During a successful reset the driver would re-allocate vport resources while keeping the netdevs intact. However, in case of an error in the init task, the netdev of the failing vport will be unregistered, effectively removing the network interface: [ 121.211076] idpf 0000:83:00.0: enabling device (0100 -> 0102) [ 121.221976] idpf 0000:83:00.0: Device HW Reset initiated [ 124.161229] idpf 0000:83:00.0 ens801f0: renamed from eth0 [ 124.163364] idpf 0000:83:00.0 ens801f0d1: renamed from eth1 [ 125.934656] idpf 0000:83:00.0 ens801f0d2: renamed from eth2 [ 128.218429] idpf 0000:83:00.0 ens801f0d3: renamed from eth3 ip -br a ens801f0 UP ens801f0d1 UP ens801f0d2 UP ens801f0d3 UP echo 1 > /sys/class/net/ens801f0/device/reset [ 145.885537] idpf 0000:83:00.0: resetting [ 145.990280] idpf 0000:83:00.0: reset done [ 146.284766] idpf 0000:83:00.0: HW reset detected [ 146.296610] idpf 0000:83:00.0: Device HW Reset initiated [ 211.556719] idpf 0000:83:00.0: Transaction timed-out (op:526 cookie:7700 vc_op:526 salt:77 timeout:60000ms) [ 272.996705] idpf 0000:83:00.0: Transaction timed-out (op:502 cookie:7800 vc_op:502 salt:78 timeout:60000ms) ip -br a ens801f0d1 DOWN ens801f0d2 DOWN ens801f0d3 DOWN Re-shuffle the logic in the error path of the init task to make sure the netdevs remain intact. This will allow the driver to attempt recovery via subsequent resets, provided the FW is still functional. The main change is to make sure that idpf_decfg_netdev() is not called should the init task fail during a reset. The error handling is consolidated under unwind_vports, as the removed labels had the same cleanup logic split depending on the point of failure. Fixes: ce1b75d0635c ("idpf: add ptypes and MAC filter support") Signed-off-by: Emil Tantilov Reviewed-by: Aleksandr Loktionov --- drivers/net/ethernet/intel/idpf/idpf_lib.c | 17 ++++++----------- 1 file changed, 6 insertions(+), 11 deletions(-) diff --git a/drivers/net/ethernet/intel/idpf/idpf_lib.c b/drivers/net/ethernet/intel/idpf/idpf_lib.c index bd38ecc7872c..2a53f3d504d2 100644 --- a/drivers/net/ethernet/intel/idpf/idpf_lib.c +++ b/drivers/net/ethernet/intel/idpf/idpf_lib.c @@ -1604,6 +1604,10 @@ void idpf_init_task(struct work_struct *work) goto unwind_vports; } + err = idpf_send_get_rx_ptype_msg(vport); + if (err) + goto unwind_vports; + index = vport->idx; vport_config = adapter->vport_config[index]; @@ -1616,15 +1620,11 @@ void idpf_init_task(struct work_struct *work) err = idpf_check_supported_desc_ids(vport); if (err) { dev_err(&pdev->dev, "failed to get required descriptor ids\n"); - goto cfg_netdev_err; + goto unwind_vports; } if (idpf_cfg_netdev(vport)) - goto cfg_netdev_err; - - err = idpf_send_get_rx_ptype_msg(vport); - if (err) - goto handle_err; + goto unwind_vports; /* Once state is put into DOWN, driver is ready for dev_open */ np = netdev_priv(vport->netdev); @@ -1671,11 +1671,6 @@ void idpf_init_task(struct work_struct *work) return; -handle_err: - idpf_decfg_netdev(vport); -cfg_netdev_err: - idpf_vport_rel(vport); - adapter->vports[index] = NULL; unwind_vports: if (default_vport) { for (index = 0; index < adapter->max_vports; index++) { -- 2.37.3