5.10-stable review patch. If anyone has any objections, please let me know. ------------------ From: Can Peng commit bcc6d886e5006a4656901d2d7fb6a215c96068a0 upstream. imx_thermal_runtime_resume() enables the thermal clock before powering up the sensor and enabling measurements. If either regmap_write() fails, the function returns with the clock still enabled. This leaves the clock enable count unbalanced after a failed runtime resume. Disable the clock on those failure paths before returning the error. Fixes: 4cf2ddf16e17 ("thermal/drivers/imx: Implement runtime PM support") Cc: stable@vger.kernel.org Signed-off-by: Can Peng Signed-off-by: Daniel Lezcano Reviewed-by: Frank Li Link: https://patch.msgid.link/20260722084909.463437-1-pengcan@kylinos.cn Signed-off-by: Greg Kroah-Hartman --- drivers/thermal/imx_thermal.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) --- a/drivers/thermal/imx_thermal.c +++ b/drivers/thermal/imx_thermal.c @@ -897,12 +897,12 @@ static int __maybe_unused imx_thermal_ru ret = regmap_write(map, socdata->sensor_ctrl + REG_CLR, socdata->power_down_mask); if (ret) - return ret; + goto disable_clk; ret = regmap_write(map, socdata->sensor_ctrl + REG_SET, socdata->measure_temp_mask); if (ret) - return ret; + goto disable_clk; /* * According to the temp sensor designers, it may require up to ~17us @@ -911,6 +911,11 @@ static int __maybe_unused imx_thermal_ru usleep_range(20, 50); return 0; + +disable_clk: + clk_disable_unprepare(data->thermal_clk); + + return ret; } static const struct dev_pm_ops imx_thermal_pm_ops = {