After a lot of digging, it seems that the oddly named hw->ps member is all about setting the core into reverse SGMII speed. When set to a non-zero value, it: 1. Configures the MAC at initialisation time to operate at a specific speed. 2. It _incorrectly_ enables the transmitter (GMAC_CONFIG_TE) which makes no sense, rather than enabling the "transmit configuration" bit (GMAC_CONFIG_TC). 3. It configures the SGMII rate adapter layer to retrieve its speed setting from the MAC configuration register rather than the PHY. In the previous commit, we removed (1) and (2) as phylink overwrites the configuration set at that step. Thus, the only functional aspect is (3), which is a boolean operation. This means there is no need to store the actual speed, and just have a boolean flag. Convert the priv->ps member to a boolean, and rename it to priv->reverse_sgmii_enable to make it more understandable. Signed-off-by: Russell King (Oracle) --- drivers/net/ethernet/stmicro/stmmac/common.h | 2 +- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 6 +++--- 2 files changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 8ff3406cdfbf..87c3f0dd54f0 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -599,13 +599,13 @@ struct mac_device_info { unsigned int mcast_bits_log2; unsigned int rx_csum; unsigned int pcs; - unsigned int ps; unsigned int xlgmac; unsigned int num_vlan; u32 vlan_filter[32]; bool vlan_fail_q_en; u8 vlan_fail_q; bool hw_vlan_en; + bool reverse_sgmii_enable; }; struct stmmac_rx_routing { diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index a90df69ac43f..dff3bba83969 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3476,10 +3476,10 @@ static int stmmac_hw_setup(struct net_device *dev) if ((speed == SPEED_10) || (speed == SPEED_100) || (speed == SPEED_1000)) { - priv->hw->ps = speed; + priv->hw->reverse_sgmii_enable = true; } else { dev_warn(priv->device, "invalid port speed\n"); - priv->hw->ps = 0; + priv->hw->reverse_sgmii_enable = false; } } @@ -3520,7 +3520,7 @@ static int stmmac_hw_setup(struct net_device *dev) } if (priv->hw->pcs) - stmmac_pcs_ctrl_ane(priv, 1, priv->hw->ps); + stmmac_pcs_ctrl_ane(priv, 1, priv->hw->reverse_sgmii_enable); /* set TX and RX rings length */ stmmac_set_rings_length(priv); -- 2.47.3