phy_support_eee() copies supported_eee into advertising_eee unconditionally, overwriting any filtering applied during phy_probe() based on DT eee-broken-* properties or driver-populated eee_disabled_modes. MAC drivers that call phy_support_eee() after probe (e.g. bcmgenet, fec, lan743x, lan78xx, r8169) then cause the PHY to advertise EEE for modes the user marked as broken. The symptom is that ethtool --show-eee on the local interface reports "not supported" (supported & ~eee_disabled_modes is empty) while the link partner sees EEE negotiated and active. phy_probe() already filters advertising_eee via eee_disabled_modes after calling of_set_phy_eee_broken(). Apply the same mask in phy_support_eee() so the filtering survives the copy. Fixes: 49168d1980e2 ("net: phy: Add phy_support_eee() indicating MAC support EEE") Signed-off-by: Nicolai Buchwitz --- drivers/net/phy/phy_device.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index c2cdf1ae354249c033445f2d942e07220205b41c..83b074bc4a8f716b3e10c8ff57aff7c7abba0236 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -2903,7 +2903,8 @@ EXPORT_SYMBOL_GPL(phy_advertise_eee_all); */ void phy_support_eee(struct phy_device *phydev) { - linkmode_copy(phydev->advertising_eee, phydev->supported_eee); + linkmode_andnot(phydev->advertising_eee, phydev->supported_eee, + phydev->eee_disabled_modes); phydev->eee_cfg.tx_lpi_enabled = true; phydev->eee_cfg.eee_enabled = true; -- 2.51.0