlan_active.val[0] = port + 1 /* fid */; + vlan_active.valid = add; + err = gswip_pce_table_entry_write(priv, &vlan_active); + if (err) { + dev_err(priv->dev, "failed to write active VLAN: %d\n", err); + return err; + } + + if (!add) + return 0; + + vlan_mapping.index = port + 1; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + vlan_mapping.val[0] = GSWIP_VLAN_UNAWARE_PVID; + vlan_mapping.val[1] = BIT(port) | dsa_cpu_ports(priv->ds); + vlan_mapping.val[2] = 0; + err = gswip_pce_table_entry_write(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); + return err; + } + + return 0; +} + +static int gswip_port_setup(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + int err; + + if (!dsa_is_cpu_port(ds, port)) { + err = gswip_add_single_port_br(priv, port, true); + if (err) + return err; + } + + return 0; +} + +static int gswip_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phydev) +{ + struct gswip_priv *priv = ds->priv; + + if (!dsa_is_cpu_port(ds, port)) { + u32 mdio_phy = 0; + + if (phydev) + mdio_phy = phydev->mdio.addr & GSWIP_MDIO_PHY_ADDR_MASK; + + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_ADDR_MASK, + mdio_phy); + } + + /* RMON Counter Enable for port */ + regmap_write(priv->gswip, GSWIP_BM_PCFGp(port), GSWIP_BM_PCFG_CNTEN); + + /* enable port fetch/store dma & VLAN Modification */ + regmap_set_bits(priv->gswip, GSWIP_FDMA_PCTRLp(port), + GSWIP_FDMA_PCTRL_EN | GSWIP_FDMA_PCTRL_VLANMOD_BOTH); + regmap_set_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); + + return 0; +} + +static void gswip_port_disable(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + + regmap_clear_bits(priv->gswip, GSWIP_FDMA_PCTRLp(port), + GSWIP_FDMA_PCTRL_EN); + regmap_clear_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); +} + +static int gswip_pce_load_microcode(struct gswip_priv *priv) +{ + int i; + int err; + + regmap_write_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_ADDR_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_MASK | + GSWIP_PCE_TBL_CTRL_OPMOD_ADWR, + GSWIP_PCE_TBL_CTRL_OPMOD_ADWR); + regmap_write(priv->gswip, GSWIP_PCE_TBL_MASK, 0); + + for (i = 0; i < priv->hw_info->pce_microcode_size; i++) { + regmap_write(priv->gswip, GSWIP_PCE_TBL_ADDR, i); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(0), + (*priv->hw_info->pce_microcode)[i].val_0); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(1), + (*priv->hw_info->pce_microcode)[i].val_1); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(2), + (*priv->hw_info->pce_microcode)[i].val_2); + regmap_write(priv->gswip, GSWIP_PCE_TBL_VAL(3), + (*priv->hw_info->pce_microcode)[i].val_3); + + /* start the table access: */ + regmap_set_bits(priv->gswip, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + err = gswip_switch_r_timeout(priv, GSWIP_PCE_TBL_CTRL, + GSWIP_PCE_TBL_CTRL_BAS); + if (err) + return err; + } + + /* tell the switch that the microcode is loaded */ + regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_MC_VALID); + + return 0; +} + +static void gswip_port_commit_pvid(struct gswip_priv *priv, int port) +{ + struct dsa_port *dp = dsa_to_port(priv->ds, port); + struct net_device *br = dsa_port_bridge_dev_get(dp); + u32 vinr; + int idx; + + if (!dsa_port_is_user(dp)) + return; + + if (br) { + u16 pvid = GSWIP_VLAN_UNAWARE_PVID; + + if (br_vlan_enabled(br)) + br_vlan_get_pvid(br, &pvid); + + /* VLAN-aware bridge ports with no PVID will use Active VLAN + * index 0. The expectation is that this drops all untagged and + * VID-0 tagged ingress traffic. + */ + idx = 0; + for (int i = priv->hw_info->max_ports; + i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == br && + priv->vlans[i].vid == pvid) { + idx = i; + break; + } + } + } else { + /* The Active VLAN table index as configured by + * gswip_add_single_port_br() + */ + idx = port + 1; + } + + vinr = idx ? GSWIP_PCE_VCTRL_VINR_ALL : GSWIP_PCE_VCTRL_VINR_TAGGED; + regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), + GSWIP_PCE_VCTRL_VINR, + FIELD_PREP(GSWIP_PCE_VCTRL_VINR, vinr)); + + /* Note that in GSWIP 2.2 VLAN mode the VID needs to be programmed + * directly instead of referencing the index in the Active VLAN Tablet. + * However, without the VLANMD bit (9) in PCE_GCTRL_1 (0x457) even + * GSWIP 2.2 and newer hardware maintain the GSWIP 2.1 behavior. + */ + regmap_write(priv->gswip, GSWIP_PCE_DEFPVID(port), idx); +} + +static int gswip_port_vlan_filtering(struct dsa_switch *ds, int port, + bool vlan_filtering, + struct netlink_ext_ack *extack) +{ + struct gswip_priv *priv = ds->priv; + + if (vlan_filtering) { + /* Use tag based VLAN */ + regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), + GSWIP_PCE_VCTRL_VSR | + GSWIP_PCE_VCTRL_UVR | + GSWIP_PCE_VCTRL_VIMR | + GSWIP_PCE_VCTRL_VEMR | + GSWIP_PCE_VCTRL_VID0, + GSWIP_PCE_VCTRL_UVR | + GSWIP_PCE_VCTRL_VIMR | + GSWIP_PCE_VCTRL_VEMR | + GSWIP_PCE_VCTRL_VID0); + regmap_clear_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), + GSWIP_PCE_PCTRL_0_TVM); + } else { + /* Use port based VLAN */ + regmap_write_bits(priv->gswip, GSWIP_PCE_VCTRL(port), + GSWIP_PCE_VCTRL_UVR | + GSWIP_PCE_VCTRL_VIMR | + GSWIP_PCE_VCTRL_VEMR | + GSWIP_PCE_VCTRL_VID0 | + GSWIP_PCE_VCTRL_VSR, + GSWIP_PCE_VCTRL_VSR); + regmap_set_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), + GSWIP_PCE_PCTRL_0_TVM); + } + + gswip_port_commit_pvid(priv, port); + + return 0; +} + +static int gswip_setup(struct dsa_switch *ds) +{ + unsigned int cpu_ports = dsa_cpu_ports(ds); + struct gswip_priv *priv = ds->priv; + struct dsa_port *cpu_dp; + int err, i; + + regmap_write(priv->gswip, GSWIP_SWRES, GSWIP_SWRES_R0); + usleep_range(5000, 10000); + regmap_write(priv->gswip, GSWIP_SWRES, 0); + + /* disable port fetch/store dma on all ports */ + for (i = 0; i < priv->hw_info->max_ports; i++) { + gswip_port_disable(ds, i); + gswip_port_vlan_filtering(ds, i, false, NULL); + } + + /* enable Switch */ + regmap_set_bits(priv->mdio, GSWIP_MDIO_GLOB, GSWIP_MDIO_GLOB_ENABLE); + + err = gswip_pce_load_microcode(priv); + if (err) { + dev_err(priv->dev, "writing PCE microcode failed, %i\n", err); + return err; + } + + /* Default unknown Broadcast/Multicast/Unicast port maps */ + regmap_write(priv->gswip, GSWIP_PCE_PMAP1, cpu_ports); + regmap_write(priv->gswip, GSWIP_PCE_PMAP2, cpu_ports); + regmap_write(priv->gswip, GSWIP_PCE_PMAP3, cpu_ports); + + /* Deactivate MDIO PHY auto polling. Some PHYs as the AR8030 have an + * interoperability problem with this auto polling mechanism because + * their status registers think that the link is in a different state + * than it actually is. For the AR8030 it has the BMSR_ESTATEN bit set + * as well as ESTATUS_1000_TFULL and ESTATUS_1000_XFULL. This makes the + * auto polling state machine consider the link being negotiated with + * 1Gbit/s. Since the PHY itself is a Fast Ethernet RMII PHY this leads + * to the switch port being completely dead (RX and TX are both not + * working). + * Also with various other PHY / port combinations (PHY11G GPHY, PHY22F + * GPHY, external RGMII PEF7071/7072) any traffic would stop. Sometimes + * it would work fine for a few minutes to hours and then stop, on + * other device it would no traffic could be sent or received at all. + * Testing shows that when PHY auto polling is disabled these problems + * go away. + */ + regmap_write(priv->mdio, GSWIP_MDIO_MDC_CFG0, 0x0); + + /* Configure the MDIO Clock 2.5 MHz */ + regmap_write_bits(priv->mdio, GSWIP_MDIO_MDC_CFG1, 0xff, 0x09); + + /* bring up the mdio bus */ + err = gswip_mdio(priv); + if (err) { + dev_err(priv->dev, "mdio bus setup failed\n"); + return err; + } + + /* Disable the xMII interface and clear it's isolation bit */ + for (i = 0; i < priv->hw_info->max_ports; i++) + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_EN | GSWIP_MII_CFG_ISOLATE, + 0, i); + + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + /* enable special tag insertion on cpu port */ + regmap_set_bits(priv->gswip, GSWIP_FDMA_PCTRLp(cpu_dp->index), + GSWIP_FDMA_PCTRL_STEN); + + /* accept special tag in ingress direction */ + regmap_set_bits(priv->gswip, + GSWIP_PCE_PCTRL_0p(cpu_dp->index), + GSWIP_PCE_PCTRL_0_INGRESS); + } + + regmap_set_bits(priv->gswip, GSWIP_BM_QUEUE_GCTRL, + GSWIP_BM_QUEUE_GCTRL_GL_MOD); + + /* VLAN aware Switching */ + regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_VLAN); + + /* Flush MAC Table */ + regmap_set_bits(priv->gswip, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_MTFL); + + err = gswip_switch_r_timeout(priv, GSWIP_PCE_GCTRL_0, + GSWIP_PCE_GCTRL_0_MTFL); + if (err) { + dev_err(priv->dev, "MAC flushing didn't finish\n"); + return err; + } + + ds->mtu_enforcement_ingress = true; + + return 0; +} + +static enum dsa_tag_protocol gswip_get_tag_protocol(struct dsa_switch *ds, + int port, + enum dsa_tag_protocol mp) +{ + struct gswip_priv *priv = ds->priv; + + return priv->hw_info->tag_protocol; +} + +static int gswip_vlan_active_create(struct gswip_priv *priv, + struct net_device *bridge, + int fid, u16 vid) +{ + struct gswip_pce_table_entry vlan_active = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + int idx = -1; + int err; + int i; + + /* Look for a free slot */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (!priv->vlans[i].bridge) { + idx = i; + break; + } + } + + if (idx == -1) + return -ENOSPC; + + if (fid == -1) + fid = idx; + + vlan_active.index = idx; + vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; + vlan_active.key[0] = vid; + vlan_active.val[0] = fid; + vlan_active.valid = true; + + err = gswip_pce_table_entry_write(priv, &vlan_active); + if (err) { + dev_err(priv->dev, "failed to write active VLAN: %d\n", err); + return err; + } + + priv->vlans[idx].bridge = bridge; + priv->vlans[idx].vid = vid; + priv->vlans[idx].fid = fid; + + return idx; +} + +static int gswip_vlan_active_remove(struct gswip_priv *priv, int idx) +{ + struct gswip_pce_table_entry vlan_active = {0,}; + int err; + + vlan_active.index = idx; + vlan_active.table = GSWIP_TABLE_ACTIVE_VLAN; + vlan_active.valid = false; + err = gswip_pce_table_entry_write(priv, &vlan_active); + if (err) + dev_err(priv->dev, "failed to delete active VLAN: %d\n", err); + priv->vlans[idx].bridge = NULL; + + return err; +} + +static int gswip_vlan_add(struct gswip_priv *priv, struct net_device *bridge, + int port, u16 vid, bool untagged, bool pvid, + bool vlan_aware) +{ + struct gswip_pce_table_entry vlan_mapping = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + unsigned int cpu_ports = dsa_cpu_ports(priv->ds); + bool active_vlan_created = false; + int fid = -1, idx = -1; + int i, err; + + /* Check if there is already a page for this bridge */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge) { + if (vlan_aware) { + if (fid != -1 && fid != priv->vlans[i].fid) + dev_err(priv->dev, "one bridge with multiple flow ids\n"); + fid = priv->vlans[i].fid; + } + if (priv->vlans[i].vid == vid) { + idx = i; + break; + } + } + } + + /* If this bridge is not programmed yet, add a Active VLAN table + * entry in a free slot and prepare the VLAN mapping table entry. + */ + if (idx == -1) { + idx = gswip_vlan_active_create(priv, bridge, fid, vid); + if (idx < 0) + return idx; + active_vlan_created = true; + + vlan_mapping.index = idx; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + } else { + /* Read the existing VLAN mapping entry from the switch */ + vlan_mapping.index = idx; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + err = gswip_pce_table_entry_read(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to read VLAN mapping: %d\n", + err); + return err; + } + } + + /* VLAN ID byte, maps to the VLAN ID of vlan active table */ + vlan_mapping.val[0] = vid; + /* Update the VLAN mapping entry and write it to the switch */ + vlan_mapping.val[1] |= cpu_ports; + vlan_mapping.val[1] |= BIT(port); + if (vlan_aware) + vlan_mapping.val[2] |= cpu_ports; + if (untagged) + vlan_mapping.val[2] &= ~BIT(port); + else + vlan_mapping.val[2] |= BIT(port); + err = gswip_pce_table_entry_write(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); + /* In case an Active VLAN was creaetd delete it again */ + if (active_vlan_created) + gswip_vlan_active_remove(priv, idx); + return err; + } + + gswip_port_commit_pvid(priv, port); + + return 0; +} + +static int gswip_vlan_remove(struct gswip_priv *priv, + struct net_device *bridge, int port, + u16 vid) +{ + struct gswip_pce_table_entry vlan_mapping = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + int idx = -1; + int i; + int err; + + /* Check if there is already a page for this bridge */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge && + priv->vlans[i].vid == vid) { + idx = i; + break; + } + } + + if (idx == -1) { + dev_err(priv->dev, "Port %d cannot find VID %u of bridge %s\n", + port, vid, bridge ? bridge->name : "(null)"); + return -ENOENT; + } + + vlan_mapping.index = idx; + vlan_mapping.table = GSWIP_TABLE_VLAN_MAPPING; + err = gswip_pce_table_entry_read(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to read VLAN mapping: %d\n", err); + return err; + } + + vlan_mapping.val[1] &= ~BIT(port); + vlan_mapping.val[2] &= ~BIT(port); + err = gswip_pce_table_entry_write(priv, &vlan_mapping); + if (err) { + dev_err(priv->dev, "failed to write VLAN mapping: %d\n", err); + return err; + } + + /* In case all ports are removed from the bridge, remove the VLAN */ + if (!(vlan_mapping.val[1] & ~dsa_cpu_ports(priv->ds))) { + err = gswip_vlan_active_remove(priv, idx); + if (err) { + dev_err(priv->dev, "failed to write active VLAN: %d\n", + err); + return err; + } + } + + gswip_port_commit_pvid(priv, port); + + return 0; +} + +static int gswip_port_bridge_join(struct dsa_switch *ds, int port, + struct dsa_bridge bridge, + bool *tx_fwd_offload, + struct netlink_ext_ack *extack) +{ + struct net_device *br = bridge.dev; + struct gswip_priv *priv = ds->priv; + int err; + + /* Set up the VLAN for VLAN-unaware bridging for this port, and remove + * it from the "single-port bridge" through which it was operating as + * standalone. + */ + err = gswip_vlan_add(priv, br, port, GSWIP_VLAN_UNAWARE_PVID, + true, true, false); + if (err) + return err; + + return gswip_add_single_port_br(priv, port, false); +} + +static void gswip_port_bridge_leave(struct dsa_switch *ds, int port, + struct dsa_bridge bridge) +{ + struct net_device *br = bridge.dev; + struct gswip_priv *priv = ds->priv; + + /* Add the port back to the "single-port bridge", and remove it from + * the VLAN-unaware PVID created for this bridge. + */ + gswip_add_single_port_br(priv, port, true); + gswip_vlan_remove(priv, br, port, GSWIP_VLAN_UNAWARE_PVID); +} + +static int gswip_port_vlan_prepare(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); + struct gswip_priv *priv = ds->priv; + unsigned int max_ports = priv->hw_info->max_ports; + int pos = max_ports; + int i, idx = -1; + + /* We only support VLAN filtering on bridges */ + if (!dsa_is_cpu_port(ds, port) && !bridge) + return -EOPNOTSUPP; + + /* Check if there is already a page for this VLAN */ + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge && + priv->vlans[i].vid == vlan->vid) { + idx = i; + break; + } + } + + /* If this VLAN is not programmed yet, we have to reserve + * one entry in the VLAN table. Make sure we start at the + * next position round. + */ + if (idx == -1) { + /* Look for a free slot */ + for (; pos < ARRAY_SIZE(priv->vlans); pos++) { + if (!priv->vlans[pos].bridge) { + idx = pos; + pos++; + break; + } + } + + if (idx == -1) { + NL_SET_ERR_MSG_MOD(extack, "No slot in VLAN table"); + return -ENOSPC; + } + } + + return 0; +} + +static int gswip_port_vlan_add(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan, + struct netlink_ext_ack *extack) +{ + struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); + struct gswip_priv *priv = ds->priv; + bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; + bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; + int err; + + if (vlan->vid == GSWIP_VLAN_UNAWARE_PVID) + return 0; + + err = gswip_port_vlan_prepare(ds, port, vlan, extack); + if (err) + return err; + + /* We have to receive all packets on the CPU port and should not + * do any VLAN filtering here. This is also called with bridge + * NULL and then we do not know for which bridge to configure + * this. + */ + if (dsa_is_cpu_port(ds, port)) + return 0; + + return gswip_vlan_add(priv, bridge, port, vlan->vid, untagged, pvid, + true); +} + +static int gswip_port_vlan_del(struct dsa_switch *ds, int port, + const struct switchdev_obj_port_vlan *vlan) +{ + struct net_device *bridge = dsa_port_bridge_dev_get(dsa_to_port(ds, port)); + struct gswip_priv *priv = ds->priv; + + if (vlan->vid == GSWIP_VLAN_UNAWARE_PVID) + return 0; + + /* We have to receive all packets on the CPU port and should not + * do any VLAN filtering here. This is also called with bridge + * NULL and then we do not know for which bridge to configure + * this. + */ + if (dsa_is_cpu_port(ds, port)) + return 0; + + return gswip_vlan_remove(priv, bridge, port, vlan->vid); +} + +static void gswip_port_fast_age(struct dsa_switch *ds, int port) +{ + struct gswip_priv *priv = ds->priv; + struct gswip_pce_table_entry mac_bridge = {0,}; + int i; + int err; + + for (i = 0; i < 2048; i++) { + mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; + mac_bridge.index = i; + + err = gswip_pce_table_entry_read(priv, &mac_bridge); + if (err) { + dev_err(priv->dev, "failed to read mac bridge: %d\n", + err); + return; + } + + if (!mac_bridge.valid) + continue; + + if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) + continue; + + if (port != FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, + mac_bridge.val[0])) + continue; + + mac_bridge.valid = false; + err = gswip_pce_table_entry_write(priv, &mac_bridge); + if (err) { + dev_err(priv->dev, "failed to write mac bridge: %d\n", + err); + return; + } + } +} + +static void gswip_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) +{ + struct gswip_priv *priv = ds->priv; + u32 stp_state; + + switch (state) { + case BR_STATE_DISABLED: + regmap_clear_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); + return; + case BR_STATE_BLOCKING: + case BR_STATE_LISTENING: + stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LISTEN; + break; + case BR_STATE_LEARNING: + stp_state = GSWIP_PCE_PCTRL_0_PSTATE_LEARNING; + break; + case BR_STATE_FORWARDING: + stp_state = GSWIP_PCE_PCTRL_0_PSTATE_FORWARDING; + break; + default: + dev_err(priv->dev, "invalid STP state: %d\n", state); + return; + } + + regmap_set_bits(priv->gswip, GSWIP_SDMA_PCTRLp(port), + GSWIP_SDMA_PCTRL_EN); + regmap_write_bits(priv->gswip, GSWIP_PCE_PCTRL_0p(port), + GSWIP_PCE_PCTRL_0_PSTATE_MASK, + stp_state); +} + +static int gswip_port_fdb(struct dsa_switch *ds, int port, + struct net_device *bridge, const unsigned char *addr, + u16 vid, bool add) +{ + struct gswip_priv *priv = ds->priv; + struct gswip_pce_table_entry mac_bridge = {0,}; + unsigned int max_ports = priv->hw_info->max_ports; + int fid = -1; + int i; + int err; + + for (i = max_ports; i < ARRAY_SIZE(priv->vlans); i++) { + if (priv->vlans[i].bridge == bridge) { + fid = priv->vlans[i].fid; + break; + } + } + + if (fid == -1) { + dev_err(priv->dev, "no FID found for bridge %s\n", + bridge->name); + return -EINVAL; + } + + mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; + mac_bridge.key_mode = true; + mac_bridge.key[0] = addr[5] | (addr[4] << 8); + mac_bridge.key[1] = addr[3] | (addr[2] << 8); + mac_bridge.key[2] = addr[1] | (addr[0] << 8); + mac_bridge.key[3] = FIELD_PREP(GSWIP_TABLE_MAC_BRIDGE_KEY3_FID, fid); + mac_bridge.val[0] = add ? BIT(port) : 0; /* port map */ + mac_bridge.val[1] = GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC; + mac_bridge.valid = add; + + err = gswip_pce_table_entry_write(priv, &mac_bridge); + if (err) + dev_err(priv->dev, "failed to write mac bridge: %d\n", err); + + return err; +} + +static int gswip_port_fdb_add(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + if (db.type != DSA_DB_BRIDGE) + return -EOPNOTSUPP; + + return gswip_port_fdb(ds, port, db.bridge.dev, addr, vid, true); +} + +static int gswip_port_fdb_del(struct dsa_switch *ds, int port, + const unsigned char *addr, u16 vid, + struct dsa_db db) +{ + if (db.type != DSA_DB_BRIDGE) + return -EOPNOTSUPP; + + return gswip_port_fdb(ds, port, db.bridge.dev, addr, vid, false); +} + +static int gswip_port_fdb_dump(struct dsa_switch *ds, int port, + dsa_fdb_dump_cb_t *cb, void *data) +{ + struct gswip_priv *priv = ds->priv; + struct gswip_pce_table_entry mac_bridge = {0,}; + unsigned char addr[ETH_ALEN]; + int i; + int err; + + for (i = 0; i < 2048; i++) { + mac_bridge.table = GSWIP_TABLE_MAC_BRIDGE; + mac_bridge.index = i; + + err = gswip_pce_table_entry_read(priv, &mac_bridge); + if (err) { + dev_err(priv->dev, + "failed to read mac bridge entry %d: %d\n", + i, err); + return err; + } + + if (!mac_bridge.valid) + continue; + + addr[5] = mac_bridge.key[0] & 0xff; + addr[4] = (mac_bridge.key[0] >> 8) & 0xff; + addr[3] = mac_bridge.key[1] & 0xff; + addr[2] = (mac_bridge.key[1] >> 8) & 0xff; + addr[1] = mac_bridge.key[2] & 0xff; + addr[0] = (mac_bridge.key[2] >> 8) & 0xff; + if (mac_bridge.val[1] & GSWIP_TABLE_MAC_BRIDGE_VAL1_STATIC) { + if (mac_bridge.val[0] & BIT(port)) { + err = cb(addr, 0, true, data); + if (err) + return err; + } + } else { + if (port == FIELD_GET(GSWIP_TABLE_MAC_BRIDGE_VAL0_PORT, + mac_bridge.val[0])) { + err = cb(addr, 0, false, data); + if (err) + return err; + } + } + } + return 0; +} + +static int gswip_port_max_mtu(struct dsa_switch *ds, int port) +{ + /* Includes 8 bytes for special header. */ + return GSWIP_MAX_PACKET_LENGTH - VLAN_ETH_HLEN - ETH_FCS_LEN; +} + +static int gswip_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) +{ + struct gswip_priv *priv = ds->priv; + + /* CPU port always has maximum mtu of user ports, so use it to set + * switch frame size, including 8 byte special header. + */ + if (dsa_is_cpu_port(ds, port)) { + new_mtu += 8; + regmap_write(priv->gswip, GSWIP_MAC_FLEN, + VLAN_ETH_HLEN + new_mtu + ETH_FCS_LEN); + } + + /* Enable MLEN for ports with non-standard MTUs, including the special + * header on the CPU port added above. + */ + if (new_mtu != ETH_DATA_LEN) + regmap_set_bits(priv->gswip, GSWIP_MAC_CTRL_2p(port), + GSWIP_MAC_CTRL_2_MLEN); + else + regmap_clear_bits(priv->gswip, GSWIP_MAC_CTRL_2p(port), + GSWIP_MAC_CTRL_2_MLEN); + + return 0; +} + +static void gswip_phylink_get_caps(struct dsa_switch *ds, int port, + struct phylink_config *config) +{ + struct gswip_priv *priv = ds->priv; + + priv->hw_info->phylink_get_caps(ds, port, config); +} + +static void gswip_port_set_link(struct gswip_priv *priv, int port, bool link) +{ + u32 mdio_phy; + + if (link) + mdio_phy = GSWIP_MDIO_PHY_LINK_UP; + else + mdio_phy = GSWIP_MDIO_PHY_LINK_DOWN; + + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_LINK_MASK, mdio_phy); +} + +static void gswip_port_set_speed(struct gswip_priv *priv, int port, int speed, + phy_interface_t interface) +{ + u32 mdio_phy = 0, mii_cfg = 0, mac_ctrl_0 = 0; + + switch (speed) { + case SPEED_10: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M10; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M2P5; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_100: + mdio_phy = GSWIP_MDIO_PHY_SPEED_M100; + + if (interface == PHY_INTERFACE_MODE_RMII) + mii_cfg = GSWIP_MII_CFG_RATE_M50; + else + mii_cfg = GSWIP_MII_CFG_RATE_M25; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_MII; + break; + + case SPEED_1000: + mdio_phy = GSWIP_MDIO_PHY_SPEED_G1; + + mii_cfg = GSWIP_MII_CFG_RATE_M125; + + mac_ctrl_0 = GSWIP_MAC_CTRL_0_GMII_RGMII; + break; + } + + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_SPEED_MASK, mdio_phy); + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_RATE_MASK, mii_cfg, port); + regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), + GSWIP_MAC_CTRL_0_GMII_MASK, mac_ctrl_0); +} + +static void gswip_port_set_duplex(struct gswip_priv *priv, int port, int duplex) +{ + u32 mac_ctrl_0, mdio_phy; + + if (duplex == DUPLEX_FULL) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_EN; + mdio_phy = GSWIP_MDIO_PHY_FDUP_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FDUP_DIS; + mdio_phy = GSWIP_MDIO_PHY_FDUP_DIS; + } + + regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), + GSWIP_MAC_CTRL_0_FDUP_MASK, mac_ctrl_0); + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_FDUP_MASK, mdio_phy); +} + +static void gswip_port_set_pause(struct gswip_priv *priv, int port, + bool tx_pause, bool rx_pause) +{ + u32 mac_ctrl_0, mdio_phy; + + if (tx_pause && rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RXTX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_EN; + } else if (tx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_TX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_EN | + GSWIP_MDIO_PHY_FCONRX_DIS; + } else if (rx_pause) { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_RX; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_EN; + } else { + mac_ctrl_0 = GSWIP_MAC_CTRL_0_FCON_NONE; + mdio_phy = GSWIP_MDIO_PHY_FCONTX_DIS | + GSWIP_MDIO_PHY_FCONRX_DIS; + } + + regmap_write_bits(priv->gswip, GSWIP_MAC_CTRL_0p(port), + GSWIP_MAC_CTRL_0_FCON_MASK, mac_ctrl_0); + regmap_write_bits(priv->mdio, GSWIP_MDIO_PHYp(port), + GSWIP_MDIO_PHY_FCONTX_MASK | GSWIP_MDIO_PHY_FCONRX_MASK, + mdio_phy); +} + +static void gswip_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + int port = dp->index; + u32 miicfg = 0; + + miicfg |= GSWIP_MII_CFG_LDCLKDIS; + + switch (state->interface) { + case PHY_INTERFACE_MODE_SGMII: + case PHY_INTERFACE_MODE_1000BASEX: + case PHY_INTERFACE_MODE_2500BASEX: + return; + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_INTERNAL: + miicfg |= GSWIP_MII_CFG_MODE_MIIM; + break; + case PHY_INTERFACE_MODE_REVMII: + miicfg |= GSWIP_MII_CFG_MODE_MIIP; + break; + case PHY_INTERFACE_MODE_RMII: + miicfg |= GSWIP_MII_CFG_MODE_RMIIM; + break; + case PHY_INTERFACE_MODE_RGMII: + case PHY_INTERFACE_MODE_RGMII_ID: + case PHY_INTERFACE_MODE_RGMII_RXID: + case PHY_INTERFACE_MODE_RGMII_TXID: + miicfg |= GSWIP_MII_CFG_MODE_RGMII; + break; + case PHY_INTERFACE_MODE_GMII: + miicfg |= GSWIP_MII_CFG_MODE_GMII; + break; + default: + dev_err(dp->ds->dev, + "Unsupported interface: %d\n", state->interface); + return; + } + + gswip_mii_mask_cfg(priv, + GSWIP_MII_CFG_MODE_MASK | GSWIP_MII_CFG_RMII_CLK | + GSWIP_MII_CFG_RGMII_IBS | GSWIP_MII_CFG_LDCLKDIS, + miicfg, port); + + switch (state->interface) { + case PHY_INTERFACE_MODE_RGMII_ID: + gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK | + GSWIP_MII_PCDU_RXDLY_MASK, 0, port); + break; + case PHY_INTERFACE_MODE_RGMII_RXID: + gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_RXDLY_MASK, 0, port); + break; + case PHY_INTERFACE_MODE_RGMII_TXID: + gswip_mii_mask_pcdu(priv, GSWIP_MII_PCDU_TXDLY_MASK, 0, port); + break; + default: + break; + } +} + +static void gswip_phylink_mac_link_down(struct phylink_config *config, + unsigned int mode, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + int port = dp->index; + + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, 0, port); + + if (!dsa_port_is_cpu(dp)) + gswip_port_set_link(priv, port, false); +} + +static void gswip_phylink_mac_link_up(struct phylink_config *config, + struct phy_device *phydev, + unsigned int mode, + phy_interface_t interface, + int speed, int duplex, + bool tx_pause, bool rx_pause) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + int port = dp->index; + + if (!dsa_port_is_cpu(dp)) { + gswip_port_set_link(priv, port, true); + gswip_port_set_speed(priv, port, speed, interface); + gswip_port_set_duplex(priv, port, duplex); + gswip_port_set_pause(priv, port, tx_pause, rx_pause); + } + + gswip_mii_mask_cfg(priv, GSWIP_MII_CFG_EN, GSWIP_MII_CFG_EN, port); +} + +static void gswip_get_strings(struct dsa_switch *ds, int port, u32 stringset, + uint8_t *data) +{ + int i; + + if (stringset != ETH_SS_STATS) + return; + + for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) + ethtool_puts(&data, gswip_rmon_cnt[i].name); +} + +static u32 gswip_bcm_ram_entry_read(struct gswip_priv *priv, u32 table, + u32 index) +{ + u32 result, val; + int err; + + regmap_write(priv->gswip, GSWIP_BM_RAM_ADDR, index); + regmap_write_bits(priv->gswip, GSWIP_BM_RAM_CTRL, + GSWIP_BM_RAM_CTRL_ADDR_MASK | GSWIP_BM_RAM_CTRL_OPMOD | + GSWIP_BM_RAM_CTRL_BAS, + table | GSWIP_BM_RAM_CTRL_BAS); + + err = gswip_switch_r_timeout(priv, GSWIP_BM_RAM_CTRL, + GSWIP_BM_RAM_CTRL_BAS); + if (err) { + dev_err(priv->dev, "timeout while reading table: %u, index: %u\n", + table, index); + return 0; + } + + regmap_read(priv->gswip, GSWIP_BM_RAM_VAL(0), &result); + regmap_read(priv->gswip, GSWIP_BM_RAM_VAL(1), &val); + result |= val << 16; + + return result; +} + +static void gswip_get_ethtool_stats(struct dsa_switch *ds, int port, + uint64_t *data) +{ + struct gswip_priv *priv = ds->priv; + const struct gswip_rmon_cnt_desc *rmon_cnt; + int i; + u64 high; + + for (i = 0; i < ARRAY_SIZE(gswip_rmon_cnt); i++) { + rmon_cnt = &gswip_rmon_cnt[i]; + + data[i] = gswip_bcm_ram_entry_read(priv, port, + rmon_cnt->offset); + if (rmon_cnt->size == 2) { + high = gswip_bcm_ram_entry_read(priv, port, + rmon_cnt->offset + 1); + data[i] |= high << 32; + } + } +} + +static int gswip_get_sset_count(struct dsa_switch *ds, int port, int sset) +{ + if (sset != ETH_SS_STATS) + return 0; + + return ARRAY_SIZE(gswip_rmon_cnt); +} + +static struct phylink_pcs *gswip_phylink_mac_select_pcs(struct phylink_config *config, + phy_interface_t interface) +{ + struct dsa_port *dp = dsa_phylink_to_port(config); + struct gswip_priv *priv = dp->ds->priv; + + if (priv->hw_info->mac_select_pcs) + return priv->hw_info->mac_select_pcs(config, interface); + + return NULL; +} + +static const struct phylink_mac_ops gswip_phylink_mac_ops = { + .mac_config = gswip_phylink_mac_config, + .mac_link_down = gswip_phylink_mac_link_down, + .mac_link_up = gswip_phylink_mac_link_up, + .mac_select_pcs = gswip_phylink_mac_select_pcs, +}; + +static const struct dsa_switch_ops gswip_switch_ops = { + .get_tag_protocol = gswip_get_tag_protocol, + .setup = gswip_setup, + .port_setup = gswip_port_setup, + .port_enable = gswip_port_enable, + .port_disable = gswip_port_disable, + .port_bridge_join = gswip_port_bridge_join, + .port_bridge_leave = gswip_port_bridge_leave, + .port_fast_age = gswip_port_fast_age, + .port_vlan_filtering = gswip_port_vlan_filtering, + .port_vlan_add = gswip_port_vlan_add, + .port_vlan_del = gswip_port_vlan_del, + .port_stp_state_set = gswip_port_stp_state_set, + .port_fdb_add = gswip_port_fdb_add, + .port_fdb_del = gswip_port_fdb_del, + .port_fdb_dump = gswip_port_fdb_dump, + .port_change_mtu = gswip_port_change_mtu, + .port_max_mtu = gswip_port_max_mtu, + .phylink_get_caps = gswip_phylink_get_caps, + .get_strings = gswip_get_strings, + .get_ethtool_stats = gswip_get_ethtool_stats, + .get_sset_count = gswip_get_sset_count, +}; + +void gswip_disable_switch(struct gswip_priv *priv) +{ + regmap_clear_bits(priv->mdio, GSWIP_MDIO_GLOB, GSWIP_MDIO_GLOB_ENABLE); +} +EXPORT_SYMBOL_GPL(gswip_disable_switch); + +static int gswip_validate_cpu_port(struct dsa_switch *ds) +{ + struct gswip_priv *priv = ds->priv; + struct dsa_port *cpu_dp; + int cpu_port = -1; + + dsa_switch_for_each_cpu_port(cpu_dp, ds) { + if (cpu_port != -1) + return dev_err_probe(ds->dev, -EINVAL, + "only a single CPU port is supported\n"); + + cpu_port = cpu_dp->index; + } + + if (cpu_port == -1) + return dev_err_probe(ds->dev, -EINVAL, "no CPU port defined\n"); + + if (BIT(cpu_port) & ~priv->hw_info->allowed_cpu_ports) + return dev_err_probe(ds->dev, -EINVAL, + "unsupported CPU port defined\n"); + + return 0; +} + +int gswip_probe_common(struct gswip_priv *priv, u32 version) +{ + int err; + + mutex_init(&priv->pce_table_lock); + + priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL); + if (!priv->ds) + return -ENOMEM; + + priv->ds->dev = priv->dev; + priv->ds->num_ports = priv->hw_info->max_ports; + priv->ds->ops = &gswip_switch_ops; + priv->ds->phylink_mac_ops = &gswip_phylink_mac_ops; + priv->ds->priv = priv; + + /* The hardware has the 'major/minor' version bytes in the wrong order + * preventing numerical comparisons. Construct a 16-bit unsigned integer + * having the REV field as most significant byte and the MOD field as + * least significant byte. This is effectively swapping the two bytes of + * the version variable, but other than using swab16 it doesn't affect + * the source variable. + */ + priv->version = GSWIP_VERSION_REV(version) << 8 | + GSWIP_VERSION_MOD(version); + + err = dsa_register_switch(priv->ds); + if (err) + return dev_err_probe(priv->dev, err, "dsa switch registration failed\n"); + + err = gswip_validate_cpu_port(priv->ds); + if (err) + goto disable_switch; + + dev_info(priv->dev, "probed GSWIP version %lx mod %lx\n", + GSWIP_VERSION_REV(version), GSWIP_VERSION_MOD(version)); + + return 0; + +disable_switch: + gswip_disable_switch(priv); + dsa_unregister_switch(priv->ds); + + return err; +} +EXPORT_SYMBOL_GPL(gswip_probe_common); + +MODULE_AUTHOR("Hauke Mehrtens "); +MODULE_AUTHOR("Daniel Golle "); +MODULE_DESCRIPTION("Lantiq / Intel / MaxLinear GSWIP common functions"); +MODULE_LICENSE("GPL"); -- 2.51.0