MT8196 uses a combination of set/clr registers to control the PLL enable state, along with a FENC bit to check the preparation status. Add new set of PLL clock operations with support for set/clr enable and FENC status logic. Reviewed-by: NĂ­colas F. R. A. Prado Reviewed-by: AngeloGioacchino Del Regno Signed-off-by: Laura Nao --- drivers/clk/mediatek/clk-pll.c | 42 +++++++++++++++++++++++++++++++++- drivers/clk/mediatek/clk-pll.h | 5 ++++ 2 files changed, 46 insertions(+), 1 deletion(-) diff --git a/drivers/clk/mediatek/clk-pll.c b/drivers/clk/mediatek/clk-pll.c index 49ca25dd5418..8f46de77f42d 100644 --- a/drivers/clk/mediatek/clk-pll.c +++ b/drivers/clk/mediatek/clk-pll.c @@ -37,6 +37,13 @@ int mtk_pll_is_prepared(struct clk_hw *hw) return (readl(pll->en_addr) & BIT(pll->data->pll_en_bit)) != 0; } +static int mtk_pll_fenc_is_prepared(struct clk_hw *hw) +{ + struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); + + return readl(pll->fenc_addr) & pll->fenc_mask; +} + static unsigned long __mtk_pll_recalc_rate(struct mtk_clk_pll *pll, u32 fin, u32 pcw, int postdiv) { @@ -274,6 +281,25 @@ void mtk_pll_unprepare(struct clk_hw *hw) writel(r, pll->pwr_addr); } +static int mtk_pll_prepare_setclr(struct clk_hw *hw) +{ + struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); + + writel(BIT(pll->data->pll_en_bit), pll->en_set_addr); + + /* Wait 20us after enable for the PLL to stabilize */ + udelay(20); + + return 0; +} + +static void mtk_pll_unprepare_setclr(struct clk_hw *hw) +{ + struct mtk_clk_pll *pll = to_mtk_clk_pll(hw); + + writel(BIT(pll->data->pll_en_bit), pll->en_clr_addr); +} + const struct clk_ops mtk_pll_ops = { .is_prepared = mtk_pll_is_prepared, .prepare = mtk_pll_prepare, @@ -283,6 +309,16 @@ const struct clk_ops mtk_pll_ops = { .set_rate = mtk_pll_set_rate, }; +const struct clk_ops mtk_pll_fenc_clr_set_ops = { + .is_prepared = mtk_pll_fenc_is_prepared, + .prepare = mtk_pll_prepare_setclr, + .unprepare = mtk_pll_unprepare_setclr, + .recalc_rate = mtk_pll_recalc_rate, + .round_rate = mtk_pll_round_rate, + .set_rate = mtk_pll_set_rate, +}; +EXPORT_SYMBOL_GPL(mtk_pll_fenc_clr_set_ops); + struct clk_hw *mtk_clk_register_pll_ops(struct mtk_clk_pll *pll, const struct mtk_pll_data *data, void __iomem *base, @@ -315,6 +351,9 @@ struct clk_hw *mtk_clk_register_pll_ops(struct mtk_clk_pll *pll, pll->hw.init = &init; pll->data = data; + pll->fenc_addr = base + data->fenc_sta_ofs; + pll->fenc_mask = BIT(data->fenc_sta_bit); + init.name = data->name; init.flags = (data->flags & PLL_AO) ? CLK_IS_CRITICAL : 0; init.ops = pll_ops; @@ -337,12 +376,13 @@ struct clk_hw *mtk_clk_register_pll(const struct mtk_pll_data *data, { struct mtk_clk_pll *pll; struct clk_hw *hw; + const struct clk_ops *pll_ops = data->ops ? data->ops : &mtk_pll_ops; pll = kzalloc(sizeof(*pll), GFP_KERNEL); if (!pll) return ERR_PTR(-ENOMEM); - hw = mtk_clk_register_pll_ops(pll, data, base, &mtk_pll_ops); + hw = mtk_clk_register_pll_ops(pll, data, base, pll_ops); if (IS_ERR(hw)) kfree(pll); diff --git a/drivers/clk/mediatek/clk-pll.h b/drivers/clk/mediatek/clk-pll.h index c4d06bb11516..7fdc5267a2b5 100644 --- a/drivers/clk/mediatek/clk-pll.h +++ b/drivers/clk/mediatek/clk-pll.h @@ -29,6 +29,7 @@ struct mtk_pll_data { u32 reg; u32 pwr_reg; u32 en_mask; + u32 fenc_sta_ofs; u32 pd_reg; u32 tuner_reg; u32 tuner_en_reg; @@ -51,6 +52,7 @@ struct mtk_pll_data { u32 en_clr_reg; u8 pll_en_bit; /* Assume 0, indicates BIT(0) by default */ u8 pcw_chg_bit; + u8 fenc_sta_bit; }; /* @@ -72,6 +74,8 @@ struct mtk_clk_pll { void __iomem *en_addr; void __iomem *en_set_addr; void __iomem *en_clr_addr; + void __iomem *fenc_addr; + u32 fenc_mask; const struct mtk_pll_data *data; }; @@ -82,6 +86,7 @@ void mtk_clk_unregister_plls(const struct mtk_pll_data *plls, int num_plls, struct clk_hw_onecell_data *clk_data); extern const struct clk_ops mtk_pll_ops; +extern const struct clk_ops mtk_pll_fenc_clr_set_ops; static inline struct mtk_clk_pll *to_mtk_clk_pll(struct clk_hw *hw) { -- 2.39.5