Zero out auth_status on initialization. Otherwise, garbage will leak from the stack to the firmware (when ssid is less than 32 bytes and/or when params->pmkid is set). Then, pass the params->pmkid to the firmware (without it, the firmware caches a garbage PMKID on successful authentication and denies a subsequent association request that includes the PMKID). Signed-off-by: Bogdan Nicolae --- v2: Split into a separate patch drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c index 873754be5..2c59b5e57 100644 --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cyw/core.c @@ -200,7 +200,7 @@ brcmf_cyw_external_auth(struct wiphy *wiphy, struct net_device *dev, { struct brcmf_if *ifp; struct brcmf_pub *drvr; - struct brcmf_auth_req_status_le auth_status; + struct brcmf_auth_req_status_le auth_status = {}; int ret = 0; brcmf_dbg(TRACE, "Enter\n"); @@ -208,6 +208,8 @@ brcmf_cyw_external_auth(struct wiphy *wiphy, struct net_device *dev, ifp = netdev_priv(dev); drvr = ifp->drvr; if (params->status == WLAN_STATUS_SUCCESS) { + if (params->pmkid) + memcpy(auth_status.pmkid, params->pmkid, WLAN_PMKID_LEN); auth_status.flags = cpu_to_le16(BRCMF_EXTAUTH_SUCCESS); } else { bphy_err(drvr, "External authentication failed: status=%d\n", -- 2.55.0