Update the node for the DW9800K for correctness. Now we correctly select SAC3 mode and enable timing-control with the newly updated device tree bindings. This is a breaking change for a part that was previously functioning, but only due to manual register writes in the driver. Now that we have the correct documentation we are able to update everything to ensure functionality with other devices using this part. Signed-off-by: Griffin Kroah-Hartman --- arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts index f41ad446a39e2308abaea68a6b31a7e387881bf2..a657a5dcba9cdf750fab2478ca319f3a592ea295 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts @@ -665,8 +665,9 @@ camera_imx858_dw9800k: actuator@e { reg = <0x0e>; vdd-supply = <&vreg_afvdd_2p8>; - dongwoon,sac-mode = <1>; - dongwoon,vcm-prescale = <16>; + dongwoon,sac-mode = <3>; + dongwoon,vcm-prescale = <0>; + dongwoon,timing-control = <16>; }; /* IMX858 @ 29 */ -- 2.43.0