From: David Jander The reset pins for the LPOUT lines were incorrectly prefixed with "GPOUT" instead of "LPOUT" in the gpio-line-names array. Fix these typos so the pin names consistently match the LPOUT0-4 signals they belong to. Fixes: 8267753c891c ("ARM: dts: stm32: Add MECIO1 and MECT1S board variants") Cc: Signed-off-by: David Jander Co-developed-by: Oleksij Rempel Signed-off-by: Oleksij Rempel --- arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi index f91b3d1f037b..e50e9ae085e8 100644 --- a/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi +++ b/arch/arm/boot/dts/st/stm32mp15x-mecio1-io.dtsi @@ -185,14 +185,14 @@ &gpiod { &gpioe { gpio-line-names = "HPOUT0_RESETN", "HPOUT1", "HPOUT1_ALERTN", "", "", "", "HPOUT1_RESETN", - "LPOUT0", "LPOUT0_ALERTN", "GPOUT0_RESETN", - "LPOUT1", "LPOUT1_ALERTN", "GPOUT1_RESETN", - "LPOUT2", "LPOUT2_ALERTN", "GPOUT2_RESETN"; + "LPOUT0", "LPOUT0_ALERTN", "LPOUT0_RESETN", + "LPOUT1", "LPOUT1_ALERTN", "LPOUT1_RESETN", + "LPOUT2", "LPOUT2_ALERTN", "LPOUT2_RESETN"; }; &gpiof { - gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "GPOUT3_RESETN", - "LPOUT4", "LPOUT4_ALERTN", "GPOUT4_RESETN", + gpio-line-names = "LPOUT3", "LPOUT3_ALERTN", "LPOUT3_RESETN", + "LPOUT4", "LPOUT4_ALERTN", "LPOUT4_RESETN", "", "", "", "", "", "", "", "", "", ""; -- 2.47.3