Currently in the return path, fwnode_handle_put calls are missing. Just use _scoped to avoid the issue. Fixes: 24e31e474769 ("net: mdio: Add RTL9300 MDIO driver") Signed-off-by: Rosen Penev --- drivers/net/mdio/mdio-realtek-rtl9300.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/drivers/net/mdio/mdio-realtek-rtl9300.c b/drivers/net/mdio/mdio-realtek-rtl9300.c index 33694c3ff9a7..405a07075dd1 100644 --- a/drivers/net/mdio/mdio-realtek-rtl9300.c +++ b/drivers/net/mdio/mdio-realtek-rtl9300.c @@ -354,7 +354,6 @@ static int rtl9300_mdiobus_probe_one(struct device *dev, struct rtl9300_mdio_pri struct fwnode_handle *node) { struct rtl9300_mdio_chan *chan; - struct fwnode_handle *child; struct mii_bus *bus; u32 mdio_bus; int err; @@ -371,7 +370,7 @@ static int rtl9300_mdiobus_probe_one(struct device *dev, struct rtl9300_mdio_pri * compatible = "ethernet-phy-ieee802.3-c45". This does mean we can't * support both c45 and c22 on the same MDIO bus. */ - fwnode_for_each_child_node(node, child) + fwnode_for_each_child_node_scoped(node, child) if (fwnode_device_is_compatible(child, "ethernet-phy-ieee802.3-c45")) priv->smi_bus_is_c45[mdio_bus] = true; @@ -409,7 +408,6 @@ static int rtl9300_mdiobus_map_ports(struct device *dev) { struct rtl9300_mdio_priv *priv = dev_get_drvdata(dev); struct device *parent = dev->parent; - struct fwnode_handle *port; int err; struct fwnode_handle *ports __free(fwnode_handle) = @@ -418,7 +416,7 @@ static int rtl9300_mdiobus_map_ports(struct device *dev) return dev_err_probe(dev, -EINVAL, "%pfwP missing ethernet-ports\n", dev_fwnode(parent)); - fwnode_for_each_child_node(ports, port) { + fwnode_for_each_child_node_scoped(ports, port) { struct device_node *mdio_dn; u32 addr; u32 bus; -- 2.52.0