Enable CRC checking for received and transmitted frames, and configure counters to clear after being read within config_init() for accurate counter recording. Additionally, add PHY counter operations and integrate shared functions. Signed-off-by: Luo Jie --- drivers/net/phy/qcom/qca808x.c | 23 +++++++++++++++++++++++ 1 file changed, 23 insertions(+) diff --git a/drivers/net/phy/qcom/qca808x.c b/drivers/net/phy/qcom/qca808x.c index 6de16c0eaa08..8eb51b1a006c 100644 --- a/drivers/net/phy/qcom/qca808x.c +++ b/drivers/net/phy/qcom/qca808x.c @@ -93,6 +93,7 @@ MODULE_LICENSE("GPL"); struct qca808x_priv { int led_polarity_mode; + struct qcom_phy_hw_stats hw_stats; }; static int qca808x_phy_fast_retrain_config(struct phy_device *phydev) @@ -243,6 +244,10 @@ static int qca808x_config_init(struct phy_device *phydev) qca808x_fill_possible_interfaces(phydev); + ret = qcom_phy_counter_config(phydev); + if (ret) + return ret; + /* Configure adc threshold as 100mv for the link 10M */ return at803x_debug_reg_mask(phydev, QCA808X_PHY_DEBUG_ADC_THRESHOLD, QCA808X_ADC_THRESHOLD_MASK, @@ -622,6 +627,22 @@ static int qca808x_led_polarity_set(struct phy_device *phydev, int index, active_low ? 0 : QCA808X_LED_ACTIVE_HIGH); } +static int qca808x_update_stats(struct phy_device *phydev) +{ + struct qca808x_priv *priv = phydev->priv; + + return qcom_phy_update_stats(phydev, &priv->hw_stats); +} + +static void qca808x_get_phy_stats(struct phy_device *phydev, + struct ethtool_eth_phy_stats *eth_stats, + struct ethtool_phy_stats *stats) +{ + struct qca808x_priv *priv = phydev->priv; + + qcom_phy_get_stats(stats, priv->hw_stats); +} + static struct phy_driver qca808x_driver[] = { { /* Qualcomm QCA8081 */ @@ -651,6 +672,8 @@ static struct phy_driver qca808x_driver[] = { .led_hw_control_set = qca808x_led_hw_control_set, .led_hw_control_get = qca808x_led_hw_control_get, .led_polarity_set = qca808x_led_polarity_set, + .update_stats = qca808x_update_stats, + .get_phy_stats = qca808x_get_phy_stats, }, }; module_phy_driver(qca808x_driver); -- 2.34.1