The buckpbus accessors only need an MDIO device, but they take a phy_device, which ties them to a probed PHY. An upcoming MDIO device driver needs the same register access before any phy_device exists, since it runs precisely to make the PHY presentable. Retype the internal helpers onto an mdio_device and keep the exported phy_device API as page-selecting wrappers that pass &phydev->mdio. The EN8811H driver already reaches the AN8811HB pbus through an mdio_device, so this follows an existing direction rather than opening a new one. No functional change. Assisted-by: LLM Signed-off-by: Aleksei Sviridkin --- drivers/net/phy/air_phy_lib.c | 80 ++++++++++++++++++----------------- 1 file changed, 42 insertions(+), 38 deletions(-) diff --git a/drivers/net/phy/air_phy_lib.c b/drivers/net/phy/air_phy_lib.c index 5141db19fa5e..e314717843ae 100644 --- a/drivers/net/phy/air_phy_lib.c +++ b/drivers/net/phy/air_phy_lib.c @@ -14,31 +14,32 @@ #include "air_phy_lib.h" -static int __air_buckpbus_reg_read(struct phy_device *phydev, +static int __air_buckpbus_reg_read(struct mdio_device *mdiodev, u32 pbus_address, u32 *pbus_data) { int pbus_data_low, pbus_data_high; int ret; - ret = __phy_write(phydev, AIR_BPBUS_MODE, AIR_BPBUS_MODE_ADDR_FIXED); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_MODE, + AIR_BPBUS_MODE_ADDR_FIXED); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_RD_ADDR_HIGH, - upper_16_bits(pbus_address)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_RD_ADDR_HIGH, + upper_16_bits(pbus_address)); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_RD_ADDR_LOW, - lower_16_bits(pbus_address)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_RD_ADDR_LOW, + lower_16_bits(pbus_address)); if (ret < 0) return ret; - pbus_data_high = __phy_read(phydev, AIR_BPBUS_RD_DATA_HIGH); + pbus_data_high = __mdiodev_read(mdiodev, AIR_BPBUS_RD_DATA_HIGH); if (pbus_data_high < 0) return pbus_data_high; - pbus_data_low = __phy_read(phydev, AIR_BPBUS_RD_DATA_LOW); + pbus_data_low = __mdiodev_read(mdiodev, AIR_BPBUS_RD_DATA_LOW); if (pbus_data_low < 0) return pbus_data_low; @@ -46,64 +47,66 @@ static int __air_buckpbus_reg_read(struct phy_device *phydev, return 0; } -static int __air_buckpbus_reg_write(struct phy_device *phydev, +static int __air_buckpbus_reg_write(struct mdio_device *mdiodev, u32 pbus_address, u32 pbus_data) { int ret; - ret = __phy_write(phydev, AIR_BPBUS_MODE, AIR_BPBUS_MODE_ADDR_FIXED); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_MODE, + AIR_BPBUS_MODE_ADDR_FIXED); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_HIGH, - upper_16_bits(pbus_address)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_WR_ADDR_HIGH, + upper_16_bits(pbus_address)); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_LOW, - lower_16_bits(pbus_address)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_WR_ADDR_LOW, + lower_16_bits(pbus_address)); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_HIGH, - upper_16_bits(pbus_data)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_WR_DATA_HIGH, + upper_16_bits(pbus_data)); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_LOW, - lower_16_bits(pbus_data)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_WR_DATA_LOW, + lower_16_bits(pbus_data)); if (ret < 0) return ret; return 0; } -static int __air_buckpbus_reg_modify(struct phy_device *phydev, +static int __air_buckpbus_reg_modify(struct mdio_device *mdiodev, u32 pbus_address, u32 mask, u32 set) { int pbus_data_low, pbus_data_high; u32 pbus_data_old, pbus_data_new; int ret; - ret = __phy_write(phydev, AIR_BPBUS_MODE, AIR_BPBUS_MODE_ADDR_FIXED); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_MODE, + AIR_BPBUS_MODE_ADDR_FIXED); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_RD_ADDR_HIGH, - upper_16_bits(pbus_address)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_RD_ADDR_HIGH, + upper_16_bits(pbus_address)); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_RD_ADDR_LOW, - lower_16_bits(pbus_address)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_RD_ADDR_LOW, + lower_16_bits(pbus_address)); if (ret < 0) return ret; - pbus_data_high = __phy_read(phydev, AIR_BPBUS_RD_DATA_HIGH); + pbus_data_high = __mdiodev_read(mdiodev, AIR_BPBUS_RD_DATA_HIGH); if (pbus_data_high < 0) return pbus_data_high; - pbus_data_low = __phy_read(phydev, AIR_BPBUS_RD_DATA_LOW); + pbus_data_low = __mdiodev_read(mdiodev, AIR_BPBUS_RD_DATA_LOW); if (pbus_data_low < 0) return pbus_data_low; @@ -112,23 +115,23 @@ static int __air_buckpbus_reg_modify(struct phy_device *phydev, if (pbus_data_new == pbus_data_old) return 0; - ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_HIGH, - upper_16_bits(pbus_address)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_WR_ADDR_HIGH, + upper_16_bits(pbus_address)); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_WR_ADDR_LOW, - lower_16_bits(pbus_address)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_WR_ADDR_LOW, + lower_16_bits(pbus_address)); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_HIGH, - upper_16_bits(pbus_data_new)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_WR_DATA_HIGH, + upper_16_bits(pbus_data_new)); if (ret < 0) return ret; - ret = __phy_write(phydev, AIR_BPBUS_WR_DATA_LOW, - lower_16_bits(pbus_data_new)); + ret = __mdiodev_write(mdiodev, AIR_BPBUS_WR_DATA_LOW, + lower_16_bits(pbus_data_new)); if (ret < 0) return ret; @@ -144,7 +147,8 @@ int air_phy_buckpbus_reg_read(struct phy_device *phydev, u32 pbus_address, saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4); if (saved_page >= 0) { - ret = __air_buckpbus_reg_read(phydev, pbus_address, pbus_data); + ret = __air_buckpbus_reg_read(&phydev->mdio, pbus_address, + pbus_data); if (ret < 0) phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__, pbus_address, ret); @@ -163,7 +167,7 @@ int air_phy_buckpbus_reg_write(struct phy_device *phydev, u32 pbus_address, saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4); if (saved_page >= 0) { - ret = __air_buckpbus_reg_write(phydev, pbus_address, + ret = __air_buckpbus_reg_write(&phydev->mdio, pbus_address, pbus_data); if (ret < 0) phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__, @@ -183,8 +187,8 @@ int air_phy_buckpbus_reg_modify(struct phy_device *phydev, u32 pbus_address, saved_page = phy_select_page(phydev, AIR_PHY_PAGE_EXTENDED_4); if (saved_page >= 0) { - ret = __air_buckpbus_reg_modify(phydev, pbus_address, mask, - set); + ret = __air_buckpbus_reg_modify(&phydev->mdio, pbus_address, + mask, set); if (ret < 0) phydev_err(phydev, "%s 0x%08x failed: %d\n", __func__, pbus_address, ret); -- 2.53.0