Switching a persistent GPIO line from input to output acquires a runtime PM reference on the parent device, but if the subsequent regmap_update_bits() fails the reference is never dropped and no later direction_in() can balance it since the direction was never changed. Drop the reference on the update failure path. Fixes: 27a49ed17e22 ("gpio: arizona: Add support for GPIOs that need to be maintained") Cc: stable@vger.kernel.org Signed-off-by: Wentao Liang --- drivers/gpio/gpio-arizona.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpio/gpio-arizona.c b/drivers/gpio/gpio-arizona.c index a7e98d395d8e..88cf013f0d90 100644 --- a/drivers/gpio/gpio-arizona.c +++ b/drivers/gpio/gpio-arizona.c @@ -115,8 +115,12 @@ static int arizona_gpio_direction_out(struct gpio_chip *chip, if (value) value = ARIZONA_GPN_LVL; - return regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset, - ARIZONA_GPN_DIR | ARIZONA_GPN_LVL, value); + ret = regmap_update_bits(arizona->regmap, ARIZONA_GPIO1_CTRL + offset, + ARIZONA_GPN_DIR | ARIZONA_GPN_LVL, value); + if (ret < 0 && (val & ARIZONA_GPN_DIR) && persistent) + pm_runtime_put_autosuspend(chip->parent); + + return ret; } static int arizona_gpio_set(struct gpio_chip *chip, unsigned int offset, -- 2.34.1