From: Grzegorz Nitka Update MAC Rx/Tx offset registers settings (PHY_MAC_[RX|TX]_OFFSET registers) with the data obtained with the latest research. It applies to PCS latency settings for the following speeds/modes: * 10Gb NO-FEC - TX latency changed from 71.25 ns to 73 ns - RX latency changed from -25.6 ns to -28 ns * 25Gb NO-FEC - TX latency changed from 28.17 ns to 33 ns - RX latency changed from -12.45 ns to -12 ns * 25Gb RS-FEC - TX latency changed from 64.5 ns to 69 ns - RX latency changed from -3.6 ns to -3 ns The original data came from simulation and pre-production hardware. The new data measures the actual delays and as such is more accurate. Fixes: 7cab44f1c35f ("ice: Introduce ETH56G PHY model for E825C products") Co-developed-by: Zoltan Fodor Signed-off-by: Zoltan Fodor Reviewed-by: Aleksandr Loktionov Reviewed-by: Jacob Keller Signed-off-by: Grzegorz Nitka Tested-by: Sunitha Mekala Signed-off-by: Jacob Keller --- drivers/net/ethernet/intel/ice/ice_ptp_consts.h | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h index 19dddd9b53dd..4d298c27bfb2 100644 --- a/drivers/net/ethernet/intel/ice/ice_ptp_consts.h +++ b/drivers/net/ethernet/intel/ice/ice_ptp_consts.h @@ -78,14 +78,14 @@ struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD] = { .blktime = 0x666, /* 3.2 */ .tx_offset = { .serdes = 0x234c, /* 17.6484848 */ - .no_fec = 0x8e80, /* 71.25 */ + .no_fec = 0x93d9, /* 73 */ .fc = 0xb4a4, /* 90.32 */ .sfd = 0x4a4, /* 2.32 */ .onestep = 0x4ccd /* 38.4 */ }, .rx_offset = { .serdes = 0xffffeb27, /* -10.42424 */ - .no_fec = 0xffffcccd, /* -25.6 */ + .no_fec = 0xffffc7b6, /* -28 */ .fc = 0xfffc557b, /* -469.26 */ .sfd = 0x4a4, /* 2.32 */ .bs_ds = 0x32 /* 0.0969697 */ @@ -118,17 +118,17 @@ struct ice_eth56g_mac_reg_cfg eth56g_mac_cfg[NUM_ICE_ETH56G_LNK_SPD] = { .mktime = 0x147b, /* 10.24, only if RS-FEC enabled */ .tx_offset = { .serdes = 0xe1e, /* 7.0593939 */ - .no_fec = 0x3857, /* 28.17 */ + .no_fec = 0x4266, /* 33 */ .fc = 0x48c3, /* 36.38 */ - .rs = 0x8100, /* 64.5 */ + .rs = 0x8a00, /* 69 */ .sfd = 0x1dc, /* 0.93 */ .onestep = 0x1eb8 /* 15.36 */ }, .rx_offset = { .serdes = 0xfffff7a9, /* -4.1697 */ - .no_fec = 0xffffe71a, /* -12.45 */ + .no_fec = 0xffffe700, /* -12 */ .fc = 0xfffe894d, /* -187.35 */ - .rs = 0xfffff8cd, /* -3.6 */ + .rs = 0xfffff8cc, /* -3 */ .sfd = 0x1dc, /* 0.93 */ .bs_ds = 0x14 /* 0.0387879, RS-FEC 0 */ } -- 2.53.0.1066.g1eceb487f285