Add a test for a learning VXLAN device that snoops a known MAC. The first case moves the MAC from an on-link IPv4 remote to a remote behind a router, and checks that traffic to the MAC still flows. Its pings run on one CPU, because the route cache is per CPU and only the CPU that filled it hits the stale entry. This case fails while the device keeps the route cached for the previous remote. The second case moves the MAC from a global IPv6 remote to a link-local one, and checks that the FDB entry records the new output interface. Both remotes are on-link, so this case checks the interface, not the route cache. The third case adds a dynamic entry with a "via" device, and checks that traffic from the entry's remote leaves the device in place. This test was written with the help of an AI coding assistant. Signed-off-by: Zhefu Peng --- tools/testing/selftests/net/Makefile | 1 + .../selftests/net/test_vxlan_snoop_move.sh | 222 ++++++++++++++++++ 2 files changed, 223 insertions(+) create mode 100755 tools/testing/selftests/net/test_vxlan_snoop_move.sh diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile index baea3e7f0..69d440c5b 100644 --- a/tools/testing/selftests/net/Makefile +++ b/tools/testing/selftests/net/Makefile @@ -118,6 +118,7 @@ TEST_PROGS := \ test_vxlan_mdb.sh \ test_vxlan_nh.sh \ test_vxlan_nolocalbypass.sh \ + test_vxlan_snoop_move.sh \ test_vxlan_under_vrf.sh \ test_vxlan_vnifilter_notify.sh \ test_vxlan_vnifiltering.sh \ diff --git a/tools/testing/selftests/net/test_vxlan_snoop_move.sh b/tools/testing/selftests/net/test_vxlan_snoop_move.sh new file mode 100755 index 000000000..e1f0ebb19 --- /dev/null +++ b/tools/testing/selftests/net/test_vxlan_snoop_move.sh @@ -0,0 +1,222 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Check that a learning VXLAN device fully updates a remote when snooping +# moves a known MAC to another VTEP: +# +# - The route cached for the old remote is dropped. The old remote is +# on-link and the new one is behind a router, so a stale cached route +# blackholes traffic to the moved MAC. +# - The output interface follows the new remote. The MAC moves from a +# global IPv6 address to a link-local one, which needs an interface. +# - Traffic from the remote of a dynamic entry keeps the entry's "via" +# device. + +# shellcheck disable=SC2154,SC2329 # set by setup_ns, run by tests_run +source lib.sh + +ALL_TESTS=" + test_move_behind_router + test_move_to_link_local + test_same_remote_keeps_via +" + +MAC=02:00:c0:a8:00:0a + +ping_ns() +{ + local ns=$1; shift + + ip netns exec "$ns" ping -c 3 -W 1 -i 0.2 "$@" &> /dev/null +} + +ping_pinned() +{ + local ns=$1; shift + + taskset -c "$CPU" ip netns exec "$ns" ping -c 3 -W 1 -i 0.2 "$@" \ + &> /dev/null +} + +add_sw_port() +{ + local ns=$1; shift + local dev=$1; shift + local port=$1; shift + + ip link add "$dev" netns "$ns" type veth peer name "$port" netns "$sw" + ip -n "$sw" link set "$port" master br0 up + ip -n "$ns" link set "$dev" up +} + +test_move_behind_router() +{ + local name="IPv4 move to a remote behind a router" + + RET=0 + + if ! setup_ns sw ex a r b; then + log_test_skip "$name" + return + fi + defer cleanup_ns "$sw" "$ex" "$a" "$r" "$b" + + ip -n "$sw" link add br0 up type bridge + add_sw_port "$ex" e0 s-e + add_sw_port "$a" a0 s-a + add_sw_port "$r" r0 s-r + ip link add r1 netns "$r" type veth peer name b0 netns "$b" + ip -n "$r" link set r1 up + ip -n "$b" link set b0 up + + ip -n "$ex" addr add 10.0.1.1/24 dev e0 + ip -n "$ex" route add default via 10.0.1.254 + ip -n "$a" addr add 10.0.1.2/24 dev a0 + ip -n "$r" addr add 10.0.1.254/24 dev r0 + ip -n "$r" addr add 10.0.2.254/24 dev r1 + ip netns exec "$r" sysctl -wq net.ipv4.ip_forward=1 + ip -n "$b" addr add 10.0.2.2/24 dev b0 + ip -n "$b" route add default via 10.0.2.254 + + ip -n "$ex" link add vx0 type vxlan id 42 dstport 4789 \ + local 10.0.1.1 learning + bridge -n "$ex" fdb append 00:00:00:00:00:00 dev vx0 dst 10.0.1.2 + bridge -n "$ex" fdb append 00:00:00:00:00:00 dev vx0 dst 10.0.2.2 + ip -n "$ex" addr add 192.168.0.1/24 dev vx0 + ip -n "$ex" link set vx0 up + + ip -n "$a" link add vx0 address "$MAC" type vxlan id 42 dstport 4789 \ + local 10.0.1.2 remote 10.0.1.1 + ip -n "$b" link add vx0 address "$MAC" type vxlan id 42 dstport 4789 \ + local 10.0.2.2 remote 10.0.1.1 + ip -n "$a" addr add 192.168.0.10/24 dev vx0 + ip -n "$b" addr add 192.168.0.10/24 dev vx0 + ip -n "$a" link set vx0 up + + ping_pinned "$ex" 192.168.0.10 + check_err $? "ping before the move failed" + + ip -n "$a" link set vx0 down + ip -n "$b" link set vx0 up + ip netns exec "$b" ping -c 1 -W 1 192.168.0.1 &> /dev/null + + bridge -n "$ex" fdb show dev vx0 | grep -q "$MAC dst 10.0.2.2 " + check_err $? "fdb entry did not move to the new remote" + + ping_pinned "$ex" 192.168.0.10 + check_err $? "ping after the move failed" + + log_test "$name" +} + +test_move_to_link_local() +{ + local name="IPv6 move from a global to a link-local remote" + local ns + + RET=0 + + if ! setup_ns sw ex a b; then + log_test_skip "$name" + return + fi + defer cleanup_ns "$sw" "$ex" "$a" "$b" + + for ns in "$sw" "$ex" "$a" "$b"; do + ip netns exec "$ns" sysctl -wq net.ipv6.conf.all.accept_dad=0 + ip netns exec "$ns" sysctl -wq \ + net.ipv6.conf.default.accept_dad=0 + done + + ip -n "$sw" link add br0 up type bridge + add_sw_port "$ex" e0 s-e + add_sw_port "$a" a0 s-a + add_sw_port "$b" b0 s-b + + ip -n "$ex" addr add 2001:db8:1::1/64 dev e0 nodad + ip -n "$ex" addr add fe80::1/64 dev e0 nodad + ip -n "$a" addr add 2001:db8:1::2/64 dev a0 nodad + ip -n "$b" addr add fe80::b/64 dev b0 nodad + + ip -n "$ex" link add vx0 type vxlan id 42 dstport 4789 \ + local 2001:db8:1::1 learning + bridge -n "$ex" fdb append 00:00:00:00:00:00 dev vx0 dst 2001:db8:1::2 + bridge -n "$ex" fdb append 00:00:00:00:00:00 dev vx0 dst fe80::b via e0 + ip -n "$ex" addr add 192.168.0.1/24 dev vx0 + ip -n "$ex" link set vx0 up + + ip -n "$a" link add vx0 address "$MAC" type vxlan id 42 dstport 4789 \ + local 2001:db8:1::2 remote 2001:db8:1::1 + ip -n "$b" link add vx0 address "$MAC" type vxlan id 42 dstport 4789 \ + local fe80::b remote fe80::1 dev b0 nolearning + ip -n "$a" addr add 192.168.0.10/24 dev vx0 + ip -n "$b" addr add 192.168.0.10/24 dev vx0 + ip -n "$a" link set vx0 up + + ping_ns "$ex" 192.168.0.10 + check_err $? "ping before the move failed" + + ip -n "$a" link set vx0 down + ip -n "$b" link set vx0 up + ip netns exec "$b" ping -c 1 -W 1 192.168.0.1 &> /dev/null + + bridge -n "$ex" fdb show dev vx0 | grep -q "$MAC dst fe80::b via e0 " + check_err $? "fdb entry did not move to the new remote and interface" + + ping_ns "$ex" 192.168.0.10 + check_err $? "ping after the move failed" + + log_test "$name" +} + +test_same_remote_keeps_via() +{ + local name="Traffic from the same remote keeps the via device" + + RET=0 + + if ! setup_ns sw ex a; then + log_test_skip "$name" + return + fi + defer cleanup_ns "$sw" "$ex" "$a" + + ip -n "$sw" link add br0 up type bridge + add_sw_port "$ex" e0 s-e + add_sw_port "$a" a0 s-a + + ip -n "$ex" addr add 10.0.1.1/24 dev e0 + ip -n "$a" addr add 10.0.1.2/24 dev a0 + + ip -n "$ex" link add vx0 type vxlan id 42 dstport 4789 \ + local 10.0.1.1 learning + bridge -n "$ex" fdb add "$MAC" dev vx0 dst 10.0.1.2 via e0 dynamic + ip -n "$ex" addr add 192.168.0.1/24 dev vx0 + ip -n "$ex" link set vx0 up + + ip -n "$a" link add vx0 address "$MAC" type vxlan id 42 dstport 4789 \ + local 10.0.1.2 remote 10.0.1.1 + ip -n "$a" addr add 192.168.0.10/24 dev vx0 + ip -n "$a" link set vx0 up + + ping_ns "$a" 192.168.0.1 + check_err $? "ping from the remote failed" + + bridge -n "$ex" fdb show dev vx0 | grep -q "$MAC dst 10.0.1.2 via e0 " + check_err $? "fdb entry lost its via device" + + log_test "$name" +} + +cleanup() +{ + defer_scopes_cleanup +} + +require_command taskset +CPU=$(taskset -pc $$ | sed 's/.*: //; s/[-,].*//') + +trap cleanup EXIT +tests_run + +exit "$EXIT_STATUS" -- 2.54.0