The brcm,bcm7445-switch-v4.0.txt binding is already covered by dsa/brcm,sf2.yaml. The listed deprecated properties aren't used anywhere either. Signed-off-by: Rob Herring (Arm) --- .../bindings/net/brcm,bcm7445-switch-v4.0.txt | 50 ------------------- 1 file changed, 50 deletions(-) delete mode 100644 Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt diff --git a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt b/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt deleted file mode 100644 index 284cddb3118e..000000000000 --- a/Documentation/devicetree/bindings/net/brcm,bcm7445-switch-v4.0.txt +++ /dev/null @@ -1,50 +0,0 @@ -* Broadcom Starfighter 2 integrated switch - -See dsa/brcm,bcm7445-switch-v4.0.yaml for the documentation. - -*Deprecated* binding required properties: - -- dsa,mii-bus: phandle to the MDIO bus controller, see dsa/dsa.txt -- dsa,ethernet: phandle to the CPU network interface controller, see dsa/dsa.txt -- #address-cells: must be 2, see dsa/dsa.txt - -Example using the old DSA DeviceTree binding: - -switch_top@f0b00000 { - compatible = "simple-bus"; - #size-cells = <1>; - #address-cells = <1>; - ranges = <0 0xf0b00000 0x40804>; - - ethernet_switch@0 { - compatible = "brcm,bcm7445-switch-v4.0"; - #size-cells = <0>; - #address-cells = <2>; - reg = <0x0 0x40000 - 0x40000 0x110 - 0x40340 0x30 - 0x40380 0x30 - 0x40400 0x34 - 0x40600 0x208>; - interrupts = <0 0x18 0 - 0 0x19 0>; - brcm,num-gphy = <1>; - brcm,num-rgmii-ports = <2>; - brcm,fcb-pause-override; - brcm,acb-packets-inflight; - - ... - switch@0 { - reg = <0 0>; - #size-cells = <0>; - #address-cells = <1>; - - port@0 { - label = "gphy"; - reg = <0>; - brcm,use-bcm-hdr; - }; - ... - }; - }; -}; -- 2.51.0