Add a DeviceTree binding to describe the TLMM block on Qualcomm's
Shikra SoC.

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Signed-off-by: Komal Bajaj <komal.bajaj@oss.qualcomm.com>
---
 .../bindings/pinctrl/qcom,shikra-tlmm.yaml         | 123 +++++++++++++++++++++
 1 file changed, 123 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,shikra-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,shikra-tlmm.yaml
new file mode 100644
index 000000000000..411c402f9044
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,shikra-tlmm.yaml
@@ -0,0 +1,123 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,shikra-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Shikra TLMM block
+
+maintainers:
+  - Komal Bajaj <komal.bajaj@oss.qualcomm.com>
+
+description: |
+  Top Level Mode Multiplexer pin controller in Qualcomm Shikra SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,shikra-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 83
+
+  gpio-line-names:
+    maxItems: 166
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-shikra-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-shikra-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-shikra-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-5][0-9]|16[0-5])$"
+            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
+                      sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+
+        enum: [ gpio, agera_pll, atest_bbrx, atest_char, atest_gpsadc,
+                atest_tsens, atest_usb, cam_mclk, cci_async, cci_i2c0,
+                cci_i2c1, cci_timer, char_exec, cri_trng, dac_calib,
+                dbg_out_clk, ddr_bist, ddr_pxi, dmic, emac_dll, emac_mcg,
+                emac_phy, emac0_ptp_aux, emac0_ptp_pps, emac1_ptp_aux,
+                emac1_ptp_pps, ext_mclk, gcc_gp, gsm0_tx, i2s0, i2s1,
+                i2s2, i2s3, jitter_bist, m_voc, mdp_vsync_e, mdp_vsync_out0,
+                mdp_vsync_out1, mdp_vsync_p, mdp_vsync_s, mpm_pwr, mss_lte,
+                nav_gpio, pa_indicator_or, pbs_in, pbs_out, pcie0_clk_req_n,
+                phase_flag, pll, prng_rosc, pwm, qdss_cti, qup0_se0,
+                qup0_se1, qup0_se1_01, qup0_se1_23, qup0_se2, qup0_se3_01,
+                qup0_se3_23, qup0_se4_01, qup0_se4_23, qup0_se5, qup0_se6,
+                qup0_se7_01, qup0_se7_23, qup0_se8, qup0_se9, qup0_se9_01,
+                qup0_se9_23, rgmii, sd_write_protect, sdc_cdc, sdc_tb_trig,
+                ssbi_wtr, swr0_rx, swr0_tx, tgu_ch_trigout, tsc_async,
+                tsense_pwm, uim1, uim2, unused_adsp, unused_gsm1, usb0_phy_ps,
+                vfr, vsense_trigger_mirnat, wlan ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    tlmm: pinctrl@500000 {
+        compatible = "qcom,shikra-tlmm";
+        reg = <0x00500000 0x800000>;
+
+        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gpio-ranges = <&tlmm 0 0 166>;
+
+        qup-uart0-default-state {
+            pins = "gpio0", "gpio1";
+            function = "qup0_se1";
+            drive-strength = <2>;
+            bias-disable;
+        };
+    };
+...

-- 
2.34.1