When #size-cells > 1 it is preferred to have each entry as its own tuple, to make it easier to identify addresses and sizes. Update artpec6.dtsi to use preferred style to increase readability. While at it, also move the inline comments in the pcie node to the same lines as the entries and shorten one of them a bit to fit under 100 chars. These changes fix indent-consistent and continuation-alignment warnings from dt-check-style in strict mode, e.g. warnings like: axis/artpec6.dtsi:170: [indent-consistent] indent mismatch (expected depth 2 * '\t') axis/artpec6.dtsi:172: [continuation-alignment] continuation should align to column 26 (to < or ") Signed-off-by: Henrik Grimler --- arch/arm/boot/dts/axis/artpec6.dtsi | 20 +++++++++----------- 1 file changed, 9 insertions(+), 11 deletions(-) diff --git a/arch/arm/boot/dts/axis/artpec6.dtsi b/arch/arm/boot/dts/axis/artpec6.dtsi index d6610f62ca25..2f75a9df0963 100644 --- a/arch/arm/boot/dts/axis/artpec6.dtsi +++ b/arch/arm/boot/dts/axis/artpec6.dtsi @@ -161,17 +161,15 @@ pmu { */ pcie: pcie@f8050000 { compatible = "axis,artpec6-pcie", "snps,dw-pcie"; - reg = <0xf8050000 0x2000 - 0xf8040000 0x1000 - 0xc0000000 0x2000>; + reg = <0xf8050000 0x2000>, + <0xf8040000 0x1000>, + <0xc0000000 0x2000>; reg-names = "dbi", "phy", "config"; #address-cells = <3>; #size-cells = <2>; device_type = "pci"; - /* downstream I/O */ - ranges = <0x81000000 0 0 0xc0002000 0 0x00010000 - /* non-prefetchable memory */ - 0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; + ranges = <0x81000000 0 0 0xc0002000 0 0x00010000>, /* downstream I/O */ + <0x82000000 0 0xc0012000 0xc0012000 0 0x1ffee000>; /* non-prefetchable */ num-lanes = <2>; bus-range = <0x00 0xff>; interrupts = ; @@ -188,10 +186,10 @@ pcie: pcie@f8050000 { pcie_ep: pcie-ep@f8050000 { compatible = "axis,artpec6-pcie-ep", "snps,dw-pcie"; - reg = <0xf8050000 0x2000 - 0xf8051000 0x2000 - 0xf8040000 0x1000 - 0xc0000000 0x20000000>; + reg = <0xf8050000 0x2000>, + <0xf8051000 0x2000>, + <0xf8040000 0x1000>, + <0xc0000000 0x20000000>; reg-names = "dbi", "dbi2", "phy", "addr_space"; num-ib-windows = <6>; num-ob-windows = <2>; -- 2.43.0