A station which has a NSS ratio on the number of streams it is capable of in 160MHz VHT operation is supposed to use the 'Extended NSS BW Support' as defined by section '9.4.2.156.2 VHT Capabilities Information field'. This was missing in ieee80211_determine_our_sta_mode() and so we would wrongfully downgrade our bandwidth when connecting to an AP that supported 160MHz with messages such as: [ 37.638346] wlan1: AP XX:XX:XX:XX:XX:XX changed bandwidth in assoc response, new used config is 5280.000 MHz, width 3 (5290.000/0 MHz) Fixes: 310c8387c638 ("wifi: mac80211: clean up connection process") Signed-off-by: Nicolas Escande --- net/mac80211/mlme.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 810bea1aacc5..1f3f7fa79084 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -6009,7 +6009,8 @@ ieee80211_determine_our_sta_mode(struct ieee80211_sub_if_data *sdata, if (is_5ghz && !(vht_cap.cap & (IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ | - IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ))) { + IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ | + IEEE80211_VHT_CAP_EXT_NSS_BW_MASK))) { conn->bw_limit = IEEE80211_CONN_BW_LIMIT_80; mlme_link_id_dbg(sdata, link_id, "no VHT 160 MHz capability on 5 GHz, limiting to 80 MHz"); -- 2.53.0