From: Shangjuan Wei <weishangjuan@eswincomputing.com>

Add ESWIN EIC7700 Ethernet controller, supporting clock
configuration, delay adjustment and speed adaptive functions.

Signed-off-by: Zhi Li <lizhi2@eswincomputing.com>
Signed-off-by: Shangjuan Wei <weishangjuan@eswincomputing.com>
---
 .../bindings/net/eswin,eic7700-eth.yaml       | 128 ++++++++++++++++++
 1 file changed, 128 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml

diff --git a/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
new file mode 100644
index 000000000000..9771fed9604e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/eswin,eic7700-eth.yaml
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/eswin,eic7700-eth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eswin EIC7700 SOC Eth Controller
+
+maintainers:
+  - Shuang Liang <liangshuang@eswincomputing.com>
+  - Zhi Li <lizhi2@eswincomputing.com>
+  - Shangjuan Wei <weishangjuan@eswincomputing.com>
+
+description:
+  Platform glue layer implementation for STMMAC Ethernet driver.
+
+select:
+  properties:
+    compatible:
+      contains:
+        enum:
+          - eswin,eic7700-qos-eth
+  required:
+    - compatible
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+properties:
+  compatible:
+    items:
+      - const: eswin,eic7700-qos-eth
+      - const: snps,dwmac-5.20
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-names:
+    const: macirq
+
+  clocks:
+    items:
+      - description: AXI clock
+      - description: Configuration clock
+      - description: GMAC main clock
+      - description: Tx clock
+
+  clock-names:
+    items:
+      - const: axi
+      - const: cfg
+      - const: stmmaceth
+      - const: tx
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    items:
+      - const: stmmaceth
+
+  rx-internal-delay-ps:
+    enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400]
+
+  tx-internal-delay-ps:
+    enum: [0, 200, 600, 1200, 1600, 1800, 2000, 2200, 2400]
+
+  eswin,hsp-sp-csr:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - description: Phandle to HSP(High-Speed Peripheral) device
+      - description: Offset of phy control register for internal
+                     or external clock selection
+      - description: Offset of AXI clock controller Low-Power request
+                     register
+      - description: Offset of register controlling TX/RX clock delay
+    description: |
+      High-Speed Peripheral device needed to configure clock selection,
+      clock low-power mode and clock delay.
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - interrupts
+  - interrupt-names
+  - phy-mode
+  - resets
+  - reset-names
+  - rx-internal-delay-ps
+  - tx-internal-delay-ps
+  - eswin,hsp-sp-csr
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@50400000 {
+        compatible = "eswin,eic7700-qos-eth", "snps,dwmac-5.20";
+        reg = <0x50400000 0x10000>;
+        clocks = <&d0_clock 186>, <&d0_clock 171>, <&d0_clock 40>,
+                <&d0_clock 193>;
+        clock-names = "axi", "cfg", "stmmaceth", "tx";
+        interrupt-parent = <&plic>;
+        interrupts = <61>;
+        interrupt-names = "macirq";
+        phy-mode = "rgmii-id";
+        phy-handle = <&phy0>;
+        resets = <&reset 95>;
+        reset-names = "stmmaceth";
+        rx-internal-delay-ps = <200>;
+        tx-internal-delay-ps = <200>;
+        eswin,hsp-sp-csr = <&hsp_sp_csr 0x100 0x108 0x118>;
+        snps,axi-config = <&stmmac_axi_setup>;
+        snps,aal;
+        snps,fixed-burst;
+        snps,tso;
+        stmmac_axi_setup: stmmac-axi-config {
+            snps,blen = <0 0 0 0 16 8 4>;
+            snps,rd_osr_lmt = <2>;
+            snps,wr_osr_lmt = <2>;
+        };
+    };
--
2.17.1